blob: ba76bef12e4be5ff525a9d9f5f4395893c407d6a [file] [log] [blame]
/*
* (C) Copyright 2005
* BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
*
* Based On
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include "cfm_flash.h"
#define PHYS_FLASH_1 CFG_FLASH_BASE
#define FLASH_BANK_SIZE 0x200000
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
void flash_print_info (flash_info_t * info)
{
int i;
switch (info->flash_id & FLASH_VENDMASK) {
case (AMD_MANUFACT & FLASH_VENDMASK):
printf ("AMD: ");
switch (info->flash_id & FLASH_TYPEMASK) {
case (AMD_ID_LV160B & FLASH_TYPEMASK):
printf ("AM29LV160B (16Bit)\n");
break;
default:
printf ("Unknown Chip Type\n");
break;
}
break;
case FREESCALE_MANUFACT & FLASH_VENDMASK:
cfm_flash_print_info (info);
break;
default:
printf ("Unknown Vendor ");
break;
}
puts (" Size: ");
if ((info->size >> 20) > 0)
{
printf ("%ld MiB",info->size >> 20);
}
else
{
printf ("%ld KiB",info->size >> 10);
}
printf (" in %d Sectors\n", info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 4) == 0) {
printf ("\n ");
}
printf ("%02d: %08lX%s ", i,info->start[i],
info->protect[i] ? " P" : " ");
}
printf ("\n\n");
}
unsigned long flash_init (void)
{
int i, j;
ulong size = 0;
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
switch (i)
{
case 1:
flash_info[i].flash_id =
(AMD_MANUFACT & FLASH_VENDMASK) |
(AMD_ID_LV160B & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
flashbase = PHYS_FLASH_1;
for (j = 0; j < flash_info[i].sector_count; j++) {
if (j == 0) {
/* 1st is 16 KiB */
flash_info[i].start[j] = flashbase;
}
if ((j >= 1) && (j <= 2)) {
/* 2nd and 3rd are 8 KiB */
flash_info[i].start[j] =
flashbase + 0x4000 + 0x2000 * (j - 1);
}
if (j == 3) {
/* 4th is 32 KiB */
flash_info[i].start[j] = flashbase + 0x8000;
}
if ((j >= 4) && (j <= 34)) {
/* rest is 256 KiB */
flash_info[i].start[j] =
flashbase + 0x10000 + 0x10000 * (j - 4);
}
}
break;
case 0:
cfm_flash_init (&flash_info[i]);
break;
default:
panic ("configured to many flash banks!\n");
}
size += flash_info[i].size;
}
flash_protect (FLAG_PROTECT_SET,
CFG_FLASH_BASE,
CFG_FLASH_BASE + 0xffff, &flash_info[0]);
return size;
}
#define CMD_READ_ARRAY 0x00F0
#define CMD_UNLOCK1 0x00AA
#define CMD_UNLOCK2 0x0055
#define CMD_ERASE_SETUP 0x0080
#define CMD_ERASE_CONFIRM 0x0030
#define CMD_PROGRAM 0x00A0
#define CMD_UNLOCK_BYPASS 0x0020
#define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
#define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
#define BIT_ERASE_DONE 0x0080
#define BIT_RDY_MASK 0x0080
#define BIT_PROGRAM_ERROR 0x0020
#define BIT_TIMEOUT 0x80000000 /* our flag */
#define ERR_READY -1
int amd_flash_erase_sector(flash_info_t * info, int sector)
{
int state;
ulong result;
volatile u16 *addr =
(volatile u16 *) (info->start[sector]);
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
*addr = CMD_ERASE_CONFIRM;
/* wait until flash is ready */
state = 0;
set_timer (0);
do {
result = *addr;
/* check timeout */
if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
state = ERR_TIMOUT;
}
if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
state = ERR_READY;
}
while (!state);
if (state == ERR_READY)
state = ERR_OK;
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
return state;
}
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
int iflag, cflag;
int sector;
int rc;
rc = ERR_OK;
if (info->flash_id == FLASH_UNKNOWN)
{
rc = ERR_UNKNOWN_FLASH_TYPE;
} /* (info->flash_id == FLASH_UNKNOWN) */
if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
{
rc = ERR_INVAL;
}
cflag = icache_status ();
icache_disable ();
iflag = disable_interrupts ();
for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
if (info->protect[sector])
{
putc('P'); /* protected sector will not erase */
}
else
{
/* erase on unprotected sector */
puts("E\b");
switch (info->flash_id & FLASH_VENDMASK)
{
case (AMD_MANUFACT & FLASH_VENDMASK):
rc = amd_flash_erase_sector(info,sector);
break;
case (FREESCALE_MANUFACT & FLASH_VENDMASK):
rc = cfm_flash_erase_sector(info,sector);
break;
default:
return ERR_UNKNOWN_FLASH_VENDOR;
}
putc('.');
}
}
if (rc!=ERR_OK)
{
printf ("\n ");
flash_perror (rc);
}
else
{
printf (" done\n");
}
udelay (10000); /* allow flash to settle - wait 10 ms */
if (iflag)
enable_interrupts ();
if (cflag)
icache_enable ();
return rc;
}
volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
{
volatile u16 *addr;
ulong result;
int cflag, iflag;
int state;
/*
* Check if Flash is (sufficiently) erased
*/
addr = (volatile u16 *) dest;
result = *addr;
if ((result & data) != data)
return ERR_NOT_ERASED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
cflag = icache_status ();
icache_disable ();
iflag = disable_interrupts ();
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
MEM_FLASH_ADDR1 = CMD_PROGRAM;
*addr = data;
/* arm simple, non interrupt dependent timer */
set_timer (0);
/* wait until flash is ready */
state = 0;
do {
result = *addr;
/* check timeout */
if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
state = ERR_TIMOUT;
}
if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
state = ERR_READY;
} while (!state);
*addr = CMD_READ_ARRAY;
if (state == ERR_READY)
state = ERR_OK;
if ((*addr != data) && (state != ERR_TIMOUT))
state = ERR_PROG_ERROR;
if (iflag)
enable_interrupts ();
if (cflag)
icache_enable ();
return state;
}
int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
int rc;
ulong dest;
u16 data;
rc = ERR_OK;
if (addr & 1)
{
debug ("Byte alignment not supported\n");
rc = ERR_ALIGN;
}
if (cnt & 1)
{
debug ("Byte transfer not supported\n");
rc = ERR_ALIGN;
}
dest = addr;
while ((cnt>=2) && (rc == ERR_OK))
{
data =*((volatile u16 *) src);
rc=amd_write_word (info,dest,data);
src +=2;
dest +=2;
cnt -=2;
}
return rc;
}
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
int rc;
switch (info->flash_id & FLASH_VENDMASK)
{
case (AMD_MANUFACT & FLASH_VENDMASK):
rc = amd_flash_write_buff(info,src,addr,cnt);
break;
case (FREESCALE_MANUFACT & FLASH_VENDMASK):
rc = cfm_flash_write_buff(info,src,addr,cnt);
break;
default:
rc = ERR_UNKNOWN_FLASH_VENDOR;
}
return rc;
}
int amd_flash_protect(flash_info_t * info,long sector,int prot)
{
int rc;
rc= ERR_OK;
if (prot)
{
info->protect[sector]=1;
}
else
{
info->protect[sector]=0;
}
return rc;
}
#ifdef CFG_FLASH_PROTECTION
int flash_real_protect(flash_info_t * info,long sector,int prot)
{
int rc;
switch (info->flash_id & FLASH_VENDMASK)
{
case (AMD_MANUFACT & FLASH_VENDMASK):
rc = amd_flash_protect(info,sector,prot);
break;
case (FREESCALE_MANUFACT & FLASH_VENDMASK):
rc = cfm_flash_protect(info,sector,prot);
break;
default:
rc = ERR_UNKNOWN_FLASH_VENDOR;
}
return rc;
}
#endif