blob: 38dd49856bff57bff07cfbe0543e218e90baf8e6 [file] [log] [blame]
/*
* (C) Copyright 2002 ELTEC Elektronik AG
* Frank Gottschling <fgottschling@eltec.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* PCI initialisation for the MPC10x.
*/
#include <common.h>
#include <pci.h>
#include <mpc106.h>
#ifdef CONFIG_PCI
struct pci_controller local_hose;
void pci_init_board(void)
{
struct pci_controller* hose = (struct pci_controller *)&local_hose;
u32 reg32;
u16 reg16;
hose->first_busno = 0;
hose->last_busno = 0xff;
pci_set_region(hose->regions + 0,
CONFIG_SYS_PCI_MEMORY_BUS,
CONFIG_SYS_PCI_MEMORY_PHYS,
/*
* Attention: pci_hose_phys_to_bus() failes in address compare,
* so we need (CONFIG_SYS_PCI_MEMORY_SIZE-1)
*/
CONFIG_SYS_PCI_MEMORY_SIZE-1,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
/* PCI memory space */
pci_set_region(hose->regions + 1,
CONFIG_SYS_PCI_MEM_BUS,
CONFIG_SYS_PCI_MEM_PHYS,
CONFIG_SYS_PCI_MEM_SIZE,
PCI_REGION_MEM);
/* ISA/PCI memory space */
pci_set_region(hose->regions + 2,
CONFIG_SYS_ISA_MEM_BUS,
CONFIG_SYS_ISA_MEM_PHYS,
CONFIG_SYS_ISA_MEM_SIZE,
PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region(hose->regions + 3,
CONFIG_SYS_PCI_IO_BUS,
CONFIG_SYS_PCI_IO_PHYS,
CONFIG_SYS_PCI_IO_SIZE,
PCI_REGION_IO);
/* ISA/PCI I/O space */
pci_set_region(hose->regions + 4,
CONFIG_SYS_ISA_IO_BUS,
CONFIG_SYS_ISA_IO_PHYS,
CONFIG_SYS_ISA_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 5;
pci_setup_indirect(hose,
MPC106_REG_ADDR,
MPC106_REG_DATA);
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
/* Initialises the MPC10x PCI Configuration regs. */
pci_read_config_dword (PCI_BDF(0,0,0), PCI_PICR2, &reg32);
reg32 |= PICR2_CF_SNOOP_WS(3) |
PICR2_CF_FLUSH_L2 |
PICR2_CF_L2_HIT_DELAY(3) |
PICR2_CF_APHASE_WS(3);
reg32 &= ~(PICR2_L2_EN | PICR2_L2_UPDATE_EN);
pci_write_config_dword (PCI_BDF(0,0,0), PCI_PICR2, reg32);
pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
/* Clear non-reserved bits in status register */
pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
pci_read_config_dword (PCI_BDF(0,0,0), PCI_PICR1, &reg32);
reg32 |= PICR1_CF_CBA(63) |
PICR1_CF_BREAD_WS(2) |
PICR1_MCP_EN |
PICR1_CF_DPARK |
PICR1_PROC_TYPE_604 |
PICR1_CF_LOOP_SNOOP |
PICR1_CF_APARK;
pci_write_config_dword (PCI_BDF(0,0,0), PCI_PICR1, reg32);
}
#endif /* CONFIG_PCI */