drivers/cs8900.c - uboot/mindspeed - Git at Google

 /*
  * Cirrus Logic CS8900A Ethernet
  *
  * (C) 2003 Wolfgang Denk, wd@denx.de
  *     Extension to synchronize ethaddr environment variable
  *     against value in EEPROM
  *
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Marius Groeger <mgroeger@sysgo.de>
  *
  * Copyright (C) 1999 Ben Williamson <benw@pobox.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is loaded into SRAM in bootstrap mode, where it waits
  * for commands on UART1 to read and write memory, jump to code etc.
  * A design goal for this program is to be entirely independent of the
  * target board.  Anything with a CL-PS7111 or EP7211 should be able to run
  * this code in bootstrap mode.  All the board specifics can be handled on
  * the host.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include <common.h>
 #include <command.h>
 #include "cs8900.h"
 #include <net.h>

 #ifdef CONFIG_DRIVER_CS8900

 #if (CONFIG_COMMANDS & CFG_CMD_NET)

 #undef DEBUG

 /* packet page register access functions */

 #ifdef CS8900_BUS32
 /* we don't need 16 bit initialisation on 32 bit bus */
 #define get_reg_init_bus(x) get_reg((x))
 #else
 static unsigned short get_reg_init_bus (int regno)
 {
 	/* force 16 bit busmode */
 	volatile unsigned char c;

 	c = CS8900_BUS16_0;
 	c = CS8900_BUS16_1;
 	c = CS8900_BUS16_0;
 	c = CS8900_BUS16_1;
 	c = CS8900_BUS16_0;

 	CS8900_PPTR = regno;
 	return (unsigned short) CS8900_PDATA;
 }
 #endif

 static unsigned short get_reg (int regno)
 {
 	CS8900_PPTR = regno;
 	return (unsigned short) CS8900_PDATA;
 }


 static void put_reg (int regno, unsigned short val)
 {
 	CS8900_PPTR = regno;
 	CS8900_PDATA = val;
 }

 static void eth_reset (void)
 {
 	int tmo;
 	unsigned short us;

 	/* reset NIC */
 	put_reg (PP_SelfCTL, get_reg (PP_SelfCTL) | PP_SelfCTL_Reset);

 	/* wait for 200ms */
 	udelay (200000);
 	/* Wait until the chip is reset */

 	tmo = get_timer (0) + 1 * CFG_HZ;
 	while ((((us = get_reg_init_bus (PP_SelfSTAT)) & PP_SelfSTAT_InitD) == 0)
 		   && tmo < get_timer (0))
 		/*NOP*/;
 }

 static void eth_reginit (void)
 {
 	/* receive only error free packets addressed to this card */
 	put_reg (PP_RxCTL, PP_RxCTL_IA | PP_RxCTL_Broadcast | PP_RxCTL_RxOK);
 	/* do not generate any interrupts on receive operations */
 	put_reg (PP_RxCFG, 0);
 	/* do not generate any interrupts on transmit operations */
 	put_reg (PP_TxCFG, 0);
 	/* do not generate any interrupts on buffer operations */
 	put_reg (PP_BufCFG, 0);
 	/* enable transmitter/receiver mode */
 	put_reg (PP_LineCTL, PP_LineCTL_Rx | PP_LineCTL_Tx);
 }

 void cs8900_get_enetaddr (uchar * addr)
 {
 	int i;
 	unsigned char env_enetaddr[6];
 	char *tmp = getenv ("ethaddr");
 	char *end;

 	for (i=0; i<6; i++) {
 		env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
 		if (tmp)
 			tmp = (*end) ? end+1 : end;
 	}

 	/* verify chip id */
 	if (get_reg_init_bus (PP_ChipID) != 0x630e)
 		return;
 	eth_reset ();
 	if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) ==
 			(PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) {

 		/* Load the MAC from EEPROM */
 		for (i = 0; i < 6 / 2; i++) {
 			unsigned int Addr;

 			Addr = get_reg (PP_IA + i * 2);
 			addr[i * 2] = Addr & 0xFF;
 			addr[i * 2 + 1] = Addr >> 8;
 		}

 		if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
 		    memcmp(env_enetaddr, addr, 6) != 0) {
 			printf ("\nWarning: MAC addresses don't match:\n");
 			printf ("\tHW MAC address:  "
 				"%02X:%02X:%02X:%02X:%02X:%02X\n",
 				addr[0], addr[1],
 				addr[2], addr[3],
 				addr[4], addr[5] );
 			printf ("\t\"ethaddr\" value: "
 				"%02X:%02X:%02X:%02X:%02X:%02X\n",
 				env_enetaddr[0], env_enetaddr[1],
 				env_enetaddr[2], env_enetaddr[3],
 				env_enetaddr[4], env_enetaddr[5]) ;
 			debug ("### Set MAC addr from environment\n");
 			memcpy (addr, env_enetaddr, 6);
 		}
 		if (!tmp) {
 			char ethaddr[20];
 			sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
 				 addr[0], addr[1],
 				 addr[2], addr[3],
 				 addr[4], addr[5]) ;
 			debug ("### Set environment from HW MAC addr = \"%s\"\n",				ethaddr);
 			setenv ("ethaddr", ethaddr);
 		}

 	}
 }

 void eth_halt (void)
 {
 	/* disable transmitter/receiver mode */
 	put_reg (PP_LineCTL, 0);

 	/* "shutdown" to show ChipID or kernel wouldn't find he cs8900 ... */
 	get_reg_init_bus (PP_ChipID);
 }

 int eth_init (bd_t * bd)
 {

 	/* verify chip id */
 	if (get_reg_init_bus (PP_ChipID) != 0x630e) {
 		printf ("CS8900 Ethernet chip not found?!\n");
 		return 0;
 	}

 	eth_reset ();
 	/* set the ethernet address */
 	put_reg (PP_IA + 0, bd->bi_enetaddr[0] | (bd->bi_enetaddr[1] << 8));
 	put_reg (PP_IA + 2, bd->bi_enetaddr[2] | (bd->bi_enetaddr[3] << 8));
 	put_reg (PP_IA + 4, bd->bi_enetaddr[4] | (bd->bi_enetaddr[5] << 8));

 	eth_reginit ();
 	return 0;
 }

 /* Get a data block via Ethernet */
 extern int eth_rx (void)
 {
 	int i;
 	unsigned short rxlen;
 	unsigned short *addr;
 	unsigned short status;

 	status = get_reg (PP_RER);

 	if ((status & PP_RER_RxOK) == 0)
 		return 0;

 	status = CS8900_RTDATA;		/* stat */
 	rxlen = CS8900_RTDATA;		/* len */

 #ifdef DEBUG
 	if (rxlen > PKTSIZE_ALIGN + PKTALIGN)
 		printf ("packet too big!\n");
 #endif
 	for (addr = (unsigned short *) NetRxPackets[0], i = rxlen >> 1; i > 0;
 		 i--)
 		*addr++ = CS8900_RTDATA;
 	if (rxlen & 1)
 		*addr++ = CS8900_RTDATA;

 	/* Pass the packet up to the protocol layers. */
 	NetReceive (NetRxPackets[0], rxlen);

 	return rxlen;
 }

 /* Send a data block via Ethernet. */
 extern int eth_send (volatile void *packet, int length)
 {
 	volatile unsigned short *addr;
 	int tmo;
 	unsigned short s;

 retry:
 	/* initiate a transmit sequence */
 	CS8900_TxCMD = PP_TxCmd_TxStart_Full;
 	CS8900_TxLEN = length;

 	/* Test to see if the chip has allocated memory for the packet */
 	if ((get_reg (PP_BusSTAT) & PP_BusSTAT_TxRDY) == 0) {
 		/* Oops... this should not happen! */
 #ifdef DEBUG
 		printf ("cs: unable to send packet; retrying...\n");
 #endif
 		for (tmo = get_timer (0) + 5 * CFG_HZ; get_timer (0) < tmo;)
 			/*NOP*/;
 		eth_reset ();
 		eth_reginit ();
 		goto retry;
 	}

 	/* Write the contents of the packet */
 	/* assume even number of bytes */
 	for (addr = packet; length > 0; length -= 2)
 		CS8900_RTDATA = *addr++;

 	/* wait for transfer to succeed */
 	tmo = get_timer (0) + 5 * CFG_HZ;
 	while ((s = get_reg (PP_TER) & ~0x1F) == 0) {
 		if (get_timer (0) >= tmo)
 			break;
 	}

 	/* nothing */ ;
 	if ((s & (PP_TER_CRS | PP_TER_TxOK)) != PP_TER_TxOK) {
 #ifdef DEBUG
 		printf ("\ntransmission error %#x\n", s);
 #endif
 	}

 	return 0;
 }

 static void cs8900_e2prom_ready(void)
 {
 	while(get_reg(PP_SelfST) & SI_BUSY);
 }

 /***********************************************************/
 /* read a 16-bit word out of the EEPROM                    */
 /***********************************************************/

 int cs8900_e2prom_read(unsigned char addr, unsigned short *value)
 {
 	cs8900_e2prom_ready();
 	put_reg(PP_EECMD, EEPROM_READ_CMD | addr);
 	cs8900_e2prom_ready();
 	*value = get_reg(PP_EEData);

 	return 0;
 }


 /***********************************************************/
 /* write a 16-bit word into the EEPROM                     */
 /***********************************************************/

 int cs8900_e2prom_write(unsigned char addr, unsigned short value)
 {
 	cs8900_e2prom_ready();
 	put_reg(PP_EECMD, EEPROM_WRITE_EN);
 	cs8900_e2prom_ready();
 	put_reg(PP_EEData, value);
 	put_reg(PP_EECMD, EEPROM_WRITE_CMD | addr);
 	cs8900_e2prom_ready();
 	put_reg(PP_EECMD, EEPROM_WRITE_DIS);
 	cs8900_e2prom_ready();

 	return 0;
 }

 #endif	/* COMMANDS & CFG_NET */

 #endif	/* CONFIG_DRIVER_CS8900 */
	/*
	* Cirrus Logic CS8900A Ethernet
	*
	* (C) 2003 Wolfgang Denk, wd@denx.de
	* Extension to synchronize ethaddr environment variable
	* against value in EEPROM
	*
	* (C) Copyright 2002
	* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
	* Marius Groeger <mgroeger@sysgo.de>
	*
	* Copyright (C) 1999 Ben Williamson <benw@pobox.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is loaded into SRAM in bootstrap mode, where it waits
	* for commands on UART1 to read and write memory, jump to code etc.
	* A design goal for this program is to be entirely independent of the
	* target board. Anything with a CL-PS7111 or EP7211 should be able to run
	* this code in bootstrap mode. All the board specifics can be handled on
	* the host.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <common.h>
	#include <command.h>
	#include "cs8900.h"
	#include <net.h>

	#ifdef CONFIG_DRIVER_CS8900

	#if (CONFIG_COMMANDS & CFG_CMD_NET)

	#undef DEBUG

	/* packet page register access functions */

	#ifdef CS8900_BUS32
	/* we don't need 16 bit initialisation on 32 bit bus */
	#define get_reg_init_bus(x) get_reg((x))
	#else
	static unsigned short get_reg_init_bus (int regno)
	{
	/* force 16 bit busmode */
	volatile unsigned char c;

	c = CS8900_BUS16_0;
	c = CS8900_BUS16_1;
	c = CS8900_BUS16_0;
	c = CS8900_BUS16_1;
	c = CS8900_BUS16_0;

	CS8900_PPTR = regno;
	return (unsigned short) CS8900_PDATA;
	}
	#endif

	static unsigned short get_reg (int regno)
	{
	CS8900_PPTR = regno;
	return (unsigned short) CS8900_PDATA;
	}


	static void put_reg (int regno, unsigned short val)
	{
	CS8900_PPTR = regno;
	CS8900_PDATA = val;
	}

	static void eth_reset (void)
	{
	int tmo;
	unsigned short us;

	/* reset NIC */
	put_reg (PP_SelfCTL, get_reg (PP_SelfCTL) \| PP_SelfCTL_Reset);

	/* wait for 200ms */
	udelay (200000);
	/* Wait until the chip is reset */

	tmo = get_timer (0) + 1 * CFG_HZ;
	while ((((us = get_reg_init_bus (PP_SelfSTAT)) & PP_SelfSTAT_InitD) == 0)
	&& tmo < get_timer (0))
	/NOP/;
	}

	static void eth_reginit (void)
	{
	/* receive only error free packets addressed to this card */
	put_reg (PP_RxCTL, PP_RxCTL_IA \| PP_RxCTL_Broadcast \| PP_RxCTL_RxOK);
	/* do not generate any interrupts on receive operations */
	put_reg (PP_RxCFG, 0);
	/* do not generate any interrupts on transmit operations */
	put_reg (PP_TxCFG, 0);
	/* do not generate any interrupts on buffer operations */
	put_reg (PP_BufCFG, 0);
	/* enable transmitter/receiver mode */
	put_reg (PP_LineCTL, PP_LineCTL_Rx \| PP_LineCTL_Tx);
	}

	void cs8900_get_enetaddr (uchar * addr)
	{
	int i;
	unsigned char env_enetaddr[6];
	char *tmp = getenv ("ethaddr");
	char *end;

	for (i=0; i<6; i++) {
	env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
	if (tmp)
	tmp = (*end) ? end+1 : end;
	}

	/* verify chip id */
	if (get_reg_init_bus (PP_ChipID) != 0x630e)
	return;
	eth_reset ();
	if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM \| PP_SelfSTAT_EEPROM_OK)) ==
	(PP_SelfSTAT_EEPROM \| PP_SelfSTAT_EEPROM_OK)) {

	/* Load the MAC from EEPROM */
	for (i = 0; i < 6 / 2; i++) {
	unsigned int Addr;

	Addr = get_reg (PP_IA + i * 2);
	addr[i * 2] = Addr & 0xFF;
	addr[i * 2 + 1] = Addr >> 8;
	}

	if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
	memcmp(env_enetaddr, addr, 6) != 0) {
	printf ("\nWarning: MAC addresses don't match:\n");
	printf ("\tHW MAC address: "
	"%02X:%02X:%02X:%02X:%02X:%02X\n",
	addr[0], addr[1],
	addr[2], addr[3],
	addr[4], addr[5] );
	printf ("\t\"ethaddr\" value: "
	"%02X:%02X:%02X:%02X:%02X:%02X\n",
	env_enetaddr[0], env_enetaddr[1],
	env_enetaddr[2], env_enetaddr[3],
	env_enetaddr[4], env_enetaddr[5]) ;
	debug ("### Set MAC addr from environment\n");
	memcpy (addr, env_enetaddr, 6);
	}
	if (!tmp) {
	char ethaddr[20];
	sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
	addr[0], addr[1],
	addr[2], addr[3],
	addr[4], addr[5]) ;
	debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
	setenv ("ethaddr", ethaddr);
	}

	}
	}

	void eth_halt (void)
	{
	/* disable transmitter/receiver mode */
	put_reg (PP_LineCTL, 0);

	/* "shutdown" to show ChipID or kernel wouldn't find he cs8900 ... */
	get_reg_init_bus (PP_ChipID);
	}

	int eth_init (bd_t * bd)
	{

	/* verify chip id */
	if (get_reg_init_bus (PP_ChipID) != 0x630e) {
	printf ("CS8900 Ethernet chip not found?!\n");
	return 0;
	}

	eth_reset ();
	/* set the ethernet address */
	put_reg (PP_IA + 0, bd->bi_enetaddr[0] \| (bd->bi_enetaddr[1] << 8));
	put_reg (PP_IA + 2, bd->bi_enetaddr[2] \| (bd->bi_enetaddr[3] << 8));
	put_reg (PP_IA + 4, bd->bi_enetaddr[4] \| (bd->bi_enetaddr[5] << 8));

	eth_reginit ();
	return 0;
	}

	/* Get a data block via Ethernet */
	extern int eth_rx (void)
	{
	int i;
	unsigned short rxlen;
	unsigned short *addr;
	unsigned short status;

	status = get_reg (PP_RER);

	if ((status & PP_RER_RxOK) == 0)
	return 0;

	status = CS8900_RTDATA; /* stat */
	rxlen = CS8900_RTDATA; /* len */

	#ifdef DEBUG
	if (rxlen > PKTSIZE_ALIGN + PKTALIGN)
	printf ("packet too big!\n");
	#endif
	for (addr = (unsigned short *) NetRxPackets[0], i = rxlen >> 1; i > 0;
	i--)
	*addr++ = CS8900_RTDATA;
	if (rxlen & 1)
	*addr++ = CS8900_RTDATA;

	/* Pass the packet up to the protocol layers. */
	NetReceive (NetRxPackets[0], rxlen);

	return rxlen;
	}

	/* Send a data block via Ethernet. */
	extern int eth_send (volatile void *packet, int length)
	{
	volatile unsigned short *addr;
	int tmo;
	unsigned short s;

	retry:
	/* initiate a transmit sequence */
	CS8900_TxCMD = PP_TxCmd_TxStart_Full;
	CS8900_TxLEN = length;

	/* Test to see if the chip has allocated memory for the packet */
	if ((get_reg (PP_BusSTAT) & PP_BusSTAT_TxRDY) == 0) {
	/* Oops... this should not happen! */
	#ifdef DEBUG
	printf ("cs: unable to send packet; retrying...\n");
	#endif
	for (tmo = get_timer (0) + 5 * CFG_HZ; get_timer (0) < tmo;)
	/NOP/;
	eth_reset ();
	eth_reginit ();
	goto retry;
	}

	/* Write the contents of the packet */
	/* assume even number of bytes */
	for (addr = packet; length > 0; length -= 2)
	CS8900_RTDATA = *addr++;

	/* wait for transfer to succeed */
	tmo = get_timer (0) + 5 * CFG_HZ;
	while ((s = get_reg (PP_TER) & ~0x1F) == 0) {
	if (get_timer (0) >= tmo)
	break;
	}

	/* nothing */ ;
	if ((s & (PP_TER_CRS \| PP_TER_TxOK)) != PP_TER_TxOK) {
	#ifdef DEBUG
	printf ("\ntransmission error %#x\n", s);
	#endif
	}

	return 0;
	}

	static void cs8900_e2prom_ready(void)
	{
	while(get_reg(PP_SelfST) & SI_BUSY);
	}

	/***********************************************************/
	/* read a 16-bit word out of the EEPROM */
	/***********************************************************/

	int cs8900_e2prom_read(unsigned char addr, unsigned short *value)
	{
	cs8900_e2prom_ready();
	put_reg(PP_EECMD, EEPROM_READ_CMD \| addr);
	cs8900_e2prom_ready();
	*value = get_reg(PP_EEData);

	return 0;
	}


	/***********************************************************/
	/* write a 16-bit word into the EEPROM */
	/***********************************************************/

	int cs8900_e2prom_write(unsigned char addr, unsigned short value)
	{
	cs8900_e2prom_ready();
	put_reg(PP_EECMD, EEPROM_WRITE_EN);
	cs8900_e2prom_ready();
	put_reg(PP_EEData, value);
	put_reg(PP_EECMD, EEPROM_WRITE_CMD \| addr);
	cs8900_e2prom_ready();
	put_reg(PP_EECMD, EEPROM_WRITE_DIS);
	cs8900_e2prom_ready();

	return 0;
	}

	#endif /* COMMANDS & CFG_NET */

	#endif /* CONFIG_DRIVER_CS8900 */