| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef _TEGRA_USB_H_ |
| #define _TEGRA_USB_H_ |
| |
| |
| /* USB Controller (USBx_CONTROLLER_) regs */ |
| struct usb_ctlr { |
| /* 0x000 */ |
| uint id; |
| uint reserved0; |
| uint host; |
| uint device; |
| |
| /* 0x010 */ |
| uint txbuf; |
| uint rxbuf; |
| uint reserved1[2]; |
| |
| /* 0x020 */ |
| uint reserved2[56]; |
| |
| /* 0x100 */ |
| u16 cap_length; |
| u16 hci_version; |
| uint hcs_params; |
| uint hcc_params; |
| uint reserved3[5]; |
| |
| /* 0x120 */ |
| uint dci_version; |
| uint dcc_params; |
| uint reserved4[6]; |
| |
| /* 0x140 */ |
| uint usb_cmd; |
| uint usb_sts; |
| uint usb_intr; |
| uint frindex; |
| |
| /* 0x150 */ |
| uint reserved5; |
| uint periodic_list_base; |
| uint async_list_addr; |
| uint async_tt_sts; |
| |
| /* 0x160 */ |
| uint burst_size; |
| uint tx_fill_tuning; |
| uint reserved6; /* is this port_sc1 on some controllers? */ |
| uint icusb_ctrl; |
| |
| /* 0x170 */ |
| uint ulpi_viewport; |
| uint reserved7; |
| uint endpt_nak; |
| uint endpt_nak_enable; |
| |
| /* 0x180 */ |
| uint reserved; |
| uint port_sc1; |
| uint reserved8[6]; |
| |
| /* 0x1a0 */ |
| uint reserved9; |
| uint otgsc; |
| uint usb_mode; |
| uint endpt_setup_stat; |
| |
| /* 0x1b0 */ |
| uint reserved10[20]; |
| |
| /* 0x200 */ |
| uint reserved11[0x80]; |
| |
| /* 0x400 */ |
| uint susp_ctrl; |
| uint phy_vbus_sensors; |
| uint phy_vbus_wakeup_id; |
| uint phy_alt_vbus_sys; |
| |
| /* 0x410 */ |
| uint usb1_legacy_ctrl; |
| uint reserved12[4]; |
| |
| /* 0x424 */ |
| uint ulpi_timing_ctrl_0; |
| uint ulpi_timing_ctrl_1; |
| uint reserved13[53]; |
| |
| /* 0x500 */ |
| uint reserved14[64 * 3]; |
| |
| /* 0x800 */ |
| uint utmip_pll_cfg0; |
| uint utmip_pll_cfg1; |
| uint utmip_xcvr_cfg0; |
| uint utmip_bias_cfg0; |
| |
| /* 0x810 */ |
| uint utmip_hsrx_cfg0; |
| uint utmip_hsrx_cfg1; |
| uint utmip_fslsrx_cfg0; |
| uint utmip_fslsrx_cfg1; |
| |
| /* 0x820 */ |
| uint utmip_tx_cfg0; |
| uint utmip_misc_cfg0; |
| uint utmip_misc_cfg1; |
| uint utmip_debounce_cfg0; |
| |
| /* 0x830 */ |
| uint utmip_bat_chrg_cfg0; |
| uint utmip_spare_cfg0; |
| uint utmip_xcvr_cfg1; |
| uint utmip_bias_cfg1; |
| }; |
| |
| |
| /* USB1_LEGACY_CTRL */ |
| #define USB1_NO_LEGACY_MODE 1 |
| |
| #define VBUS_SENSE_CTL_SHIFT 1 |
| #define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT) |
| #define VBUS_SENSE_CTL_VBUS_WAKEUP 0 |
| #define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1 |
| #define VBUS_SENSE_CTL_AB_SESS_VLD 2 |
| #define VBUS_SENSE_CTL_A_SESS_VLD 3 |
| |
| /* USB2_IF_ULPI_TIMING_CTRL_0 */ |
| #define ULPI_OUTPUT_PINMUX_BYP (1 << 10) |
| #define ULPI_CLKOUT_PINMUX_BYP (1 << 11) |
| |
| /* USB2_IF_ULPI_TIMING_CTRL_1 */ |
| #define ULPI_DATA_TRIMMER_LOAD (1 << 0) |
| #define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) |
| #define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) |
| #define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) |
| #define ULPI_DIR_TRIMMER_LOAD (1 << 24) |
| #define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) |
| |
| /* USBx_IF_USB_SUSP_CTRL_0 */ |
| #define ULPI_PHY_ENB (1 << 13) |
| #define UTMIP_PHY_ENB (1 << 12) |
| #define UTMIP_RESET (1 << 11) |
| #define USB_PHY_CLK_VALID (1 << 7) |
| #define USB_SUSP_CLR (1 << 5) |
| |
| /* USBx_UTMIP_MISC_CFG1 */ |
| #define UTMIP_PLLU_STABLE_COUNT_SHIFT 6 |
| #define UTMIP_PLLU_STABLE_COUNT_MASK \ |
| (0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT) |
| #define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18 |
| #define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \ |
| (0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT) |
| #define UTMIP_PHY_XTAL_CLOCKEN (1 << 30) |
| |
| /* USBx_UTMIP_PLL_CFG1_0 */ |
| #define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27 |
| #define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \ |
| (0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT) |
| #define UTMIP_XTAL_FREQ_COUNT_SHIFT 0 |
| #define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff |
| |
| /* USBx_UTMIP_BIAS_CFG1_0 */ |
| #define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3 |
| #define UTMIP_BIAS_PDTRK_COUNT_MASK \ |
| (0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT) |
| |
| #define UTMIP_DEBOUNCE_CFG0_SHIFT 0 |
| #define UTMIP_DEBOUNCE_CFG0_MASK 0xffff |
| |
| /* USBx_UTMIP_TX_CFG0_0 */ |
| #define UTMIP_FS_PREAMBLE_J (1 << 19) |
| |
| /* USBx_UTMIP_BAT_CHRG_CFG0_0 */ |
| #define UTMIP_PD_CHRG 1 |
| |
| /* USBx_UTMIP_XCVR_CFG0_0 */ |
| #define UTMIP_XCVR_LSBIAS_SE (1 << 21) |
| |
| /* USBx_UTMIP_SPARE_CFG0_0 */ |
| #define FUSE_SETUP_SEL (1 << 3) |
| |
| /* USBx_UTMIP_HSRX_CFG0_0 */ |
| #define UTMIP_IDLE_WAIT_SHIFT 15 |
| #define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT) |
| #define UTMIP_ELASTIC_LIMIT_SHIFT 10 |
| #define UTMIP_ELASTIC_LIMIT_MASK \ |
| (0x1f << UTMIP_ELASTIC_LIMIT_SHIFT) |
| |
| /* USBx_UTMIP_HSRX_CFG0_1 */ |
| #define UTMIP_HS_SYNC_START_DLY_SHIFT 1 |
| #define UTMIP_HS_SYNC_START_DLY_MASK \ |
| (0xf << UTMIP_HS_SYNC_START_DLY_SHIFT) |
| |
| /* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */ |
| #define IC_ENB1 (1 << 3) |
| |
| /* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */ |
| #define PTS_SHIFT 30 |
| #define PTS_MASK (3U << PTS_SHIFT) |
| #define PTS_UTMI 0 |
| #define PTS_RESERVED 1 |
| #define PTS_ULPI 2 |
| #define PTS_ICUSB_SER 3 |
| |
| #define STS (1 << 29) |
| #define WKOC (1 << 22) |
| #define WKDS (1 << 21) |
| #define WKCN (1 << 20) |
| |
| /* USBx_UTMIP_XCVR_CFG0_0 */ |
| #define UTMIP_FORCE_PD_POWERDOWN (1 << 14) |
| #define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) |
| #define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) |
| |
| /* USBx_UTMIP_XCVR_CFG1_0 */ |
| #define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) |
| #define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) |
| #define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) |
| |
| /* USB3_IF_USB_PHY_VBUS_SENSORS_0 */ |
| #define VBUS_VLD_STS (1 << 26) |
| |
| |
| /* Change the USB host port into host mode */ |
| void usb_set_host_mode(void); |
| |
| /* Setup USB on the board */ |
| int board_usb_init(const void *blob); |
| |
| /** |
| * Start up the given port number (ports are numbered from 0 on each board). |
| * This returns values for the appropriate hccr and hcor addresses to use for |
| * USB EHCI operations. |
| * |
| * @param portnum port number to start |
| * @param hccr returns start address of EHCI HCCR registers |
| * @param hcor returns start address of EHCI HCOR registers |
| * @return 0 if ok, -1 on error (generally invalid port number) |
| */ |
| int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor); |
| |
| /** |
| * Stop the current port |
| * |
| * @return 0 if ok, -1 if no port was active |
| */ |
| int tegrausb_stop_port(int portnum); |
| |
| #endif /* _TEGRA_USB_H_ */ |