drivers/s3c4510b_eth.c - uboot/mindspeed - Git at Google

 /***********************************************************************
  *
  * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
  * Curt Brune <curt@cucy.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
  * Description:   Ethernet interface for Samsung S3C4510B SoC
  */

 #include <common.h>

 #ifdef CONFIG_DRIVER_S3C4510_ETH

 #include <command.h>
 #include <net.h>
 #include <asm/hardware.h>
 #include "s3c4510b_eth.h"

 static TX_FrameDescriptor    txFDbase[ETH_MaxTxFrames];
 static MACFrame           txFrameBase[ETH_MaxTxFrames];
 static RX_FrameDescriptor    rxFDbase[PKTBUFSRX];
 static ETH                      m_eth;

 static s32 TxFDinit( ETH *eth) {

 	s32 i;
 	MACFrame *txFrmBase;

 	/* disable cache for access to the TX buffers */
 	txFrmBase = (MACFrame *)( (u32)txFrameBase | CACHE_DISABLE_MASK);

 	/* store start of Tx descriptors and set current */
 	eth->m_curTX_FD  =  (TX_FrameDescriptor *) ((u32)txFDbase | CACHE_DISABLE_MASK);
 	eth->m_baseTX_FD = eth->m_curTX_FD;

 	for ( i = 0; i < ETH_MaxTxFrames; i++) {
 		eth->m_baseTX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)&txFrmBase[i];
 		eth->m_baseTX_FD[i].m_frameDataPtr.bf.owner   = 0x0; /* CPU owner */
 		eth->m_baseTX_FD[i].m_opt.ui                  = 0x0;
 		eth->m_baseTX_FD[i].m_status.ui               = 0x0;
 		eth->m_baseTX_FD[i].m_nextFD                  = &eth->m_baseTX_FD[i+1];
 	}

 	/* make the list circular */
 	eth->m_baseTX_FD[i-1].m_nextFD          = &eth->m_baseTX_FD[0];

 	PUT_REG( REG_BDMATXPTR, (u32)eth->m_curTX_FD);

 	return 0;
 }

 static s32 RxFDinit( ETH *eth) {

 	s32 i;
 	/*  MACFrame *rxFrmBase; */

 	/* disable cache for access to the RX buffers */
 	/*  rxFrmBase = (MACFrame *)( (u32)rxFrameBase | CACHE_DISABLE_MASK); */

 	/* store start of Rx descriptors and set current */
 	eth->m_curRX_FD = (RX_FrameDescriptor *)((u32)rxFDbase | CACHE_DISABLE_MASK);
 	eth->m_baseRX_FD = eth->m_curRX_FD;
 	for ( i = 0; i < PKTBUFSRX; i++) {
 		eth->m_baseRX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)NetRxPackets[i] | CACHE_DISABLE_MASK;
 		eth->m_baseRX_FD[i].m_frameDataPtr.bf.owner   = 0x1; /* BDMA owner */
 		eth->m_baseRX_FD[i].m_reserved                = 0x0;
 		eth->m_baseRX_FD[i].m_status.ui               = 0x0;
 		eth->m_baseRX_FD[i].m_nextFD                  = &eth->m_baseRX_FD[i+1];
 	}

 	/* make the list circular */
 	eth->m_baseRX_FD[i-1].m_nextFD                  = &eth->m_baseRX_FD[0];

 	PUT_REG( REG_BDMARXPTR, (u32)eth->m_curRX_FD);

 	return 0;
 }

 /*
  * Public u-boot interface functions below
  */

 int eth_init(bd_t *bis)
 {

 	ETH *eth = &m_eth;

 	/* store our MAC address */
 	eth->m_mac = bis->bi_enetaddr;

 	/* setup DBMA and MAC */
 	PUT_REG( REG_BDMARXCON, ETH_BRxRS);   /* reset BDMA RX machine */
 	PUT_REG( REG_BDMATXCON, ETH_BTxRS);   /* reset BDMA TX machine */
 	PUT_REG( REG_MACCON   , ETH_SwReset); /* reset MAC machine */
 	PUT_REG( REG_BDMARXLSZ, sizeof(MACFrame));
 	PUT_REG( REG_MACCON   , 0);           /* reset MAC machine */

 	/* init frame descriptors */
 	TxFDinit( eth);
 	RxFDinit( eth);

 	/* init the CAM with our MAC address */
 	PUT_REG( REG_CAM_BASE,       (eth->m_mac[0] << 24) |
 		(eth->m_mac[1] << 16) |
 		(eth->m_mac[2] <<  8) |
 		(eth->m_mac[3]));
 	PUT_REG( REG_CAM_BASE + 0x4, (eth->m_mac[4] << 24) |
 		(eth->m_mac[5] << 16));

 	/* enable CAM address 1 -- the MAC we just loaded */
 	PUT_REG( REG_CAMEN, 0x1);

 	PUT_REG( REG_CAMCON,
 		ETH_BroadAcc |	/* accept broadcast packetes */
 		ETH_CompEn); /* enable compare mode (check against the CAM) */

 	/* configure the BDMA Transmitter control */
 	PUT_REG( REG_BDMATXCON,
 		ETH_BTxBRST   |	/* BDMA Tx burst size 16 words  */
 		ETH_BTxMSL110 |	/* BDMA Tx wait to fill 6/8 of the BDMA */
 		ETH_BTxSTSKO  |	/* BDMA Tx interrupt(Stop) on non-owner TX FD */
 		ETH_BTxEn);	/* BDMA Tx Enable  */

 	/* configure the MAC Transmitter control */
 	PUT_REG( REG_MACTXCON,
 		ETH_EnComp | /* interrupt when the MAC transmits or discards packet */
 		ETH_TxEn);	/* MAC transmit enable */

 	/* configure the BDMA Receiver control */
 	PUT_REG( REG_BDMARXCON,
 		ETH_BRxBRST   |	/* BDMA Rx Burst Size 16 words */
 		ETH_BRxSTSKO  |	/* BDMA Rx interrupt(Stop) on non-owner RX FD */
 		ETH_BRxMAINC  |	/* BDMA Rx Memory Address increment */
 		ETH_BRxDIE    |	/* BDMA Rx Every Received Frame Interrupt Enable */
 		ETH_BRxNLIE   |	/* BDMA Rx NULL List Interrupt Enable */
 		ETH_BRxNOIE   |	/* BDMA Rx Not Owner Interrupt Enable */
 		ETH_BRxLittle |	/* BDMA Rx Little endian */
 		ETH_BRxEn);	/* BDMA Rx Enable */

 	/* configure the MAC Receiver control */
 	PUT_REG( REG_MACRXCON,
 		ETH_RxEn);	/* MAC ETH_RxEn */

 	return 0;

 }

 /* Send a packet	*/
 s32 eth_send(volatile void *packet, s32 length)
 {

 	u32 i;
 	ETH *eth = &m_eth;

 	if ( eth->m_curTX_FD->m_frameDataPtr.bf.owner) {
 		printf("eth_send(): TX Frame.  CPU not owner.\n");
 		return -1;
 	}

 	/* copy user data into frame data pointer */
 	memcpy((void *)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr),
 	       (void *)packet,
 	       length);

 	/* Set TX Frame flags */
 	eth->m_curTX_FD->m_opt.bf.widgetAlign  = 0;
 	eth->m_curTX_FD->m_opt.bf.frameDataDir = 1;
 	eth->m_curTX_FD->m_opt.bf.littleEndian = 1;
 	eth->m_curTX_FD->m_opt.bf.macTxIrqEnbl = 1;
 	eth->m_curTX_FD->m_opt.bf.no_crc       = 0;
 	eth->m_curTX_FD->m_opt.bf.no_padding   = 0;

 	/* Set TX Frame length */
 	eth->m_curTX_FD->m_status.bf.len       = length;

 	/* Change ownership to BDMA */
 	eth->m_curTX_FD->m_frameDataPtr.bf.owner = 1;

 	/* Enable MAC and BDMA Tx control register */
 	SET_REG( REG_BDMATXCON, ETH_BTxEn);
 	SET_REG( REG_MACTXCON,  ETH_TxEn);

 	/* poll on TX completion status */
 	while ( !eth->m_curTX_FD->m_status.bf.complete) {
 		/* sleep  */
 		for ( i = 0; i < 0x10000; i ++);
 	}

 	/* Change the Tx frame descriptor for next use */
 	eth->m_curTX_FD = eth->m_curTX_FD->m_nextFD;

 	return 0;
 }

 /* Check for received packets	*/
 s32 eth_rx (void)
 {
 	s32 nLen = 0;
 	ETH *eth = &m_eth;

 	/* check if packet ready */
 	if ( (GET_REG( REG_BDMASTAT)) & ETH_S_BRxRDF) {
 		/* process all waiting packets */
 		while ( !eth->m_curRX_FD->m_frameDataPtr.bf.owner) {
 			nLen = eth->m_curRX_FD->m_status.bf.len;
 			/* call back u-boot -- may call eth_send() */
 			NetReceive ((u8 *)eth->m_curRX_FD->m_frameDataPtr.ui, nLen);
 			/* set owner back to CPU */
 			eth->m_curRX_FD->m_frameDataPtr.bf.owner = 1;
 			/* clear status */
 			eth->m_curRX_FD->m_status.ui = 0x0;
 			/* advance to next descriptor */
 			eth->m_curRX_FD = eth->m_curRX_FD->m_nextFD;
 			/* clear received frame bit */
 			PUT_REG( REG_BDMASTAT, ETH_S_BRxRDF);
 		}
 	}

 	return nLen;
 }

 /* Halt ethernet engine */
 void eth_halt(void)
 {
 	/* disable MAC */
 	PUT_REG( REG_MACCON, ETH_HaltReg);
 }

 #endif
	/***********************************************************************
	*
	* Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
	* Curt Brune <curt@cucy.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*
	* Description: Ethernet interface for Samsung S3C4510B SoC
	*/

	#include <common.h>

	#ifdef CONFIG_DRIVER_S3C4510_ETH

	#include <command.h>
	#include <net.h>
	#include <asm/hardware.h>
	#include "s3c4510b_eth.h"

	static TX_FrameDescriptor txFDbase[ETH_MaxTxFrames];
	static MACFrame txFrameBase[ETH_MaxTxFrames];
	static RX_FrameDescriptor rxFDbase[PKTBUFSRX];
	static ETH m_eth;

	static s32 TxFDinit( ETH *eth) {

	s32 i;
	MACFrame *txFrmBase;

	/* disable cache for access to the TX buffers */
	txFrmBase = (MACFrame *)( (u32)txFrameBase \| CACHE_DISABLE_MASK);

	/* store start of Tx descriptors and set current */
	eth->m_curTX_FD = (TX_FrameDescriptor *) ((u32)txFDbase \| CACHE_DISABLE_MASK);
	eth->m_baseTX_FD = eth->m_curTX_FD;

	for ( i = 0; i < ETH_MaxTxFrames; i++) {
	eth->m_baseTX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)&txFrmBase[i];
	eth->m_baseTX_FD[i].m_frameDataPtr.bf.owner = 0x0; /* CPU owner */
	eth->m_baseTX_FD[i].m_opt.ui = 0x0;
	eth->m_baseTX_FD[i].m_status.ui = 0x0;
	eth->m_baseTX_FD[i].m_nextFD = &eth->m_baseTX_FD[i+1];
	}

	/* make the list circular */
	eth->m_baseTX_FD[i-1].m_nextFD = &eth->m_baseTX_FD[0];

	PUT_REG( REG_BDMATXPTR, (u32)eth->m_curTX_FD);

	return 0;
	}

	static s32 RxFDinit( ETH *eth) {

	s32 i;
	/* MACFrame rxFrmBase; /

	/* disable cache for access to the RX buffers */
	/* rxFrmBase = (MACFrame )( (u32)rxFrameBase \| CACHE_DISABLE_MASK); /

	/* store start of Rx descriptors and set current */
	eth->m_curRX_FD = (RX_FrameDescriptor *)((u32)rxFDbase \| CACHE_DISABLE_MASK);
	eth->m_baseRX_FD = eth->m_curRX_FD;
	for ( i = 0; i < PKTBUFSRX; i++) {
	eth->m_baseRX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)NetRxPackets[i] \| CACHE_DISABLE_MASK;
	eth->m_baseRX_FD[i].m_frameDataPtr.bf.owner = 0x1; /* BDMA owner */
	eth->m_baseRX_FD[i].m_reserved = 0x0;
	eth->m_baseRX_FD[i].m_status.ui = 0x0;
	eth->m_baseRX_FD[i].m_nextFD = &eth->m_baseRX_FD[i+1];
	}

	/* make the list circular */
	eth->m_baseRX_FD[i-1].m_nextFD = &eth->m_baseRX_FD[0];

	PUT_REG( REG_BDMARXPTR, (u32)eth->m_curRX_FD);

	return 0;
	}

	/*
	* Public u-boot interface functions below
	*/

	int eth_init(bd_t *bis)
	{

	ETH *eth = &m_eth;

	/* store our MAC address */
	eth->m_mac = bis->bi_enetaddr;

	/* setup DBMA and MAC */
	PUT_REG( REG_BDMARXCON, ETH_BRxRS); /* reset BDMA RX machine */
	PUT_REG( REG_BDMATXCON, ETH_BTxRS); /* reset BDMA TX machine */
	PUT_REG( REG_MACCON , ETH_SwReset); /* reset MAC machine */
	PUT_REG( REG_BDMARXLSZ, sizeof(MACFrame));
	PUT_REG( REG_MACCON , 0); /* reset MAC machine */

	/* init frame descriptors */
	TxFDinit( eth);
	RxFDinit( eth);

	/* init the CAM with our MAC address */
	PUT_REG( REG_CAM_BASE, (eth->m_mac[0] << 24) \|
	(eth->m_mac[1] << 16) \|
	(eth->m_mac[2] << 8) \|
	(eth->m_mac[3]));
	PUT_REG( REG_CAM_BASE + 0x4, (eth->m_mac[4] << 24) \|
	(eth->m_mac[5] << 16));

	/* enable CAM address 1 -- the MAC we just loaded */
	PUT_REG( REG_CAMEN, 0x1);

	PUT_REG( REG_CAMCON,
	ETH_BroadAcc \| /* accept broadcast packetes */
	ETH_CompEn); /* enable compare mode (check against the CAM) */

	/* configure the BDMA Transmitter control */
	PUT_REG( REG_BDMATXCON,
	ETH_BTxBRST \| /* BDMA Tx burst size 16 words */
	ETH_BTxMSL110 \| /* BDMA Tx wait to fill 6/8 of the BDMA */
	ETH_BTxSTSKO \| /* BDMA Tx interrupt(Stop) on non-owner TX FD */
	ETH_BTxEn); /* BDMA Tx Enable */

	/* configure the MAC Transmitter control */
	PUT_REG( REG_MACTXCON,
	ETH_EnComp \| /* interrupt when the MAC transmits or discards packet */
	ETH_TxEn); /* MAC transmit enable */

	/* configure the BDMA Receiver control */
	PUT_REG( REG_BDMARXCON,
	ETH_BRxBRST \| /* BDMA Rx Burst Size 16 words */
	ETH_BRxSTSKO \| /* BDMA Rx interrupt(Stop) on non-owner RX FD */
	ETH_BRxMAINC \| /* BDMA Rx Memory Address increment */
	ETH_BRxDIE \| /* BDMA Rx Every Received Frame Interrupt Enable */
	ETH_BRxNLIE \| /* BDMA Rx NULL List Interrupt Enable */
	ETH_BRxNOIE \| /* BDMA Rx Not Owner Interrupt Enable */
	ETH_BRxLittle \| /* BDMA Rx Little endian */
	ETH_BRxEn); /* BDMA Rx Enable */

	/* configure the MAC Receiver control */
	PUT_REG( REG_MACRXCON,
	ETH_RxEn); /* MAC ETH_RxEn */

	return 0;

	}

	/* Send a packet */
	s32 eth_send(volatile void *packet, s32 length)
	{

	u32 i;
	ETH *eth = &m_eth;

	if ( eth->m_curTX_FD->m_frameDataPtr.bf.owner) {
	printf("eth_send(): TX Frame. CPU not owner.\n");
	return -1;
	}

	/* copy user data into frame data pointer */
	memcpy((void *)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr),
	(void *)packet,
	length);

	/* Set TX Frame flags */
	eth->m_curTX_FD->m_opt.bf.widgetAlign = 0;
	eth->m_curTX_FD->m_opt.bf.frameDataDir = 1;
	eth->m_curTX_FD->m_opt.bf.littleEndian = 1;
	eth->m_curTX_FD->m_opt.bf.macTxIrqEnbl = 1;
	eth->m_curTX_FD->m_opt.bf.no_crc = 0;
	eth->m_curTX_FD->m_opt.bf.no_padding = 0;

	/* Set TX Frame length */
	eth->m_curTX_FD->m_status.bf.len = length;

	/* Change ownership to BDMA */
	eth->m_curTX_FD->m_frameDataPtr.bf.owner = 1;

	/* Enable MAC and BDMA Tx control register */
	SET_REG( REG_BDMATXCON, ETH_BTxEn);
	SET_REG( REG_MACTXCON, ETH_TxEn);

	/* poll on TX completion status */
	while ( !eth->m_curTX_FD->m_status.bf.complete) {
	/* sleep */
	for ( i = 0; i < 0x10000; i ++);
	}

	/* Change the Tx frame descriptor for next use */
	eth->m_curTX_FD = eth->m_curTX_FD->m_nextFD;

	return 0;
	}

	/* Check for received packets */
	s32 eth_rx (void)
	{
	s32 nLen = 0;
	ETH *eth = &m_eth;

	/* check if packet ready */
	if ( (GET_REG( REG_BDMASTAT)) & ETH_S_BRxRDF) {
	/* process all waiting packets */
	while ( !eth->m_curRX_FD->m_frameDataPtr.bf.owner) {
	nLen = eth->m_curRX_FD->m_status.bf.len;
	/* call back u-boot -- may call eth_send() */
	NetReceive ((u8 *)eth->m_curRX_FD->m_frameDataPtr.ui, nLen);
	/* set owner back to CPU */
	eth->m_curRX_FD->m_frameDataPtr.bf.owner = 1;
	/* clear status */
	eth->m_curRX_FD->m_status.ui = 0x0;
	/* advance to next descriptor */
	eth->m_curRX_FD = eth->m_curRX_FD->m_nextFD;
	/* clear received frame bit */
	PUT_REG( REG_BDMASTAT, ETH_S_BRxRDF);
	}
	}

	return nLen;
	}

	/* Halt ethernet engine */
	void eth_halt(void)
	{
	/* disable MAC */
	PUT_REG( REG_MACCON, ETH_HaltReg);
	}

	#endif