| /* |
| * (C) Copyright 2010 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| * Contributor: Mahavir Jain <mjain@marvell.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| #ifndef _ASM_ARCH_ARMADA100_H |
| #define _ASM_ARCH_ARMADA100_H |
| |
| #if defined (CONFIG_ARMADA100) |
| |
| /* Common APB clock register bit definitions */ |
| #define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */ |
| #define APBC_FNCLK (1<<1) /* Functional Clock Enable */ |
| #define APBC_RST (1<<2) /* Reset Generation */ |
| /* Functional Clock Selection Mask */ |
| #define APBC_FNCLKSEL(x) (((x) & 0xf) << 4) |
| |
| /* Fast Ethernet Controller Clock register definition */ |
| #define FE_CLK_RST 0x1 |
| #define FE_CLK_ENA 0x8 |
| |
| /* SSP2 Clock Control */ |
| #define SSP2_APBCLK 0x01 |
| #define SSP2_FNCLK 0x02 |
| |
| /* USB Clock/reset control bits */ |
| #define USB_SPH_AXICLK_EN 0x10 |
| #define USB_SPH_AXI_RST 0x02 |
| |
| /* MPMU Clocks */ |
| #define APB2_26M_EN (1 << 20) |
| #define AP_26M (1 << 4) |
| |
| /* Register Base Addresses */ |
| #define ARMD1_DRAM_BASE 0xB0000000 |
| #define ARMD1_FEC_BASE 0xC0800000 |
| #define ARMD1_TIMER_BASE 0xD4014000 |
| #define ARMD1_APBC1_BASE 0xD4015000 |
| #define ARMD1_APBC2_BASE 0xD4015800 |
| #define ARMD1_UART1_BASE 0xD4017000 |
| #define ARMD1_UART2_BASE 0xD4018000 |
| #define ARMD1_GPIO_BASE 0xD4019000 |
| #define ARMD1_SSP1_BASE 0xD401B000 |
| #define ARMD1_SSP2_BASE 0xD401C000 |
| #define ARMD1_MFPR_BASE 0xD401E000 |
| #define ARMD1_SSP3_BASE 0xD401F000 |
| #define ARMD1_SSP4_BASE 0xD4020000 |
| #define ARMD1_SSP5_BASE 0xD4021000 |
| #define ARMD1_UART3_BASE 0xD4026000 |
| #define ARMD1_MPMU_BASE 0xD4050000 |
| #define ARMD1_USB_HOST_BASE 0xD4209000 |
| #define ARMD1_APMU_BASE 0xD4282800 |
| #define ARMD1_CPU_BASE 0xD4282C00 |
| |
| #endif /* CONFIG_ARMADA100 */ |
| #endif /* _ASM_ARCH_ARMADA100_H */ |
