| /* |
| * Copyright (C) 2011 Freescale Semiconductor, Inc. |
| * |
| * Authors: Chunhe Lan <b25806@freescale.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| */ |
| |
| #ifndef __BCSR_H_ |
| #define __BCSR_H_ |
| |
| #include <common.h> |
| |
| /* |
| * BCSR Bit definitions |
| * BCSR 15 * |
| 0 device insertion oriention |
| 1 stack processor present |
| 2 power supply shut down/normal operation |
| 3 I2C bus0 drive enable |
| 4 reserved |
| 5:7 I2C bus0 select |
| 5 - I2C_BUS_0_SS0 |
| 6 - I2C_BUS_0_SS1 |
| 7 - I2C_BUS_0_SS2 |
| */ |
| |
| /* BCSR register base address is 0xFX000020 */ |
| #define BCSR_BASE_REG_OFFSET 0x20 |
| #define BCSR_ACCESS_REG_ADDR (CONFIG_SYS_BCSR_BASE + BCSR_BASE_REG_OFFSET) |
| |
| #define BCSR15_DEV_INS_ORI 0x80 |
| #define BCSR15_STACK_PRO_PRE 0x40 |
| #define BCSR15_POWER_SUPPLY 0x20 |
| #define BCSR15_I2C_BUS0_EN 0x10 |
| #define BCSR15_I2C_BUS0_SEG0 0x00 |
| #define BCSR15_I2C_BUS0_SEG1 0x04 |
| #define BCSR15_I2C_BUS0_SEG2 0x02 |
| #define BCSR15_I2C_BUS0_SEG3 0x06 |
| #define BCSR15_I2C_BUS0_SEG4 0x01 |
| #define BCSR15_I2C_BUS0_SEG5 0x05 |
| #define BCSR15_I2C_BUS0_SEG6 0x03 |
| #define BCSR15_I2C_BUS0_SEG7 0x07 |
| #define BCSR15_I2C_BUS0_SEG_CLR 0x07 |
| #define BCSR19_SGMII_SEL_L 0x01 |
| |
| /*BCSR Utils functions*/ |
| void fixup_i2c_bus0_sel_seg0(void); |
| #endif /* __BCSR_H_ */ |
