include/configs/cerf250.h - uboot/mindspeed - Git at Google

 /*
  * (C) Copyright 2002
  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
  *
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Marius Groeger <mgroeger@sysgo.de>
  *
  * Configuation settings for the CERF250 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */
 #define CONFIG_PXA250		1	/* This is an PXA250 CPU    */
 #define CONFIG_CERF250		1	/* on Cerf PXA Board	    */
 #define BOARD_LATE_INIT		1
 #define CONFIG_BAUDRATE		38400

 #undef 	CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */

 /*
  * Size of malloc() pool
  */
 #define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

 /*
  * Hardware drivers
  */
 #define CONFIG_DRIVER_SMC91111
 #define CONFIG_SMC91111_BASE 0x04000300
 #define CONFIG_SMC_USE_32_BIT

 /*
  * select serial console configuration
  */
 #define CONFIG_FFUART	     1	/* we use FFUART on CERF PXA */

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_COMMANDS		(CONFIG_CMD_DFL)

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 #define CONFIG_BOOTDELAY	3
 #define CONFIG_ETHADDR		00:D0:CA:F1:3C:D2
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_IPADDR		192.168.0.5
 #define CONFIG_SERVERIP		192.168.0.2
 #define CONFIG_BOOTCOMMAND	"bootm 0xC0000"
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
 #define CONFIG_CMDLINE_TAG

 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif

 /*
  * Miscellaneous configurable options
  */
 #define CFG_HUSH_PARSER		1
 #define CFG_PROMPT_HUSH_PS2	"> "

 #define CFG_LONGHELP					/* undef to save memory		*/
 #ifdef CFG_HUSH_PARSER
 #define CFG_PROMPT			"uboot$ "	/* Monitor Command Prompt */
 #else
 #define CFG_PROMPT			"=> "		/* Monitor Command Prompt */
 #endif
 #define CFG_CBSIZE			256			/* Console I/O Buffer Size	*/
 #define CFG_PBSIZE 			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
 										/* Print Buffer Size */
 #define CFG_MAXARGS			16			/* max number of command args	*/
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CFG_DEVICE_NULLDEV	1

 #define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/

 #undef	CFG_CLKS_IN_HZ

 #define CFG_LOAD_ADDR		0xa2000000	/* default load address */

 #define CFG_HZ				3686400		/* incrementer freq: 3.6864 MHz */
 #define CFG_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */

 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }


 /*
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
 #ifdef CONFIG_USE_IRQ
 #define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
 #define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
 #endif

 /*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	4	   		/* we have 2 banks of DRAM */
 #define PHYS_SDRAM_1			0xa0000000 	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE		0x04000000 	/* 64 MB */
 #define PHYS_SDRAM_2			0xa4000000 	/* SDRAM Bank #2 */
 #define PHYS_SDRAM_2_SIZE		0x00000000 	/* 0 MB */
 #define PHYS_SDRAM_3			0xa8000000 	/* SDRAM Bank #3 */
 #define PHYS_SDRAM_3_SIZE		0x00000000 	/* 0 MB */
 #define PHYS_SDRAM_4			0xac000000 	/* SDRAM Bank #4 */
 #define PHYS_SDRAM_4_SIZE		0x00000000 	/* 0 MB */

 #define PHYS_FLASH_1			0x00000000 	/* Flash Bank #1 */
 #define PHYS_FLASH_2			0x04000000 	/* Flash Bank #2 */
 #define PHYS_FLASH_SIZE			0x02000000 	/* 32 MB */
 #define PHYS_FLASH_BANK_SIZE		0x02000000 	/* 32 MB Banks */
 #define PHYS_FLASH_SECT_SIZE		0x00040000 	/* 256 KB sectors (x2) */

 #define CFG_DRAM_BASE			0xa0000000
 #define CFG_DRAM_SIZE			0x04000000

 #define CFG_FLASH_BASE			PHYS_FLASH_1

 /*
  * GPIO settings
  */


 #define CFG_GPSR0_VAL		0x00408030
 #define CFG_GPSR1_VAL		0x00BFA882
 #define CFG_GPSR2_VAL		0x0001C000
 #define CFG_GPCR0_VAL		0xC0031100
 #define CFG_GPCR1_VAL		0xFC400300
 #define CFG_GPCR2_VAL		0x00003FFF
 #define CFG_GPDR0_VAL		0xC0439330
 #define CFG_GPDR1_VAL		0xFCFFAB82
 #define CFG_GPDR2_VAL		0x0001FFFF
 #define CFG_GAFR0_L_VAL		0x80000000
 #define CFG_GAFR0_U_VAL		0xA5000010
 #define CFG_GAFR1_L_VAL		0x60008018
 #define CFG_GAFR1_U_VAL		0xAAA5AAAA
 #define CFG_GAFR2_L_VAL		0xAAA0000A
 #define CFG_GAFR2_U_VAL		0x00000002

 #define CFG_PSSR_VAL		0x20

 /*
  * Memory settings
  */
 #define CFG_MSC0_VAL		0x12447FF0
 #define CFG_MSC1_VAL		0x12BC5554
 #define CFG_MSC2_VAL		0x7FF97FF1
 #define CFG_MDCNFG_VAL		0x00001AC9
 #define CFG_MDREFR_VAL		0x03CDC017
 #define CFG_MDMRS_VAL		0x00000000

 /*
  * PCMCIA and CF Interfaces
  */
 #define CFG_MECR_VAL		0x00000000
 #define CFG_MCMEM0_VAL		0x00010504
 #define CFG_MCMEM1_VAL		0x00010504
 #define CFG_MCATT0_VAL		0x00010504
 #define CFG_MCATT1_VAL		0x00010504
 #define CFG_MCIO0_VAL		0x00004715
 #define CFG_MCIO1_VAL		0x00004715

 #define _LED			0x08000010	/*check this */
 #define LED_BLANK		0x08000040
 #define LED_GPIO		0x10

 /*
  * FLASH and environment organization
  */
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CFG_MAX_FLASH_SECT	128  	/* max number of sectors on one chip    */

 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */

 #define CFG_MONITOR_LEN		0x40000		/* 256 KiB */
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN)
 #define CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/


 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2002
	* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
	*
	* (C) Copyright 2002
	* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
	* Marius Groeger <mgroeger@sysgo.de>
	*
	* Configuation settings for the CERF250 board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
	#define CONFIG_CERF250 1 /* on Cerf PXA Board */
	#define BOARD_LATE_INIT 1
	#define CONFIG_BAUDRATE 38400

	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

	/*
	* Size of malloc() pool
	*/
	#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

	/*
	* Hardware drivers
	*/
	#define CONFIG_DRIVER_SMC91111
	#define CONFIG_SMC91111_BASE 0x04000300
	#define CONFIG_SMC_USE_32_BIT

	/*
	* select serial console configuration
	*/
	#define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_COMMANDS (CONFIG_CMD_DFL)

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	#define CONFIG_BOOTDELAY 3
	#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2
	#define CONFIG_NETMASK 255.255.255.0
	#define CONFIG_IPADDR 192.168.0.5
	#define CONFIG_SERVERIP 192.168.0.2
	#define CONFIG_BOOTCOMMAND "bootm 0xC0000"
	#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
	#define CONFIG_CMDLINE_TAG

	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	#endif

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_HUSH_PARSER 1
	#define CFG_PROMPT_HUSH_PS2 "> "

	#define CFG_LONGHELP /* undef to save memory */
	#ifdef CFG_HUSH_PARSER
	#define CFG_PROMPT "uboot$ " /* Monitor Command Prompt */
	#else
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#endif
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
	/* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	#define CFG_DEVICE_NULLDEV 1

	#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
	#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */

	#undef CFG_CLKS_IN_HZ

	#define CFG_LOAD_ADDR 0xa2000000 /* default load address */

	#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
	#define CFG_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */

	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }


	/*
	* Stack sizes
	*
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (1281024) / regular stack */
	#ifdef CONFIG_USE_IRQ
	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	#endif

	/*
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
	#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
	#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
	#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
	#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
	#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
	#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
	#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
	#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */

	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
	#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
	#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
	#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */

	#define CFG_DRAM_BASE 0xa0000000
	#define CFG_DRAM_SIZE 0x04000000

	#define CFG_FLASH_BASE PHYS_FLASH_1

	/*
	* GPIO settings
	*/


	#define CFG_GPSR0_VAL 0x00408030
	#define CFG_GPSR1_VAL 0x00BFA882
	#define CFG_GPSR2_VAL 0x0001C000
	#define CFG_GPCR0_VAL 0xC0031100
	#define CFG_GPCR1_VAL 0xFC400300
	#define CFG_GPCR2_VAL 0x00003FFF
	#define CFG_GPDR0_VAL 0xC0439330
	#define CFG_GPDR1_VAL 0xFCFFAB82
	#define CFG_GPDR2_VAL 0x0001FFFF
	#define CFG_GAFR0_L_VAL 0x80000000
	#define CFG_GAFR0_U_VAL 0xA5000010
	#define CFG_GAFR1_L_VAL 0x60008018
	#define CFG_GAFR1_U_VAL 0xAAA5AAAA
	#define CFG_GAFR2_L_VAL 0xAAA0000A
	#define CFG_GAFR2_U_VAL 0x00000002

	#define CFG_PSSR_VAL 0x20

	/*
	* Memory settings
	*/
	#define CFG_MSC0_VAL 0x12447FF0
	#define CFG_MSC1_VAL 0x12BC5554
	#define CFG_MSC2_VAL 0x7FF97FF1
	#define CFG_MDCNFG_VAL 0x00001AC9
	#define CFG_MDREFR_VAL 0x03CDC017
	#define CFG_MDMRS_VAL 0x00000000

	/*
	* PCMCIA and CF Interfaces
	*/
	#define CFG_MECR_VAL 0x00000000
	#define CFG_MCMEM0_VAL 0x00010504
	#define CFG_MCMEM1_VAL 0x00010504
	#define CFG_MCATT0_VAL 0x00010504
	#define CFG_MCATT1_VAL 0x00010504
	#define CFG_MCIO0_VAL 0x00004715
	#define CFG_MCIO1_VAL 0x00004715

	#define _LED 0x08000010 /check this /
	#define LED_BLANK 0x08000040
	#define LED_GPIO 0x10

	/*
	* FLASH and environment organization
	*/
	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */

	/* timeout values are in ticks */
	#define CFG_FLASH_ERASE_TOUT (25CFG_HZ) / Timeout for Flash Erase */
	#define CFG_FLASH_WRITE_TOUT (25CFG_HZ) / Timeout for Flash Write */

	#define CFG_MONITOR_LEN 0x40000 /* 256 KiB */
	#define CFG_ENV_IS_IN_FLASH 1
	#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN)
	#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */


	#endif /* __CONFIG_H */