| /* |
| * Copyright (c) 2012 Samsung Electronics. |
| * Abhilash Kesavan <a.kesavan@samsung.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <fdtdec.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/sromc.h> |
| |
| static void exynos5_uart_config(int peripheral) |
| { |
| struct exynos5_gpio_part1 *gpio1 = |
| (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); |
| struct s5p_gpio_bank *bank; |
| int i, start, count; |
| |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| bank = &gpio1->a0; |
| start = 0; |
| count = 4; |
| break; |
| case PERIPH_ID_UART1: |
| bank = &gpio1->d0; |
| start = 0; |
| count = 4; |
| break; |
| case PERIPH_ID_UART2: |
| bank = &gpio1->a1; |
| start = 0; |
| count = 4; |
| break; |
| case PERIPH_ID_UART3: |
| bank = &gpio1->a1; |
| start = 4; |
| count = 2; |
| break; |
| } |
| for (i = start; i < start + count; i++) { |
| s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); |
| s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); |
| } |
| } |
| |
| static int exynos5_mmc_config(int peripheral, int flags) |
| { |
| struct exynos5_gpio_part1 *gpio1 = |
| (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); |
| struct s5p_gpio_bank *bank, *bank_ext; |
| int i, start = 0, gpio_func = 0; |
| |
| switch (peripheral) { |
| case PERIPH_ID_SDMMC0: |
| bank = &gpio1->c0; |
| bank_ext = &gpio1->c1; |
| start = 0; |
| gpio_func = GPIO_FUNC(0x2); |
| break; |
| case PERIPH_ID_SDMMC1: |
| bank = &gpio1->c2; |
| bank_ext = NULL; |
| break; |
| case PERIPH_ID_SDMMC2: |
| bank = &gpio1->c3; |
| bank_ext = &gpio1->c4; |
| start = 3; |
| gpio_func = GPIO_FUNC(0x3); |
| break; |
| case PERIPH_ID_SDMMC3: |
| bank = &gpio1->c4; |
| bank_ext = NULL; |
| break; |
| } |
| if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) { |
| debug("SDMMC device %d does not support 8bit mode", |
| peripheral); |
| return -1; |
| } |
| if (flags & PINMUX_FLAG_8BIT_MODE) { |
| for (i = start; i <= (start + 3); i++) { |
| s5p_gpio_cfg_pin(bank_ext, i, gpio_func); |
| s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP); |
| s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); |
| } |
| } |
| for (i = 0; i < 2; i++) { |
| s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); |
| s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); |
| s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); |
| } |
| for (i = 3; i <= 6; i++) { |
| s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); |
| s5p_gpio_set_pull(bank, i, GPIO_PULL_UP); |
| s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); |
| } |
| |
| return 0; |
| } |
| |
| static void exynos5_sromc_config(int flags) |
| { |
| struct exynos5_gpio_part1 *gpio1 = |
| (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); |
| int i; |
| |
| /* |
| * SROM:CS1 and EBI |
| * |
| * GPY0[0] SROM_CSn[0] |
| * GPY0[1] SROM_CSn[1](2) |
| * GPY0[2] SROM_CSn[2] |
| * GPY0[3] SROM_CSn[3] |
| * GPY0[4] EBI_OEn(2) |
| * GPY0[5] EBI_EEn(2) |
| * |
| * GPY1[0] EBI_BEn[0](2) |
| * GPY1[1] EBI_BEn[1](2) |
| * GPY1[2] SROM_WAIT(2) |
| * GPY1[3] EBI_DATA_RDn(2) |
| */ |
| s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK), |
| GPIO_FUNC(2)); |
| s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2)); |
| s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2)); |
| |
| for (i = 0; i < 4; i++) |
| s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2)); |
| |
| /* |
| * EBI: 8 Addrss Lines |
| * |
| * GPY3[0] EBI_ADDR[0](2) |
| * GPY3[1] EBI_ADDR[1](2) |
| * GPY3[2] EBI_ADDR[2](2) |
| * GPY3[3] EBI_ADDR[3](2) |
| * GPY3[4] EBI_ADDR[4](2) |
| * GPY3[5] EBI_ADDR[5](2) |
| * GPY3[6] EBI_ADDR[6](2) |
| * GPY3[7] EBI_ADDR[7](2) |
| * |
| * EBI: 16 Data Lines |
| * |
| * GPY5[0] EBI_DATA[0](2) |
| * GPY5[1] EBI_DATA[1](2) |
| * GPY5[2] EBI_DATA[2](2) |
| * GPY5[3] EBI_DATA[3](2) |
| * GPY5[4] EBI_DATA[4](2) |
| * GPY5[5] EBI_DATA[5](2) |
| * GPY5[6] EBI_DATA[6](2) |
| * GPY5[7] EBI_DATA[7](2) |
| * |
| * GPY6[0] EBI_DATA[8](2) |
| * GPY6[1] EBI_DATA[9](2) |
| * GPY6[2] EBI_DATA[10](2) |
| * GPY6[3] EBI_DATA[11](2) |
| * GPY6[4] EBI_DATA[12](2) |
| * GPY6[5] EBI_DATA[13](2) |
| * GPY6[6] EBI_DATA[14](2) |
| * GPY6[7] EBI_DATA[15](2) |
| */ |
| for (i = 0; i < 8; i++) { |
| s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2)); |
| s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP); |
| |
| s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2)); |
| s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP); |
| |
| s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2)); |
| s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP); |
| } |
| } |
| |
| static void exynos5_i2c_config(int peripheral, int flags) |
| { |
| |
| struct exynos5_gpio_part1 *gpio1 = |
| (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); |
| |
| switch (peripheral) { |
| case PERIPH_ID_I2C0: |
| s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2)); |
| s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C1: |
| s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2)); |
| s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C2: |
| s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C3: |
| s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C4: |
| s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C5: |
| s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C6: |
| s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4)); |
| s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4)); |
| break; |
| case PERIPH_ID_I2C7: |
| s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3)); |
| break; |
| } |
| } |
| |
| static void exynos5_i2s_config(int peripheral) |
| { |
| int i; |
| struct exynos5_gpio_part1 *gpio1 = |
| (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); |
| |
| for (i = 0; i < 5; i++) |
| s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); |
| } |
| |
| void exynos5_spi_config(int peripheral) |
| { |
| int cfg = 0, pin = 0, i; |
| struct s5p_gpio_bank *bank = NULL; |
| struct exynos5_gpio_part1 *gpio1 = |
| (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); |
| struct exynos5_gpio_part2 *gpio2 = |
| (struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2(); |
| |
| switch (peripheral) { |
| case PERIPH_ID_SPI0: |
| bank = &gpio1->a2; |
| cfg = GPIO_FUNC(0x2); |
| pin = 0; |
| break; |
| case PERIPH_ID_SPI1: |
| bank = &gpio1->a2; |
| cfg = GPIO_FUNC(0x2); |
| pin = 4; |
| break; |
| case PERIPH_ID_SPI2: |
| bank = &gpio1->b1; |
| cfg = GPIO_FUNC(0x5); |
| pin = 1; |
| break; |
| case PERIPH_ID_SPI3: |
| bank = &gpio2->f1; |
| cfg = GPIO_FUNC(0x2); |
| pin = 0; |
| break; |
| case PERIPH_ID_SPI4: |
| for (i = 0; i < 2; i++) { |
| s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4)); |
| s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4)); |
| } |
| break; |
| } |
| if (peripheral != PERIPH_ID_SPI4) { |
| for (i = pin; i < pin + 4; i++) |
| s5p_gpio_cfg_pin(bank, i, cfg); |
| } |
| } |
| |
| static int exynos5_pinmux_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_UART0: |
| case PERIPH_ID_UART1: |
| case PERIPH_ID_UART2: |
| case PERIPH_ID_UART3: |
| exynos5_uart_config(peripheral); |
| break; |
| case PERIPH_ID_SDMMC0: |
| case PERIPH_ID_SDMMC1: |
| case PERIPH_ID_SDMMC2: |
| case PERIPH_ID_SDMMC3: |
| return exynos5_mmc_config(peripheral, flags); |
| case PERIPH_ID_SROMC: |
| exynos5_sromc_config(flags); |
| break; |
| case PERIPH_ID_I2C0: |
| case PERIPH_ID_I2C1: |
| case PERIPH_ID_I2C2: |
| case PERIPH_ID_I2C3: |
| case PERIPH_ID_I2C4: |
| case PERIPH_ID_I2C5: |
| case PERIPH_ID_I2C6: |
| case PERIPH_ID_I2C7: |
| exynos5_i2c_config(peripheral, flags); |
| break; |
| case PERIPH_ID_I2S1: |
| exynos5_i2s_config(peripheral); |
| break; |
| case PERIPH_ID_SPI0: |
| case PERIPH_ID_SPI1: |
| case PERIPH_ID_SPI2: |
| case PERIPH_ID_SPI3: |
| case PERIPH_ID_SPI4: |
| exynos5_spi_config(peripheral); |
| break; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static void exynos4_i2c_config(int peripheral, int flags) |
| { |
| struct exynos4_gpio_part1 *gpio1 = |
| (struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1(); |
| |
| switch (peripheral) { |
| case PERIPH_ID_I2C0: |
| s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2)); |
| s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C1: |
| s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2)); |
| s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2)); |
| break; |
| case PERIPH_ID_I2C2: |
| s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C3: |
| s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C4: |
| s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C5: |
| s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3)); |
| break; |
| case PERIPH_ID_I2C6: |
| s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4)); |
| s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4)); |
| break; |
| case PERIPH_ID_I2C7: |
| s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3)); |
| s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3)); |
| break; |
| } |
| } |
| |
| static int exynos4_mmc_config(int peripheral, int flags) |
| { |
| struct exynos4_gpio_part2 *gpio2 = |
| (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); |
| struct s5p_gpio_bank *bank, *bank_ext; |
| int i; |
| |
| switch (peripheral) { |
| case PERIPH_ID_SDMMC0: |
| bank = &gpio2->k0; |
| bank_ext = &gpio2->k1; |
| break; |
| case PERIPH_ID_SDMMC2: |
| bank = &gpio2->k2; |
| bank_ext = &gpio2->k3; |
| break; |
| default: |
| return -1; |
| } |
| for (i = 0; i < 7; i++) { |
| if (i == 2) |
| continue; |
| s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); |
| s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); |
| s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); |
| } |
| if (flags & PINMUX_FLAG_8BIT_MODE) { |
| for (i = 3; i < 7; i++) { |
| s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); |
| s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE); |
| s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int exynos4_pinmux_config(int peripheral, int flags) |
| { |
| switch (peripheral) { |
| case PERIPH_ID_I2C0: |
| case PERIPH_ID_I2C1: |
| case PERIPH_ID_I2C2: |
| case PERIPH_ID_I2C3: |
| case PERIPH_ID_I2C4: |
| case PERIPH_ID_I2C5: |
| case PERIPH_ID_I2C6: |
| case PERIPH_ID_I2C7: |
| exynos4_i2c_config(peripheral, flags); |
| break; |
| case PERIPH_ID_SDMMC0: |
| case PERIPH_ID_SDMMC2: |
| return exynos4_mmc_config(peripheral, flags); |
| case PERIPH_ID_SDMMC1: |
| case PERIPH_ID_SDMMC3: |
| case PERIPH_ID_SDMMC4: |
| printf("SDMMC device %d not implemented\n", peripheral); |
| return -1; |
| default: |
| debug("%s: invalid peripheral %d", __func__, peripheral); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int exynos_pinmux_config(int peripheral, int flags) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_pinmux_config(peripheral, flags); |
| else if (cpu_is_exynos4()) |
| return exynos4_pinmux_config(peripheral, flags); |
| else { |
| debug("pinmux functionality not supported\n"); |
| return -1; |
| } |
| } |
| |
| #ifdef CONFIG_OF_CONTROL |
| static int exynos5_pinmux_decode_periph_id(const void *blob, int node) |
| { |
| int err; |
| u32 cell[3]; |
| |
| err = fdtdec_get_int_array(blob, node, "interrupts", cell, |
| ARRAY_SIZE(cell)); |
| if (err) |
| return PERIPH_ID_NONE; |
| |
| /* check for invalid peripheral id */ |
| if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0)) |
| return cell[1]; |
| |
| debug(" invalid peripheral id\n"); |
| return PERIPH_ID_NONE; |
| } |
| |
| int pinmux_decode_periph_id(const void *blob, int node) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_pinmux_decode_periph_id(blob, node); |
| else |
| return PERIPH_ID_NONE; |
| } |
| #endif |