blob: b34d0406cbb506f9938ff45f1b026502c7c2c59d [file] [log] [blame]
Wind River SBC8548 reference board
Copyright 2007, Embedded Specialties, Inc.
Copyright 2007 Wind River Systemes, Inc.
1. Building U-Boot
The SBC8548 code is known to build using ELDK 4.1.
$ make sbc8548_config
Configuring for sbc8548 board...
$ make
2. Switch and Jumper Settings
All Jumpers & Switches are in their default positions. Please refer to
the board documentation for details. Some settings control CPU voltages
and settings may change with board revisions.
3. Known limitations
The code to support PCI is currently disabled and has not been verified.