| /* |
| * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * PCI Configuration space access support |
| */ |
| #include <common.h> |
| #include <pci.h> |
| #include <asm/io.h> |
| #include <asm/immap.h> |
| |
| #if defined(CONFIG_PCI) |
| /* System RAM mapped over PCI */ |
| #define CONFIG_SYS_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) |
| |
| #define cfg_read(val, addr, type, op) *val = op((type)(addr)); |
| #define cfg_write(val, addr, type, op) op((type *)(addr), (val)); |
| |
| #define PCI_OP(rw, size, type, op, mask) \ |
| int pci_##rw##_cfg_##size(struct pci_controller *hose, \ |
| pci_dev_t dev, int offset, type val) \ |
| { \ |
| u32 addr = 0; \ |
| u16 cfg_type = 0; \ |
| addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \ |
| out_be32(hose->cfg_addr, addr); \ |
| cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ |
| __asm__ __volatile__("nop"); \ |
| __asm__ __volatile__("nop"); \ |
| out_be32(hose->cfg_addr, addr & 0x7fffffff); \ |
| return 0; \ |
| } |
| |
| PCI_OP(read, byte, u8 *, in_8, 3) |
| PCI_OP(read, word, u16 *, in_le16, 2) |
| PCI_OP(write, byte, u8, out_8, 3) |
| PCI_OP(write, word, u16, out_le16, 2) |
| PCI_OP(write, dword, u32, out_le32, 0) |
| |
| int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev, |
| int offset, u32 * val) |
| { |
| u32 addr; |
| u32 tmpv; |
| u32 mask = 2; /* word access */ |
| /* Read lower 16 bits */ |
| addr = ((offset & 0xfc) | (dev) | 0x80000000); |
| out_be32(hose->cfg_addr, addr); |
| *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); |
| __asm__ __volatile__("nop"); |
| out_be32(hose->cfg_addr, addr & 0x7fffffff); |
| |
| /* Read upper 16 bits */ |
| offset += 2; |
| addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000); |
| out_be32(hose->cfg_addr, addr); |
| tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); |
| __asm__ __volatile__("nop"); |
| out_be32(hose->cfg_addr, addr & 0x7fffffff); |
| |
| /* combine results into dword value */ |
| *val = (tmpv << 16) | *val; |
| |
| return 0; |
| } |
| |
| void pci_mcf547x_8x_init(struct pci_controller *hose) |
| { |
| pci_t *pci = (pci_t *) MMAP_PCI; |
| gpio_t *gpio = (gpio_t *) MMAP_GPIO; |
| |
| /* Port configuration */ |
| out_be16(&gpio->par_pcibg, |
| GPIO_PAR_PCIBG_PCIBG0(3) | GPIO_PAR_PCIBG_PCIBG1(3) | |
| GPIO_PAR_PCIBG_PCIBG2(3) | GPIO_PAR_PCIBG_PCIBG3(3) | |
| GPIO_PAR_PCIBG_PCIBG4(3)); |
| out_be16(&gpio->par_pcibr, |
| GPIO_PAR_PCIBR_PCIBR0(3) | GPIO_PAR_PCIBR_PCIBR1(3) | |
| GPIO_PAR_PCIBR_PCIBR2(3) | GPIO_PAR_PCIBR_PCIBR3(3) | |
| GPIO_PAR_PCIBR_PCIBR4(3)); |
| |
| /* Assert reset bit */ |
| setbits_be32(&pci->gscr, PCI_GSCR_PR); |
| |
| out_be32(&pci->tcr1, PCI_TCR1_P); |
| |
| /* Initiator windows */ |
| out_be32(&pci->iw0btar, |
| CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16)); |
| out_be32(&pci->iw1btar, |
| CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16)); |
| out_be32(&pci->iw2btar, |
| CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16)); |
| |
| out_be32(&pci->iwcr, |
| PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO | |
| PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO); |
| |
| out_be32(&pci->icr, 0); |
| |
| /* Enable bus master and mem access */ |
| out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M); |
| |
| /* Cache line size and master latency */ |
| out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xf8)); |
| out_be32(&pci->cr2, 0); |
| |
| #ifdef CONFIG_SYS_PCI_BAR0 |
| out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0)); |
| out_be32(&pci->tbatr0a, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN); |
| #endif |
| #ifdef CONFIG_SYS_PCI_BAR1 |
| out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1)); |
| out_be32(&pci->tbatr1a, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN); |
| #endif |
| |
| /* Deassert reset bit */ |
| clrbits_be32(&pci->gscr, PCI_GSCR_PR); |
| udelay(1000); |
| |
| /* Enable PCI bus master support */ |
| hose->first_busno = 0; |
| hose->last_busno = 0xff; |
| |
| pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS, |
| CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM); |
| |
| pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS, |
| CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); |
| |
| pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS, |
| CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE, |
| PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); |
| |
| hose->region_count = 3; |
| |
| hose->cfg_addr = &(pci->car); |
| hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS; |
| |
| pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word, |
| pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word, |
| pci_write_cfg_dword); |
| |
| /* Hose scan */ |
| pci_register_hose(hose); |
| hose->last_busno = pci_hose_scan(hose); |
| } |
| #endif /* CONFIG_PCI */ |