| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * Copyright (C) 2009 NVIDIA, Corporation |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <asm/unaligned.h> |
| #include <common.h> |
| #include <usb.h> |
| #include <linux/mii.h> |
| #include "usb_ether.h" |
| #include <malloc.h> |
| |
| /* SMSC LAN95xx based USB 2.0 Ethernet Devices */ |
| |
| /* Tx command words */ |
| #define TX_CMD_A_FIRST_SEG_ 0x00002000 |
| #define TX_CMD_A_LAST_SEG_ 0x00001000 |
| |
| /* Rx status word */ |
| #define RX_STS_FL_ 0x3FFF0000 /* Frame Length */ |
| #define RX_STS_ES_ 0x00008000 /* Error Summary */ |
| |
| /* SCSRs */ |
| #define ID_REV 0x00 |
| |
| #define INT_STS 0x08 |
| |
| #define TX_CFG 0x10 |
| #define TX_CFG_ON_ 0x00000004 |
| |
| #define HW_CFG 0x14 |
| #define HW_CFG_BIR_ 0x00001000 |
| #define HW_CFG_RXDOFF_ 0x00000600 |
| #define HW_CFG_MEF_ 0x00000020 |
| #define HW_CFG_BCE_ 0x00000002 |
| #define HW_CFG_LRST_ 0x00000008 |
| |
| #define PM_CTRL 0x20 |
| #define PM_CTL_PHY_RST_ 0x00000010 |
| |
| #define AFC_CFG 0x2C |
| |
| /* |
| * Hi watermark = 15.5Kb (~10 mtu pkts) |
| * low watermark = 3k (~2 mtu pkts) |
| * backpressure duration = ~ 350us |
| * Apply FC on any frame. |
| */ |
| #define AFC_CFG_DEFAULT 0x00F830A1 |
| |
| #define E2P_CMD 0x30 |
| #define E2P_CMD_BUSY_ 0x80000000 |
| #define E2P_CMD_READ_ 0x00000000 |
| #define E2P_CMD_TIMEOUT_ 0x00000400 |
| #define E2P_CMD_LOADED_ 0x00000200 |
| #define E2P_CMD_ADDR_ 0x000001FF |
| |
| #define E2P_DATA 0x34 |
| |
| #define BURST_CAP 0x38 |
| |
| #define INT_EP_CTL 0x68 |
| #define INT_EP_CTL_PHY_INT_ 0x00008000 |
| |
| #define BULK_IN_DLY 0x6C |
| |
| /* MAC CSRs */ |
| #define MAC_CR 0x100 |
| #define MAC_CR_MCPAS_ 0x00080000 |
| #define MAC_CR_PRMS_ 0x00040000 |
| #define MAC_CR_HPFILT_ 0x00002000 |
| #define MAC_CR_TXEN_ 0x00000008 |
| #define MAC_CR_RXEN_ 0x00000004 |
| |
| #define ADDRH 0x104 |
| |
| #define ADDRL 0x108 |
| |
| #define MII_ADDR 0x114 |
| #define MII_WRITE_ 0x02 |
| #define MII_BUSY_ 0x01 |
| #define MII_READ_ 0x00 /* ~of MII Write bit */ |
| |
| #define MII_DATA 0x118 |
| |
| #define FLOW 0x11C |
| |
| #define VLAN1 0x120 |
| |
| #define COE_CR 0x130 |
| #define Tx_COE_EN_ 0x00010000 |
| #define Rx_COE_EN_ 0x00000001 |
| |
| /* Vendor-specific PHY Definitions */ |
| #define PHY_INT_SRC 29 |
| |
| #define PHY_INT_MASK 30 |
| #define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040) |
| #define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010) |
| #define PHY_INT_MASK_DEFAULT_ (PHY_INT_MASK_ANEG_COMP_ | \ |
| PHY_INT_MASK_LINK_DOWN_) |
| |
| /* USB Vendor Requests */ |
| #define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0 |
| #define USB_VENDOR_REQUEST_READ_REGISTER 0xA1 |
| |
| /* Some extra defines */ |
| #define HS_USB_PKT_SIZE 512 |
| #define FS_USB_PKT_SIZE 64 |
| #define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE) |
| #define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE) |
| #define DEFAULT_BULK_IN_DELAY 0x00002000 |
| #define MAX_SINGLE_PACKET_SIZE 2048 |
| #define EEPROM_MAC_OFFSET 0x01 |
| #define SMSC95XX_INTERNAL_PHY_ID 1 |
| #define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ |
| |
| /* local defines */ |
| #define SMSC95XX_BASE_NAME "sms" |
| #define USB_CTRL_SET_TIMEOUT 5000 |
| #define USB_CTRL_GET_TIMEOUT 5000 |
| #define USB_BULK_SEND_TIMEOUT 5000 |
| #define USB_BULK_RECV_TIMEOUT 5000 |
| |
| #define AX_RX_URB_SIZE 2048 |
| #define PHY_CONNECT_TIMEOUT 5000 |
| |
| #define TURBO_MODE |
| |
| /* local vars */ |
| static int curr_eth_dev; /* index for name of next device detected */ |
| |
| /* driver private */ |
| struct smsc95xx_private { |
| size_t rx_urb_size; /* maximum USB URB size */ |
| u32 mac_cr; /* MAC control register value */ |
| int have_hwaddr; /* 1 if we have a hardware MAC address */ |
| }; |
| |
| /* |
| * Smsc95xx infrastructure commands |
| */ |
| static int smsc95xx_write_reg(struct ueth_data *dev, u32 index, u32 data) |
| { |
| int len; |
| ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1); |
| |
| cpu_to_le32s(&data); |
| tmpbuf[0] = data; |
| |
| len = usb_control_msg(dev->pusb_dev, usb_sndctrlpipe(dev->pusb_dev, 0), |
| USB_VENDOR_REQUEST_WRITE_REGISTER, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 00, index, tmpbuf, sizeof(data), USB_CTRL_SET_TIMEOUT); |
| if (len != sizeof(data)) { |
| debug("smsc95xx_write_reg failed: index=%d, data=%d, len=%d", |
| index, data, len); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int smsc95xx_read_reg(struct ueth_data *dev, u32 index, u32 *data) |
| { |
| int len; |
| ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1); |
| |
| len = usb_control_msg(dev->pusb_dev, usb_rcvctrlpipe(dev->pusb_dev, 0), |
| USB_VENDOR_REQUEST_READ_REGISTER, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 00, index, tmpbuf, sizeof(data), USB_CTRL_GET_TIMEOUT); |
| *data = tmpbuf[0]; |
| if (len != sizeof(data)) { |
| debug("smsc95xx_read_reg failed: index=%d, len=%d", |
| index, len); |
| return -1; |
| } |
| |
| le32_to_cpus(data); |
| return 0; |
| } |
| |
| /* Loop until the read is completed with timeout */ |
| static int smsc95xx_phy_wait_not_busy(struct ueth_data *dev) |
| { |
| unsigned long start_time = get_timer(0); |
| u32 val; |
| |
| do { |
| smsc95xx_read_reg(dev, MII_ADDR, &val); |
| if (!(val & MII_BUSY_)) |
| return 0; |
| } while (get_timer(start_time) < 1 * 1000 * 1000); |
| |
| return -1; |
| } |
| |
| static int smsc95xx_mdio_read(struct ueth_data *dev, int phy_id, int idx) |
| { |
| u32 val, addr; |
| |
| /* confirm MII not busy */ |
| if (smsc95xx_phy_wait_not_busy(dev)) { |
| debug("MII is busy in smsc95xx_mdio_read\n"); |
| return -1; |
| } |
| |
| /* set the address, index & direction (read from PHY) */ |
| addr = (phy_id << 11) | (idx << 6) | MII_READ_; |
| smsc95xx_write_reg(dev, MII_ADDR, addr); |
| |
| if (smsc95xx_phy_wait_not_busy(dev)) { |
| debug("Timed out reading MII reg %02X\n", idx); |
| return -1; |
| } |
| |
| smsc95xx_read_reg(dev, MII_DATA, &val); |
| |
| return (u16)(val & 0xFFFF); |
| } |
| |
| static void smsc95xx_mdio_write(struct ueth_data *dev, int phy_id, int idx, |
| int regval) |
| { |
| u32 val, addr; |
| |
| /* confirm MII not busy */ |
| if (smsc95xx_phy_wait_not_busy(dev)) { |
| debug("MII is busy in smsc95xx_mdio_write\n"); |
| return; |
| } |
| |
| val = regval; |
| smsc95xx_write_reg(dev, MII_DATA, val); |
| |
| /* set the address, index & direction (write to PHY) */ |
| addr = (phy_id << 11) | (idx << 6) | MII_WRITE_; |
| smsc95xx_write_reg(dev, MII_ADDR, addr); |
| |
| if (smsc95xx_phy_wait_not_busy(dev)) |
| debug("Timed out writing MII reg %02X\n", idx); |
| } |
| |
| static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev) |
| { |
| unsigned long start_time = get_timer(0); |
| u32 val; |
| |
| do { |
| smsc95xx_read_reg(dev, E2P_CMD, &val); |
| if (!(val & E2P_CMD_LOADED_)) { |
| debug("No EEPROM present\n"); |
| return -1; |
| } |
| if (!(val & E2P_CMD_BUSY_)) |
| return 0; |
| udelay(40); |
| } while (get_timer(start_time) < 1 * 1000 * 1000); |
| |
| debug("EEPROM is busy\n"); |
| return -1; |
| } |
| |
| static int smsc95xx_wait_eeprom(struct ueth_data *dev) |
| { |
| unsigned long start_time = get_timer(0); |
| u32 val; |
| |
| do { |
| smsc95xx_read_reg(dev, E2P_CMD, &val); |
| if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_)) |
| break; |
| udelay(40); |
| } while (get_timer(start_time) < 1 * 1000 * 1000); |
| |
| if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) { |
| debug("EEPROM read operation timeout\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int smsc95xx_read_eeprom(struct ueth_data *dev, u32 offset, u32 length, |
| u8 *data) |
| { |
| u32 val; |
| int i, ret; |
| |
| ret = smsc95xx_eeprom_confirm_not_busy(dev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < length; i++) { |
| val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_); |
| smsc95xx_write_reg(dev, E2P_CMD, val); |
| |
| ret = smsc95xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| smsc95xx_read_reg(dev, E2P_DATA, &val); |
| data[i] = val & 0xFF; |
| offset++; |
| } |
| return 0; |
| } |
| |
| /* |
| * mii_nway_restart - restart NWay (autonegotiation) for this interface |
| * |
| * Returns 0 on success, negative on error. |
| */ |
| static int mii_nway_restart(struct ueth_data *dev) |
| { |
| int bmcr; |
| int r = -1; |
| |
| /* if autoneg is off, it's an error */ |
| bmcr = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMCR); |
| |
| if (bmcr & BMCR_ANENABLE) { |
| bmcr |= BMCR_ANRESTART; |
| smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr); |
| r = 0; |
| } |
| return r; |
| } |
| |
| static int smsc95xx_phy_initialize(struct ueth_data *dev) |
| { |
| smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET); |
| smsc95xx_mdio_write(dev, dev->phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | |
| ADVERTISE_PAUSE_ASYM); |
| |
| /* read to clear */ |
| smsc95xx_mdio_read(dev, dev->phy_id, PHY_INT_SRC); |
| |
| smsc95xx_mdio_write(dev, dev->phy_id, PHY_INT_MASK, |
| PHY_INT_MASK_DEFAULT_); |
| mii_nway_restart(dev); |
| |
| debug("phy initialised succesfully\n"); |
| return 0; |
| } |
| |
| static int smsc95xx_init_mac_address(struct eth_device *eth, |
| struct ueth_data *dev) |
| { |
| /* try reading mac address from EEPROM */ |
| if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, |
| eth->enetaddr) == 0) { |
| if (is_valid_ether_addr(eth->enetaddr)) { |
| /* eeprom values are valid so use them */ |
| debug("MAC address read from EEPROM\n"); |
| return 0; |
| } |
| } |
| |
| /* |
| * No eeprom, or eeprom values are invalid. Generating a random MAC |
| * address is not safe. Just return an error. |
| */ |
| return -1; |
| } |
| |
| static int smsc95xx_write_hwaddr(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| struct smsc95xx_private *priv = dev->dev_priv; |
| u32 addr_lo = __get_unaligned_le32(ð->enetaddr[0]); |
| u32 addr_hi = __get_unaligned_le16(ð->enetaddr[4]); |
| int ret; |
| |
| /* set hardware address */ |
| debug("** %s()\n", __func__); |
| ret = smsc95xx_write_reg(dev, ADDRL, addr_lo); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc95xx_write_reg(dev, ADDRH, addr_hi); |
| if (ret < 0) |
| return ret; |
| |
| debug("MAC %pM\n", eth->enetaddr); |
| priv->have_hwaddr = 1; |
| return 0; |
| } |
| |
| /* Enable or disable Tx & Rx checksum offload engines */ |
| static int smsc95xx_set_csums(struct ueth_data *dev, |
| int use_tx_csum, int use_rx_csum) |
| { |
| u32 read_buf; |
| int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf); |
| if (ret < 0) |
| return ret; |
| |
| if (use_tx_csum) |
| read_buf |= Tx_COE_EN_; |
| else |
| read_buf &= ~Tx_COE_EN_; |
| |
| if (use_rx_csum) |
| read_buf |= Rx_COE_EN_; |
| else |
| read_buf &= ~Rx_COE_EN_; |
| |
| ret = smsc95xx_write_reg(dev, COE_CR, read_buf); |
| if (ret < 0) |
| return ret; |
| |
| debug("COE_CR = 0x%08x\n", read_buf); |
| return 0; |
| } |
| |
| static void smsc95xx_set_multicast(struct ueth_data *dev) |
| { |
| struct smsc95xx_private *priv = dev->dev_priv; |
| |
| /* No multicast in u-boot */ |
| priv->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); |
| } |
| |
| /* starts the TX path */ |
| static void smsc95xx_start_tx_path(struct ueth_data *dev) |
| { |
| struct smsc95xx_private *priv = dev->dev_priv; |
| u32 reg_val; |
| |
| /* Enable Tx at MAC */ |
| priv->mac_cr |= MAC_CR_TXEN_; |
| |
| smsc95xx_write_reg(dev, MAC_CR, priv->mac_cr); |
| |
| /* Enable Tx at SCSRs */ |
| reg_val = TX_CFG_ON_; |
| smsc95xx_write_reg(dev, TX_CFG, reg_val); |
| } |
| |
| /* Starts the Receive path */ |
| static void smsc95xx_start_rx_path(struct ueth_data *dev) |
| { |
| struct smsc95xx_private *priv = dev->dev_priv; |
| |
| priv->mac_cr |= MAC_CR_RXEN_; |
| smsc95xx_write_reg(dev, MAC_CR, priv->mac_cr); |
| } |
| |
| /* |
| * Smsc95xx callbacks |
| */ |
| static int smsc95xx_init(struct eth_device *eth, bd_t *bd) |
| { |
| int ret; |
| u32 write_buf; |
| u32 read_buf; |
| u32 burst_cap; |
| int timeout; |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| struct smsc95xx_private *priv = |
| (struct smsc95xx_private *)dev->dev_priv; |
| #define TIMEOUT_RESOLUTION 50 /* ms */ |
| int link_detected; |
| |
| debug("** %s()\n", __func__); |
| dev->phy_id = SMSC95XX_INTERNAL_PHY_ID; /* fixed phy id */ |
| |
| write_buf = HW_CFG_LRST_; |
| ret = smsc95xx_write_reg(dev, HW_CFG, write_buf); |
| if (ret < 0) |
| return ret; |
| |
| timeout = 0; |
| do { |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) |
| return ret; |
| udelay(10 * 1000); |
| timeout++; |
| } while ((read_buf & HW_CFG_LRST_) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| debug("timeout waiting for completion of Lite Reset\n"); |
| return -1; |
| } |
| |
| write_buf = PM_CTL_PHY_RST_; |
| ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf); |
| if (ret < 0) |
| return ret; |
| |
| timeout = 0; |
| do { |
| ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf); |
| if (ret < 0) |
| return ret; |
| udelay(10 * 1000); |
| timeout++; |
| } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100)); |
| if (timeout >= 100) { |
| debug("timeout waiting for PHY Reset\n"); |
| return -1; |
| } |
| if (!priv->have_hwaddr && smsc95xx_init_mac_address(eth, dev) == 0) |
| priv->have_hwaddr = 1; |
| if (!priv->have_hwaddr) { |
| puts("Error: SMSC95xx: No MAC address set - set usbethaddr\n"); |
| return -1; |
| } |
| if (smsc95xx_write_hwaddr(eth) < 0) |
| return -1; |
| |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) |
| return ret; |
| debug("Read Value from HW_CFG : 0x%08x\n", read_buf); |
| |
| read_buf |= HW_CFG_BIR_; |
| ret = smsc95xx_write_reg(dev, HW_CFG, read_buf); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) |
| return ret; |
| debug("Read Value from HW_CFG after writing " |
| "HW_CFG_BIR_: 0x%08x\n", read_buf); |
| |
| #ifdef TURBO_MODE |
| if (dev->pusb_dev->speed == USB_SPEED_HIGH) { |
| burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; |
| priv->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; |
| } else { |
| burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; |
| priv->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; |
| } |
| #else |
| burst_cap = 0; |
| priv->rx_urb_size = MAX_SINGLE_PACKET_SIZE; |
| #endif |
| debug("rx_urb_size=%ld\n", (ulong)priv->rx_urb_size); |
| |
| ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf); |
| if (ret < 0) |
| return ret; |
| debug("Read Value from BURST_CAP after writing: 0x%08x\n", read_buf); |
| |
| read_buf = DEFAULT_BULK_IN_DELAY; |
| ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf); |
| if (ret < 0) |
| return ret; |
| debug("Read Value from BULK_IN_DLY after writing: " |
| "0x%08x\n", read_buf); |
| |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) |
| return ret; |
| debug("Read Value from HW_CFG: 0x%08x\n", read_buf); |
| |
| #ifdef TURBO_MODE |
| read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_); |
| #endif |
| read_buf &= ~HW_CFG_RXDOFF_; |
| |
| #define NET_IP_ALIGN 0 |
| read_buf |= NET_IP_ALIGN << 9; |
| |
| ret = smsc95xx_write_reg(dev, HW_CFG, read_buf); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); |
| if (ret < 0) |
| return ret; |
| debug("Read Value from HW_CFG after writing: 0x%08x\n", read_buf); |
| |
| write_buf = 0xFFFFFFFF; |
| ret = smsc95xx_write_reg(dev, INT_STS, write_buf); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc95xx_read_reg(dev, ID_REV, &read_buf); |
| if (ret < 0) |
| return ret; |
| debug("ID_REV = 0x%08x\n", read_buf); |
| |
| /* Init Tx */ |
| write_buf = 0; |
| ret = smsc95xx_write_reg(dev, FLOW, write_buf); |
| if (ret < 0) |
| return ret; |
| |
| read_buf = AFC_CFG_DEFAULT; |
| ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc95xx_read_reg(dev, MAC_CR, &priv->mac_cr); |
| if (ret < 0) |
| return ret; |
| |
| /* Init Rx. Set Vlan */ |
| write_buf = (u32)ETH_P_8021Q; |
| ret = smsc95xx_write_reg(dev, VLAN1, write_buf); |
| if (ret < 0) |
| return ret; |
| |
| /* Disable checksum offload engines */ |
| ret = smsc95xx_set_csums(dev, 0, 0); |
| if (ret < 0) { |
| debug("Failed to set csum offload: %d\n", ret); |
| return ret; |
| } |
| smsc95xx_set_multicast(dev); |
| |
| if (smsc95xx_phy_initialize(dev) < 0) |
| return -1; |
| ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf); |
| if (ret < 0) |
| return ret; |
| |
| /* enable PHY interrupts */ |
| read_buf |= INT_EP_CTL_PHY_INT_; |
| |
| ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf); |
| if (ret < 0) |
| return ret; |
| |
| smsc95xx_start_tx_path(dev); |
| smsc95xx_start_rx_path(dev); |
| |
| timeout = 0; |
| do { |
| link_detected = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMSR) |
| & BMSR_LSTATUS; |
| if (!link_detected) { |
| if (timeout == 0) |
| printf("Waiting for Ethernet connection... "); |
| udelay(TIMEOUT_RESOLUTION * 1000); |
| timeout += TIMEOUT_RESOLUTION; |
| } |
| } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT); |
| if (link_detected) { |
| if (timeout != 0) |
| printf("done.\n"); |
| } else { |
| printf("unable to connect.\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int smsc95xx_send(struct eth_device *eth, void* packet, int length) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| int err; |
| int actual_len; |
| u32 tx_cmd_a; |
| u32 tx_cmd_b; |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg, |
| PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)); |
| |
| debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); |
| if (length > PKTSIZE) |
| return -1; |
| |
| tx_cmd_a = (u32)length | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; |
| tx_cmd_b = (u32)length; |
| cpu_to_le32s(&tx_cmd_a); |
| cpu_to_le32s(&tx_cmd_b); |
| |
| /* prepend cmd_a and cmd_b */ |
| memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a)); |
| memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b)); |
| memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet, |
| length); |
| err = usb_bulk_msg(dev->pusb_dev, |
| usb_sndbulkpipe(dev->pusb_dev, dev->ep_out), |
| (void *)msg, |
| length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), |
| &actual_len, |
| USB_BULK_SEND_TIMEOUT); |
| debug("Tx: len = %u, actual = %u, err = %d\n", |
| length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), |
| actual_len, err); |
| return err; |
| } |
| |
| static int smsc95xx_recv(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| DEFINE_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE); |
| unsigned char *buf_ptr; |
| int err; |
| int actual_len; |
| u32 packet_len; |
| int cur_buf_align; |
| |
| debug("** %s()\n", __func__); |
| err = usb_bulk_msg(dev->pusb_dev, |
| usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in), |
| (void *)recv_buf, |
| AX_RX_URB_SIZE, |
| &actual_len, |
| USB_BULK_RECV_TIMEOUT); |
| debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE, |
| actual_len, err); |
| if (err != 0) { |
| debug("Rx: failed to receive\n"); |
| return -1; |
| } |
| if (actual_len > AX_RX_URB_SIZE) { |
| debug("Rx: received too many bytes %d\n", actual_len); |
| return -1; |
| } |
| |
| buf_ptr = recv_buf; |
| while (actual_len > 0) { |
| /* |
| * 1st 4 bytes contain the length of the actual data plus error |
| * info. Extract data length. |
| */ |
| if (actual_len < sizeof(packet_len)) { |
| debug("Rx: incomplete packet length\n"); |
| return -1; |
| } |
| memcpy(&packet_len, buf_ptr, sizeof(packet_len)); |
| le32_to_cpus(&packet_len); |
| if (packet_len & RX_STS_ES_) { |
| debug("Rx: Error header=%#x", packet_len); |
| return -1; |
| } |
| packet_len = ((packet_len & RX_STS_FL_) >> 16); |
| |
| if (packet_len > actual_len - sizeof(packet_len)) { |
| debug("Rx: too large packet: %d\n", packet_len); |
| return -1; |
| } |
| |
| /* Notify net stack */ |
| NetReceive(buf_ptr + sizeof(packet_len), packet_len - 4); |
| |
| /* Adjust for next iteration */ |
| actual_len -= sizeof(packet_len) + packet_len; |
| buf_ptr += sizeof(packet_len) + packet_len; |
| cur_buf_align = (int)buf_ptr - (int)recv_buf; |
| |
| if (cur_buf_align & 0x03) { |
| int align = 4 - (cur_buf_align & 0x03); |
| |
| actual_len -= align; |
| buf_ptr += align; |
| } |
| } |
| return err; |
| } |
| |
| static void smsc95xx_halt(struct eth_device *eth) |
| { |
| debug("** %s()\n", __func__); |
| } |
| |
| /* |
| * SMSC probing functions |
| */ |
| void smsc95xx_eth_before_probe(void) |
| { |
| curr_eth_dev = 0; |
| } |
| |
| struct smsc95xx_dongle { |
| unsigned short vendor; |
| unsigned short product; |
| }; |
| |
| static const struct smsc95xx_dongle smsc95xx_dongles[] = { |
| { 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */ |
| { 0x0424, 0x9500 }, /* LAN9500 Ethernet */ |
| { 0x0000, 0x0000 } /* END - Do not remove */ |
| }; |
| |
| /* Probe to see if a new device is actually an SMSC device */ |
| int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, |
| struct ueth_data *ss) |
| { |
| struct usb_interface *iface; |
| struct usb_interface_descriptor *iface_desc; |
| int i; |
| |
| /* let's examine the device now */ |
| iface = &dev->config.if_desc[ifnum]; |
| iface_desc = &dev->config.if_desc[ifnum].desc; |
| |
| for (i = 0; smsc95xx_dongles[i].vendor != 0; i++) { |
| if (dev->descriptor.idVendor == smsc95xx_dongles[i].vendor && |
| dev->descriptor.idProduct == smsc95xx_dongles[i].product) |
| /* Found a supported dongle */ |
| break; |
| } |
| if (smsc95xx_dongles[i].vendor == 0) |
| return 0; |
| |
| /* At this point, we know we've got a live one */ |
| debug("\n\nUSB Ethernet device detected\n"); |
| memset(ss, '\0', sizeof(struct ueth_data)); |
| |
| /* Initialize the ueth_data structure with some useful info */ |
| ss->ifnum = ifnum; |
| ss->pusb_dev = dev; |
| ss->subclass = iface_desc->bInterfaceSubClass; |
| ss->protocol = iface_desc->bInterfaceProtocol; |
| |
| /* |
| * We are expecting a minimum of 3 endpoints - in, out (bulk), and int. |
| * We will ignore any others. |
| */ |
| for (i = 0; i < iface_desc->bNumEndpoints; i++) { |
| /* is it an BULK endpoint? */ |
| if ((iface->ep_desc[i].bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { |
| if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN) |
| ss->ep_in = |
| iface->ep_desc[i].bEndpointAddress & |
| USB_ENDPOINT_NUMBER_MASK; |
| else |
| ss->ep_out = |
| iface->ep_desc[i].bEndpointAddress & |
| USB_ENDPOINT_NUMBER_MASK; |
| } |
| |
| /* is it an interrupt endpoint? */ |
| if ((iface->ep_desc[i].bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { |
| ss->ep_int = iface->ep_desc[i].bEndpointAddress & |
| USB_ENDPOINT_NUMBER_MASK; |
| ss->irqinterval = iface->ep_desc[i].bInterval; |
| } |
| } |
| debug("Endpoints In %d Out %d Int %d\n", |
| ss->ep_in, ss->ep_out, ss->ep_int); |
| |
| /* Do some basic sanity checks, and bail if we find a problem */ |
| if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) || |
| !ss->ep_in || !ss->ep_out || !ss->ep_int) { |
| debug("Problems with device\n"); |
| return 0; |
| } |
| dev->privptr = (void *)ss; |
| |
| /* alloc driver private */ |
| ss->dev_priv = calloc(1, sizeof(struct smsc95xx_private)); |
| if (!ss->dev_priv) |
| return 0; |
| |
| return 1; |
| } |
| |
| int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss, |
| struct eth_device *eth) |
| { |
| debug("** %s()\n", __func__); |
| if (!eth) { |
| debug("%s: missing parameter.\n", __func__); |
| return 0; |
| } |
| sprintf(eth->name, "%s%d", SMSC95XX_BASE_NAME, curr_eth_dev++); |
| eth->init = smsc95xx_init; |
| eth->send = smsc95xx_send; |
| eth->recv = smsc95xx_recv; |
| eth->halt = smsc95xx_halt; |
| eth->write_hwaddr = smsc95xx_write_hwaddr; |
| eth->priv = ss; |
| return 1; |
| } |