| /* |
| * (C) Copyright 2001 |
| * Denis Peter, MPL AG Switzerland |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| * Note: Part of this code has been derived from linux |
| * |
| */ |
| #ifndef _USB_DEFS_H_ |
| #define _USB_DEFS_H_ |
| |
| /* USB constants */ |
| |
| /* Device and/or Interface Class codes */ |
| #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ |
| #define USB_CLASS_AUDIO 1 |
| #define USB_CLASS_COMM 2 |
| #define USB_CLASS_HID 3 |
| #define USB_CLASS_PRINTER 7 |
| #define USB_CLASS_MASS_STORAGE 8 |
| #define USB_CLASS_HUB 9 |
| #define USB_CLASS_DATA 10 |
| #define USB_CLASS_VENDOR_SPEC 0xff |
| |
| /* some HID sub classes */ |
| #define USB_SUB_HID_NONE 0 |
| #define USB_SUB_HID_BOOT 1 |
| |
| /* some UID Protocols */ |
| #define USB_PROT_HID_NONE 0 |
| #define USB_PROT_HID_KEYBOARD 1 |
| #define USB_PROT_HID_MOUSE 2 |
| |
| |
| /* Sub STORAGE Classes */ |
| #define US_SC_RBC 1 /* Typically, flash devices */ |
| #define US_SC_8020 2 /* CD-ROM */ |
| #define US_SC_QIC 3 /* QIC-157 Tapes */ |
| #define US_SC_UFI 4 /* Floppy */ |
| #define US_SC_8070 5 /* Removable media */ |
| #define US_SC_SCSI 6 /* Transparent */ |
| #define US_SC_MIN US_SC_RBC |
| #define US_SC_MAX US_SC_SCSI |
| |
| /* STORAGE Protocols */ |
| #define US_PR_CB 1 /* Control/Bulk w/o interrupt */ |
| #define US_PR_CBI 0 /* Control/Bulk/Interrupt */ |
| #define US_PR_BULK 0x50 /* bulk only */ |
| |
| /* USB types */ |
| #define USB_TYPE_STANDARD (0x00 << 5) |
| #define USB_TYPE_CLASS (0x01 << 5) |
| #define USB_TYPE_VENDOR (0x02 << 5) |
| #define USB_TYPE_RESERVED (0x03 << 5) |
| |
| /* USB recipients */ |
| #define USB_RECIP_DEVICE 0x00 |
| #define USB_RECIP_INTERFACE 0x01 |
| #define USB_RECIP_ENDPOINT 0x02 |
| #define USB_RECIP_OTHER 0x03 |
| |
| /* USB directions */ |
| #define USB_DIR_OUT 0 |
| #define USB_DIR_IN 0x80 |
| |
| /* Descriptor types */ |
| #define USB_DT_DEVICE 0x01 |
| #define USB_DT_CONFIG 0x02 |
| #define USB_DT_STRING 0x03 |
| #define USB_DT_INTERFACE 0x04 |
| #define USB_DT_ENDPOINT 0x05 |
| |
| #define USB_DT_HID (USB_TYPE_CLASS | 0x01) |
| #define USB_DT_REPORT (USB_TYPE_CLASS | 0x02) |
| #define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) |
| #define USB_DT_HUB (USB_TYPE_CLASS | 0x09) |
| |
| /* Descriptor sizes per descriptor type */ |
| #define USB_DT_DEVICE_SIZE 18 |
| #define USB_DT_CONFIG_SIZE 9 |
| #define USB_DT_INTERFACE_SIZE 9 |
| #define USB_DT_ENDPOINT_SIZE 7 |
| #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ |
| #define USB_DT_HUB_NONVAR_SIZE 7 |
| #define USB_DT_HID_SIZE 9 |
| |
| /* Endpoints */ |
| #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ |
| #define USB_ENDPOINT_DIR_MASK 0x80 |
| |
| #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ |
| #define USB_ENDPOINT_XFER_CONTROL 0 |
| #define USB_ENDPOINT_XFER_ISOC 1 |
| #define USB_ENDPOINT_XFER_BULK 2 |
| #define USB_ENDPOINT_XFER_INT 3 |
| |
| /* USB Packet IDs (PIDs) */ |
| #define USB_PID_UNDEF_0 0xf0 |
| #define USB_PID_OUT 0xe1 |
| #define USB_PID_ACK 0xd2 |
| #define USB_PID_DATA0 0xc3 |
| #define USB_PID_UNDEF_4 0xb4 |
| #define USB_PID_SOF 0xa5 |
| #define USB_PID_UNDEF_6 0x96 |
| #define USB_PID_UNDEF_7 0x87 |
| #define USB_PID_UNDEF_8 0x78 |
| #define USB_PID_IN 0x69 |
| #define USB_PID_NAK 0x5a |
| #define USB_PID_DATA1 0x4b |
| #define USB_PID_PREAMBLE 0x3c |
| #define USB_PID_SETUP 0x2d |
| #define USB_PID_STALL 0x1e |
| #define USB_PID_UNDEF_F 0x0f |
| |
| /* Standard requests */ |
| #define USB_REQ_GET_STATUS 0x00 |
| #define USB_REQ_CLEAR_FEATURE 0x01 |
| #define USB_REQ_SET_FEATURE 0x03 |
| #define USB_REQ_SET_ADDRESS 0x05 |
| #define USB_REQ_GET_DESCRIPTOR 0x06 |
| #define USB_REQ_SET_DESCRIPTOR 0x07 |
| #define USB_REQ_GET_CONFIGURATION 0x08 |
| #define USB_REQ_SET_CONFIGURATION 0x09 |
| #define USB_REQ_GET_INTERFACE 0x0A |
| #define USB_REQ_SET_INTERFACE 0x0B |
| #define USB_REQ_SYNCH_FRAME 0x0C |
| |
| /* HID requests */ |
| #define USB_REQ_GET_REPORT 0x01 |
| #define USB_REQ_GET_IDLE 0x02 |
| #define USB_REQ_GET_PROTOCOL 0x03 |
| #define USB_REQ_SET_REPORT 0x09 |
| #define USB_REQ_SET_IDLE 0x0A |
| #define USB_REQ_SET_PROTOCOL 0x0B |
| |
| |
| /* "pipe" definitions */ |
| |
| #define PIPE_ISOCHRONOUS 0 |
| #define PIPE_INTERRUPT 1 |
| #define PIPE_CONTROL 2 |
| #define PIPE_BULK 3 |
| #define PIPE_DEVEP_MASK 0x0007ff00 |
| |
| #define USB_ISOCHRONOUS 0 |
| #define USB_INTERRUPT 1 |
| #define USB_CONTROL 2 |
| #define USB_BULK 3 |
| |
| /* USB-status codes: */ |
| #define USB_ST_ACTIVE 0x1 /* TD is active */ |
| #define USB_ST_STALLED 0x2 /* TD is stalled */ |
| #define USB_ST_BUF_ERR 0x4 /* buffer error */ |
| #define USB_ST_BABBLE_DET 0x8 /* Babble detected */ |
| #define USB_ST_NAK_REC 0x10 /* NAK Received*/ |
| #define USB_ST_CRC_ERR 0x20 /* CRC/timeout Error */ |
| #define USB_ST_BIT_ERR 0x40 /* Bitstuff error */ |
| #define USB_ST_NOT_PROC 0x80000000L /* Not yet processed */ |
| |
| |
| /************************************************************************* |
| * Hub defines |
| */ |
| |
| /* |
| * Hub request types |
| */ |
| |
| #define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) |
| #define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) |
| |
| /* |
| * Hub Class feature numbers |
| */ |
| #define C_HUB_LOCAL_POWER 0 |
| #define C_HUB_OVER_CURRENT 1 |
| |
| /* |
| * Port feature numbers |
| */ |
| #define USB_PORT_FEAT_CONNECTION 0 |
| #define USB_PORT_FEAT_ENABLE 1 |
| #define USB_PORT_FEAT_SUSPEND 2 |
| #define USB_PORT_FEAT_OVER_CURRENT 3 |
| #define USB_PORT_FEAT_RESET 4 |
| #define USB_PORT_FEAT_POWER 8 |
| #define USB_PORT_FEAT_LOWSPEED 9 |
| #define USB_PORT_FEAT_HIGHSPEED 10 |
| #define USB_PORT_FEAT_FULLSPEED 11 |
| #define USB_PORT_FEAT_SUPERSPEED 12 |
| #define USB_PORT_FEAT_C_CONNECTION 16 |
| #define USB_PORT_FEAT_C_ENABLE 17 |
| #define USB_PORT_FEAT_C_SUSPEND 18 |
| #define USB_PORT_FEAT_C_OVER_CURRENT 19 |
| #define USB_PORT_FEAT_C_RESET 20 |
| |
| /* wPortStatus bits */ |
| #define USB_PORT_STAT_CONNECTION 0x0001 |
| #define USB_PORT_STAT_ENABLE 0x0002 |
| #define USB_PORT_STAT_SUSPEND 0x0004 |
| #define USB_PORT_STAT_OVERCURRENT 0x0008 |
| #define USB_PORT_STAT_RESET 0x0010 |
| #define USB_PORT_STAT_POWER 0x0100 |
| #define USB_PORT_STAT_LOW_SPEED 0x0200 |
| #define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */ |
| #define USB_PORT_STAT_FULL_SPEED 0x0800 |
| #define USB_PORT_STAT_SUPER_SPEED 0x1000 /* support for XHCI */ |
| #define USB_PORT_STAT_SPEED \ |
| (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED | \ |
| USB_PORT_STAT_FULL_SPEED | USB_PORT_STAT_SUPER_SPEED) |
| |
| /* |
| * Additions to wPortStatus bit field from USB 3.0 |
| * See USB 3.0 spec Table 10-10 |
| */ |
| #define USB_PORT_STAT_LINK_STATE 0x01e0 |
| #define USB_SS_PORT_STAT_POWER 0x0200 |
| #define USB_SS_PORT_STAT_SPEED 0x1c00 |
| #define USB_PORT_STAT_SPEED_5GBPS 0x0000 |
| |
| /* wPortChange bits */ |
| #define USB_PORT_STAT_C_CONNECTION 0x0001 |
| #define USB_PORT_STAT_C_ENABLE 0x0002 |
| #define USB_PORT_STAT_C_SUSPEND 0x0004 |
| #define USB_PORT_STAT_C_OVERCURRENT 0x0008 |
| #define USB_PORT_STAT_C_RESET 0x0010 |
| |
| /* |
| * Addition to wPortChange bit fields form USB 3.0 |
| * See USB 3.0 spec Table 10-11 |
| */ |
| #define USB_PORT_STAT_C_BH_RESET 0x0020 |
| #define USB_PORT_STAT_C_LINK_STATE 0x0040 |
| #define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 |
| |
| /* wHubCharacteristics (masks) */ |
| #define HUB_CHAR_LPSM 0x0003 |
| #define HUB_CHAR_COMPOUND 0x0004 |
| #define HUB_CHAR_OCPM 0x0018 |
| |
| /* |
| * Hub Status & Hub Change bit masks |
| */ |
| #define HUB_STATUS_LOCAL_POWER 0x0001 |
| #define HUB_STATUS_OVERCURRENT 0x0002 |
| |
| #define HUB_CHANGE_LOCAL_POWER 0x0001 |
| #define HUB_CHANGE_OVERCURRENT 0x0002 |
| |
| #endif /*_USB_DEFS_H_ */ |
