blob: 2fc50696f5ef3175ea5211565d59f33d1280aedd [file] [log] [blame]
Supported hardware: only MX28EVK rev D is supported in U-boot.
Files of the MX28EVK port
arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28
arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28
board/freescale/mx28evk/ - MX28EVK board specific files
include/configs/mx28evk.h - MX28EVK configuration file
Jumper configuration
To boot MX28EVK from an SD card, set the boot mode DIP switches as:
* Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42)
* JTAG PSWITCH RESET: To the right (reset disabled)
* Battery Source: Down
* Wall 5V: Up
* VDD 5V: To the left (off)
* Hold Button: Down (off)
Follow the instructions from doc/README.mx28_common to generate a bootable SD
Insert the SD card in slot 0, power up the board and U-boot will boot.