include/configs/tegra-common-post.h - uboot/armada - Git at Google

 /*
  * (C) Copyright 2010-2012
  * NVIDIA Corporation <www.nvidia.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __TEGRA_COMMON_POST_H
 #define __TEGRA_COMMON_POST_H

 #ifdef CONFIG_BOOTCOMMAND

 #define BOOTCMDS_COMMON ""

 #else

 #ifdef CONFIG_CMD_MMC
 #define BOOTCMDS_MMC \
 	"mmc_boot=" \
 		"setenv devtype mmc; " \
 		"if mmc dev ${devnum}; then " \
 			"run scan_boot; " \
 		"fi\0" \
 	"bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
 	"bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
 #define BOOT_TARGETS_MMC "mmc1 mmc0"
 #else
 #define BOOTCMDS_MMC ""
 #define BOOT_TARGETS_MMC ""
 #endif

 #ifdef CONFIG_CMD_USB
 #define BOOTCMD_INIT_USB "run usb_init; "
 #define BOOTCMDS_USB \
 	"usb_init=" \
 		"if ${usb_need_init}; then " \
 			"set usb_need_init false; " \
 			"usb start 0; " \
 		"fi\0" \
 	\
 	"usb_boot=" \
 		"setenv devtype usb; " \
 		BOOTCMD_INIT_USB \
 		"if usb dev ${devnum}; then " \
 			"run scan_boot; " \
 		"fi\0" \
 	\
 	"bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
 #define BOOT_TARGETS_USB "usb0"
 #else
 #define BOOTCMD_INIT_USB ""
 #define BOOTCMDS_USB ""
 #define BOOT_TARGETS_USB ""
 #endif

 #ifdef CONFIG_CMD_DHCP
 #define BOOTCMDS_DHCP \
 	"bootcmd_dhcp=" \
 		BOOTCMD_INIT_USB \
 		"if dhcp ${scriptaddr} boot.scr.uimg; then "\
 			"source ${scriptaddr}; " \
 		"fi\0"
 #define BOOT_TARGETS_DHCP "dhcp"
 #else
 #define BOOTCMDS_DHCP ""
 #define BOOT_TARGETS_DHCP ""
 #endif

 #define BOOTCMDS_COMMON \
 	"rootpart=1\0" \
 	\
 	"script_boot="                                                    \
 		"if load ${devtype} ${devnum}:${rootpart} "               \
 				"${scriptaddr} ${prefix}${script}; then " \
 			"echo ${script} found! Executing ...;"            \
 			"source ${scriptaddr};"                           \
 		"fi;\0"                                                   \
 	\
 	"scan_boot="                                                      \
 		"echo Scanning ${devtype} ${devnum}...; "                 \
 		"for prefix in ${boot_prefixes}; do "                     \
 			"for script in ${boot_scripts}; do "              \
 				"run script_boot; "                       \
 			"done; "                                          \
 		"done;\0"                                                 \
 	\
 	"boot_targets=" \
 		BOOT_TARGETS_MMC " " \
 		BOOT_TARGETS_USB " " \
 		BOOT_TARGETS_DHCP " " \
 		"\0" \
 	\
 	"boot_prefixes=/ /boot/\0" \
 	\
 	"boot_scripts=boot.scr.uimg boot.scr\0" \
 	\
 	BOOTCMDS_MMC \
 	BOOTCMDS_USB \
 	BOOTCMDS_DHCP

 #define CONFIG_BOOTCOMMAND \
 	"for target in ${boot_targets}; do run bootcmd_${target}; done"

 #endif

 /*
  * Memory layout for where various images get loaded by boot scripts:
  *
  * scriptaddr can be pretty much anywhere that doesn't conflict with something
  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
  *
  * kernel_addr_r must be within the first 128M of RAM in order for the
  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
  *   should not overlap that area, or the kernel will have to copy itself
  *   somewhere else before decompression. Similarly, the address of any other
  *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
  *   this up to 16M allows for a sizable kernel to be decompressed below the
  *   compressed load address.
  *
  * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
  *   the compressed kernel to be up to 16M too.
  *
  * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
  *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
  */
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"scriptaddr=0x10000000\0" \
 	"kernel_addr_r=0x01000000\0" \
 	"fdt_addr_r=0x02000000\0" \
 	"ramdisk_addr_r=0x02100000\0" \

 #ifdef CONFIG_TEGRA_KEYBOARD
 #define STDIN_KBD_KBC ",tegra-kbc"
 #else
 #define STDIN_KBD_KBC ""
 #endif

 #ifdef CONFIG_USB_KEYBOARD
 #define STDIN_KBD_USB ",usbkbd"
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT			"usb start"
 #else
 #define STDIN_KBD_USB ""
 #endif

 #define TEGRA_DEVICE_SETTINGS \
 	"stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
 	"stdout=serial,lcd\0" \
 	"stderr=serial,lcd\0" \

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	TEGRA_DEVICE_SETTINGS \
 	MEM_LAYOUT_ENV_SETTINGS \
 	BOOTCMDS_COMMON

 /* overrides for SPL build here */
 #ifdef CONFIG_SPL_BUILD

 /* remove devicetree support */
 #ifdef CONFIG_OF_CONTROL
 #undef CONFIG_OF_CONTROL
 #endif

 /* remove I2C support */
 #ifdef CONFIG_TEGRA_I2C
 #undef CONFIG_TEGRA_I2C
 #endif
 #ifdef CONFIG_CMD_I2C
 #undef CONFIG_CMD_I2C
 #endif

 /* remove MMC support */
 #ifdef CONFIG_MMC
 #undef CONFIG_MMC
 #endif
 #ifdef CONFIG_GENERIC_MMC
 #undef CONFIG_GENERIC_MMC
 #endif
 #ifdef CONFIG_TEGRA_MMC
 #undef CONFIG_TEGRA_MMC
 #endif
 #ifdef CONFIG_CMD_MMC
 #undef CONFIG_CMD_MMC
 #endif

 /* remove partitions/filesystems */
 #ifdef CONFIG_DOS_PARTITION
 #undef CONFIG_DOS_PARTITION
 #endif
 #ifdef CONFIG_EFI_PARTITION
 #undef CONFIG_EFI_PARTITION
 #endif
 #ifdef CONFIG_CMD_FS_GENERIC
 #undef CONFIG_CMD_FS_GENERIC
 #endif
 #ifdef CONFIG_CMD_EXT4
 #undef CONFIG_CMD_EXT4
 #endif
 #ifdef CONFIG_CMD_EXT2
 #undef CONFIG_CMD_EXT2
 #endif
 #ifdef CONFIG_CMD_FAT
 #undef CONFIG_CMD_FAT
 #endif
 #ifdef CONFIG_FS_EXT4
 #undef CONFIG_FS_EXT4
 #endif
 #ifdef CONFIG_FS_FAT
 #undef CONFIG_FS_FAT
 #endif

 /* remove USB */
 #ifdef CONFIG_USB_EHCI
 #undef CONFIG_USB_EHCI
 #endif
 #ifdef CONFIG_USB_EHCI_TEGRA
 #undef CONFIG_USB_EHCI_TEGRA
 #endif
 #ifdef CONFIG_USB_STORAGE
 #undef CONFIG_USB_STORAGE
 #endif
 #ifdef CONFIG_CMD_USB
 #undef CONFIG_CMD_USB
 #endif

 /* remove part command support */
 #ifdef CONFIG_PARTITION_UUIDS
 #undef CONFIG_PARTITION_UUIDS
 #endif

 #ifdef CONFIG_CMD_PART
 #undef CONFIG_CMD_PART
 #endif

 #endif /* CONFIG_SPL_BUILD */

 #endif /* __TEGRA_COMMON_POST_H */
	/*
	* (C) Copyright 2010-2012
	* NVIDIA Corporation <www.nvidia.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __TEGRA_COMMON_POST_H
	#define __TEGRA_COMMON_POST_H

	#ifdef CONFIG_BOOTCOMMAND

	#define BOOTCMDS_COMMON ""

	#else

	#ifdef CONFIG_CMD_MMC
	#define BOOTCMDS_MMC \
	"mmc_boot=" \
	"setenv devtype mmc; " \
	"if mmc dev ${devnum}; then " \
	"run scan_boot; " \
	"fi\0" \
	"bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
	"bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
	#define BOOT_TARGETS_MMC "mmc1 mmc0"
	#else
	#define BOOTCMDS_MMC ""
	#define BOOT_TARGETS_MMC ""
	#endif

	#ifdef CONFIG_CMD_USB
	#define BOOTCMD_INIT_USB "run usb_init; "
	#define BOOTCMDS_USB \
	"usb_init=" \
	"if ${usb_need_init}; then " \
	"set usb_need_init false; " \
	"usb start 0; " \
	"fi\0" \
	\
	"usb_boot=" \
	"setenv devtype usb; " \
	BOOTCMD_INIT_USB \
	"if usb dev ${devnum}; then " \
	"run scan_boot; " \
	"fi\0" \
	\
	"bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
	#define BOOT_TARGETS_USB "usb0"
	#else
	#define BOOTCMD_INIT_USB ""
	#define BOOTCMDS_USB ""
	#define BOOT_TARGETS_USB ""
	#endif

	#ifdef CONFIG_CMD_DHCP
	#define BOOTCMDS_DHCP \
	"bootcmd_dhcp=" \
	BOOTCMD_INIT_USB \
	"if dhcp ${scriptaddr} boot.scr.uimg; then "\
	"source ${scriptaddr}; " \
	"fi\0"
	#define BOOT_TARGETS_DHCP "dhcp"
	#else
	#define BOOTCMDS_DHCP ""
	#define BOOT_TARGETS_DHCP ""
	#endif

	#define BOOTCMDS_COMMON \
	"rootpart=1\0" \
	\
	"script_boot=" \
	"if load ${devtype} ${devnum}:${rootpart} " \
	"${scriptaddr} ${prefix}${script}; then " \
	"echo ${script} found! Executing ...;" \
	"source ${scriptaddr};" \
	"fi;\0" \
	\
	"scan_boot=" \
	"echo Scanning ${devtype} ${devnum}...; " \
	"for prefix in ${boot_prefixes}; do " \
	"for script in ${boot_scripts}; do " \
	"run script_boot; " \
	"done; " \
	"done;\0" \
	\
	"boot_targets=" \
	BOOT_TARGETS_MMC " " \
	BOOT_TARGETS_USB " " \
	BOOT_TARGETS_DHCP " " \
	"\0" \
	\
	"boot_prefixes=/ /boot/\0" \
	\
	"boot_scripts=boot.scr.uimg boot.scr\0" \
	\
	BOOTCMDS_MMC \
	BOOTCMDS_USB \
	BOOTCMDS_DHCP

	#define CONFIG_BOOTCOMMAND \
	"for target in ${boot_targets}; do run bootcmd_${target}; done"

	#endif

	/*
	* Memory layout for where various images get loaded by boot scripts:
	*
	* scriptaddr can be pretty much anywhere that doesn't conflict with something
	* else. Put it above BOOTMAPSZ to eliminate conflicts.
	*
	* kernel_addr_r must be within the first 128M of RAM in order for the
	* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
	* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
	* should not overlap that area, or the kernel will have to copy itself
	* somewhere else before decompression. Similarly, the address of any other
	* data passed to the kernel shouldn't overlap the start of RAM. Pushing
	* this up to 16M allows for a sizable kernel to be decompressed below the
	* compressed load address.
	*
	* fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
	* the compressed kernel to be up to 16M too.
	*
	* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
	* for the FDT/DTB to be up to 1M, which is hopefully plenty.
	*/
	#define MEM_LAYOUT_ENV_SETTINGS \
	"scriptaddr=0x10000000\0" \
	"kernel_addr_r=0x01000000\0" \
	"fdt_addr_r=0x02000000\0" \
	"ramdisk_addr_r=0x02100000\0" \

	#ifdef CONFIG_TEGRA_KEYBOARD
	#define STDIN_KBD_KBC ",tegra-kbc"
	#else
	#define STDIN_KBD_KBC ""
	#endif

	#ifdef CONFIG_USB_KEYBOARD
	#define STDIN_KBD_USB ",usbkbd"
	#define CONFIG_SYS_USB_EVENT_POLL
	#define CONFIG_PREBOOT "usb start"
	#else
	#define STDIN_KBD_USB ""
	#endif

	#define TEGRA_DEVICE_SETTINGS \
	"stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
	"stdout=serial,lcd\0" \
	"stderr=serial,lcd\0" \

	#define CONFIG_EXTRA_ENV_SETTINGS \
	TEGRA_DEVICE_SETTINGS \
	MEM_LAYOUT_ENV_SETTINGS \
	BOOTCMDS_COMMON

	/* overrides for SPL build here */
	#ifdef CONFIG_SPL_BUILD

	/* remove devicetree support */
	#ifdef CONFIG_OF_CONTROL
	#undef CONFIG_OF_CONTROL
	#endif

	/* remove I2C support */
	#ifdef CONFIG_TEGRA_I2C
	#undef CONFIG_TEGRA_I2C
	#endif
	#ifdef CONFIG_CMD_I2C
	#undef CONFIG_CMD_I2C
	#endif

	/* remove MMC support */
	#ifdef CONFIG_MMC
	#undef CONFIG_MMC
	#endif
	#ifdef CONFIG_GENERIC_MMC
	#undef CONFIG_GENERIC_MMC
	#endif
	#ifdef CONFIG_TEGRA_MMC
	#undef CONFIG_TEGRA_MMC
	#endif
	#ifdef CONFIG_CMD_MMC
	#undef CONFIG_CMD_MMC
	#endif

	/* remove partitions/filesystems */
	#ifdef CONFIG_DOS_PARTITION
	#undef CONFIG_DOS_PARTITION
	#endif
	#ifdef CONFIG_EFI_PARTITION
	#undef CONFIG_EFI_PARTITION
	#endif
	#ifdef CONFIG_CMD_FS_GENERIC
	#undef CONFIG_CMD_FS_GENERIC
	#endif
	#ifdef CONFIG_CMD_EXT4
	#undef CONFIG_CMD_EXT4
	#endif
	#ifdef CONFIG_CMD_EXT2
	#undef CONFIG_CMD_EXT2
	#endif
	#ifdef CONFIG_CMD_FAT
	#undef CONFIG_CMD_FAT
	#endif
	#ifdef CONFIG_FS_EXT4
	#undef CONFIG_FS_EXT4
	#endif
	#ifdef CONFIG_FS_FAT
	#undef CONFIG_FS_FAT
	#endif

	/* remove USB */
	#ifdef CONFIG_USB_EHCI
	#undef CONFIG_USB_EHCI
	#endif
	#ifdef CONFIG_USB_EHCI_TEGRA
	#undef CONFIG_USB_EHCI_TEGRA
	#endif
	#ifdef CONFIG_USB_STORAGE
	#undef CONFIG_USB_STORAGE
	#endif
	#ifdef CONFIG_CMD_USB
	#undef CONFIG_CMD_USB
	#endif

	/* remove part command support */
	#ifdef CONFIG_PARTITION_UUIDS
	#undef CONFIG_PARTITION_UUIDS
	#endif

	#ifdef CONFIG_CMD_PART
	#undef CONFIG_CMD_PART
	#endif

	#endif /* CONFIG_SPL_BUILD */

	#endif /* __TEGRA_COMMON_POST_H */