| /******************************************************************************* |
| Copyright (C) Marvell International Ltd. and its affiliates |
| |
| This software file (the "File") is owned and distributed by Marvell |
| International Ltd. and/or its affiliates ("Marvell") under the following |
| alternative licensing terms. Once you have made an election to distribute the |
| File under one of the following license alternatives, please (i) delete this |
| introductory statement regarding license alternatives, (ii) delete the two |
| license alternatives that you have not elected to use and (iii) preserve the |
| Marvell copyright notice above. |
| |
| ******************************************************************************** |
| Marvell Commercial License Option |
| |
| If you received this File from Marvell and you have entered into a commercial |
| license agreement (a "Commercial License") with Marvell, the File is licensed |
| to you under the terms of the applicable Commercial License. |
| |
| ******************************************************************************** |
| Marvell GPL License Option |
| |
| If you received this File from Marvell, you may opt to use, redistribute and/or |
| modify this File in accordance with the terms and conditions of the General |
| Public License Version 2, June 1991 (the "GPL License"), a copy of which is |
| available along with the File in the license.txt file or by writing to the Free |
| Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or |
| on the worldwide web at http://www.gnu.org/licenses/gpl.txt. |
| |
| THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY |
| DISCLAIMED. The GPL License provides additional details about this warranty |
| disclaimer. |
| ******************************************************************************** |
| Marvell BSD License Option |
| |
| If you received this File from Marvell, you may opt to use, redistribute and/or |
| modify this File under the following licensing terms. |
| Redistribution and use in source and binary forms, with or without modification, |
| are permitted provided that the following conditions are met: |
| |
| * Redistributions of source code must retain the above copyright notice, |
| this list of conditions and the following disclaimer. |
| |
| * Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| |
| * Neither the name of Marvell nor the names of its contributors may be |
| used to endorse or promote products derived from this software without |
| specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR |
| ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| *******************************************************************************/ |
| |
| #ifndef __INCmvBoardEnvLibh |
| #define __INCmvBoardEnvLibh |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /* defines */ |
| /* The below constant macros defines the board I2C EEPROM data offsets */ |
| |
| #include "ctrlEnv/mvCtrlEnvLib.h" |
| #include "mvSysHwConfig.h" |
| #include "boardEnv/mvBoardEnvSpec.h" |
| #include "twsi/mvTwsi.h" |
| #include "nfc/mvNfc.h" |
| |
| #ifdef CONFIG_ARMADA_38X |
| #include "boardEnv/mvBoardEnvLib38x.h" |
| #elif defined CONFIG_ARMADA_39X |
| #include "boardEnv/mvBoardEnvLib39x.h" |
| #endif |
| |
| #define ARRSZ(x) (sizeof(x) / sizeof(x[0])) |
| #define BOARD_ETH_SWITCH_PORT_NUM 7 |
| #define BOARD_ETH_SWITCH_SMI_SCAN_MODE 1 /* Use manual scanning mode */ |
| #define MV_BOARD_MAX_MPP 59 /* number of MPP conf registers */ |
| #define MV_BOARD_MAX_MPP_GROUPS 9 |
| #define MV_BOARD_MPP_GROUPS_MAX_TYPES 8 |
| #define MV_BOARD_NAME_LEN 0x20 |
| #define MV_A38X_Z_REV_BOARDID_I2C_ADDR 0x50 |
| |
| typedef enum _devBoardOtherTypeClass { |
| MV_BOARD_NONE = 0x00000000, |
| MV_BOARD_SPDIF = 0x00000001, |
| MV_BOARD_I2S = 0x00000002, |
| MV_BOARD_TDM = 0x00000004, |
| MV_BOARD_MII = 0x00000008, |
| MV_BOARD_SGMII = 0x00000010, |
| MV_BOARD_SERDES_MUX = 0x00000020, |
| MV_BOARD_NOR = 0x00000040, |
| MV_BOARD_NAND16BIT = 0x00000080, |
| MV_BOARD_SDIO4BIT = 0x00000100, |
| MV_BOARD_UNKNOWN = 0x80000000 |
| } MV_BOARD_OTHER_TYPE_CLASS; |
| |
| |
| typedef enum _devBoardClass { |
| BOARD_DEV_NOR_FLASH, |
| BOARD_DEV_NAND_FLASH, |
| BOARD_DEV_SEVEN_SEG, |
| BOARD_DEV_FPGA, |
| BOARD_DEV_SRAM, |
| BOARD_DEV_SPI_FLASH, |
| BOARD_DEV_OTHER |
| } MV_BOARD_DEV_CLASS; |
| |
| typedef enum _devTwsiBoardClass { |
| BOARD_DEV_TWSI_SATR, |
| BOARD_TWSI_MODULE_DETECT, |
| BOARD_TWSI_IO_EXPANDER, |
| BOARD_DEV_TWSI_EEPROM, |
| BOARD_TWSI_OTHER |
| } MV_BOARD_TWSI_CLASS; |
| |
| typedef enum _devGppBoardClass { |
| BOARD_GPP_RTC, |
| BOARD_GPP_MV_SWITCH, |
| BOARD_GPP_USB_VBUS, |
| BOARD_GPP_USB_VBUS_EN, |
| BOARD_GPP_USB_OC, |
| BOARD_GPP_USB_HOST_DEVICE, |
| BOARD_GPP_REF_CLCK, |
| BOARD_GPP_VOIP_SLIC, |
| BOARD_GPP_LIFELINE, |
| BOARD_GPP_BUTTON, |
| BOARD_GPP_TS_BUTTON_C, |
| BOARD_GPP_TS_BUTTON_U, |
| BOARD_GPP_TS_BUTTON_D, |
| BOARD_GPP_TS_BUTTON_L, |
| BOARD_GPP_TS_BUTTON_R, |
| BOARD_GPP_POWER_BUTTON, |
| BOARD_GPP_RESTOR_BUTTON, |
| BOARD_GPP_WPS_BUTTON, |
| BOARD_GPP_HDD0_POWER, |
| BOARD_GPP_HDD1_POWER, |
| BOARD_GPP_FAN_POWER, |
| BOARD_GPP_RESET, |
| BOARD_GPP_POWER_ON_LED, |
| BOARD_GPP_HDD_POWER, |
| BOARD_GPP_SDIO_POWER, |
| BOARD_GPP_SDIO_DETECT, |
| BOARD_GPP_SDIO_WP, |
| BOARD_GPP_SWITCH_PHY_INT, |
| BOARD_GPP_TSU_DIRCTION, |
| BOARD_GPP_PEX_RESET, |
| BOARD_GPP_CONF, |
| BOARD_GPP_PON_XVR_TX, |
| BOARD_GPP_SYS_LED, |
| BOARD_GPP_PON_LED, |
| BOARD_GPP_OTHER |
| } MV_BOARD_GPP_CLASS; |
| |
| typedef enum _mvModuleTypeID { |
| MV_MODULE_NO_MODULE = 0x000, /* MII board SLM 1362 */ |
| MV_MODULE_MII = BIT0, /* MII board SLM 1362 */ |
| MV_MODULE_SLIC_TDM_DEVICE = BIT1, /* TDM board SLM 1360 */ |
| MV_MODULE_I2S_DEVICE = BIT2, /* I2S board SLM 1360 */ |
| MV_MODULE_SPDIF_DEVICE = BIT3, /* SPDIF board SLM 1360 */ |
| MV_MODULE_NOR = BIT4, /* NOR board SLM 1361 */ |
| MV_MODULE_NAND = BIT5, /* NAND board SLM 1361 */ |
| MV_MODULE_SDIO = BIT6, /* SDIO board SLM 1361 */ |
| MV_MODULE_SGMII = BIT7, /* SGMII board SLM 1364 */ |
| MV_MODULE_DB381_SGMII = BIT8, /* DB-381 SGMII SLM 1426 */ |
| MV_MODULE_SWITCH = BIT9,/* SWITCH board SLM 1375 */ |
| MV_MODULE_NAND_ON_BOARD = BIT10, /* ON board nand - detected via S@R bootsrc */ |
| MV_MODULE_DB381_MMC_8BIT_ON_BOARD = BIT11,/* ON board MMC 8bit - detected via S@R bootsrc */ |
| MV_MODULE_TYPE_MAX_MODULE = 10, |
| MV_MODULE_TYPE_MAX_OPTION = 11 |
| } MV_MODULE_TYPE_ID; |
| |
| typedef struct _devCsInfo { |
| MV_U8 deviceCS; |
| MV_U32 params; |
| MV_U32 devClass; /* MV_BOARD_DEV_CLASS */ |
| MV_U8 devWidth; |
| MV_U8 busWidth; |
| MV_U8 busNum; |
| MV_BOOL active; |
| } MV_DEV_CS_INFO; |
| |
| struct MV_BOARD_SWITCH_INFO { |
| MV_BOOL isEnabled; |
| MV_BOOL isCpuPortRgmii; |
| MV_32 switchIrq; |
| MV_32 switchPort[BOARD_ETH_SWITCH_PORT_NUM]; |
| MV_32 cpuPort; |
| MV_32 connectedPort[MV_ETH_MAX_PORTS]; |
| MV_32 smiScanMode; |
| MV_32 quadPhyAddr; |
| MV_U32 forceLinkMask; /* Bitmask of switch ports to have force link (1Gbps) */ |
| }; |
| |
| typedef enum _SatRstatus { |
| SATR_READ_ONLY = 0x01, |
| SATR_SWAP_BIT = 0x02, |
| } MV_BOARD_SATR_STATUS; |
| |
| typedef struct _boardLedInfo { |
| MV_U8 activeLedsNumber; |
| MV_U8 ledsPolarity; /* '0' or '1' to turn on led */ |
| MV_U8 *gppPinNum; /* Pointer to GPP values */ |
| } MV_BOARD_LED_INFO; |
| |
| typedef struct _boardGppInfo { |
| MV_BOARD_GPP_CLASS devClass; |
| MV_U8 gppPinNum; |
| } MV_BOARD_GPP_INFO; |
| |
| typedef enum _mvIoExpanderTypeID { |
| MV_IO_EXPANDER_USB_VBUS, |
| MV_IO_EXPANDER_MAX_OPTION |
| } MV_IO_EXPANDER_TYPE_ID; |
| |
| typedef struct _boardIoExapnderTypesInfo { |
| MV_IO_EXPANDER_TYPE_ID ioFieldid; |
| MV_U32 offset; |
| MV_U32 expanderNum; |
| MV_U32 regNum; |
| } MV_BOARD_IO_EXPANDER_TYPE_INFO; |
| |
| typedef struct _boardTwsiInfo { |
| MV_BOARD_TWSI_CLASS devClass; |
| MV_U8 devClassId; |
| MV_U8 twsiDevAddr; |
| MV_U8 twsiDevAddrType; |
| MV_U8 moreThen256; |
| } MV_BOARD_TWSI_INFO; |
| |
| typedef struct _boardSatrInfo { |
| char name[20]; |
| MV_SATR_TYPE_ID satrId; |
| MV_U32 mask; |
| MV_U32 bitOffset; |
| MV_U32 devClassId; |
| MV_U32 regOffset; |
| MV_U32 isActiveForBoard[MV_MARVELL_BOARD_NUM]; |
| MV_BOARD_SATR_STATUS status; |
| } MV_BOARD_SATR_INFO; |
| |
| typedef struct _moudleTypesInfo { |
| MV_MODULE_TYPE_ID configId; |
| MV_U32 twsiAddr; |
| MV_U32 offset; |
| MV_U32 twsiId; |
| MV_U32 isActiveForBoard[MV_MARVELL_BOARD_NUM]; |
| } MV_MODULE_TYPE_INFO; |
| |
| |
| typedef struct _boardMppInfo { |
| MV_U32 mppGroup[MV_BOARD_MAX_MPP]; |
| } MV_BOARD_MPP_INFO; |
| |
| typedef struct _boardNetComplexInfo { |
| MV_U32 netComplexOpt; |
| } MV_BOARD_NET_COMPLEX_INFO; |
| |
| typedef enum { |
| BOARD_EPON_CONFIG, |
| BOARD_GPON_CONFIG, |
| BOARD_PON_NONE, |
| BOARD_PON_AUTO |
| } MV_BOARD_PON_CONFIG; |
| |
| typedef struct { |
| MV_U8 spiCs; |
| } MV_BOARD_TDM_INFO; |
| |
| typedef struct _boardPexInfo { |
| MV_PEXIF_INDX pexMapping[MV_PEX_MAX_IF]; |
| MV_PEX_UNIT_CFG pexUnitCfg[MV_PEX_MAX_UNIT]; |
| MV_U32 boardPexIfNum; |
| } MV_BOARD_PEX_INFO; |
| |
| typedef enum _devBoardSlicType { |
| MV_BOARD_SLIC_DISABLED, |
| MV_BOARD_SLIC_SSI_ID, /* Lantiq Integrated SLIC */ |
| MV_BOARD_SLIC_ISI_ID, /* Silicon Labs ISI Bus */ |
| MV_BOARD_SLIC_ZSI_ID, /* Zarlink ZSI Bus */ |
| MV_BOARD_SLIC_EXTERNAL_ID /* Cross vendor external SLIC */ |
| } MV_BOARD_SLIC_TYPE; |
| |
| typedef struct { |
| MV_U8 spiId; |
| } MV_BOARD_TDM_SPI_INFO; |
| |
| typedef enum { |
| BOARD_SLIC_880 = 0, |
| BOARD_SLIC_792, |
| BOARD_SLIC_SSI, |
| BOARD_SLIC_ISI, |
| BOARD_SLIC_ZSI, |
| BOARD_TDM_SLIC_COUNT |
| } MV_BOARD_TDM_SLIC_TYPE; |
| |
| /* Board specific initialization. Performed before initializing the SoC. */ |
| typedef struct { |
| MV_U32 reg; |
| MV_U32 mask; |
| MV_U32 val; |
| } MV_BOARD_SPEC_INIT; |
| |
| struct MV_BOARD_IO_EXPANDER { |
| MV_U8 addr; |
| MV_U8 offset; |
| MV_U8 val; |
| }; |
| |
| typedef enum { |
| NAND_IF_NFC, |
| NAND_IF_SPI, |
| NAND_IF_NONE |
| } MV_NAND_IF_MODE; |
| |
| typedef struct { |
| MV_UNIT_ID usbType; |
| MV_U8 usbPortNum; |
| MV_BOOL isActive; |
| } MV_BOARD_USB_INFO; |
| |
| typedef struct _boardInfo { |
| char boardName[MV_BOARD_NAME_LEN]; |
| char compatibleDTName[MV_BOARD_NAME_LEN]; /* string for LSP Device Tree usage */ |
| MV_U8 numBoardNetComplexValue; |
| MV_BOARD_NET_COMPLEX_INFO *pBoardNetComplexInfo; |
| MV_U8 numBoardMppConfigValue; |
| MV_BOARD_MPP_INFO *pBoardMppConfigValue; |
| MV_U32 intsGppMaskLow; |
| MV_U32 intsGppMaskMid; |
| MV_U32 intsGppMaskHigh; |
| MV_U8 numBoardDeviceIf; |
| MV_DEV_CS_INFO *pDevCsInfo; |
| MV_U8 numBoardTwsiDev; |
| MV_BOARD_TWSI_INFO *pBoardTwsiDev; |
| MV_U8 numBoardMacInfo; |
| MV_BOARD_MAC_INFO *pBoardMacInfo; |
| MV_U8 numBoardGppInfo; |
| MV_BOARD_GPP_INFO *pBoardGppInfo; |
| MV_U8 numBoardIoExpPinInfo; |
| MV_BOARD_IO_EXPANDER_TYPE_INFO *pBoardIoExpPinInfo; |
| |
| MV_U8 activeLedsNumber; |
| MV_U8 *pLedGppPin; |
| MV_U8 ledsPolarity; /* '0' or '1' to turn on led */ |
| |
| MV_U8 pmuPwrUpPolarity; |
| MV_U32 pmuPwrUpDelay; |
| /* GPP values */ |
| MV_U32 gppOutEnValLow; |
| MV_U32 gppOutEnValMid; |
| MV_U32 gppOutEnValHigh; |
| MV_U32 gppOutValLow; |
| MV_U32 gppOutValMid; |
| MV_U32 gppOutValHigh; |
| MV_U32 gppPolarityValLow; |
| MV_U32 gppPolarityValMid; |
| MV_U32 gppPolarityValHigh; |
| |
| MV_BOARD_USB_INFO *pBoardUsbInfo; /* usb2.0 and usb3.0 physical port mapping on board */ |
| MV_U8 numBoardUsbInfo; |
| |
| /* PON configuration. */ |
| MV_BOARD_PON_CONFIG ponConfigValue; |
| /* TDM configuration: |
| * We hold a different configuration array for each possible slic that |
| * can be connected to board. |
| * When modules are scanned, then we select the index of the relevant |
| * slic's information array. |
| * For RD and Customers boards we only need to initialize a single |
| * entry of the arrays below, and set the boardTdmInfoIndex to 0. |
| */ |
| MV_U8 numBoardTdmInfo[BOARD_TDM_SLIC_COUNT]; |
| MV_BOARD_TDM_INFO *pBoardTdmInt2CsInfo[BOARD_TDM_SLIC_COUNT]; |
| MV_16 boardTdmInfoIndex; |
| |
| /* Board specific initialization. Performed before initializing the SoC. */ |
| MV_BOARD_SPEC_INIT *pBoardSpecInit; |
| /* Deep-Idle power up delay */ |
| MV_U32 deepIdlePwrUpDelay; |
| |
| /* NAND init params */ |
| MV_U32 nandFlashReadParams; |
| MV_U32 nandFlashWriteParams; |
| MV_U32 nandFlashControl; |
| MV_NAND_IF_MODE nandIfMode; |
| |
| MV_BOARD_TDM_SPI_INFO *pBoardTdmSpiInfo; |
| MV_BOARD_PEX_INFO boardPexInfo; /* filled in runtime */ |
| MV_U32 norFlashReadParams; |
| MV_U32 norFlashWriteParams; |
| |
| MV_BOOL isSdMmcConnected; /* indicate SD/MMC card reader on board */ |
| MV_BOOL isSdMmc_1_8v_Connected; /* indicate SD/MMC card reader connected to 1.8v power supply on board */ |
| |
| MV_U8 *picGpioInfo; /* integer array to indicate PIC MPP numbers */ |
| MV_U8 numPicGpioInfo; |
| |
| /* Indicates if auto-detection of modules is enabled on this board. */ |
| /* Set to MV_FALSE for any board that is not a DB. */ |
| MV_BOOL configAutoDetect; |
| MV_U32 numIoExp; |
| struct MV_BOARD_IO_EXPANDER *pIoExp; |
| MV_U32 boardOptionsModule; |
| MV_BOOL isAmc; /* AMC active: used for DT update & switching services */ |
| MV_BOOL isAudioConnected; /* indicates if SPDIF/I2S is connected */ |
| MV_BOOL isTdmConnected; /* indicates if TDM module is connected */ |
| /* External Switch Configuration */ |
| struct MV_BOARD_SWITCH_INFO *pSwitchInfo; |
| MV_U32 switchInfoNum; |
| } MV_BOARD_INFO; |
| |
| struct _mvBoardMppModule { |
| MV_U32 group; |
| MV_U32 mppValue; |
| }; |
| |
| |
| #define MPP_MII_MODULE { {0, 0x10111111}, {1, 0x11111111}, {2, 0x11211111} } |
| #define MPP_TDM_MODULE { {6, 0x55333333}, {7, 0x00004444} } |
| #define MPP_AUDIO_MODULE {6, 0x55444444} |
| #define MPP_NOR_MODULE { {0, 0x55111111}, {1, 0x15555555}, {2, 0x55566011}, \ |
| {3, 0x55555055}, {4, 0x55555555}, {5, 0x40045525 } } |
| #define MPP_NAND_MODULE { {0, 0x55111111}, {1, 0x15555555}, {2, 0x55266011}, \ |
| {3, 0x25255051}, {4, 0x25555555}, {5, 0x40042555 } } |
| #define MPP_SDIO_MODULE { {2, 0x11466011}, {3, 0x22242011}, {4, 0x44400002}, {5, 0x40042024 } } |
| #define MPP_NAND_ON_BOARD { {2, 0x55266011}, {3, 0x25252051}, {4, 0x25255555}, {5, 0x40042565 } } |
| #define MPP_GP_MINI_PCIE0 {2, 0x11240011} |
| #define MPP_GP_MINI_PCIE1 {2, 0x11204011} |
| #define MPP_GP_MINI_PCIE0_PCIE1 {2, 0x11200011} |
| #define MPP_MMC_DB381_MODULE {3, 0x00044444} |
| |
| /* Boot device bus width */ |
| #define MSAR_0_BOOT_DEV_BUS_WIDTH_OFFS 3 |
| /* Bus width field meaning for NOR/NAND */ |
| #define MSAR_0_BOOT_DEV_BUS_WIDTH_8BIT (0x0 << MSAR_0_BOOT_DEV_BUS_WIDTH_OFFS) |
| #define MSAR_0_BOOT_DEV_BUS_WIDTH_16BIT (0x1 << MSAR_0_BOOT_DEV_BUS_WIDTH_OFFS) |
| #define MSAR_0_BOOT_DEV_BUS_WIDTH_32BIT (0x2 << MSAR_0_BOOT_DEV_BUS_WIDTH_OFFS) |
| /* Bus width field meaning for SPI */ |
| #define MSAR_0_BOOT_DEV_BUS_WIDTH_SPI_24BIT (0x1 << MSAR_0_BOOT_DEV_BUS_WIDTH_OFFS) |
| #define MSAR_0_BOOT_DEV_BUS_WIDTH_SPI_32BIT (0x0 << MSAR_0_BOOT_DEV_BUS_WIDTH_OFFS) |
| |
| /* NAND page size */ |
| #define MSAR_0_NAND_PAGE_SZ_OFFS 11 |
| #define MSAR_0_NAND_PAGE_SZ_512B (0x0 << MSAR_0_NAND_PAGE_SZ_OFFS) |
| #define MSAR_0_NAND_PAGE_SZ_2KB (0x1 << MSAR_0_NAND_PAGE_SZ_OFFS) |
| #define MSAR_0_NAND_PAGE_SZ_4KB (0x2 << MSAR_0_NAND_PAGE_SZ_OFFS) |
| #define MSAR_0_NAND_PAGE_SZ_8KB (0x3 << MSAR_0_NAND_PAGE_SZ_OFFS) |
| |
| /* NAND ECC */ |
| #define MSAR_0_NAND_ECC_OFFS 14 |
| #define MSAR_0_NAND_ECC_4BIT (0x0 << MSAR_0_NAND_ECC_OFFS) |
| #define MSAR_0_NAND_ECC_8BIT (0x1 << MSAR_0_NAND_ECC_OFFS) |
| #define MSAR_0_NAND_ECC_12BIT (0x2 << MSAR_0_NAND_ECC_OFFS) |
| #define MSAR_0_NAND_ECC_16BIT (0x3 << MSAR_0_NAND_ECC_OFFS) |
| |
| #define MSAR_0_SPI0 0 |
| #define MSAR_0_SPI1 1 |
| |
| /* definition for switch device scan mode */ |
| #define MV_SWITCH_SMI_AUTO_SCAN_MODE 0 /* Scan 0 or 0x10 base address to find the QD */ |
| #define MV_SWITCH_SMI_MANUAL_MODE 1 /* Use QD located at manually defined base addr */ |
| #define MV_SWITCH_SMI_MULTI_ADDR_MODE 2 /* Use QD at base addr and use indirect access */ |
| |
| MV_VOID mvBoardEnvInit(MV_VOID); |
| MV_U16 mvBoardModelGet(MV_VOID); |
| MV_U32 mvBoardRevGet(MV_VOID); |
| MV_STATUS mvBoardNameGet(char *pNameBuff, MV_U32 size); |
| MV_BOARD_SPEC_INIT *mvBoardSpecInitGet(MV_VOID); |
| MV_U32 mvBoardPortTypeGet(MV_U32 ethPortNum); |
| MV_BOOL mvBoardIsPortInSgmii(MV_U32 ethPortNum); |
| MV_BOOL mvBoardIsPortInGmii(MV_U32 ethPortNum); |
| MV_BOOL mvBoardIsPortInMii(MV_U32 ethPortNum); |
| MV_BOOL mvBoardIsPortInRgmii(MV_U32 ethPortNum); |
| MV_BOOL mvBoardIsPortLoopback(MV_U32 ethPortNum); |
| MV_VOID mvBoardModuleConfigSet(MV_U32 newCfg); |
| MV_32 mvBoardModuleConfigGet(MV_VOID); |
| MV_32 mvBoardPhyAddrGet(MV_U32 ethPortNum); |
| MV_VOID mvBoardPhyAddrSet(MV_U32 ethPortNum, MV_U32 smiAddr); |
| MV_32 mvBoardQuadPhyAddr0Get(MV_U32 ethPortNum); |
| MV_VOID mvBoardQuadPhyAddr0Set(MV_U32 ethPortNum, MV_U32 smiAddr); |
| MV_STATUS mvBoardSatrInfoConfig(MV_SATR_TYPE_ID satrClass, MV_BOARD_SATR_INFO *satrInfo); |
| MV_STATUS mvBoardModuleTypeGet(MV_MODULE_TYPE_ID configClass, MV_MODULE_TYPE_INFO *configInfo); |
| MV_STATUS mvBoardExtPhyBufferSelect(MV_BOOL enable); |
| MV_STATUS mvBoardSgmiiSfp0TxSet(MV_BOOL enable); |
| MV_U32 mvBoardTclkGet(MV_VOID); |
| MV_U32 mvBoardL2ClkGetRaw(MV_VOID); |
| MV_U32 mvBoardSysClkGet(MV_VOID); |
| MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId); |
| MV_VOID mvBoardDebugLed(MV_U32 hexNum); |
| MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index); |
| MV_VOID mvBoardReset(MV_VOID); |
| MV_BOARD_PEX_INFO *mvBoardPexInfoGet(void); |
| MV_32 mvBoardResetGpioPinGet(MV_VOID); |
| #ifdef MV_USB_VBUS_CYCLE |
| MV_32 mvBoardUSBVbusGpioPinGet(MV_32 devId); |
| MV_STATUS mvBoardIoExpanderTypeGet(MV_IO_EXPANDER_TYPE_ID ioClass, MV_BOARD_IO_EXPANDER_TYPE_INFO *ioInfo); |
| MV_VOID mvBoardUsbVbusSet(int dev); |
| #endif |
| MV_BOOL mvBoardIsOurPciSlot(MV_U32 busNum, MV_U32 slotNum); |
| MV_U32 mvBoardGpioIntMaskGet(MV_U32 gppGrp); |
| MV_U32 mvBoardSlicUnitTypeGet(MV_VOID); |
| MV_VOID mvBoardSlicUnitTypeSet(MV_U32 slicType); |
| MV_32 mvBoardMppGet(MV_U32 mppGroupNum); |
| MV_VOID mvBoardMppSet(MV_U32 mppGroupNum, MV_U32 mppValue); |
| MV_U8 mvBoardTdmSpiIdGet(MV_VOID); |
| MV_VOID mvBoardConfigurationPrint(MV_VOID); |
| MV_BOOL mvBoardIsGbEPortConnected(MV_U32 ethPortNum); |
| MV_32 mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass); |
| MV_32 mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); |
| MV_32 mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); |
| MV_32 mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); |
| MV_U32 mvBoardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); |
| MV_U32 mvBoardGetDevBusNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); |
| MV_BOOL mvBoardGetDevState(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); |
| MV_STATUS mvBoardSetDevState(MV_32 devNum, MV_BOARD_DEV_CLASS devClass, MV_BOOL newState); |
| MV_U8 mvBoardTwsiAddrTypeGet(MV_BOARD_TWSI_CLASS twsiClass, MV_U32 index); |
| MV_U8 mvBoardTwsiAddrGet(MV_BOARD_TWSI_CLASS twsiClass, MV_U32 index); |
| MV_VOID mvBoardTwsiAddrSet(MV_BOARD_TWSI_CLASS twsiClass, MV_U32 index, MV_U8 address); |
| MV_U8 mvBoardTwsiIsMore256Get(MV_BOARD_TWSI_CLASS twsiClass, MV_U32 index); |
| MV_U32 mvBoardNetComplexConfigGet(MV_VOID); |
| MV_VOID mvBoardNetComplexConfigSet(MV_U32 ethConfig); |
| MV_U32 mvBoardIdIndexGet(MV_U32 boardId); |
| MV_U32 mvBoardIdGet(MV_VOID); |
| MV_VOID mvBoardSet(MV_U32 boardId); |
| MV_U32 mvBoardSledCpuNumGet(MV_VOID); |
| MV_VOID mvBoardFlashDeviceUpdate(MV_VOID); |
| MV_VOID mvBoardInfoUpdate(MV_VOID); |
| MV_VOID mvBoardVerifySerdesCofig(MV_VOID); |
| MV_VOID mvBoardMppIdUpdate(MV_VOID); |
| MV_STATUS mvBoardNetComplexInfoUpdate(MV_VOID); |
| MV_VOID mvBoardConfigWrite(MV_VOID); |
| MV_BOARD_BOOT_SRC mvBoardBootDeviceGroupSet(MV_VOID); |
| MV_BOARD_BOOT_SRC mvBoardBootDeviceGet(MV_VOID); |
| MV_U32 mvBoardBootAttrGet(MV_U32 satrBootDeviceValue, MV_U8 attrNum); |
| MV_U32 mvBoardSpiBusGet(MV_VOID); |
| MV_STATUS mvBoardTwsiGet(MV_BOARD_TWSI_CLASS twsiClass, MV_U8 devNum, MV_U8 regNum, MV_U8 *pData, MV_U32 len); |
| MV_STATUS mvBoardTwsiSet(MV_BOARD_TWSI_CLASS twsiClass, MV_U8 devNum, MV_U8 regNum, MV_U8 *regVal, MV_U32 len); |
| MV_U8 mvBoardCpuFreqGet(MV_VOID); |
| MV_STATUS mvBoardCpuFreqSet(MV_U8 freqVal); |
| MV_STATUS mvBoardIsSwitchConnected(void); |
| MV_U32 mvBoardSwitchPortForceLinkGet(MV_U32 switchIdx); |
| MV_U32 mvBoardFreqModesNumGet(void); |
| MV_32 mvBoardSmiScanModeGet(MV_U32 switchIdx); |
| MV_BOARD_MAC_SPEED mvBoardMacSpeedGet(MV_U32 ethPortNum); |
| MV_VOID mvBoardMacSpeedSet(MV_U32 ethPortNum, MV_BOARD_MAC_SPEED speed); |
| MV_VOID mvBoardMacSpeedSet(MV_U32 ethPortNum, MV_BOARD_MAC_SPEED macSpeed); |
| MV_U32 mvBoardSwitchCpuPortGet(MV_U32 switchIdx); |
| MV_32 mvBoardSwitchPhyAddrGet(MV_U32 switchIdx); |
| MV_32 mvBoardSwitchConnectedPortGet(MV_U32 ethPort); |
| MV_BOOL mvBoardSwitchCpuPortIsRgmii(MV_U32 switchIdx); |
| MV_VOID mvBoardModuleSwitchInfoUpdate(MV_BOOL switchDetected); |
| MV_U32 mvBoardMacCpuPortGet(MV_VOID); |
| MV_BOOL mvBoardIsEthConnected(MV_U32 ethNum); |
| MV_BOOL mvBoardIsEthActive(MV_U32 ethNum); |
| MV_32 mvBoardSwitchIrqGet(MV_VOID); |
| MV_U32 mvBoardSwitchPortsMaskGet(MV_U32 switchIdx); |
| MV_BOOL mvBoardConfigAutoDetectEnabled(void); |
| MV_32 mvBoardSmiScanModeGet(MV_U32 switchIdx); |
| MV_STATUS mvBoardConfIdSet(MV_U16 conf); |
| MV_U16 mvBoardPexModeGet(MV_VOID); |
| MV_STATUS mvBoardPexModeSet(MV_U16 conf); |
| MV_BOOL mvBoardIsLcdDviModuleConnected(void); |
| MV_BOOL mvBoardIsPexModuleConnected(void); |
| MV_BOOL mvBoardIsLvdsModuleConnected(void); |
| MV_BOOL mvBoardIsSetmModuleConnected(void); |
| MV_U8 mvBoardCpuCoresNumGet(MV_VOID); |
| MV_VOID mvBoardMppModuleTypePrint(MV_VOID); |
| MV_VOID mvBoardOtherModuleTypePrint(MV_VOID); |
| MV_BOOL mvBoardIsModuleConnected(MV_U32 ModuleID); |
| MV_STATUS mvBoardIoExpanderUpdate(MV_VOID); |
| MV_U8 mvBoardPICGpioGet(MV_U32 *picGpioMppInfo); |
| MV_STATUS mvBoardTwsiSatRGet(MV_U8 devNum, MV_U8 regNum, MV_U8 *pData); |
| MV_STATUS mvBoardTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal); |
| MV_U32 mvBoardSatRRead(MV_SATR_TYPE_ID satrField); |
| MV_STATUS mvBoardSatRWrite(MV_SATR_TYPE_ID satrWriteField, MV_U8 val); |
| MV_STATUS mvBoardIoExpanderGet(MV_U8 addr, MV_U8 offs, MV_U8 *pVal); |
| MV_STATUS mvBoardIoExpanderSet(MV_U8 addr, MV_U8 offs, MV_U8 val); |
| int mvBoardNorFlashConnect(void); |
| MV_NFC_ECC_MODE mvBoardNandECCModeGet(void); |
| MV_U8 mvBoardCompatibleNameGet(char *pNameBuff); |
| |
| #ifdef CONFIG_CMD_BOARDCFG |
| typedef struct _boardConfigTypesInfo { |
| MV_CONFIG_TYPE_ID configId; |
| MV_U8 mask; |
| MV_U8 offset; |
| MV_U32 byteNum; |
| MV_U32 isActiveForBoard[MV_MARVELL_BOARD_NUM]; |
| } MV_BOARD_CONFIG_TYPE_INFO; |
| |
| MV_U32 mvBoardDefaultValueGet(int option); |
| MV_STATUS mvBoardEepromWriteDefaultCfg(void); |
| MV_STATUS mvBoardEepromInit(void); |
| MV_BOOL mvBoardConfigTypeGet(MV_CONFIG_TYPE_ID configClass, MV_BOARD_CONFIG_TYPE_INFO *configInfo); |
| MV_STATUS mvBoardConfigGet(MV_U32 *config); |
| MV_VOID mvBoardSysConfigInit(void); |
| MV_BOOL mvBoardIsEepromEnabled(void); |
| MV_STATUS mvBoardEepromWrite(MV_CONFIG_TYPE_ID configType, MV_U8 value); |
| MV_STATUS mvBoardConfigVerify(MV_CONFIG_TYPE_ID field, MV_U8 writeVal); |
| MV_U32 mvBoardSysConfigGet(MV_CONFIG_TYPE_ID configField); |
| MV_STATUS mvBoardSysConfigSet(MV_CONFIG_TYPE_ID configField, MV_U8 value); |
| void mvBoardEepromValidSet(void); |
| #endif /* CONFIG_CMD_BOARDCFG */ |
| MV_BOOL mvBoardIsTdmConnected(void); |
| void mvBoardTdmConnectionSet(MV_BOOL isConnected); |
| MV_NAND_IF_MODE mvBoardNandIfGet(void); |
| MV_BOOL mvBoardisSdioConnected(void); |
| MV_VOID mvBoardSdioConnectionSet(MV_BOOL status); |
| MV_BOOL mvBoardIsUsbPortConnected(MV_UNIT_ID usbTypeID, MV_U8 usbPortNumber); |
| MV_BOARD_INFO *mvBoardInfoStructureGet(MV_VOID); |
| MV_BOOL mvBoardIsAudioConnected(void); |
| void mvBoardAudioConnectionSet(MV_BOOL isConnected); |
| MV_BOOL mvBoardIsUsb3PortDevice(MV_U32 port); |
| |
| #ifdef CONFIG_SWITCHING_SERVICES |
| MV_BOOL mvBoardisAmc(void); |
| #endif |
| |
| #ifdef __cplusplus |
| } |
| #endif /* __cplusplus */ |
| |
| #endif /* __INCmvBoardEnvLibh */ |
