| /* |
| * (C) Copyright 2009 |
| * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/ppc4xx-gpio.h> |
| |
| enum { |
| HWTYPE_DLVISION_CPU = 0, |
| HWTYPE_DLVISION_CON = 1, |
| }; |
| |
| #define HWREV_100 6 |
| |
| int board_early_init_f(void) |
| { |
| mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ |
| mtdcr(UIC0ER, 0x00000000); /* disable all ints */ |
| mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */ |
| mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ |
| mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ |
| mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */ |
| mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ |
| |
| /* |
| * EBC Configuration Register: set ready timeout to 512 ebc-clks |
| * -> ca. 15 us |
| */ |
| mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ |
| |
| /* |
| * setup io-latches |
| */ |
| out_le16((void *)CONFIG_SYS_LATCH_BASE, 0x00f0); |
| out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x100), 0x0002); |
| out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x200), 0x0000); |
| return 0; |
| } |
| |
| int misc_init_r(void) |
| { |
| /* |
| * set "startup-finished"-gpios |
| */ |
| gpio_write_bit(21, 0); |
| gpio_write_bit(22, 1); |
| |
| return 0; |
| } |
| |
| /* |
| * Check Board Identity: |
| */ |
| int checkboard(void) |
| { |
| char buf[64]; |
| int i = getenv_f("serial#", buf, sizeof(buf)); |
| u8 channel2_msr = in_8((void *)CONFIG_UART_BASE + 0x26); |
| u8 channel3_msr = in_8((void *)CONFIG_UART_BASE + 0x36); |
| u8 channel7_msr = in_8((void *)CONFIG_UART_BASE + 0x76); |
| u8 unit_type; |
| u8 local_con; |
| u8 audio; |
| u8 hardware_version; |
| |
| printf("Board: "); |
| |
| unit_type = (channel2_msr & 0x80) ? 0x01 : 0x00; |
| local_con = (channel2_msr & 0x20) ? 0x01 : 0x00; |
| audio = (channel3_msr & 0x20) ? 0x01 : 0x00; |
| hardware_version = |
| ((channel7_msr & 0x20) ? 0x01 : 0x00) |
| | ((channel7_msr & 0x80) ? 0x02 : 0x00) |
| | ((channel7_msr & 0x40) ? 0x04 : 0x00); |
| |
| switch (unit_type) { |
| case HWTYPE_DLVISION_CON: |
| printf("DL-Vision-CON"); |
| break; |
| |
| case HWTYPE_DLVISION_CPU: |
| printf("DL-Vision-CPU"); |
| break; |
| |
| default: |
| printf("UnitType %d, unsupported", unit_type); |
| break; |
| } |
| |
| if (i > 0) { |
| puts(", serial# "); |
| puts(buf); |
| } |
| puts("\n "); |
| |
| switch (hardware_version) { |
| case HWREV_100: |
| printf("HW-Ver 1.00"); |
| break; |
| |
| default: |
| printf("HW-Ver %d, unsupported", |
| hardware_version); |
| break; |
| } |
| |
| if (local_con) |
| printf(", local console"); |
| |
| if (audio) |
| printf(", audio support"); |
| |
| puts("\n"); |
| |
| return 0; |
| } |