| /* |
| * (C) Copyright 2006 |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <nand.h> |
| #include "cntmr/mvCntmr.h" |
| #include "uart/mvUart.h" |
| #include "nBootstrap.h" |
| #include <asm/io.h> |
| |
| #define CFG_NAND_READ_DELAY \ |
| { volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; } |
| |
| typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */ |
| |
| extern int board_nand_init(struct nand_chip *nand); |
| extern void mv_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd); |
| static void mv_nand_write_byte(struct mtd_info *mtd, u_char byte); |
| static u_char mv_nand_read_byte(struct mtd_info *mtd); |
| |
| |
| static int nand_is_bad_block(struct mtd_info *mtd, int block) |
| { |
| struct nand_chip *this = mtd->priv; |
| int page_addr = block * CFG_NAND_PAGE_COUNT; |
| |
| /* Begin command latch cycle */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_CLE | NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_SETCLE); |
| #ifdef MV_LARGE_PAGE |
| this->write_byte(mtd, NAND_CMD_READ0); |
| #else |
| this->write_byte(mtd, NAND_CMD_READOOB); |
| #endif |
| /* Set ALE and clear CLE to start address cycle */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_ALE | NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_CLRCLE); |
| //this->hwcontrol(mtd, NAND_CTL_SETALE); |
| #ifdef MV_LARGE_PAGE |
| /* Column address */ |
| this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */ |
| this->write_byte(mtd, 8); /* A[11:8] */ |
| /* Row address */ |
| this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[19:12] */ |
| this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[27:20] */ |
| this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x03)); /* A[29:28] */ |
| #else |
| /* Column address */ |
| this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */ |
| /* Row address */ |
| this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ |
| this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ |
| #endif |
| /* Latch in address */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_CLRALE); |
| #ifdef MV_LARGE_PAGE |
| /* Set command latch cycle */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_CLE | NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_SETCLE); |
| this->write_byte(mtd, NAND_CMD_READSTART); |
| /* Clear CLE to latch command cycle */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_CLRCLE); |
| #endif |
| |
| /* |
| * Wait a while for the data to be ready |
| */ |
| if (this->dev_ready) |
| this->dev_ready(mtd); |
| else |
| CFG_NAND_READ_DELAY; |
| |
| /* |
| * Read on byte |
| */ |
| if (this->read_byte(mtd) != 0xff) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) |
| { |
| struct nand_chip *this = mtd->priv; |
| int page_addr = page + block * CFG_NAND_PAGE_COUNT; |
| int i; |
| |
| /* Begin command latch cycle */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_CLE | NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_SETCLE); |
| this->write_byte(mtd, NAND_CMD_READ0); |
| /* Set ALE and clear CLE to start address cycle */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_ALE | NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_CLRCLE); |
| // this->hwcontrol(mtd, NAND_CTL_SETALE); |
| #ifdef MV_LARGE_PAGE |
| /* Column address */ |
| this->write_byte(mtd, 0); /* A[7:0] */ |
| this->write_byte(mtd, 0); /* A[11:8] */ |
| /* Row address */ |
| this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[19:12] */ |
| this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[27:20] */ |
| this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x03)); /* A[29:28] */ |
| #else |
| /* Column address */ |
| this->write_byte(mtd, 0); /* A[7:0] */ |
| /* Row address */ |
| this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ |
| this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ |
| #endif |
| /* Latch in address */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_CLRALE); |
| #ifdef MV_LARGE_PAGE |
| /* End command latch cycle */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_CLE | NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_SETCLE); |
| this->write_byte(mtd, NAND_CMD_READSTART); |
| /* Set clear CLE to start address cycle */ |
| this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_CTRL_CHANGE); |
| //->hwcontrol(mtd, NAND_CTL_CLRCLE); |
| #endif |
| |
| /* |
| * Wait a while for the data to be ready |
| */ |
| if (this->dev_ready) |
| this->dev_ready(mtd); |
| else |
| CFG_NAND_READ_DELAY; |
| |
| /* |
| * Read page into buffer |
| */ |
| for (i=0; i<CFG_NAND_PAGE_SIZE; i++) |
| *dst++ = this->read_byte(mtd); |
| |
| return 0; |
| } |
| |
| static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst) |
| { |
| int block; |
| int blockcopy_count; |
| int page; |
| |
| /* |
| * offs has to be aligned to a block address! |
| */ |
| block = offs / CFG_NAND_BLOCK_SIZE; |
| blockcopy_count = 0; |
| |
| while (blockcopy_count < (uboot_size / CFG_NAND_BLOCK_SIZE)) { |
| if (!nand_is_bad_block(mtd, block)) { |
| /* |
| * Skip bad blocks |
| */ |
| for (page = 0; page < CFG_NAND_PAGE_COUNT; page++) { |
| nand_read_page(mtd, block, page, dst); |
| dst += CFG_NAND_PAGE_SIZE; |
| } |
| |
| blockcopy_count++; |
| } |
| |
| block++; |
| /* End of NAND device */ |
| if (block >= NUM_BLOCKS) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| void nand_boot(void) |
| { |
| |
| ulong mem_size; |
| struct nand_chip nand_chip; |
| nand_info_t nand_info; |
| int ret; |
| |
| /* |
| * DRAM was init in nBootstrap.S so we have access to memory |
| */ |
| mem_size = 0x08000000; |
| |
| /* |
| * Init board specific nand support |
| */ |
| nand_info.priv = &nand_chip; |
| nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE; |
| nand_chip.dev_ready = NULL; /* preset to NULL */ |
| board_nand_init(&nand_chip); |
| |
| /* Add write and read byte functions */ |
| nand_chip.write_byte = mv_nand_write_byte; |
| nand_chip.read_byte = mv_nand_read_byte; |
| |
| /* |
| * Load U-Boot image from NAND into RAM |
| */ |
| ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE, |
| (uchar *)CFG_NAND_U_BOOT_DST); |
| if (ret != 0) |
| /* Error reading NAND */ |
| while(1); |
| |
| /* |
| * Jump to U-Boot image |
| */ |
| #if defined(MV_LARGE_PAGE) |
| VOIDFUNCPTR ubootStart = (VOIDFUNCPTR)(CFG_NAND_U_BOOT_START + 0x90000); |
| #else |
| VOIDFUNCPTR ubootStart = (VOIDFUNCPTR)(CFG_NAND_U_BOOT_START + 0x90000); |
| #endif |
| (*ubootStart)(); |
| } |
| |
| /** |
| * mv_nand_read_byte - [DEFAULT] read one byte to the chip |
| * @mtd: MTD device structure |
| * @byte: pointer to data byte to write |
| * |
| * Default read function for 8it buswith |
| */ |
| static u_char mv_nand_read_byte(struct mtd_info *mtd) |
| { |
| struct nand_chip *this = mtd->priv; |
| return readb(this->IO_ADDR_R); |
| } |
| |
| /** |
| * nand_write_byte - [DEFAULT] write one byte to the chip |
| * @mtd: MTD device structure |
| * @byte: pointer to data byte to write |
| * |
| * Default write function for 8it buswith |
| */ |
| static void mv_nand_write_byte(struct mtd_info *mtd, u_char byte) |
| { |
| struct nand_chip *this = mtd->priv; |
| writeb(byte, this->IO_ADDR_W); |
| } |