| /* |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| * |
| * Derived from drivers/spi/mpc8xxx_spi.c |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| #include <common.h> |
| #if defined(CONFIG_CMD_SPI) || defined(CONFIG_CMD_SF) |
| #include <malloc.h> |
| #include <spi.h> |
| #include "mvSysSpiApi.h" |
| #include "mvOs.h" |
| #include "spi/mvSpi.h" |
| #include "spi/mvSpiSpec.h" |
| |
| void spi_init (void) |
| { |
| } |
| |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| unsigned int max_hz, unsigned int mode) |
| { |
| struct spi_slave *slave; |
| |
| if (!spi_cs_is_valid(bus, cs)) |
| return NULL; |
| |
| slave = malloc(sizeof(struct spi_slave)); |
| if (!slave) |
| return NULL; |
| |
| slave->bus = bus; |
| slave->cs = cs; |
| |
| mvSysSpiInit(bus,max_hz); |
| return slave; |
| } |
| |
| void spi_free_slave(struct spi_slave *slave) |
| { |
| free(slave); |
| } |
| |
| int spi_claim_bus(struct spi_slave *slave) |
| { |
| return 0; |
| } |
| |
| void spi_release_bus(struct spi_slave *slave) |
| { |
| } |
| |
| #ifndef CONFIG_SPI_CS_IS_VALID |
| /* |
| * you can define this function board specific |
| * define above CONFIG in board specific config file and |
| * provide the function in board specific src file |
| */ |
| int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| { |
| return ((bus <= 1) && (cs >= 0) && (cs < 8)); |
| } |
| #endif |
| |
| void spi_cs_activate(struct spi_slave *slave) |
| { |
| mvSpiCsSet(slave->bus, slave->cs); |
| mvSpiCsAssert(slave->bus); |
| } |
| |
| void spi_cs_deactivate(struct spi_slave *slave) |
| { |
| mvSpiCsDeassert(slave->bus); |
| } |
| |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, |
| void *din, unsigned long flags) |
| { |
| MV_STATUS ret; |
| MV_U8* pdout = (MV_U8*)dout; |
| MV_U8* pdin = (MV_U8*)din; |
| int tmp_bitlen = bitlen; |
| MV_U8 tmp_dout = 0; |
| |
| if (flags & SPI_XFER_BEGIN) |
| spi_cs_activate(slave); |
| |
| /* Verify that the SPI mode is in 8bit mode */ |
| MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG(slave->bus), MV_SPI_BYTE_LENGTH_MASK); |
| |
| /* TX/RX in 8bit chanks */ |
| |
| while (tmp_bitlen > 0) |
| { |
| if(pdout) |
| tmp_dout = (*pdout) & 0xff; |
| |
| /* Transmitted and wait for the transfer to be completed */ |
| if ((ret = mvSpi8bitDataTxRx(slave->bus,tmp_dout, pdin)) != MV_OK) |
| return ret; |
| |
| /* increment the pointers */ |
| //printf("in=[0x%x]",*pdin); |
| if (pdin) |
| pdin++; |
| //printf("out=[0x%x]",*pdout); |
| if (pdout) |
| pdout++; |
| |
| tmp_bitlen-=8; |
| } |
| |
| if (flags & SPI_XFER_END) |
| spi_cs_deactivate(slave); |
| |
| return 0; |
| } |
| #endif |