board/samsung/smdk5250/smdk5250.c - uboot/armada - Git at Google

 /*
  * Copyright (C) 2012 Samsung Electronics
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <fdtdec.h>
 #include <asm/io.h>
 #include <i2c.h>
 #include <lcd.h>
 #include <netdev.h>
 #include <spi.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/power.h>
 #include <asm/arch/sromc.h>
 #include <asm/arch/dp_info.h>
 #include <power/pmic.h>

 DECLARE_GLOBAL_DATA_PTR;

 #ifdef CONFIG_USB_EHCI_EXYNOS
 int board_usb_vbus_init(void)
 {
 	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
 						samsung_get_base_gpio_part1();

 	/* Enable VBUS power switch */
 	s5p_gpio_direction_output(&gpio1->x2, 6, 1);

 	/* VBUS turn ON time */
 	mdelay(3);

 	return 0;
 }
 #endif

 int board_init(void)
 {
 	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 #ifdef CONFIG_EXYNOS_SPI
 	spi_init();
 #endif
 #ifdef CONFIG_USB_EHCI_EXYNOS
 	board_usb_vbus_init();
 #endif
 	return 0;
 }

 int dram_init(void)
 {
 	gd->ram_size	= get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
 			+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
 			+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
 			+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
 			+ get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
 			+ get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
 			+ get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
 			+ get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
 	return 0;
 }

 #if defined(CONFIG_POWER)
 int power_init_board(void)
 {
 	if (pmic_init(I2C_PMIC))
 		return -1;
 	else
 		return 0;
 }
 #endif

 void dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
 							PHYS_SDRAM_1_SIZE);
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 	gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
 							PHYS_SDRAM_2_SIZE);
 	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
 	gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
 							PHYS_SDRAM_3_SIZE);
 	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
 	gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
 							PHYS_SDRAM_4_SIZE);
 	gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
 	gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
 							PHYS_SDRAM_5_SIZE);
 	gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
 	gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
 							PHYS_SDRAM_6_SIZE);
 	gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
 	gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
 							PHYS_SDRAM_7_SIZE);
 	gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
 	gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
 							PHYS_SDRAM_8_SIZE);
 }

 #ifdef CONFIG_OF_CONTROL
 static int decode_sromc(const void *blob, struct fdt_sromc *config)
 {
 	int err;
 	int node;

 	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
 	if (node < 0) {
 		debug("Could not find SROMC node\n");
 		return node;
 	}

 	config->bank = fdtdec_get_int(blob, node, "bank", 0);
 	config->width = fdtdec_get_int(blob, node, "width", 2);

 	err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
 			FDT_SROM_TIMING_COUNT);
 	if (err < 0) {
 		debug("Could not decode SROMC configuration\n");
 		return -FDT_ERR_NOTFOUND;
 	}

 	return 0;
 }
 #endif

 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_SMC911X
 	u32 smc_bw_conf, smc_bc_conf;
 	struct fdt_sromc config;
 	fdt_addr_t base_addr;
 	int node;

 #ifdef CONFIG_OF_CONTROL
 	node = decode_sromc(gd->fdt_blob, &config);
 	if (node < 0) {
 		debug("%s: Could not find sromc configuration\n", __func__);
 		return 0;
 	}
 	node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
 	if (node < 0) {
 		debug("%s: Could not find lan9215 configuration\n", __func__);
 		return 0;
 	}

 	/* We now have a node, so any problems from now on are errors */
 	base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
 	if (base_addr == FDT_ADDR_T_NONE) {
 		debug("%s: Could not find lan9215 address\n", __func__);
 		return -1;
 	}
 #else
 	/* Non-FDT configuration - bank number and timing parameters*/
 	config.bank = CONFIG_ENV_SROM_BANK;
 	config.width = 2;

 	config.timing[FDT_SROM_TACS] = 0x01;
 	config.timing[FDT_SROM_TCOS] = 0x01;
 	config.timing[FDT_SROM_TACC] = 0x06;
 	config.timing[FDT_SROM_TCOH] = 0x01;
 	config.timing[FDT_SROM_TAH] = 0x0C;
 	config.timing[FDT_SROM_TACP] = 0x09;
 	config.timing[FDT_SROM_PMC] = 0x01;
 	base_addr = CONFIG_SMC911X_BASE;
 #endif

 	/* Ethernet needs data bus width of 16 bits */
 	if (config.width != 2) {
 		debug("%s: Unsupported bus width %d\n", __func__,
 			config.width);
 		return -1;
 	}
 	smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
 			| SROMC_BYTE_ENABLE(config.bank);

 	smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS])   |\
 			SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |\
 			SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |\
 			SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |\
 			SROMC_BC_TAH(config.timing[FDT_SROM_TAH])   |\
 			SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |\
 			SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);

 	/* Select and configure the SROMC bank */
 	exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
 	s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
 	return smc911x_initialize(0, base_addr);
 #endif
 	return 0;
 }

 #ifdef CONFIG_DISPLAY_BOARDINFO
 int checkboard(void)
 {
 	printf("\nBoard: SMDK5250\n");

 	return 0;
 }
 #endif

 #ifdef CONFIG_GENERIC_MMC
 int board_mmc_init(bd_t *bis)
 {
 	int err;

 	err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
 	if (err) {
 		debug("SDMMC0 not configured\n");
 		return err;
 	}

 	err = s5p_mmc_init(0, 8);
 	return err;
 }
 #endif

 static int board_uart_init(void)
 {
 	int err;

 	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
 	if (err) {
 		debug("UART0 not configured\n");
 		return err;
 	}

 	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
 	if (err) {
 		debug("UART1 not configured\n");
 		return err;
 	}

 	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
 	if (err) {
 		debug("UART2 not configured\n");
 		return err;
 	}

 	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
 	if (err) {
 		debug("UART3 not configured\n");
 		return err;
 	}

 	return 0;
 }

 #ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_early_init_f(void)
 {
 	int err;
 	err = board_uart_init();
 	if (err) {
 		debug("UART init failed\n");
 		return err;
 	}
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
 	board_i2c_init(gd->fdt_blob);
 #endif
 	return err;
 }
 #endif

 #ifdef CONFIG_LCD
 void cfg_lcd_gpio(void)
 {
 	struct exynos5_gpio_part1 *gpio1 =
 		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();

 	/* For Backlight */
 	s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
 	s5p_gpio_set_value(&gpio1->b2, 0, 1);

 	/* LCD power on */
 	s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
 	s5p_gpio_set_value(&gpio1->x1, 5, 1);

 	/* Set Hotplug detect for DP */
 	s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
 }

 vidinfo_t panel_info = {
 	.vl_freq	= 60,
 	.vl_col		= 2560,
 	.vl_row		= 1600,
 	.vl_width	= 2560,
 	.vl_height	= 1600,
 	.vl_clkp	= CONFIG_SYS_LOW,
 	.vl_hsp		= CONFIG_SYS_LOW,
 	.vl_vsp		= CONFIG_SYS_LOW,
 	.vl_dp		= CONFIG_SYS_LOW,
 	.vl_bpix	= 4,	/* LCD_BPP = 2^4, for output conosle on LCD */

 	/* wDP panel timing infomation */
 	.vl_hspw	= 32,
 	.vl_hbpd	= 80,
 	.vl_hfpd	= 48,

 	.vl_vspw	= 6,
 	.vl_vbpd	= 37,
 	.vl_vfpd	= 3,
 	.vl_cmd_allow_len = 0xf,

 	.win_id		= 3,
 	.cfg_gpio	= cfg_lcd_gpio,
 	.backlight_on	= NULL,
 	.lcd_power_on	= NULL,
 	.reset_lcd	= NULL,
 	.dual_lcd_enabled = 0,

 	.init_delay	= 0,
 	.power_on_delay = 0,
 	.reset_delay	= 0,
 	.interface_mode = FIMD_RGB_INTERFACE,
 	.dp_enabled	= 1,
 };

 static struct edp_device_info edp_info = {
 	.disp_info = {
 		.h_res = 2560,
 		.h_sync_width = 32,
 		.h_back_porch = 80,
 		.h_front_porch = 48,
 		.v_res = 1600,
 		.v_sync_width  = 6,
 		.v_back_porch = 37,
 		.v_front_porch = 3,
 		.v_sync_rate = 60,
 	},
 	.lt_info = {
 		.lt_status = DP_LT_NONE,
 	},
 	.video_info = {
 		.master_mode = 0,
 		.bist_mode = DP_DISABLE,
 		.bist_pattern = NO_PATTERN,
 		.h_sync_polarity = 0,
 		.v_sync_polarity = 0,
 		.interlaced = 0,
 		.color_space = COLOR_RGB,
 		.dynamic_range = VESA,
 		.ycbcr_coeff = COLOR_YCBCR601,
 		.color_depth = COLOR_8,
 	},
 };

 static struct exynos_dp_platform_data dp_platform_data = {
 	.phy_enable	= set_dp_phy_ctrl,
 	.edp_dev_info	= &edp_info,
 };

 void init_panel_info(vidinfo_t *vid)
 {
 	vid->rgb_mode   = MODE_RGB_P,

 	exynos_set_dp_platform_data(&dp_platform_data);
 }
 #endif
	/*
	* Copyright (C) 2012 Samsung Electronics
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <fdtdec.h>
	#include <asm/io.h>
	#include <i2c.h>
	#include <lcd.h>
	#include <netdev.h>
	#include <spi.h>
	#include <asm/arch/cpu.h>
	#include <asm/arch/gpio.h>
	#include <asm/arch/mmc.h>
	#include <asm/arch/pinmux.h>
	#include <asm/arch/power.h>
	#include <asm/arch/sromc.h>
	#include <asm/arch/dp_info.h>
	#include <power/pmic.h>

	DECLARE_GLOBAL_DATA_PTR;

	#ifdef CONFIG_USB_EHCI_EXYNOS
	int board_usb_vbus_init(void)
	{
	struct exynos5_gpio_part1 gpio1 = (struct exynos5_gpio_part1 )
	samsung_get_base_gpio_part1();

	/* Enable VBUS power switch */
	s5p_gpio_direction_output(&gpio1->x2, 6, 1);

	/* VBUS turn ON time */
	mdelay(3);

	return 0;
	}
	#endif

	int board_init(void)
	{
	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
	#ifdef CONFIG_EXYNOS_SPI
	spi_init();
	#endif
	#ifdef CONFIG_USB_EHCI_EXYNOS
	board_usb_vbus_init();
	#endif
	return 0;
	}

	int dram_init(void)
	{
	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
	+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
	+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
	+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
	+ get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
	+ get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
	+ get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
	+ get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
	return 0;
	}

	#if defined(CONFIG_POWER)
	int power_init_board(void)
	{
	if (pmic_init(I2C_PMIC))
	return -1;
	else
	return 0;
	}
	#endif

	void dram_init_banksize(void)
	{
	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
	PHYS_SDRAM_1_SIZE);
	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
	gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
	PHYS_SDRAM_2_SIZE);
	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
	gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
	PHYS_SDRAM_3_SIZE);
	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
	gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
	PHYS_SDRAM_4_SIZE);
	gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
	gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
	PHYS_SDRAM_5_SIZE);
	gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
	gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
	PHYS_SDRAM_6_SIZE);
	gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
	gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
	PHYS_SDRAM_7_SIZE);
	gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
	gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
	PHYS_SDRAM_8_SIZE);
	}

	#ifdef CONFIG_OF_CONTROL
	static int decode_sromc(const void blob, struct fdt_sromc config)
	{
	int err;
	int node;

	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
	if (node < 0) {
	debug("Could not find SROMC node\n");
	return node;
	}

	config->bank = fdtdec_get_int(blob, node, "bank", 0);
	config->width = fdtdec_get_int(blob, node, "width", 2);

	err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
	FDT_SROM_TIMING_COUNT);
	if (err < 0) {
	debug("Could not decode SROMC configuration\n");
	return -FDT_ERR_NOTFOUND;
	}

	return 0;
	}
	#endif

	int board_eth_init(bd_t *bis)
	{
	#ifdef CONFIG_SMC911X
	u32 smc_bw_conf, smc_bc_conf;
	struct fdt_sromc config;
	fdt_addr_t base_addr;
	int node;

	#ifdef CONFIG_OF_CONTROL
	node = decode_sromc(gd->fdt_blob, &config);
	if (node < 0) {
	debug("%s: Could not find sromc configuration\n", __func__);
	return 0;
	}
	node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
	if (node < 0) {
	debug("%s: Could not find lan9215 configuration\n", __func__);
	return 0;
	}

	/* We now have a node, so any problems from now on are errors */
	base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
	if (base_addr == FDT_ADDR_T_NONE) {
	debug("%s: Could not find lan9215 address\n", __func__);
	return -1;
	}
	#else
	/* Non-FDT configuration - bank number and timing parameters*/
	config.bank = CONFIG_ENV_SROM_BANK;
	config.width = 2;

	config.timing[FDT_SROM_TACS] = 0x01;
	config.timing[FDT_SROM_TCOS] = 0x01;
	config.timing[FDT_SROM_TACC] = 0x06;
	config.timing[FDT_SROM_TCOH] = 0x01;
	config.timing[FDT_SROM_TAH] = 0x0C;
	config.timing[FDT_SROM_TACP] = 0x09;
	config.timing[FDT_SROM_PMC] = 0x01;
	base_addr = CONFIG_SMC911X_BASE;
	#endif

	/* Ethernet needs data bus width of 16 bits */
	if (config.width != 2) {
	debug("%s: Unsupported bus width %d\n", __func__,
	config.width);
	return -1;
	}
	smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
	\| SROMC_BYTE_ENABLE(config.bank);

	smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) \|\
	SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) \|\
	SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) \|\
	SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) \|\
	SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) \|\
	SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) \|\
	SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);

	/* Select and configure the SROMC bank */
	exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
	s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
	return smc911x_initialize(0, base_addr);
	#endif
	return 0;
	}

	#ifdef CONFIG_DISPLAY_BOARDINFO
	int checkboard(void)
	{
	printf("\nBoard: SMDK5250\n");

	return 0;
	}
	#endif

	#ifdef CONFIG_GENERIC_MMC
	int board_mmc_init(bd_t *bis)
	{
	int err;

	err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
	if (err) {
	debug("SDMMC0 not configured\n");
	return err;
	}

	err = s5p_mmc_init(0, 8);
	return err;
	}
	#endif

	static int board_uart_init(void)
	{
	int err;

	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
	if (err) {
	debug("UART0 not configured\n");
	return err;
	}

	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
	if (err) {
	debug("UART1 not configured\n");
	return err;
	}

	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
	if (err) {
	debug("UART2 not configured\n");
	return err;
	}

	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
	if (err) {
	debug("UART3 not configured\n");
	return err;
	}

	return 0;
	}

	#ifdef CONFIG_BOARD_EARLY_INIT_F
	int board_early_init_f(void)
	{
	int err;
	err = board_uart_init();
	if (err) {
	debug("UART init failed\n");
	return err;
	}
	#ifdef CONFIG_SYS_I2C_INIT_BOARD
	board_i2c_init(gd->fdt_blob);
	#endif
	return err;
	}
	#endif

	#ifdef CONFIG_LCD
	void cfg_lcd_gpio(void)
	{
	struct exynos5_gpio_part1 *gpio1 =
	(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();

	/* For Backlight */
	s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
	s5p_gpio_set_value(&gpio1->b2, 0, 1);

	/* LCD power on */
	s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
	s5p_gpio_set_value(&gpio1->x1, 5, 1);

	/* Set Hotplug detect for DP */
	s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
	}

	vidinfo_t panel_info = {
	.vl_freq = 60,
	.vl_col = 2560,
	.vl_row = 1600,
	.vl_width = 2560,
	.vl_height = 1600,
	.vl_clkp = CONFIG_SYS_LOW,
	.vl_hsp = CONFIG_SYS_LOW,
	.vl_vsp = CONFIG_SYS_LOW,
	.vl_dp = CONFIG_SYS_LOW,
	.vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */

	/* wDP panel timing infomation */
	.vl_hspw = 32,
	.vl_hbpd = 80,
	.vl_hfpd = 48,

	.vl_vspw = 6,
	.vl_vbpd = 37,
	.vl_vfpd = 3,
	.vl_cmd_allow_len = 0xf,

	.win_id = 3,
	.cfg_gpio = cfg_lcd_gpio,
	.backlight_on = NULL,
	.lcd_power_on = NULL,
	.reset_lcd = NULL,
	.dual_lcd_enabled = 0,

	.init_delay = 0,
	.power_on_delay = 0,
	.reset_delay = 0,
	.interface_mode = FIMD_RGB_INTERFACE,
	.dp_enabled = 1,
	};

	static struct edp_device_info edp_info = {
	.disp_info = {
	.h_res = 2560,
	.h_sync_width = 32,
	.h_back_porch = 80,
	.h_front_porch = 48,
	.v_res = 1600,
	.v_sync_width = 6,
	.v_back_porch = 37,
	.v_front_porch = 3,
	.v_sync_rate = 60,
	},
	.lt_info = {
	.lt_status = DP_LT_NONE,
	},
	.video_info = {
	.master_mode = 0,
	.bist_mode = DP_DISABLE,
	.bist_pattern = NO_PATTERN,
	.h_sync_polarity = 0,
	.v_sync_polarity = 0,
	.interlaced = 0,
	.color_space = COLOR_RGB,
	.dynamic_range = VESA,
	.ycbcr_coeff = COLOR_YCBCR601,
	.color_depth = COLOR_8,
	},
	};

	static struct exynos_dp_platform_data dp_platform_data = {
	.phy_enable = set_dp_phy_ctrl,
	.edp_dev_info = &edp_info,
	};

	void init_panel_info(vidinfo_t *vid)
	{
	vid->rgb_mode = MODE_RGB_P,

	exynos_set_dp_platform_data(&dp_platform_data);
	}
	#endif