| /* |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| /******************************************************************************* |
| Copyright (C) Marvell International Ltd. and its affiliates |
| |
| ******************************************************************************** |
| Marvell GPL License Option |
| |
| If you received this File from Marvell, you may opt to use, redistribute and/or |
| modify this File in accordance with the terms and conditions of the General |
| Public License Version 2, June 1991 (the "GPL License"), a copy of which is |
| available along with the File in the license.txt file or by writing to the Free |
| Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or |
| on the worldwide web at http://www.gnu.org/licenses/gpl.txt. |
| |
| THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY |
| DISCLAIMED. The GPL License provides additional details about this warranty |
| disclaimer. |
| *******************************************************************************/ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <config.h> |
| #include "mv_version.h" |
| |
| /* |
| * Plaform |
| */ |
| /* kostaz: Are there any platform defines ??? */ |
| |
| /* |
| * Machine |
| */ |
| #ifdef CONFIG_AVANTA_LP_FPGA |
| #define CONFIG_MACH_AVANTA_LP_FPGA |
| #endif |
| |
| #include "../../board/mv_ebu/alp/mvSysHwConfig.h" |
| |
| #ifdef MV_INCLUDE_SWITCH |
| /*Avanta LP switch resgiters are accessed by CPU directly*/ |
| /*we provide name unified switch register access APIs with different implementations according to the access way*/ |
| #define MV_SWITCH_DIRECT_ACCESS |
| #endif |
| |
| /* Version number passed to kernel */ |
| #define VER_NUM 0x11120000 /* 2011.12 */ |
| |
| /* |
| * General |
| */ |
| #define MV88F66XX |
| #define MV_SEC_64K |
| #define MV_BOOTSIZE_512K |
| #define MV_LARGE_PAGE |
| #define MV_DDR_64BIT |
| #define MV_BOOTROM |
| |
| #if defined (CONFIG_CUSTOMER_BOARD_0) || defined (CONFIG_CUSTOMER_BOARD_1) |
| #define CONFIG_AVANTA_LP |
| #define CONFIG_CUSTOMER_BOARD_SUPPORT |
| #endif |
| |
| #ifndef CONFIG_MACH_AVANTA_LP_FPGA |
| |
| #define MV_USB |
| #define MV_FS |
| #define CONFIG_CMD_DATE |
| #endif |
| |
| /* |
| * Debug |
| */ |
| #define MV_RT_DEBUG |
| #define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000 /* end of 16M scrubbed by training in bootrom */ |
| #define CONFIG_SYS_ATA_BASE_ADDR 0x20000000 |
| #define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/ |
| #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ |
| |
| /* |
| * Marvell Monitor Extension |
| */ |
| #define enaMonExt() MV_FALSE |
| |
| /* |
| * Clock |
| */ |
| #ifndef __ASSEMBLY__ |
| extern unsigned int mvSysClkGet(void); |
| extern unsigned int mvTclkGet(void); |
| #define UBOOT_CNTR 0 /* counter to use for uboot timer */ |
| #define MV_TCLK_CNTR 1 /* counter to use for uboot timer */ |
| #define MV_REF_CLK_DEV_BIT 1000 /* Number of cycle to eanble timer */ |
| #define MV_REF_CLK_BIT_RATE 100000 /* Ref clock frequency */ |
| #define MV_REF_CLK_INPUT_GPP 6 /* Ref clock frequency input */ |
| |
| #define CONFIG_SYS_HZ 1000 /*800*/ |
| #define CONFIG_SYS_TCLK mvTclkGet() |
| #define CONFIG_SYS_BUS_HZ mvSysClkGet() |
| #define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ |
| #define CONFIG_SYS_FPGA_DRAM_SIZE _256M |
| #endif /* __ASSEMBLY__ */ |
| |
| #define CONFIG_DISPLAY_CPUINFO |
| |
| /********************/ |
| /* Page Table settings */ |
| /********************/ |
| #define MV_PT |
| |
| #ifdef MV_PT |
| #define MV_PT_BASE(cpu) (CONFIG_SYS_MALLOC_BASE - 0x20000 - (cpu * 0x20000)) |
| #endif /* MV_PT */ |
| |
| /********************/ |
| /* AMP settings */ |
| /********************/ |
| #define CONFIG_AMP_SUPPORT 1 |
| #ifdef CONFIG_AMP_SUPPORT |
| #define MAX_AMP_GROUPS 2 |
| #endif |
| |
| /* |
| * High Level Configuration Options |
| */ |
| #define CONFIG_MARVELL |
| #define CONFIG_API |
| |
| /* |
| * Commands |
| */ |
| #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_ELF |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_LOADS |
| #define CONFIG_CMD_BSP |
| #define CONFIG_CMD_MEMORY |
| #define CONFIG_CMD_BOOTD |
| #define CONFIG_CMD_CONSOLE |
| #define CONFIG_CMD_RUN |
| #define CONFIG_CMD_MISC |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_SCSI |
| #define CONFIG_CMD_SAR |
| #define CONFIG_CMD_BOARDCFG |
| #define CONFIG_CMD_STAGE_BOOT |
| #define CONFIG_CMD_RCVR |
| |
| #if defined(MV_INCLUDE_PEX) || defined(MV_INCLUDE_PCI) |
| #define CONFIG_PCI |
| #define CONFIG_CMD_PCI |
| #endif |
| |
| #define CONFIG_ENV_MIN_ENTRIES 128 |
| |
| #ifdef MV_FS |
| /* FS supported */ |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_EXT4 |
| #define CONFIG_FS_EXT4 |
| #define CONFIG_CMD_EXT4_WRITE |
| #define CONFIG_EXT4_WRITE |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_FAT |
| #define CONFIG_FS_FAT |
| #define CONFIG_SUPPORT_VFAT |
| |
| #define CONFIG_SYS_USE_UBI |
| #ifdef CONFIG_SYS_USE_UBI |
| #define CONFIG_CMD_UBI |
| #define CONFIG_CMD_UBIFS |
| #define CONFIG_MTD_DEVICE |
| #define CONFIG_MTD_PARTITIONS |
| #define CONFIG_CMD_MTDPARTS |
| #define CONFIG_RBTREE |
| #define CONFIG_LZO |
| #endif /* CONFIG_SYS_USE_UBI */ |
| #endif /* MV_FS */ |
| /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ |
| |
| /*----------------------------------------------------------------------- |
| * IDE/ATA/SATA stuff (Supports IDE harddisk on PCMCIA Adapter) |
| *----------------------------------------------------------------------- |
| */ |
| |
| #undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ |
| |
| #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ |
| #undef CONFIG_IDE_LED /* LED for ide not supported */ |
| #undef CONFIG_IDE_RESET /* reset for ide not supported */ |
| |
| #define CONFIG_SYS_IDE_MAXBUS 4 /* max. 1 IDE bus */ |
| #define CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_IDE_MAXBUS * 8 /* max. 1 drive per IDE bus */ |
| |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 |
| |
| #undef CONFIG_MAC_PARTITION |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_EFI_PARTITION |
| |
| |
| #define CONFIG_SYS_64BIT_LBA /* Support disk over 2TB */ |
| |
| #define CONFIG_LBA48 |
| //#define CONFIG_SCSI_AHCI |
| #ifdef CONFIG_SCSI_AHCI |
| #define CONFIG_SATA_6121 |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) |
| #endif /* CONFIG_SCSI_AHCI */ |
| |
| #define CONFIG_SCSI_MV94XX |
| #ifdef CONFIG_SCSI_MV94XX |
| //#define CONFIG_SATA_6121 |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 40 /*8 PM * 5 sata port*/ |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) |
| #endif /* CONFIG_SCSI_AHCI */ |
| |
| /* |
| * U-Boot |
| */ |
| #define CONFIG_SYS_MAXARGS 32 /* max number of command argg */ |
| |
| /* SPI Flash configuration */ |
| /*****************************/ |
| #if defined(MV_INCLUDE_SPI) |
| #define CONFIG_CMD_SPI |
| #define CONFIG_CMD_SF |
| #define CONFIG_SPI_FLASH |
| #define CONFIG_SPI_FLASH_STMICRO |
| #define CONFIG_SPI_FLASH_MACRONIX |
| #define CONFIG_ENV_SPI_MAX_HZ 50000000 |
| #define CONFIG_ENV_SPI_CS 0 |
| #define CONFIG_ENV_SPI_BUS 0 |
| |
| #ifndef CONFIG_SF_DEFAULT_SPEED |
| # define CONFIG_SF_DEFAULT_SPEED CONFIG_ENV_SPI_MAX_HZ |
| #endif |
| #ifndef CONFIG_SF_DEFAULT_MODE |
| # define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 |
| #endif |
| #ifndef CONFIG_SF_DEFAULT_CS |
| # define CONFIG_SF_DEFAULT_CS CONFIG_ENV_SPI_CS |
| #endif |
| #ifndef CONFIG_SF_DEFAULT_BUS |
| #define CONFIG_SF_DEFAULT_BUS CONFIG_ENV_SPI_BUS |
| #endif |
| |
| #if defined(MV_SEC_64K) |
| #define CONFIG_ENV_SECT_SIZE_SPI 0x10000 |
| #elif defined(MV_SEC_128K) |
| #define CONFIG_ENV_SECT_SIZE_SPI 0x20000 |
| #elif defined(MV_SEC_256K) |
| #define CONFIG_ENV_SECT_SIZE_SPI 0x40000 |
| #endif |
| |
| #define CONFIG_ENV_OFFSET_SPI 0x100000 |
| #define CONFIG_ENV_SIZE_SPI CONFIG_ENV_SECT_SIZE_SPI |
| |
| |
| /* Boot from SPI settings */ |
| #if defined(MV_SPI_BOOT) |
| #define CONFIG_ENV_IS_IN_SPI_FLASH |
| |
| #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SECT_SIZE_SPI |
| |
| #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE_SPI /* environment takes one sector */ |
| #define CONFIG_ENV_OFFSET CONFIG_ENV_OFFSET_SPI /* (1MB For Image) environment starts here */ |
| #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET_SPI |
| #define MONITOR_HEADER_LEN 0x200 |
| #define CONFIG_SYS_MONITOR_BASE 0 |
| #define CONFIG_SYS_MONITOR_LEN 0x80000 /*(512 << 10) Reserve 512 kB for Monitor */ |
| |
| #ifndef MV_INCLUDE_NOR |
| #ifdef MV_BOOTROM |
| #define CONFIG_SYS_FLASH_BASE DEVICE_SPI_BASE |
| #define CONFIG_SYS_FLASH_SIZE _16M |
| #else |
| #define CONFIG_SYS_FLASH_BASE BOOTDEV_CS_BASE |
| #define CONFIG_SYS_FLASH_SIZE BOOTDEV_CS_SIZE |
| #endif /* ifdef MV_BOOTROM */ |
| #endif |
| #endif //#if defined(MV_SPI_BOOT) |
| #endif //#if defined(MV_SPI) |
| |
| #define CONFIG_SYS_NAND_MAX_CHIPS 1 /* pass compilation for non NAND board configuration */ |
| |
| /* NAND-FLASH stuff */ |
| /************************/ |
| #ifdef MV_NAND |
| #ifndef __ASSEMBLY__ |
| extern int nand_get_env_offs(void); |
| extern int nand_get_env_range(void); |
| #endif /* __ASSEMBLY__ */ |
| #define MV_NAND_PIO_MODE |
| #define MV_NAND_1CS_MODE |
| #define MV_NAND_4BIT_MODE |
| #define MTD_NAND_NFC_INIT_RESET |
| |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_CMD_NAND |
| #define CONFIG_CMD_NAND_TRIMFFS |
| #define CONFIG_MV_MTD_GANG_SUPPORT |
| #define CONFIG_MV_MTD_MLC_NAND_SUPPORT |
| #define CONFIG_SYS_64BIT_VSPRINTF |
| #define CONFIG_SKIP_BAD_BLOCK |
| #undef MV_NFC_DBG |
| #define CONFIG_JFFS2_NAND |
| /* Define the next 2 definitions in order to support YAFFS2 */ |
| #undef CONFIG_CMD_NAND_YAFFS2 |
| #undef CONFIG_MTD_NAND_YAFFS2 |
| |
| #define CONFIG_ENV_SIZE_NAND 0x10000 |
| #define CONFIG_ENV_OFFSET_NAND nand_get_env_offs() |
| #define CONFIG_ENV_RANGE_NAND nand_get_env_range() |
| |
| /* Boot from NAND settings */ |
| #if defined(MV_NAND_BOOT) |
| #define CONFIG_ENV_IS_IN_NAND |
| |
| #define CONFIG_ENV_SIZE CONFIG_ENV_SIZE_NAND /* environment takes one erase block */ |
| #define CONFIG_ENV_OFFSET CONFIG_ENV_OFFSET_NAND /* environment starts here */ |
| #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET_NAND |
| #define MONITOR_HEADER_LEN 0x200 |
| #define CONFIG_SYS_MONITOR_BASE 0 |
| #define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512 kB for Monitor */ |
| #define CONFIG_ENV_RANGE CONFIG_ENV_RANGE_NAND |
| |
| #define MV_NBOOT_BASE 0 |
| #define MV_NBOOT_LEN (4 << 10) /* Reserved 4KB for boot strap */ |
| #endif /* MV_NAND_BOOT */ |
| |
| #if defined(MV_INCLUDE_SPI) |
| #define MV_NAND_SPI |
| #endif |
| #endif /* MV_NAND */ |
| /* |
| * Board init |
| */ |
| /* which initialization functions to call for this board */ |
| #define CONFIG_MISC_INIT_R /* after relloc initialization*/ |
| #define CONFIG_ENV_OVERWRITE /* allow to change env parameters */ |
| #undef CONFIG_WATCHDOG /* watchdog disabled */ |
| |
| /* |
| * Cache |
| */ |
| #define CONFIG_SYS_DCACHE_OFF |
| #define CONFIG_SYS_CACHELINE_SIZE 32 |
| |
| /* |
| * Global definitions |
| */ |
| #define CONFIG_SYS_TEXT_BASE 0x00000000 |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 |
| #define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_TEXT_BASE + (3 << 20)) /* TEXT_BASE + 3M */ |
| |
| #define CONFIG_SYS_MALLOC_LEN (5 << 20) /* Reserve 5MB for malloc*/ |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ |
| |
| /* |
| * DRAM |
| */ |
| #define CONFIG_SYS_DRAM_BANKS 1 |
| #define CONFIG_NR_DRAM_BANKS 2 |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00400000 |
| #define CONFIG_SYS_MEMTEST_END 0x007fffff |
| |
| /* |
| * RTC |
| */ |
| #if defined(CONFIG_CMD_DATE) |
| #define CONFIG_SYS_NVRAM_SIZE 0x00 /* dummy */ |
| #define CONFIG_SYS_NVRAM_BASE_ADDR DEVICE_CS1_BASE /* dummy */ |
| #endif |
| |
| /* |
| * Serial + Parser |
| */ |
| #ifdef CONFIG_AVANTA_LP_FPGA |
| #define CONFIG_BAUDRATE 57600 /* Workaround uart clock divisor issue. */ /* 115200 */ |
| #else |
| #define CONFIG_BAUDRATE 115200 |
| #endif |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 } |
| #define CONFIG_SYS_DUART_CHAN 0 |
| |
| #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ |
| |
| #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print In/Out/Err console assignment. */ |
| |
| /* |
| * Parser |
| */ |
| #define CONFIG_SYS_HUSH_PARSER |
| #define CONFIG_AUTO_COMPLETE |
| |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "Marvell>> " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ |
| |
| /* |
| * Ethernet |
| */ |
| #define MV_ETH_PP2 |
| #define CONFIG_MV_ETH_PP2 |
| #define CONFIG_NET_MULTI |
| #define CONFIG_IPADDR 10.4.50.120 |
| #define CONFIG_SERVERIP 10.4.50.1 |
| #define CONFIG_NETMASK 255.255.255.0 |
| #define ETHADDR "00:00:00:00:51:81" |
| #define ENV_ETH_PRIME "egiga0" |
| |
| /* |
| * PCI and PCIe |
| */ |
| |
| /* |
| * USB |
| */ |
| #ifdef MV_USB |
| #define CONFIG_USB_EHCI |
| #define CONFIG_USB_XHCI |
| #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 1 |
| #define MV_INCLUDE_USB |
| #define CONFIG_CMD_USB |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_EHCI_IS_TDI |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_ISO_PARTITION |
| #define ENV_USB0_MODE "host" |
| #define ENV_USB1_MODE "host" |
| #define ENV_USB_ACTIVE "0" |
| #define ENV_USB_MODE "3" /* 3 = USB3.0 | 2 = USB2.0 */ |
| /* Marvell encapsulate it's USB usage with usbActive internal index, |
| * the usb stack uses 1 controller simultaneously */ |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 |
| /* xHCI code relies on index receiving from that usbActive, |
| * which could go up to 2 for several SoCs. this requires xHCI arrays to be as big as |
| * the actual USB host count */ |
| #define CONFIG_USB_MAX_CONTROLLER_HOST_COUNT 1 |
| #if defined(CONFIG_USB_XHCI) || defined(CONFIG_USB_EHCI) |
| #define CONFIG_USB_XHCI_HCD /* set kernel define - for mv_hal/usb usage */ |
| #endif /* CONFIG_USB_XHCI */ |
| #else |
| #undef MV_INCLUDE_USB |
| #undef CONFIG_CMD_USB |
| #undef CONFIG_USB_STORAGE |
| #endif /* MV_USB */ |
| |
| /* |
| * SDIO and MMC |
| */ |
| #define CONFIG_MMC |
| #define CONFIG_CMD_MMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_MRVL_MMC |
| #define CONFIG_SYS_MMC_BASE (INTER_REGS_BASE + 0xd4000) |
| #define CONFIG_SYS_MMC_MAX_DEVICE 1 |
| |
| /* |
| * Linux boot and other |
| */ |
| #define MV_BOOTARGS_END ":10.4.50.254:255.255.255.0:AvantaLP:eth0:none" |
| #define MV_BOOTARGS_END_SWITCH ":::AvantaLP:eth0:none" |
| #define RCVR_IP_ADDR "169.254.100.100" |
| #define RCVR_LOAD_ADDR "0x02000000" |
| |
| #define CONFIG_ZERO_BOOTDELAY_CHECK |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x02000000 /* default load address */ |
| #define CONFIG_SYS_MIN_HDR_DEL_SIZE 0x100 |
| |
| #undef CONFIG_BOOTARGS |
| |
| /* |
| * Auto boot |
| */ |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_ROOTPATH "/srv/nfs/" /* Default Dir for NFS */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 8 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */ |
| |
| #define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */ |
| |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| #define CONFIG_CMDLINE_EDITING 1 |
| #define CONFIG_INITRD_TAG 1 /* enable INITRD tag for ramdisk data */ |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_MARVELL_TAG |
| #define ATAG_MARVELL 0x41000403 |
| |
| /* |
| * I2C |
| */ |
| #if defined(CONFIG_CMD_I2C) |
| #define CONFIG_I2C_MULTI_BUS |
| #define CONFIG_SYS_MAX_I2C_BUS 2 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_SYS_I2C_MULTI_EEPROMS |
| #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed default */ |
| #endif |
| |
| /* |
| * PCI |
| */ |
| #ifdef CONFIG_PCI |
| #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ |
| #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| |
| /* PnP PCI Network cards */ |
| #define CONFIG_EEPRO100 /* Support for Intel 82557/82559/82559ER chips */ |
| #define CONFIG_E1000 |
| #define CONFIG_SK98 |
| #define YUK_ETHADDR "00:00:00:EE:51:81" |
| #endif |
| |
| #define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ |
| #define PCI_HOST_FORCE 1 /* configure as pci host */ |
| #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ |
| |
| |
| #define CONFIG_UBOOT_SIZE 0x100000 |
| #define CONFIG_SPARE_AREA 0x400000 |
| /* |
| * NOR Flash |
| */ |
| #if defined(MV_INCLUDE_NOR) |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_SYS_FLASH_PROTECTION |
| #define CONFIG_FLASH_CFI_DRIVER |
| |
| #ifdef CONFIG_MACH_AVANTA_LP_FPGA |
| #define CONFIG_FLASH_CFI_LEGACY |
| #define CONFIG_SYS_FLASH_LEGACY_512Kx8 |
| #endif |
| |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 |
| #define CONFIG_SYS_FLASH_BASE NOR_CS_BASE |
| #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT |
| |
| #define CONFIG_FLASH_SHOW_PROGRESS 1 |
| #define CONFIG_SYS_FLASH_EMPTY_INFO |
| #if !defined(CONFIG_MACH_AVANTA_LP_FPGA) |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| #endif |
| |
| #define CONFIG_CMD_FLASH |
| #undef CONFIG_CMD_IMLS |
| |
| #if defined(MV_NOR_BOOT) |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_SIZE 0x10000 |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #define CONFIG_ENV_OFFSET 0x60000 |
| #define CONFIG_ENV_RANGE CONFIG_ENV_SIZE * 8 |
| #define CONFIG_ENV_ADDR (NOR_CS_BASE + CONFIG_ENV_OFFSET) |
| #define MONITOR_HEADER_LEN 0x200 |
| #define CONFIG_SYS_MONITOR_LEN 0x70000 /* 448 K */ |
| #define CONFIG_SYS_MONITOR_BASE (0 + CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) |
| #endif /* MV_NOR_BOOT */ |
| #else |
| #define CONFIG_SYS_NO_FLASH |
| #undef CONFIG_CMD_FLASH |
| #undef CONFIG_CMD_IMLS |
| #endif /* MV_INCLUDE_NOR */ |
| |
| /* |
| * Other |
| */ |
| #define MV_DFL_REGS 0xf1000000 /* boot time MV_REGS */ |
| #define MV_REGS INTER_REGS_BASE /* MV Registers will be mapped here */ |
| #define BOARD_LATE_INIT |
| #define CONFIG_BOARD_LATE_INIT |
| #undef CONFIG_USE_IRQ |
| |
| #define CONFIG_STACKSIZE (1 << 20) /* regular stack - up to 4M (in case of exception)*/ |
| #define CONFIG_ALP_HW_SEMAPHORE_WA |
| |
| #endif /* __CONFIG_H */ |
