| /* |
| * (C) Copyright 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <netdev.h> |
| #include <asm/addrspace.h> |
| #include <asm/inca-ip.h> |
| #include <asm/io.h> |
| #include <asm/reboot.h> |
| |
| extern uint incaip_get_cpuclk(void); |
| |
| void _machine_restart(void) |
| { |
| *INCA_IP_WDT_RST_REQ = 0x3f; |
| } |
| |
| static ulong max_sdram_size(void) |
| { |
| /* The only supported SDRAM data width is 16bit. |
| */ |
| #define CONFIG_SYS_DW 2 |
| |
| /* The only supported number of SDRAM banks is 4. |
| */ |
| #define CONFIG_SYS_NB 4 |
| |
| ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0; |
| int cols = cfgpb0 & 0xF; |
| int rows = (cfgpb0 & 0xF0) >> 4; |
| ulong size = (1 << (rows + cols)) * CONFIG_SYS_DW * CONFIG_SYS_NB; |
| |
| return size; |
| } |
| |
| phys_size_t initdram(int board_type) |
| { |
| int rows, cols, best_val = *INCA_IP_SDRAM_MC_CFGPB0; |
| ulong size, max_size = 0; |
| ulong our_address; |
| |
| asm volatile ("move %0, $25" : "=r" (our_address) :); |
| |
| /* Can't probe for RAM size unless we are running from Flash. |
| */ |
| if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1)) |
| { |
| return max_sdram_size(); |
| } |
| |
| for (cols = 0x8; cols <= 0xC; cols++) |
| { |
| for (rows = 0xB; rows <= 0xD; rows++) |
| { |
| *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) | |
| (rows << 4) | cols; |
| size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, |
| max_sdram_size()); |
| |
| if (size > max_size) |
| { |
| best_val = *INCA_IP_SDRAM_MC_CFGPB0; |
| max_size = size; |
| } |
| } |
| } |
| |
| *INCA_IP_SDRAM_MC_CFGPB0 = best_val; |
| return max_size; |
| } |
| |
| int checkboard (void) |
| { |
| unsigned long chipid = *INCA_IP_WDT_CHIPID; |
| int part_num; |
| |
| puts ("Board: INCA-IP "); |
| part_num = (chipid >> 12) & 0xffff; |
| switch (part_num) { |
| case 0xc0: |
| printf ("Standard Version, "); |
| break; |
| case 0xc1: |
| printf ("Basic Version, "); |
| break; |
| default: |
| printf ("Unknown Part Number 0x%x ", part_num); |
| break; |
| } |
| |
| printf ("Chip V1.%ld, ", (chipid >> 28)); |
| |
| printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000); |
| |
| set_io_port_base(0); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_INCA_IP_SWITCH) |
| int board_eth_init(bd_t *bis) |
| { |
| return inca_switch_initialize(bis); |
| } |
| #endif |