| #!/bin/sh |
| |
| mkdir -p ${obj}include |
| mkdir -p ${obj}board/armltd/integrator |
| |
| config_file=${obj}include/config.h |
| |
| if [ "$1" = "ap" ] |
| then |
| # --------------------------------------------------------- |
| # Set the platform defines |
| # --------------------------------------------------------- |
| echo -n "/* Integrator configuration implied " > ${config_file} |
| echo " by Makefile target */" >> ${config_file} |
| echo -n "#define CONFIG_INTEGRATOR" >> ${config_file} |
| echo " /* Integrator board */" >> ${config_file} |
| echo -n "#define CONFIG_ARCH_INTEGRATOR" >> ${config_file} |
| echo " 1 /* Integrator/AP */" >> ${config_file} |
| # --------------------------------------------------------- |
| # Set the core module defines according to Core Module |
| # --------------------------------------------------------- |
| cpu="arm_intcm" |
| variant="unknown core module" |
| |
| if [ "$2" = "" ] |
| then |
| echo "$0:: No parameters - using arm_intcm" |
| else |
| case "$2" in |
| ap7_config) |
| cpu="arm_intcm" |
| variant="unported core module CM7TDMI" |
| ;; |
| |
| ap966) |
| cpu="arm_intcm" |
| variant="unported core module CM966E-S" |
| ;; |
| |
| ap922_config) |
| cpu="arm_intcm" |
| variant="unported core module CM922T" |
| ;; |
| |
| integratorap_config | \ |
| ap_config) |
| cpu="arm_intcm" |
| variant="unspecified core module" |
| ;; |
| |
| ap720t_config) |
| cpu="arm720t" |
| echo -n "#define CONFIG_CM720T" >> ${config_file} |
| echo " 1 /* CPU core is ARM720T */ " >> ${config_file} |
| variant="Core module CM720T" |
| ;; |
| |
| ap922_XA10_config) |
| cpu="arm_intcm" |
| variant="unported core module CM922T_XA10" |
| echo -n "#define CONFIG_CM922T_XA10" >> ${config_file} |
| echo " 1 /* CPU core is ARM922T_XA10 */" >> ${config_file} |
| ;; |
| |
| ap920t_config) |
| cpu="arm920t" |
| variant="Core module CM920T" |
| echo -n "#define CONFIG_CM920T" >> ${config_file} |
| echo " 1 /* CPU core is ARM920T */" >> ${config_file} |
| ;; |
| |
| ap926ejs_config) |
| cpu="arm926ejs" |
| variant="Core module CM926EJ-S" |
| echo -n "#define CONFIG_CM926EJ_S" >> ${config_file} |
| echo " 1 /* CPU core is ARM926EJ-S */ " >> ${config_file} |
| ;; |
| |
| ap946es_config) |
| cpu="arm946es" |
| variant="Core module CM946E-S" |
| echo -n "#define CONFIG_CM946E_S" >> ${config_file} |
| echo " 1 /* CPU core is ARM946E-S */ " >> ${config_file} |
| ;; |
| |
| *) |
| echo "$0:: Unknown core module" |
| variant="unknown core module" |
| cpu="arm_intcm" |
| ;; |
| |
| esac |
| fi |
| |
| case "$cpu" in |
| arm_intcm) |
| echo "/* Core module undefined/not ported */" >> ${config_file} |
| echo "#define CONFIG_ARM_INTCM 1" >> ${config_file} |
| echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> ${config_file} |
| echo -n " /* CM may not have " >> ${config_file} |
| echo "multiple SSRAM mapping */" >> ${config_file} |
| echo -n "#undef CONFIG_CM_SPD_DETECT " >> ${config_file} |
| echo -n " /* CM may not support SPD " >> ${config_file} |
| echo "query */" >> ${config_file} |
| echo -n "#undef CONFIG_CM_REMAP " >> ${config_file} |
| echo -n " /* CM may not support " >> ${config_file} |
| echo "remapping */" >> ${config_file} |
| echo -n "#undef CONFIG_CM_INIT " >> ${config_file} |
| echo -n " /* CM may not have " >> ${config_file} |
| echo "initialization reg */" >> ${config_file} |
| echo -n "#undef CONFIG_CM_TCRAM " >> ${config_file} |
| echo " /* CM may not have TCRAM */" >> ${config_file} |
| echo -n " /* May not be processor " >> ${config_file} |
| echo "without cache support */" >> ${config_file} |
| echo "#define CONFIG_SYS_NO_ICACHE 1" >> ${config_file} |
| echo "#define CONFIG_SYS_NO_DCACHE 1" >> ${config_file} |
| ;; |
| |
| arm720t) |
| echo -n " /* May not be processor " >> ${config_file} |
| echo "without cache support */" >> ${config_file} |
| echo "#define CONFIG_SYS_NO_ICACHE 1" >> ${config_file} |
| echo "#define CONFIG_SYS_NO_DCACHE 1" >> ${config_file} |
| ;; |
| esac |
| |
| else |
| |
| # --------------------------------------------------------- |
| # Set the platform defines |
| # --------------------------------------------------------- |
| echo -n "/* Integrator configuration implied " > ${config_file} |
| echo " by Makefile target */" >> ${config_file} |
| echo -n "#define CONFIG_INTEGRATOR" >> ${config_file} |
| echo " /* Integrator board */" >> ${config_file} |
| echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> ${config_file} |
| echo " 1 /* Integrator/CP */" >> ${config_file} |
| |
| cpu="arm_intcm" |
| variant="unknown core module" |
| |
| if [ "$2" = "" ] |
| then |
| echo "$0:: No parameters - using arm_intcm" |
| else |
| case "$2" in |
| ap966) |
| cpu="arm_intcm" |
| variant="unported core module CM966E-S" |
| ;; |
| |
| ap922_config) |
| cpu="arm_intcm" |
| variant="unported core module CM922T" |
| ;; |
| |
| integratorcp_config | \ |
| cp_config) |
| cpu="arm_intcm" |
| variant="unspecified core module" |
| ;; |
| |
| cp922_XA10_config) |
| cpu="arm_intcm" |
| variant="unported core module CM922T_XA10" |
| echo -n "#define CONFIG_CM922T_XA10" >> ${config_file} |
| echo " 1 /* CPU core is ARM922T_XA10 */" >> ${config_file} |
| ;; |
| |
| cp920t_config) |
| cpu="arm920t" |
| variant="Core module CM920T" |
| echo -n "#define CONFIG_CM920T" >> ${config_file} |
| echo " 1 /* CPU core is ARM920T */" >> ${config_file} |
| ;; |
| |
| cp926ejs_config) |
| cpu="arm926ejs" |
| variant="Core module CM926EJ-S" |
| echo -n "#define CONFIG_CM926EJ_S" >> ${config_file} |
| echo " 1 /* CPU core is ARM926EJ-S */ " >> ${config_file} |
| ;; |
| |
| |
| cp946es_config) |
| cpu="arm946es" |
| variant="Core module CM946E-S" |
| echo -n "#define CONFIG_CM946E_S" >> ${config_file} |
| echo " 1 /* CPU core is ARM946E-S */ " >> ${config_file} |
| ;; |
| |
| cp1136_config) |
| cpu="arm1136" |
| variant="Core module CM1136EJF-S" |
| echo -n "#define CONFIG_CM1136EJF_S" >> ${config_file} |
| echo " 1 /* CPU core is ARM1136JF-S */ " >> ${config_file} |
| ;; |
| |
| *) |
| echo "$0:: Unknown core module" |
| variant="unknown core module" |
| cpu="arm_intcm" |
| ;; |
| |
| esac |
| |
| fi |
| |
| if [ "$cpu" = "arm_intcm" ] |
| then |
| echo "/* Core module undefined/not ported */" >> ${config_file} |
| echo "#define CONFIG_ARM_INTCM 1" >> ${config_file} |
| echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> ${config_file} |
| echo -n " /* CM may not have " >> ${config_file} |
| echo "multiple SSRAM mapping */" >> ${config_file} |
| echo -n "#undef CONFIG_CM_SPD_DETECT " >> ${config_file} |
| echo -n " /* CM may not support SPD " >> ${config_file} |
| echo "query */" >> ${config_file} |
| echo -n "#undef CONFIG_CM_REMAP " >> ${config_file} |
| echo -n " /* CM may not support " >> ${config_file} |
| echo "remapping */" >> ${config_file} |
| echo -n "#undef CONFIG_CM_INIT " >> ${config_file} |
| echo -n " /* CM may not have " >> ${config_file} |
| echo "initialization reg */" >> ${config_file} |
| echo -n "#undef CONFIG_CM_TCRAM " >> ${config_file} |
| echo " /* CM may not have TCRAM */" >> ${config_file} |
| fi |
| |
| fi # ap |
| |
| # --------------------------------------------------------- |
| # Complete the configuration |
| # --------------------------------------------------------- |
| $MKCONFIG -a -n "${2%%_config}" integrator$1 arm $cpu integrator armltd |
| echo "Variant: $variant with core $cpu" |