| /* |
| * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301, USA. |
| */ |
| |
| #ifndef _LPC32XX_UART_H |
| #define _LPC32XX_UART_H |
| |
| #include <asm/types.h> |
| |
| /* 14-clock UART Registers */ |
| struct hsuart_regs { |
| union { |
| u32 rx; /* Receiver FIFO */ |
| u32 tx; /* Transmitter FIFO */ |
| }; |
| u32 level; /* FIFO Level Register */ |
| u32 iir; /* Interrupt ID Register */ |
| u32 ctrl; /* Control Register */ |
| u32 rate; /* Rate Control Register */ |
| }; |
| |
| /* 14-clock UART Receiver FIFO Register bits */ |
| #define HSUART_RX_BREAK (1 << 10) |
| #define HSUART_RX_ERROR (1 << 9) |
| #define HSUART_RX_EMPTY (1 << 8) |
| #define HSUART_RX_DATA (0xff << 0) |
| |
| /* 14-clock UART Level Register bits */ |
| #define HSUART_LEVEL_TX (0xff << 8) |
| #define HSUART_LEVEL_RX (0xff << 0) |
| |
| /* 14-clock UART Interrupt Identification Register bits */ |
| #define HSUART_IIR_TX_INT_SET (1 << 6) |
| #define HSUART_IIR_RX_OE (1 << 5) |
| #define HSUART_IIR_BRK (1 << 4) |
| #define HSUART_IIR_FE (1 << 3) |
| #define HSUART_IIR_RX_TIMEOUT (1 << 2) |
| #define HSUART_IIR_RX_TRIG (1 << 1) |
| #define HSUART_IIR_TX (1 << 0) |
| |
| /* 14-clock UART Control Register bits */ |
| #define HSUART_CTRL_HRTS_INV (1 << 21) |
| #define HSUART_CTRL_HRTS_TRIG_48 (0x3 << 19) |
| #define HSUART_CTRL_HRTS_TRIG_32 (0x2 << 19) |
| #define HSUART_CTRL_HRTS_TRIG_16 (0x1 << 19) |
| #define HSUART_CTRL_HRTS_TRIG_8 (0x0 << 19) |
| #define HSUART_CTRL_HRTS_EN (1 << 18) |
| #define HSUART_CTRL_TMO_16 (0x3 << 16) |
| #define HSUART_CTRL_TMO_8 (0x2 << 16) |
| #define HSUART_CTRL_TMO_4 (0x1 << 16) |
| #define HSUART_CTRL_TMO_DISABLED (0x0 << 16) |
| #define HSUART_CTRL_HCTS_INV (1 << 15) |
| #define HSUART_CTRL_HCTS_EN (1 << 14) |
| #define HSUART_CTRL_HSU_OFFSET(n) ((n) << 9) |
| #define HSUART_CTRL_HSU_BREAK (1 << 8) |
| #define HSUART_CTRL_HSU_ERR_INT_EN (1 << 7) |
| #define HSUART_CTRL_HSU_RX_INT_EN (1 << 6) |
| #define HSUART_CTRL_HSU_TX_INT_EN (1 << 5) |
| #define HSUART_CTRL_HSU_RX_TRIG_48 (0x5 << 2) |
| #define HSUART_CTRL_HSU_RX_TRIG_32 (0x4 << 2) |
| #define HSUART_CTRL_HSU_RX_TRIG_16 (0x3 << 2) |
| #define HSUART_CTRL_HSU_RX_TRIG_8 (0x2 << 2) |
| #define HSUART_CTRL_HSU_RX_TRIG_4 (0x1 << 2) |
| #define HSUART_CTRL_HSU_RX_TRIG_1 (0x0 << 2) |
| #define HSUART_CTRL_HSU_TX_TRIG_16 (0x3 << 0) |
| #define HSUART_CTRL_HSU_TX_TRIG_8 (0x2 << 0) |
| #define HSUART_CTRL_HSU_TX_TRIG_4 (0x1 << 0) |
| #define HSUART_CTRL_HSU_TX_TRIG_0 (0x0 << 0) |
| |
| /* UART Control Registers */ |
| struct uart_ctrl_regs { |
| u32 ctrl; /* Control Register */ |
| u32 clkmode; /* Clock Mode Register */ |
| u32 loop; /* Loopback Control Register */ |
| }; |
| |
| /* UART Control Register bits */ |
| #define UART_CTRL_UART3_MD_CTRL (1 << 11) |
| #define UART_CTRL_HDPX_INV (1 << 10) |
| #define UART_CTRL_HDPX_EN (1 << 9) |
| #define UART_CTRL_UART6_IRDA (1 << 5) |
| #define UART_CTRL_IR_TX6_INV (1 << 4) |
| #define UART_CTRL_IR_RX6_INV (1 << 3) |
| #define UART_CTRL_IR_RX_LENGTH (1 << 2) |
| #define UART_CTRL_IR_TX_LENGTH (1 << 1) |
| #define UART_CTRL_UART5_USB_MODE (1 << 0) |
| |
| /* UART Clock Mode Register bits */ |
| #define UART_CLKMODE_STATX(n) (1 << ((n) + 16)) |
| #define UART_CLKMODE_STAT (1 << 14) |
| #define UART_CLKMODE_MASK(n) (0x3 << (2 * (n) - 2)) |
| #define UART_CLKMODE_AUTO(n) (0x2 << (2 * (n) - 2)) |
| #define UART_CLKMODE_ON(n) (0x1 << (2 * (n) - 2)) |
| #define UART_CLKMODE_OFF(n) (0x0 << (2 * (n) - 2)) |
| |
| /* UART Loopback Control Register bits */ |
| #define UART_LOOPBACK(n) (1 << ((n) - 1)) |
| |
| #endif /* _LPC32XX_UART_H */ |