blob: 4e319c192aca2fb95fd6f03d977ba845fe65ca05 [file] [log] [blame]
/*------------------------------------------------------------------------------+ */
/* */
/* This source code is dual-licensed. You may use it under the terms */
/* of the GNU General Public License version 2, or under the license */
/* below. */
/* */
/* This source code has been made available to you by IBM on an AS-IS */
/* basis. Anyone receiving this source is licensed under IBM */
/* copyrights to use it in any way he or she deems fit, including */
/* copying it, modifying it, compiling it, and redistributing it either */
/* with or without modifications. No license under IBM patents or */
/* patent applications is to be implied by the copyright license. */
/* */
/* Any user of this software should understand that IBM cannot provide */
/* technical support for this software and will not be responsible for */
/* any consequences resulting from the use of this software. */
/* */
/* Any person who transfers this source code or any derivative work */
/* must include the IBM copyright notice, this paragraph, and the */
/* preceding two paragraphs in the transferred software. */
/* */
/* COPYRIGHT I B M CORPORATION 1995 */
/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
/*------------------------------------------------------------------------------- */
/*----------------------------------------------------------------------------- */
/* Function: ext_bus_cntlr_init */
/* Description: Initializes the External Bus Controller for the external */
/* peripherals. IMPORTANT: For pass1 this code must run from */
/* cache since you can not reliably change a peripheral banks */
/* timing register (pbxap) while running code from that bank. */
/* For ex., since we are running from ROM on bank 0, we can NOT */
/* execute the code that modifies bank 0 timings from ROM, so */
/* we run it from cache. */
/* Bank 0 - Flash and SRAM */
/* Bank 1 - NVRAM/RTC */
/* Bank 2 - Keyboard/Mouse controller */
/* Bank 3 - IR controller */
/* Bank 4 - not used */
/* Bank 5 - not used */
/* Bank 6 - not used */
/* Bank 7 - FPGA registers */
/*----------------------------------------------------------------------------- */
#include <ppc4xx.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
.globl write_without_sync
write_without_sync:
/*
* Write one values to host via pci busmastering
* ptr = 0xc0000000 -> 0x01000000 (PCI)
* *ptr = 0x01234567;
*/
addi r31,0,0
lis r31,0xc000
start1:
lis r0,0x0123
ori r0,r0,0x4567
stw r0,0(r31)
/*
* Read one value back
* ptr = (volatile unsigned long *)addr;
* val = *ptr;
*/
lwz r0,0(r31)
/*
* One pci config write
* ibmPciConfigWrite(0x2e, 2, 0x1234);
*/
/* subsystem id */
li r4,0x002C
oris r4,r4,0x8000
lis r3,0xEEC0
stwbrx r4,0,r3
li r5,0x1234
ori r3,r3,0x4
stwbrx r5,0,r3
b start1
blr /* never reached !!!! */
.globl write_with_sync
write_with_sync:
/*
* Write one values to host via pci busmastering
* ptr = 0xc0000000 -> 0x01000000 (PCI)
* *ptr = 0x01234567;
*/
addi r31,0,0
lis r31,0xc000
start2:
lis r0,0x0123
ori r0,r0,0x4567
stw r0,0(r31)
/*
* Read one value back
* ptr = (volatile unsigned long *)addr;
* val = *ptr;
*/
lwz r0,0(r31)
/*
* One pci config write
* ibmPciConfigWrite(0x2e, 2, 0x1234);
*/
/* subsystem id */
li r4,0x002C
oris r4,r4,0x8000
lis r3,0xEEC0
stwbrx r4,0,r3
sync
li r5,0x1234
ori r3,r3,0x4
stwbrx r5,0,r3
sync
b start2
blr /* never reached !!!! */
.globl write_with_less_sync
write_with_less_sync:
/*
* Write one values to host via pci busmastering
* ptr = 0xc0000000 -> 0x01000000 (PCI)
* *ptr = 0x01234567;
*/
addi r31,0,0
lis r31,0xc000
start2b:
lis r0,0x0123
ori r0,r0,0x4567
stw r0,0(r31)
/*
* Read one value back
* ptr = (volatile unsigned long *)addr;
* val = *ptr;
*/
lwz r0,0(r31)
/*
* One pci config write
* ibmPciConfigWrite(0x2e, 2, 0x1234);
*/
/* subsystem id */
li r4,0x002C
oris r4,r4,0x8000
lis r3,0xEEC0
stwbrx r4,0,r3
sync
li r5,0x1234
ori r3,r3,0x4
stwbrx r5,0,r3
/* sync */
b start2b
blr /* never reached !!!! */
.globl write_with_more_sync
write_with_more_sync:
/*
* Write one values to host via pci busmastering
* ptr = 0xc0000000 -> 0x01000000 (PCI)
* *ptr = 0x01234567;
*/
addi r31,0,0
lis r31,0xc000
start3:
lis r0,0x0123
ori r0,r0,0x4567
stw r0,0(r31)
sync
/*
* Read one value back
* ptr = (volatile unsigned long *)addr;
* val = *ptr;
*/
lwz r0,0(r31)
sync
/*
* One pci config write
* ibmPciConfigWrite(0x2e, 2, 0x1234);
*/
/* subsystem id (PCIC0_SBSYSVID)*/
li r4,0x002C
oris r4,r4,0x8000
lis r3,0xEEC0
stwbrx r4,0,r3
sync
li r5,0x1234
ori r3,r3,0x4
stwbrx r5,0,r3
sync
b start3
blr /* never reached !!!! */