blob: 14fdd8a7006d8285c2d5bfcffefb22c2a0f7f597 [file] [log] [blame]
/*
* Copyright (C) 2006 Mindspeed Technologies, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
*/
#define CONFIG_COMCERTO 1
#define CONFIG_ARM1136 1 /* This is an arm1136j-s CPU core */
#define CONFIG_COMCERTO_100 1 /* It's an SoC */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/* Mindspeed version */
#define CONFIG_IDENT_STRING " Mindspeed $Name: uboot_c2k_1_00_1 $"
/*
* Linux boot configuration
*/
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
//#define CONFIG_INITRD_TAG 1
#define LINUX_BOOTPARAM_ADDR (PHYS_SDRAM + MSP_BOTTOM_MEMORY_RESERVED_SIZE + 0x100)
/*
* Relocation options
*/
#define CONFIG_UBOOT_LOADED_IN_ARAM
//#define CONFIG_SKIP_RELOCATE_UBOOT
//#define CONFIG_SKIP_LOWLEVEL_INIT
/*
* RAM configuration
*/
/*
* Memory Mapping
*/
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x80000000
#define PHYS_SDRAM_SIZE 0x04000000 /* 64 MB */
/*
* Hardware drivers
*/
/*
* UART configuration
*/
/* define one of these to choose the UART0 or UART1 as console */
#define CONFIG_UART0 1
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
/*
* Emac Settings
*/
#undef CONFIG_COMCERTO_GEMAC
// GEMAC mode configured by bootstrap pins or SW
#undef CONFIG_COMCERTO_MII_CFG_BOOTSTRAP
//#define CONFIG_COMCERTO_MII_CFG_BOOTSTRAP
#define GEMAC0_PHY_ADDR 0
#define GEMAC0_CONFIG CONFIG_COMCERTO_USE_RGMII
#define GEMAC0_MODE (GEMAC_SW_CONF | GEMAC_SW_FULL_DUPLEX | GEMAC_SW_SPEED_1G)
#define GEMAC0_PHY_FLAGS GEMAC_PHY_AUTONEG
#define GEMAC0_PHYIDX 0
#define GEMAC1_PHY_ADDR 0
#define GEMAC1_CONFIG CONFIG_COMCERTO_USE_RGMII
#define GEMAC1_MODE (GEMAC_SW_CONF | GEMAC_SW_FULL_DUPLEX | GEMAC_SW_SPEED_1G)
#define GEMAC1_PHY_FLAGS GEMAC_NO_PHY
#define GEMAC1_PHYIDX 0
#undef CONFIG_NET_MULTI
/*
* Shell configuration
*/
#define CONFIG_COMMANDS (CFG_CMD_FLASH | /*CFG_CMD_ENV |*/ CFG_CMD_MEMORY | CFG_CMD_RUN /*| CFG_CMD_NET | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_PING | CFG_CMD_NFS | CFG_CMD_I2C | CFG_CMD_EEPROM */)
#define CONFIG_NO_GZIP 1
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "Comcerto-100 > " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
/*
* User Interface
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=comcerto100\0" \
"netdev=eth0\0" \
"flashargs=setenv bootargs init=${init_process} root=/dev/mtdblock2 rootfstype=${rootfstype} rw\0" \
"rootfstype=jffs2\0" \
"init_process=/etc/preinit\0" \
"addeth=setenv bootargs ${bootargs} " \
"hwaddress=${netdev},${ethaddr}\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"boot_flash=run flashargs addeth addtty addmtd; fsload /boot/uImage; bootm\0" \
"kernelfile=uImage\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"partition=" MTDPARTITION_DEFAULT "\0" \
"mtddevnum=2\0" \
"mtddevname=fs\0" \
"writeboot=protect off 1:0-3\;erase 1:0-3;cp.b 81000000 20000000 40000\0" \
""
#define CONFIG_ETHADDR 00:aa:bb:cc:dd:ee
#include <cmd_confdefs.h>
#define CFG_LOAD_ADDR (PHYS_SDRAM + 0x01000000) /* default load address */
#define CFG_MEMTEST_START CFG_LOAD_ADDR /* memtest works on */
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x800000)
#define BOARD_LATE_INIT
#define MSP_BOTTOM_MEMORY_RESERVED_SIZE 0x800000 /* 8 MiB reserved for MSP */
#define MSP_TOP_MEMORY_RESERVED_SIZE 0x0 /* 0 MiB reserved for MSP */
/*
* Network Configuration
*/
#define CONFIG_NET_RETRY_COUNT 5
/*
* Flash Configuration - Using CFI driver
*/
//#define CFG_FLASH_AM040_DRIVER 1 /* enable AM040 flash driver */
#undef CFG_FLASH_AM040_DRIVER /* disable AM040 flash driver */
//#define CFG_FLASH_AMLV640U_DRIVER 1 /* enable AMLV640U flash driver */
#undef CFG_FLASH_AMLV640U_DRIVER /* disable AMLV640U flash driver */
//#define CFG_FLASH_AMLV640U_SIZE 0x400000 /* (Acessible) Size of the AMLV640U flash device */
#define CFG_FLASH_CFI_DRIVER 1 /* enable CFI driver */
//#undef CFG_FLASH_CFI_DRIVER /* disable CFI driver */
#define CFG_MAX_FLASH_SECT 256 /* max # of sectors on one chip */
#undef CFG_FLASH_PROTECTION
#define PHYS_FLASH1 0x20000000 /* Flash Bank #1 */
#define PHYS_FLASH1_SECT_SIZE 0x00010000 /* 64 KiB sectors */
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CFG_FLASH_BANKS_LIST { PHYS_FLASH1 }
#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
#define CFG_FLASH_COMPLEX_MAPPINGS
/*
* CFI driver
*/
#if defined(CFG_FLASH_CFI_DRIVER)
#define CFG_FLASH_CFI 1 /* flash is CFI conformant */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#define CFG_FLASH_QUIET_TEST
/*
* Monitor configuration
*/
#define CFG_MONITOR_BASE PHYS_FLASH1
#define CFG_MONITOR_LEN (2 * PHYS_FLASH1_SECT_SIZE) /* Reserve 128 KiB for Monitor */
#endif
/*
* Enviroment in flash
*/
#undef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_IS_NOWHERE 1
#if defined(CFG_ENV_IS_IN_FLASH)
#define CFG_ENV_ADDR (PHYS_FLASH1 + 4 * PHYS_FLASH1_SECT_SIZE) /* Keep 4 sectors for U-boot image */
#define CFG_ENV_SECT_SIZE PHYS_FLASH1_SECT_SIZE
//#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#endif
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment 16KiB */
#define CONFIG_ENV_OVERWRITE 1
/*
* NAND Configuration
*/
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#define CFG_NAND_BASE EXP_CSP4_BASEADDR
#define CFG_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
#define CONFIG_JFFS2_NAND 1
#endif
/* NAND GPIOs config */
#define CFG_NAND_BR_GPIO 6
#define CFG_NAND_CE_GPIO 29
#define CFG_NAND_CLE_GPIO 31
#define CFG_NAND_ALE_GPIO 30
/*
* JFFS2 Configuration
*/
/* mtdparts command line support */
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor0=comcertoflash.0"
#define MTDPARTS_DEFAULT "mtdparts=comcertoflash.0:256k(u-boot),128k(env),16000k(fs)"
#define MTDPARTITION_DEFAULT "nor0,2"
#define CFG_REFCLKFREQ 24000000 /* 24 MHz */
#define CFG_HZ 1000
#define CFG_HZ_CLOCK 165000000 /* 165 MHz, must be multiple of 33MHz */
#if 0 /* CFG_ARM_CLOCK configuration is pushing from u-boot Makefile into config.h based on the SKU */
#define CFG_ARM_CLOCK 450000000 /* 450 MHz, must be multiple of 25MHz */
#endif
/*
* Initial stack configuration
*/
#define CFG_INIT_RAM_ADDR 0x0A000000 /* ARAM_BASEADDR Base address */
#define CFG_INIT_RAM_END 0x00010000 /* 64K */
#define CFG_ARAM_CODE_SIZE 0x00000400 /* 1K */
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - CFG_ARAM_CODE_SIZE
/*
* Malloc/stack configuration
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#error CONFIG_USE_IRQ not supported
#endif
/*
* DDR Training algorithm
*/
#define DDR_TRAINING
//#undef DDR_TRAINING
#define DDR_TRAINING_DBG
/* New DDR training defines (Bug #44131) */
#define NEW_DDR_TRAINING //undef this for old training
//#undef NEW_DDR_TRAINING //undef this for old training
#endif /* __CONFIG_H */