| /* |
| * |
| * (C) Copyright 2000-2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2007, 2012 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <MCD_dma.h> |
| #include <asm/immap.h> |
| #include <asm/io.h> |
| |
| #if defined(CONFIG_CMD_NET) |
| #include <config.h> |
| #include <net.h> |
| #include <asm/fsl_mcdmafec.h> |
| #endif |
| |
| /* |
| * Breath some life into the CPU... |
| * |
| * Set up the memory map, |
| * initialize a bunch of registers, |
| * initialize the UPM's |
| */ |
| void cpu_init_f(void) |
| { |
| gpio_t *gpio = (gpio_t *) MMAP_GPIO; |
| fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; |
| xlbarb_t *xlbarb = (xlbarb_t *) MMAP_XARB; |
| |
| out_be32(&xlbarb->adrto, 0x2000); |
| out_be32(&xlbarb->datto, 0x2500); |
| out_be32(&xlbarb->busto, 0x3000); |
| |
| out_be32(&xlbarb->cfg, XARB_CFG_AT | XARB_CFG_DT); |
| |
| /* Master Priority Enable */ |
| out_be32(&xlbarb->prien, 0xff); |
| out_be32(&xlbarb->pri, 0); |
| |
| #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) |
| out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); |
| out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); |
| out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL)) |
| out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); |
| out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); |
| out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL)) |
| out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); |
| out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); |
| out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL)) |
| out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); |
| out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); |
| out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL)) |
| out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE); |
| out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL); |
| out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK); |
| #endif |
| |
| #if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL)) |
| out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE); |
| out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL); |
| out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK); |
| #endif |
| |
| #ifdef CONFIG_FSL_I2C |
| out_be16(&gpio->par_feci2cirq, |
| GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA); |
| #endif |
| |
| icache_enable(); |
| } |
| |
| /* |
| * initialize higher level parts of CPU like timers |
| */ |
| int cpu_init_r(void) |
| { |
| #if defined(CONFIG_CMD_NET) && defined(CONFIG_FSLDMAFEC) |
| MCD_initDma((dmaRegs *) (MMAP_MCDMA), (void *)(MMAP_SRAM + 512), |
| MCD_RELOC_TASKS); |
| #endif |
| return (0); |
| } |
| |
| void uart_port_conf(int port) |
| { |
| gpio_t *gpio = (gpio_t *) MMAP_GPIO; |
| u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40); |
| |
| /* Setup Ports: */ |
| switch (port) { |
| case 0: |
| out_8(&gpio->par_psc0, GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0); |
| break; |
| case 1: |
| out_8(&gpio->par_psc1, GPIO_PAR_PSC1_TXD1 | GPIO_PAR_PSC1_RXD1); |
| break; |
| case 2: |
| out_8(&gpio->par_psc2, GPIO_PAR_PSC2_TXD2 | GPIO_PAR_PSC2_RXD2); |
| break; |
| case 3: |
| out_8(&gpio->par_psc3, GPIO_PAR_PSC3_TXD3 | GPIO_PAR_PSC3_RXD3); |
| break; |
| } |
| |
| clrbits_8(pscsicr, 0x07); |
| } |
| |
| #if defined(CONFIG_CMD_NET) |
| int fecpin_setclear(struct eth_device *dev, int setclear) |
| { |
| gpio_t *gpio = (gpio_t *) MMAP_GPIO; |
| struct fec_info_dma *info = (struct fec_info_dma *)dev->priv; |
| |
| if (setclear) { |
| if (info->iobase == CONFIG_SYS_FEC0_IOBASE) |
| setbits_be16(&gpio->par_feci2cirq, 0xf000); |
| else |
| setbits_be16(&gpio->par_feci2cirq, 0x0fc0); |
| } else { |
| if (info->iobase == CONFIG_SYS_FEC0_IOBASE) |
| clrbits_be16(&gpio->par_feci2cirq, 0xf000); |
| else |
| clrbits_be16(&gpio->par_feci2cirq, 0x0fc0); |
| } |
| return 0; |
| } |
| #endif |