| /****************************************************************************** |
| * |
| * Name: skgedrv.h |
| * Project: Gigabit Ethernet Adapters, Common Modules |
| * Version: $Revision: 2.4 $ |
| * Date: $Date: 2006/01/19 14:02:08 $ |
| * Purpose: Interface with the driver |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * LICENSE: |
| * (C)Copyright 1998-2002 SysKonnect. |
| * (C)Copyright 2002-2006 Marvell. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * The information in this file is provided "AS IS" without warranty. |
| * /LICENSE |
| * |
| ******************************************************************************/ |
| |
| #ifndef __INC_SKGEDRV_H_ |
| #define __INC_SKGEDRV_H_ |
| |
| /* defines ********************************************************************/ |
| |
| /* |
| * Define the driver events. |
| * Usually the events are defined by the destination module. |
| * In case of the driver we put the definition of the events here. |
| */ |
| #define SK_DRV_PORT_RESET 1 /* The port needs to be reset */ |
| #define SK_DRV_NET_UP 2 /* The net is operational */ |
| #define SK_DRV_NET_DOWN 3 /* The net is down */ |
| #define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */ |
| #define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */ |
| #define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */ |
| #define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */ |
| #define SK_DRV_PORT_FAIL 8 /* One port fails */ |
| #define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */ |
| #define SK_DRV_POWER_DOWN 10 /* Power down mode */ |
| #define SK_DRV_TIMER 11 /* Timer for free use */ |
| #ifdef SK_NO_RLMT |
| #define SK_DRV_LINK_UP 12 /* Link Up event for driver */ |
| #define SK_DRV_LINK_DOWN 13 /* Link Down event for driver */ |
| #endif |
| #define SK_DRV_DOWNSHIFT_DET 14 /* Downshift 4-Pair / 2-Pair (YUKON only) */ |
| #define SK_DRV_RX_OVERFLOW 15 /* Receive Overflow */ |
| #define SK_DRV_LIPA_NOT_AN_ABLE 16 /* Link Partner not Auto-Negotiation able */ |
| #define SK_DRV_PEX_LINK_WIDTH 17 /* PEX negotiated Link width not maximum */ |
| #endif /* __INC_SKGEDRV_H_ */ |
