blob: 38401131fa68b9aec350d6b873bc07bf4acb40c3 [file] [log] [blame]
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*******************************************************************************
Copyright (C) Marvell International Ltd. and its affiliates
********************************************************************************
Marvell GPL License Option
If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File in accordance with the terms and conditions of the General
Public License Version 2, June 1991 (the "GPL License"), a copy of which is
available along with the File in the license.txt file or by writing to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED. The GPL License provides additional details about this warranty
disclaimer.
*******************************************************************************/
#include <common.h>
#include "mvTypes.h"
#include "mvBoardEnvLib.h"
#include "mvCpuIf.h"
#include "mvCtrlEnvLib.h"
#include "mvDebug.h"
#include "device/mvDevice.h"
#include "twsi/mvTwsi.h"
#include "ctrlEnv/mvCtrlEnvLib.h"
#if defined(MV_ETH_LEGACY)
#include "eth/mvEth.h"
#include "mv_eth_legacy.h"
#elif defined(MV_ETH_NETA)
#include "neta/gbe/mvNeta.h"
#else
#include "pp2/gbe/mvPp2Gbe.h"
#endif /* MV_ETH_LEGACY or MV_ETH_NETA or MV_ETH_PP2 */
#include "pex/mvPex.h"
#include "gpp/mvGpp.h"
#include "gpp/mvGppRegs.h"
#include "mvSysHwConfig.h"
#include "mv_phy.h"
#include "ddr2_3/mvDramIfRegs.h"
#include "mv_egiga_neta.h"
#ifdef MV_INCLUDE_RTC
#include "rtc/integ_rtc/mvRtc.h"
#include "rtc.h"
#elif CONFIG_RTC_DS1338_DS1339
#include "rtc/ext_rtc/mvDS133x.h"
#endif
#if defined(MV_INCLUDE_XOR)
#include "xor/mvXor.h"
#include "mvSysXorApi.h"
#endif
#if defined(MV_INCLUDE_IDMA)
#include "sys/mvSysIdma.h"
#include "idma/mvIdma.h"
#endif
#if defined(MV_INCLUDE_USB)
#include "usb/mvUsb.h"
#include "mvSysUsbApi.h"
#endif
#ifdef CONFIG_AMP_SUPPORT
#include "mv_amp.h"
#endif
#include "cpu/mvCpu.h"
#include "nand.h"
#include "spi_flash.h"
#ifdef CONFIG_PCI
#include <pci.h>
#endif
#include <asm/arch-armv7/vfpinstr.h>
#include <asm/arch-armv7/vfp.h>
#include <net.h>
#include <netdev.h>
#include <command.h>
#include "mvCommon.h"
#include "uart/mvUart.h"
/* #define MV_DEBUG */
#ifdef MV_DEBUG
#define DB(x) x
#else
#define DB(x)
#endif
extern int display_dram_config(int print);
extern void fdt_env_setup(char *fdtfile, MV_BOOL runUpdate);
int late_print_cpuinfo(void);
/* CPU address decode table. */
MV_CPU_DEC_WIN mvCpuAddrWinMap[] = MV_CPU_IF_ADDR_WIN_MAP_TBL;
void mv_cpu_init(void);
#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
void mv_set_power_scheme(void);
#endif
extern nand_info_t nand_info[]; /* info for NAND chips */
extern struct spi_flash *flash;
extern const char version_string[];
#ifdef CONFIG_MRVL_MMC
int mrvl_mmc_initialize(bd_t *bis);
#endif
#ifdef MV_NAND_BOOT
extern MV_U32 nandEnvBase;
#endif
DECLARE_GLOBAL_DATA_PTR;
void mv_print_map(void)
{
#ifdef DB_78X60_PCAC
return 0;
#endif
printf("\nMap: Code:\t\t\t0x%08x:0x%08x\n", (unsigned int)gd->reloc_off, (unsigned int)(gd->reloc_off + _bss_start_ofs));
printf(" BSS:\t\t\t0x%08x\n", (unsigned int)(gd->reloc_off + _bss_end_ofs));
printf(" Stack:\t\t\t0x%08x\n", (unsigned int)gd->start_addr_sp);
#if defined(MV_INCLUDE_MONT_EXT)
int add;
if (!enaMonExt()) {
add = MV_PT_BASE(whoAmI());
printf(" PageTable:\t0x%08x\n", add);
}
#endif
printf(" Heap:\t\t\t0x%08x:0x%08x\n", (unsigned int)(gd->relocaddr - TOTAL_MALLOC_LEN), (unsigned int)gd->relocaddr);
printf(" U-Boot Environment:\t0x%08x:0x%08x ", CONFIG_ENV_OFFSET, CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE);
#ifdef MV_NAND_BOOT
printf("(NAND)\n\n");
#elif defined(MV_SPI_BOOT)
printf("(SPI)\n\n");
#endif
}
void print_mvBanner(void)
{
#ifdef CONFIG_SILENT_CONSOLE
DECLARE_GLOBAL_DATA_PTR;
gd->flags |= GD_FLG_SILENT;
#endif
printf("\n");
printf(" __ __ _ _\n");
printf("| \\/ | __ _ _ ____ _____| | |\n");
printf("| |\\/| |/ _` | '__\\ \\ / / _ \\ | |\n");
printf("| | | | (_| | | \\ V / __/ | |\n");
printf("|_| |_|\\__,_|_| \\_/ \\___|_|_|\n");
printf(" _ _ ____ _\n");
printf(" | | | | | __ ) ___ ___ | |_ \n");
printf(" | | | |___| _ \\ / _ \\ / _ \\| __| \n");
printf(" | |_| |___| |_) | (_) | (_) | |_ \n");
printf(" \\___/ |____/ \\___/ \\___/ \\__| \n");
#if defined(MV_INCLUDE_MONT_EXT)
if (!enaMonExt())
printf(" ** LOADER **\n");
else
printf(" ** MONITOR **\n");
#else
printf(" ** LOADER **\n");
#endif /* MV_INCLUDE_MONT_EXT */
return;
}
void maskAllInt(void)
{
int i;
/* for all interrupts (0-115) reset bit 0:3 and 8:11 to disable IRQ and FIQ */
for (i = 0; i < MV_IRQ_NR; i++)
MV_REG_WRITE(CPU_INT_SOURCE_CONTROL_REG(i), MV_REG_READ(CPU_INT_SOURCE_CONTROL_REG(i)) & ~(0xF0F));
}
/*******************************************************************************
* enable_caches - Platform hook for enabling caches
*
* DESCRIPTION: This function is called by main u-boot init function
* If caches are required they can be enabled here. Currently
* this is a stub doing nothing
* INPUT:
* None
* OUTPUT:
* None
* RETURN:
* None
*******************************************************************************/
void enable_caches(void)
{
/* Nothing */
}
void misc_init_r_dec_win(void)
{
char *env;
#if defined(MV_INCLUDE_USB)
mvSysUsbInit(); /* initialize USB2.0 / USB3.0 */
#endif
#if defined(MV_INCLUDE_XOR)
mvSysXorInit();
#endif
#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
env = getenv("enaClockGating");
if ((strcmp(env, "yes") == 0) || (strcmp(env, "Yes") == 0))
mv_set_power_scheme();
#endif
}
/*
* Miscellaneous platform dependent initializations
*/
extern MV_STATUS mvEthPhyRegRead(MV_U32 phyAddr, MV_U32 regOffs, MV_U16 *data);
extern MV_STATUS mvEthPhyRegWrite(MV_U32 phyAddr, MV_U32 regOffs, MV_U16 data);
/* golabal mac address for yukon EC */
unsigned char yuk_enetaddr[6];
extern int timer_init(void);
extern void i2c_init(int speed, int slaveaddr);
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
if (whoAmI() != 0)
return 0;
#if defined(MV_INCLUDE_TWSI)
MV_TWSI_ADDR slave;
#endif
unsigned int i;
maskAllInt();
/* Init the Board environment module (device bank params init) */
mvBoardEnvInit();
#if defined(MV_INCLUDE_TWSI)
slave.type = ADDR7_BIT;
slave.address = 0;
mvTwsiInit(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_TCLK, &slave, 0);
#endif
/* Init the Controlloer environment module (MPP init) */
mvCtrlEnvInit();
#if defined(CONFIG_DISPLAY_CPUINFO)
late_print_cpuinfo(); /* display cpu info (and speed) */
#endif
mvBoardDebugLed(2);
mvCpuIfInit(mvCpuAddrWinMap);
#ifdef MV_NOR_BOOT
env_init();
#endif
/* Init the GPIO sub-system */
MV_GPP_HAL_DATA gppHalData;
gppHalData.ctrlRev = mvCtrlRevGet();
mvGppInit(&gppHalData);
gd->bd->bi_arch_number = 528;
gd->bd->bi_boot_params = 0x00000100;
/* relocate the exception vectors */
/* U-Boot is running from DRAM at this stage */
for (i = 0; i < 0x100; i += 4)
*(unsigned int*)(0x0 + i) =
*(unsigned int*)(CONFIG_SYS_TEXT_BASE + i);
mvBoardDebugLed(4);
return 0;
}
void misc_init_r_env(void)
{
char *env;
char tmp_buf[10];
unsigned int malloc_len;
env = getenv("console");
if (!env)
setenv("console", "console=ttyS0,115200");
env = getenv("mtdids");
if (!env) {
#if defined(MV_NAND) && defined(MV_INCLUDE_SPI)
setenv("mtdids", "nand0=armada-nand,spi0=spi_flash");
#elif defined(MV_NAND)
setenv("mtdids", "nand0=armada-nand");
#elif defined(MV_INCLUDE_SPI)
setenv("mtdids", "spi0=spi_flash");
#endif
}
env = getenv("mtdparts");
if (!env) {
#if defined(MV_NAND) && defined(MV_INCLUDE_SPI)
setenv("mtdparts", "'mtdparts=armada-nand:8m(boot)ro,8m@8m(kernel),-(rootfs);mtdparts=spi_flash:4m(boot),-(spi-rootfs)'");
#elif defined(MV_NAND)
setenv("mtdparts", "mtdparts=armada-nand:8m(boot)ro,8m@8m(kernel),-(rootfs)");
#elif defined(MV_INCLUDE_SPI)
setenv("mtdparts", "mtdparts=spi_flash:4m(boot),-(spi-rootfs)");
#endif
}
env = getenv("nandEcc");
if (!env) {
#if defined(MV_NAND)
MV_NFC_ECC_MODE nandEccMode = mvBoardNandECCModeGet();
switch (nandEccMode) {
case MV_NFC_ECC_BCH_1K: /* 8 bit */
setenv("nandEcc", "nfcConfig=8bitecc");
break;
case MV_NFC_ECC_BCH_704B: /* 12 bit */
setenv("nandEcc", "nfcConfig=12bitecc");
break;
case MV_NFC_ECC_BCH_512B: /* 16 bit */
setenv("nandEcc", "nfcConfig=16bitecc");
break;
case MV_NFC_ECC_BCH_2K: /* 4 bit */
default:
setenv("nandEcc", "nfcConfig=4bitecc");
break;
}
#endif
}
/* update the CASset env parameter */
env = getenv("CASset");
if (!env) {
#ifdef MV_MIN_CAL
setenv("CASset", "min");
#else
setenv("CASset", "max");
#endif
}
/* Monitor extension */
#ifdef MV_INCLUDE_MONT_EXT
env = getenv("enaMonExt");
if (/* !env || */ ( (strcmp(env, "yes") == 0) || (strcmp(env, "Yes") == 0) ) )
setenv("enaMonExt", "yes");
else
#endif
setenv("enaMonExt", "no");
/* CPU streaming */
env = getenv("enaCpuStream");
if (!env || ( (strcmp(env, "no") == 0) || (strcmp(env, "No") == 0) ) )
setenv("enaCpuStream", "no");
else
setenv("enaCpuStream", "yes");
/* Clock Gating */
#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
env = getenv("enaClockGating");
if (!env || ( (strcmp(env, "no") == 0) || (strcmp(env, "No") == 0) ) )
setenv("enaClockGating", "no");
else
setenv("enaClockGating", "yes");
#endif
/* Write allocation */
env = getenv("enaWrAllo");
if ( !env || ( ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0) )))
setenv("enaWrAllo", "no");
else
setenv("enaWrAllo", "yes");
/* Pex mode */
env = getenv("pexMode");
if ( env && ( ((strcmp(env, "EP") == 0) || (strcmp(env, "ep") == 0) )))
setenv("pexMode", "EP");
else
setenv("pexMode", "RC");
env = getenv("MPmode");
if (!env || ( (strcmp(env, "smp") == 0) || (strcmp(env, "SMP") == 0) ) )
setenv("MPmode", "SMP");
else
setenv("MPmode", "AMP");
/* Make address 0x80000000-0x8fffffff shared (set 'S' in pgd) */
env = getenv("cacheShare");
if ( !env || ( ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0) )))
setenv("cacheShare", "no");
else
setenv("cacheShare", "yes");
env = getenv("enaFPU");
if (env && ((strcmp(env, "no") == 0) || (strcmp(env, "no") == 0)))
setenv("enaFPU", "no");
else
setenv("enaFPU", "yes");
env = getenv("sata_dma_mode");
if ( env && ((strcmp(env, "No") == 0) || (strcmp(env, "no") == 0) ) )
setenv("sata_dma_mode", "no");
else
setenv("sata_dma_mode", "yes");
env = getenv("sata_delay_reset");
if (!env)
setenv("sata_delay_reset", "0");
/* Malloc length */
env = getenv("MALLOC_len");
if (env)
malloc_len = simple_strtoul(env, NULL, 10) << 20;
else
malloc_len = 0;
if (malloc_len == 0) {
sprintf(tmp_buf, "%d", CONFIG_SYS_MALLOC_LEN >> 20);
setenv("MALLOC_len", tmp_buf);
}
/* primary network interface */
env = getenv("ethprime");
if (!env)
setenv("ethprime", ENV_ETH_PRIME);
/* image/script addr */
#if defined (CONFIG_CMD_STAGE_BOOT)
env = getenv("fdt_addr");
if (!env)
setenv("fdt_addr", "2040000");
env = getenv("kernel_addr_r");
if (!env)
setenv("kernel_addr_r", "2080000");
env = getenv("ramdisk_addr_r");
if (!env)
setenv("ramdisk_addr_r", "2880000");
env = getenv("device_partition");
if (!env)
setenv("device_partition", "0:1");
env = getenv("boot_order");
if (!env)
setenv("boot_order", "hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr");
env = getenv("script_name");
if (!env)
setenv("script_name", "boot.scr");
env = getenv("ide_path");
if (!env)
setenv("ide_path", "/");
env = getenv("script_addr_r");
if (!env)
setenv("script_addr_r", "3000000");
env = getenv("bootargs_dflt");
if (!env)
setenv("bootargs_dflt", "$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath "
"ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params "
"clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel");
env = getenv("bootcmd_auto");
if (!env)
setenv("bootcmd_auto", "stage_boot $boot_order");
env = getenv("bootcmd_lgcy");
if (!env)
setenv("bootcmd_lgcy", "tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000; ");
#endif
env = getenv("pxe_files_load");
if (!env)
setenv("pxe_files_load", ":default.arm-armadaxp-db:default.arm-armadaxp:default.arm");
env = getenv("pxefile_addr_r");
if (!env)
setenv("pxefile_addr_r", "3100000");
env = getenv("initrd_name");
if (!env)
setenv("initrd_name", "uInitrd");
#ifdef CONFIG_CMD_SOURCE
env = getenv("run_script");
if (!env)
setenv("run_script", "no");
#endif
/* netbsd boot arguments */
env = getenv("netbsd_en");
if ( !env || ( ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0) )))
setenv("netbsd_en", "no");
else {
setenv("netbsd_en", "yes");
env = getenv("netbsd_gw");
if (!env)
setenv("netbsd_gw", "192.168.0.254");
env = getenv("netbsd_mask");
if (!env)
setenv("netbsd_mask", "255.255.255.0");
env = getenv("netbsd_fs");
if (!env)
setenv("netbsd_fs", "nfs");
env = getenv("netbsd_server");
if (!env)
setenv("netbsd_server", "192.168.0.1");
env = getenv("netbsd_ip");
if (!env) {
env = getenv("ipaddr");
setenv("netbsd_ip", env);
}
env = getenv("netbsd_rootdev");
if (!env)
setenv("netbsd_rootdev", "mgi0");
env = getenv("netbsd_add");
if (!env)
setenv("netbsd_add", "0x800000");
env = getenv("netbsd_get");
if (!env)
setenv("netbsd_get", "tftpboot $netbsd_add $image_name");
#if defined(MV_INC_BOARD_QD_SWITCH)
env = getenv("netbsd_netconfig");
if (!env)
setenv("netbsd_netconfig", "mv_net_config=<((mgi0,00:00:11:22:33:44,0)"
"(mgi1,00:00:11:22:33:55,1:2:3:4)),mtu=1500>");
#endif
env = getenv("netbsd_set_args");
if (!env)
setenv("netbsd_set_args", "setenv bootargs nfsroot=$netbsd_server:$rootpath fs=$netbsd_fs "
"ip=$netbsd_ip serverip=$netbsd_server mask=$netbsd_mask gw=$netbsd_gw rootdev=$netbsd_rootdev "
"ethaddr=$ethaddr eth1addr=$eth1addr ethmtu=$ethmtu eth1mtu=$eth1mtu $netbsd_netconfig");
env = getenv("netbsd_boot");
if (!env)
setenv("netbsd_boot", "bootm $netbsd_add $bootargs");
env = getenv("netbsd_bootcmd");
if (!env)
setenv("netbsd_bootcmd", "run netbsd_get ; run netbsd_set_args ; run netbsd_boot");
}
/* vxWorks boot arguments */
env = getenv("vxworks_en");
if ( !env || ( ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0) )))
setenv("vxworks_en", "no");
else {
char* buff = (char*)0x1100;
setenv("vxworks_en", "yes");
sprintf(buff, "mgi(0,0) host:vxWorks.st");
env = getenv("serverip");
strcat(buff, " h=");
strcat(buff, env);
env = getenv("ipaddr");
strcat(buff, " e=");
strcat(buff, env);
strcat(buff, ":ffff0000 u=anonymous pw=target ");
setenv("vxWorks_bootargs", buff);
setenv("bootaddr", "0x1100");
}
/* linux boot arguments */
env = getenv("bootargs_root");
if (!env)
setenv("bootargs_root", "root=/dev/nfs rw");
/* For open Linux we set boot args differently */
env = getenv("mainlineLinux");
if (env && ((strcmp(env, "yes") == 0) || (strcmp(env, "Yes") == 0))) {
env = getenv("bootargs_end");
if (!env)
setenv("bootargs_end", ":::orion:eth0:none");
} else {
env = getenv("bootargs_end");
if (!env)
#if defined(MV_INC_BOARD_QD_SWITCH)
setenv("bootargs_end", MV_BOOTARGS_END_SWITCH);
#else
setenv("bootargs_end", MV_BOOTARGS_END);
#endif
}
env = getenv("image_name");
if (!env)
setenv("image_name", "uImage");
#if CONFIG_AMP_SUPPORT
env = getenv("amp_enable");
if (!env || ( ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0) )))
setenv("amp_enable", "no");
else{
env = getenv("amp_groups");
if (!env)
setenv("amp_groups", "0");
env = getenv("amp_shared_mem");
if (!env)
setenv("amp_shared_mem", "0x80000000:0x100000");
setenv("bootcmd", "amp_boot");
env = getenv("amp_verify_boot");
if (!env)
setenv("amp_verify_boot", "yes");
}
#endif
#ifdef CONFIG_ARM_LPAE
/* LPAE support */
env = getenv("enaLPAE");
if (!env)
setenv("enaLPAE", "no");
#endif
/* Flatten Device Tree environment setup */
#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
fdt_env_setup("armada-375.dtb", MV_FALSE); /* static setup: Skip DT update for customer - */
#else
fdt_env_setup("armada-375-db.dtb", MV_TRUE); /* dynamic setup: run DT update for customer - */
#endif
#if (CONFIG_BOOTDELAY >= 0)
env = getenv("bootcmd");
if (!env)
#if defined(CONFIG_OF_LIBFDT_IS_DEFAULT) && defined(CONFIG_OF_LIBFDT)
setenv("bootcmd",bootcmd_fdt);
#elif defined(CONFIG_CMD_STAGE_BOOT)
// setenv("bootcmd","stage_boot $boot_order");
// Temporary workaround till stage_boot gets stable.
setenv("bootcmd", "tftpboot 0x2000000 $image_name;"
"setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath "
"ip=$ipaddr:$serverip$bootargs_end video=dovefb:lcd0:$lcd0_params "
"clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootm $loadaddr; ");
#elif defined(MV_INCLUDE_TDM) || defined(MV_INC_BOARD_QD_SWITCH)
setenv("bootcmd", "tftpboot 0x2000000 $image_name;"
"setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath "
"ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params "
"clcd.lcd0_enable=$(lcd0_enable) clcd.lcd_panel=$lcd_panel; bootm $loadaddr; ");
#else
setenv("bootcmd", "tftpboot 0x2000000 $image_name;"
"setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath "
"ip=$ipaddr:$serverip$bootargs_end video=dovefb:lcd0:$lcd0_params "
"clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootm $loadaddr; ");
#endif
#endif /* (CONFIG_BOOTDELAY >= 0) */
env = getenv("standalone");
if (!env)
#if defined(MV_INCLUDE_TDM) && defined(MV_INC_BOARD_QD_SWITCH)
setenv("standalone", "fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts "
"root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end $mvNetConfig; bootm 0x2000000;");
#elif defined(MV_INC_BOARD_QD_SWITCH)
setenv("standalone", "fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts "
"root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end $mvNetConfig; bootm 0x2000000;");
#elif defined(MV_INCLUDE_TDM)
setenv("standalone", "fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts "
"root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;");
#else
setenv("standalone", "fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts "
"root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;");
#endif
/* Set boodelay to 3 sec, if Monitor extension are disabled */
if (!enaMonExt())
setenv("disaMvPnp", "no");
/* Disable PNP config of Marvell memory controller devices. */
env = getenv("disaMvPnp");
if (!env)
setenv("disaMvPnp", "no");
env = getenv("bootdelay");
if (!env)
setenv("bootdelay", "3");
#if (defined(MV_INCLUDE_GIG_ETH) || defined(MV_INCLUDE_UNM_ETH))
/* Generate random ip and mac address */
unsigned int xi = 0x1, xj = 0x2, xk = 0x3, xl = 0x4;
char ethaddr_0[30];
char ethaddr_1[30];
char ethaddr_2[30];
char ethaddr_3[30];
char pon_addr[30];
#if defined(MV_INCLUDE_RTC)
/* Read RTC to create pseudo-random data for enc */
struct rtc_time tm;
rtc_get(&tm);
/*convert RTC values to unsigned: ensure positive values (originally kept in int variables) */
unsigned int day = tm.tm_mday, sec = tm.tm_sec, min = tm.tm_min, hour = tm.tm_hour;
xi = ((day + sec) % 254);
/* No valid ip with one of the fileds has the value 0 */
if (xi == 0)
xi += 2;
xj = ((day + min) % 254);
/* No valid ip with one of the fileds has the value 0 */
if (xj == 0)
xj += 2;
/* Check if the ip address is the same as the server ip */
if ((xj == 1) && (xi == 11))
xi += 2;
xk = (min * sec) % 254;
xl = (hour * sec) % 254;
#endif /* defined(MV_INCLUDE_RTC) */
sprintf(ethaddr_0, "00:50:43:%02x:%02x:%02x", xk, xi, xj);
sprintf(ethaddr_1, "00:50:43:%02x:%02x:%02x", xl, xi, xj);
sprintf(ethaddr_2, "00:50:43:%02x:%02x:%02x", xl, xk, xj);
sprintf(ethaddr_3, "00:50:43:%02x:%02x:%02x", xi, xk, xl);
sprintf(pon_addr, "00:50:43:%02x:%02x:%02x", xj, xk, xl);
/* MAC addresses */
env = getenv("ethaddr");
if (!env)
setenv("ethaddr", ethaddr_0);
env = getenv("eth1addr");
if (!env)
setenv("eth1addr", ethaddr_1);
env = getenv("eth2addr");
if (!env)
setenv("eth2addr", ethaddr_2);
env = getenv("eth3addr");
if (!env)
setenv("eth3addr", ethaddr_3);
env = getenv("mv_pon_addr");
if (!env)
setenv("mv_pon_addr", pon_addr);
env = getenv("ethmtu");
if (!env)
setenv("ethmtu", "1500");
env = getenv("eth1mtu");
if (!env)
setenv("eth1mtu", "1500");
env = getenv("eth2mtu");
if (!env)
setenv("eth2mtu", "1500");
env = getenv("eth3mtu");
if (!env)
setenv("eth3mtu", "1500");
/* Set mvNetConfig env parameter */
env = getenv("mvNetConfig");
if (!env)
setenv("mvNetConfig", "mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500");
#endif /* (MV_INCLUDE_GIG_ETH) || defined(MV_INCLUDE_UNM_ETH) */
#if defined(MV_INCLUDE_USB)
/* USB Host */
env = getenv("usb0Mode");
if (!env)
setenv("usb0Mode", ENV_USB0_MODE);
env = getenv("usbActive");
if (!env)
setenv("usbActive", ENV_USB_ACTIVE);
env = getenv("usbType");
if (!env)
setenv("usbType", ENV_USB_MODE);
#endif /* (MV_INCLUDE_USB) */
#if defined(YUK_ETHADDR)
env = getenv("yuk_ethaddr");
if (!env)
setenv("yuk_ethaddr", YUK_ETHADDR);
{
int i;
char *tmp = getenv("yuk_ethaddr");
char *end;
for (i = 0; i < 6; i++) {
yuk_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
if (tmp)
tmp = (*end) ? end + 1 : end;
}
}
#endif /* defined(YUK_ETHADDR) */
#if defined(CONFIG_CMD_RCVR)
env = getenv("netretry");
if (!env)
setenv("netretry", "no");
env = getenv("loadaddr");
if (!env)
setenv("loadaddr", RCVR_LOAD_ADDR);
env = getenv("autoload");
if (!env)
setenv("autoload", "no");
#endif
env = getenv("eeeEnable");
if (!env)
setenv("eeeEnable", "no");
env = getenv("lcd0_enable");
if (!env)
setenv("lcd0_enable", "0");
env = getenv("lcd0_params");
if (!env)
setenv("lcd0_params", "640x480-16@60");
env = getenv("lcd_panel");
if (!env)
setenv("lcd_panel", "0");
return;
}
#define MV_CPU_SW_RESET_CONTROL(cpu) (0x20800 + ((cpu) * 0x8))
#define AXP_CPU_DIVCLK_CTRL0 0x18700
#define AXP_CPU_DIVCLK_CTRL2_RATIO_FULL0 0x18708
#define AXP_CPU_DIVCLK_CTRL2_RATIO_FULL1 0x1870C
void kick_next(void)
{
int cpuNum;
unsigned int divider;
unsigned int val;
unsigned int reg;
if (whoAmI() == 0) {
MV_REG_WRITE(0x20988, 0x0);
MV_REG_WRITE(0x22224, 0x600000);
MV_REG_WRITE(0x22324, 0x600000);
MV_REG_WRITE(0x22424, 0x600000);
MV_REG_WRITE(0x22424, 0x600000);
MV_REG_WRITE(0x200b8, 0x07ff1d11);
/* set the scondary CPUs ratio to MAX freq*/
divider = (MV_REG_READ(AXP_CPU_DIVCLK_CTRL2_RATIO_FULL1) & 0x3F);
val = MV_REG_READ(AXP_CPU_DIVCLK_CTRL2_RATIO_FULL1);
val &= ~(0xFFFFFF00); /* clear cpu1-3 ratio */
val |= ((divider << 8) | (divider << 16) | (divider << 24));
MV_REG_WRITE(AXP_CPU_DIVCLK_CTRL2_RATIO_FULL1, val);
val = MV_REG_READ(AXP_CPU_DIVCLK_CTRL0);
val |= (0x7 << 21);
MV_REG_WRITE(AXP_CPU_DIVCLK_CTRL0, val);
/* Request clock devider reload */
val = MV_REG_READ(AXP_CPU_DIVCLK_CTRL0);
val |= 1 << 24;
MV_REG_WRITE(AXP_CPU_DIVCLK_CTRL0, val);
/* Wait for clocks to settle down then release reload request */
udelay(1000);
val &= ~(0xf << 21);
MV_REG_WRITE(AXP_CPU_DIVCLK_CTRL0, val);
udelay(1000);
}
cpuNum = mvBoardCpuCoresNumGet() == 2 ? (mvBoardCpuCoresNumGet() - 1) : (mvBoardCpuCoresNumGet());
if (whoAmI() < cpuNum) {
reg = MV_REG_READ((MV_CPU_SW_RESET_CONTROL(whoAmI() + 1)));
reg &= 0xFFFFFFFE;
MV_REG_WRITE(MV_CPU_SW_RESET_CONTROL(whoAmI() + 1), reg);
udelay(1000000);
}
}
#ifdef BOARD_LATE_INIT
int board_late_init(void)
{
char *env;
env = getenv("enaMP");
if (env && ((strcmp(env, "yes") == 0) || (strcmp(env, "Yes") == 0)))
kick_next();
mvBoardDebugLed(0);
return 0;
}
#endif
void pcie_tune(void)
{
MV_REG_WRITE(0xF1041AB0, 0x100);
MV_REG_WRITE(0xF1041A20, 0x78000801);
MV_REG_WRITE(0xF1041A00, 0x4014022F);
MV_REG_WRITE(0xF1040070, 0x18110008);
}
int board_eth_init(bd_t *bis)
{
#if defined(MV_INCLUDE_GIG_ETH) || defined(MV_INCLUDE_UNM_ETH)
/* move to the begining so in case we have a PCI NIC it will
read the env mac addresses correctlly. */
mv_eth_initialize(bis);
#endif
#if defined(CONFIG_SK98)
skge_initialize(bis);
#endif
#if defined(CONFIG_E1000)
e1000_initialize(bis);
#endif
#ifdef CONFIG_EEPRO100
eepro100_initialize(bis);
#endif
return 0;
}
#ifdef CONFIG_MMC
int board_mmc_init(bd_t *bis)
{
#ifdef CONFIG_MRVL_MMC
mrvl_mmc_initialize(bis);
#endif
return 0;
}
#endif
/*
* print_cpuinfo - original U-Boot print function - used before code relocation
*
* DESCRIPTION:
* This function is called by board_init_f (before code relocation).
* no actual print is done here, due to global variables limitations (bss).
* after code relocation, we can start using global variables and print board information.
*/
int print_cpuinfo(void)
{
return 0;
}
/*
* late_print_cpuinfo - marvell U-Boot print function - used after code relocation
*
* DESCRIPTION:
* This function is called by board_init_r (after code relocation).
* all global variables limitations(bss) are off at this state
*/
int late_print_cpuinfo(void)
{
char name[50];
mvCtrlUpdatePexId();
mvBoardNameGet(name,50);
printf("Board: %s\n", name);
mvCtrlModelRevNameGet(name);
printf("SoC: %s\n", name);
printf(" running %d CPUs\n", mvCtrlGetCpuNum() + 1);
if (!mvCtrlIsValidSatR())
printf(" Custom configuration\n");
mvCpuNameGet(name);
printf("CPU: %s", name);
#ifdef MV_CPU_LE
printf(" LE\n");
#else
printf(" BE\n");
#endif
printf(" CPU %d\n", whoAmI());
printf(" CPU @ %d [MHz]\n", mvCpuPclkGet()/1000000);
printf(" L2 @ %d [MHz]\n", mvCpuL2ClkGet()/1000000);
printf(" TClock @ %d [MHz]\n", mvTclkGet()/1000000);
printf(" DDR @ %d [MHz]\n", CONFIG_SYS_BUS_CLK/1000000);
printf(" DDR %dBit Width, %s Memory Access, DLB %s\n",
mvCtrlDDRBudWidth(), mvCtrlDDRThruXbar() ? "XBAR" : "FastPath",
mvCtrlIsDLBEnabled() ? "Enabled" : "Disabled");
display_dram_config(1);
return 0;
}
int misc_init_r(void)
{
mvBoardDebugLed(5);
/* init special env variables */
misc_init_r_env();
#ifdef CONFIG_AMP_SUPPORT
amp_init();
#endif
mv_cpu_init();
#if defined(MV_INCLUDE_MONT_EXT)
if (enaMonExt()) {
printf("Marvell monitor extension:\n");
mon_extension_after_relloc();
}
#endif
/* init the units decode windows */
misc_init_r_dec_win();
mv_print_map();
memset((void*)CONFIG_SYS_LOAD_ADDR, 0, CONFIG_SYS_MIN_HDR_DEL_SIZE);
mvBoardDebugLed(6);
mvBoardMppModuleTypePrint();
mvBoardOtherModuleTypePrint();
mvBoardDebugLed(7);
char *env;
/* pcie fine tunning */
env = getenv("pcieTune");
if (env && ((strcmp(env, "yes") == 0) || (strcmp(env, "yes") == 0)))
pcie_tune();
else
setenv("pcieTune", "no");
#if defined(MV_INCLUDE_UNM_ETH) || defined(MV_INCLUDE_GIG_ETH)
mvBoardEgigaPhyInit();
#endif
#ifdef CONFIG_CMD_SOURCE
/* run saved script */
env = getenv("run_script");
if (env && strcmp(env, "yes") == 0)
run_command("mvsource run", 0);
#endif
return 0;
}
MV_U32 mvTclkGet(void)
{
DECLARE_GLOBAL_DATA_PTR;
/* get it only on first time */
if (gd->tclk == 0)
gd->tclk = mvBoardTclkGet();
return gd->tclk;
}
MV_U32 mvSysClkGet(void)
{
DECLARE_GLOBAL_DATA_PTR;
/* get it only on first time */
if (gd->bus_clk == 0)
gd->bus_clk = mvBoardSysClkGet();
return gd->bus_clk;
}
void reset_cpu(ulong addr)
{
mvBoardReset();
}
void mv_cpu_init(void)
{
#if 0
char *env;
volatile unsigned int temp;
/* enable access to CP10 and CP11 */
temp = 0x00f00000;
__asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 2" :: "r" (temp));
env = getenv("enaFPU");
if (env && ((strcmp(env, "yes") == 0) || (strcmp(env, "Yes") == 0))) {
/* init and Enable FPU to Run Fast Mode */
printf("FPU initialized to Run Fast Mode.\n");
/* Enable */
temp = FPEXC_ENABLE;
fmxr(FPEXC, temp);
/* Run Fast Mode */
temp = fmrx(FPSCR);
temp |= (FPSCR_DEFAULT_NAN | FPSCR_FLUSHTOZERO);
fmxr(FPSCR, temp);
} else {
printf("FPU not initialized\n");
/* Disable */
temp = fmrx(FPEXC);
temp &= ~FPEXC_ENABLE;
fmxr(FPEXC, temp);
}
__asm__ __volatile__ ("mrc p15, 1, %0, c15, c1, 2" : "=r" (temp));
temp |= (BIT25 | BIT27 | BIT29 | BIT30);
/* removed BIT23 in order to enable fast LDR bypass */
__asm__ __volatile__ ("mcr p15, 1, %0, c15, c1, 2\n" \
"mcr p15, 0, %0, c7, c5, 4" : : "r" (temp)); /*imb*/
/* Multi-CPU managment */
env = getenv("enaMP");
if ( env && ((strcmp(env, "yes") == 0) || (strcmp(env, "Yes") == 0)) ) {
env = getenv("MPmode");
if ( env && ((strcmp(env, "AMP") == 0) || (strcmp(env, "amp") == 0)) ) {
/* Set AMP in Auxilary control register */
__asm__ __volatile__ ("mrc p15, 0, %0, c1, c0, 1" : "=r" (temp));
temp &= ~(0x1 << 5);
__asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 1\n" \
"mcr p15, 0, %0, c7, c5, 4" : : "r" (temp)); /* imb */
/* Set AMP in Auxiliary Funcional Modes Control register */
__asm__ __volatile__ ("mrc p15, 1, %0, c15, c2, 0" : "=r" (temp));
temp &= ~(0x1 << 1);
__asm__ __volatile__ ("mcr p15, 1, %0, c15, c2, 0\n" \
"mcr p15, 0, %0, c7, c5, 4" : : "r" (temp)); /* imb */
}else {
/* Set SMP in Auxilary control register */
__asm__ __volatile__ ("mrc p15, 0, %0, c1, c0, 1" : "=r" (temp));
temp |= (0x1 << 5);
__asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 1\n" \
"mcr p15, 0, %0, c7, c5, 4" : : "r" (temp)); /* imb */
/* Set SMP in Auxiliary Funcional Modes Control register */
__asm__ __volatile__ ("mrc p15, 1, %0, c15, c2, 0" : "=r" (temp));
temp |= (0x1 << 1);
__asm__ __volatile__ ("mcr p15, 1, %0, c15, c2, 0\n" \
"mcr p15, 0, %0, c7, c5, 4" : : "r" (temp)); /* imb */
/* Enable CPU respond to coherency fabric requests */
/* Assaf: Note must be enabled for IO coherency as well */
MV_REG_BIT_SET(SOC_COHERENCY_FABRIC_CTRL_REG, (0x1 << (24 + whoAmI())));
/* Configure all Cores to be in SMP Group0 */
MV_REG_BIT_SET(SOC_COHERENCY_FABRIC_CFG_REG, (0x1 << (24 + whoAmI())));
/* In loader mode, set fabric regs for both CPUs.*/
env = getenv("enaMonExt");
if ( env && ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0)) ) {
/* Configure Core1 to be in SMP Group0 */
MV_REG_BIT_SET(SOC_COHERENCY_FABRIC_CFG_REG, (0x1 << 25));
}
/* Set number of CPUs=2 (for Linux) */
MV_REG_BIT_SET(SOC_COHERENCY_FABRIC_CFG_REG, 0x1);
}
}
/* Set L2C WT mode */
temp = MV_REG_READ(CPU_L2_AUX_CTRL_REG) & ~CL2ACR_WB_WT_ATTR_MASK;
env = getenv("setL2CacheWT");
if (!env || ((strcmp(env, "yes") == 0) || (strcmp(env, "Yes") == 0)))
temp |= CL2ACR_WB_WT_ATTR_WT;
/* Set L2 algorithm to semi_pLRU */
temp &= ~CL2ACR_REP_STRGY_MASK;
if (mvCtrlRevGet() == 1)
temp |= CL2ACR_REP_STRGY_semiPLRU_MASK;
else{
temp |= CL2ACR_REP_STRGY_semiPLRU_WA_MASK;
temp |= CL2_DUAL_EVICTION;
temp |= CL2_PARITY_ENABLE;
temp |= CL2_InvalEvicLineUCErr;
}
MV_REG_WRITE(CPU_L2_AUX_CTRL_REG, temp);
/* enable L2C */
temp = MV_REG_READ(CPU_L2_CTRL_REG);
env = getenv("disL2Cache");
if (!env || ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0)))
temp |= CL2CR_L2_EN_MASK;
else
temp &= ~CL2CR_L2_EN_MASK;
MV_REG_WRITE(CPU_L2_CTRL_REG, temp);
/* Configure L2 options if L2 exists */
if (MV_REG_READ(CPU_L2_CTRL_REG) & CL2CR_L2_EN_MASK) {
/* Read L2 Auxilary control register */
temp = MV_REG_READ(CPU_L2_AUX_CTRL_REG);
/* Clear fields */
temp &= ~(CL2ACR_WB_WT_ATTR_MASK | CL2ACR_FORCE_WA_MASK);
/* Set "Force write policy" field */
env = getenv("L2forceWrPolicy");
if ( env && ((strcmp(env, "WB") == 0) || (strcmp(env, "wb") == 0)) )
temp |= CL2ACR_WB_WT_ATTR_WB;
else if ( env && ((strcmp(env, "WT") == 0) || (strcmp(env, "wt") == 0)) )
temp |= CL2ACR_WB_WT_ATTR_WT;
else
temp |= CL2ACR_WB_WT_ATTR_PAGE;
/* Set "Force Write Allocate" field */
env = getenv("L2forceWrAlloc");
if ( env && ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0)) )
temp |= CL2ACR_FORCE_NO_WA;
else if ( env && ((strcmp(env, "yes") == 0) || (strcmp(env, "Yes") == 0)) )
temp |= CL2ACR_FORCE_WA;
else
temp |= CL2ACR_FORCE_WA_DISABLE;
/* Set "ECC" */
env = getenv("L2EccEnable");
if (!env || ( (strcmp(env, "no") == 0) || (strcmp(env, "No") == 0) ) )
temp &= ~CL2ACR_ECC_EN;
else
temp |= CL2ACR_ECC_EN;
/* Set other L2 configurations */
temp |= (CL2ACR_PARITY_EN | CL2ACR_INVAL_UCE_EN);
/* Set L2 algorithm to semi_pLRU */
temp &= ~CL2ACR_REP_STRGY_MASK;
temp |= CL2ACR_REP_STRGY_semiPLRU_MASK;
/* Write to L2 Auxilary control register */
MV_REG_WRITE(CPU_L2_AUX_CTRL_REG, temp);
env = getenv("L2SpeculativeRdEn");
if (env && ((strcmp(env, "no") == 0) || (strcmp(env, "No") == 0)) )
MV_REG_BIT_SET(0x20228, ((0x1 << 5)));
else
MV_REG_BIT_RESET(0x20228, ((0x1 << 5)));
}
/* Enable i cache */
asm ("mrc p15, 0, %0, c1, c0, 0" : "=r" (temp));
temp |= BIT12;
/* Change reset vector to address 0x0 */
temp &= ~BIT13;
asm ("mcr p15, 0, %0, c1, c0, 0\n" \
"mcr p15, 0, %0, c7, c5, 4" : : "r" (temp)); /* imb */
#endif
}
/* Set unit in power off mode acording to the detection of MPP/SERDES */
#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
void mv_set_power_scheme(void)
{
return;
}
#endif