| /* |
| * Copyright (C) 2010 Samsung Electronics |
| * Minkyu Kang <mk7.kang@samsung.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/periph.h> |
| |
| /* Epll Clock division values to achive different frequency output */ |
| static struct set_epll_con_val exynos5_epll_div[] = { |
| { 192000000, 0, 48, 3, 1, 0 }, |
| { 180000000, 0, 45, 3, 1, 0 }, |
| { 73728000, 1, 73, 3, 3, 47710 }, |
| { 67737600, 1, 90, 4, 3, 20762 }, |
| { 49152000, 0, 49, 3, 3, 9961 }, |
| { 45158400, 0, 45, 3, 3, 10381 }, |
| { 180633600, 0, 45, 3, 1, 10381 } |
| }; |
| |
| /* exynos: return pll clock frequency */ |
| static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) |
| { |
| unsigned long m, p, s = 0, mask, fout; |
| unsigned int freq; |
| /* |
| * APLL_CON: MIDV [25:16] |
| * MPLL_CON: MIDV [25:16] |
| * EPLL_CON: MIDV [24:16] |
| * VPLL_CON: MIDV [24:16] |
| * BPLL_CON: MIDV [25:16]: Exynos5 |
| */ |
| if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) |
| mask = 0x3ff; |
| else |
| mask = 0x1ff; |
| |
| m = (r >> 16) & mask; |
| |
| /* PDIV [13:8] */ |
| p = (r >> 8) & 0x3f; |
| /* SDIV [2:0] */ |
| s = r & 0x7; |
| |
| freq = CONFIG_SYS_CLK_FREQ; |
| |
| if (pllreg == EPLL) { |
| k = k & 0xffff; |
| /* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */ |
| fout = (m + k / 65536) * (freq / (p * (1 << s))); |
| } else if (pllreg == VPLL) { |
| k = k & 0xfff; |
| /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */ |
| fout = (m + k / 1024) * (freq / (p * (1 << s))); |
| } else { |
| if (s < 1) |
| s = 1; |
| /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */ |
| fout = m * (freq / (p * (1 << (s - 1)))); |
| } |
| |
| return fout; |
| } |
| |
| /* exynos4: return pll clock frequency */ |
| static unsigned long exynos4_get_pll_clk(int pllreg) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned long r, k = 0; |
| |
| switch (pllreg) { |
| case APLL: |
| r = readl(&clk->apll_con0); |
| break; |
| case MPLL: |
| r = readl(&clk->mpll_con0); |
| break; |
| case EPLL: |
| r = readl(&clk->epll_con0); |
| k = readl(&clk->epll_con1); |
| break; |
| case VPLL: |
| r = readl(&clk->vpll_con0); |
| k = readl(&clk->vpll_con1); |
| break; |
| default: |
| printf("Unsupported PLL (%d)\n", pllreg); |
| return 0; |
| } |
| |
| return exynos_get_pll_clk(pllreg, r, k); |
| } |
| |
| /* exynos4x12: return pll clock frequency */ |
| static unsigned long exynos4x12_get_pll_clk(int pllreg) |
| { |
| struct exynos4x12_clock *clk = |
| (struct exynos4x12_clock *)samsung_get_base_clock(); |
| unsigned long r, k = 0; |
| |
| switch (pllreg) { |
| case APLL: |
| r = readl(&clk->apll_con0); |
| break; |
| case MPLL: |
| r = readl(&clk->mpll_con0); |
| break; |
| case EPLL: |
| r = readl(&clk->epll_con0); |
| k = readl(&clk->epll_con1); |
| break; |
| case VPLL: |
| r = readl(&clk->vpll_con0); |
| k = readl(&clk->vpll_con1); |
| break; |
| default: |
| printf("Unsupported PLL (%d)\n", pllreg); |
| return 0; |
| } |
| |
| return exynos_get_pll_clk(pllreg, r, k); |
| } |
| |
| /* exynos5: return pll clock frequency */ |
| static unsigned long exynos5_get_pll_clk(int pllreg) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned long r, k = 0, fout; |
| unsigned int pll_div2_sel, fout_sel; |
| |
| switch (pllreg) { |
| case APLL: |
| r = readl(&clk->apll_con0); |
| break; |
| case MPLL: |
| r = readl(&clk->mpll_con0); |
| break; |
| case EPLL: |
| r = readl(&clk->epll_con0); |
| k = readl(&clk->epll_con1); |
| break; |
| case VPLL: |
| r = readl(&clk->vpll_con0); |
| k = readl(&clk->vpll_con1); |
| break; |
| case BPLL: |
| r = readl(&clk->bpll_con0); |
| break; |
| default: |
| printf("Unsupported PLL (%d)\n", pllreg); |
| return 0; |
| } |
| |
| fout = exynos_get_pll_clk(pllreg, r, k); |
| |
| /* According to the user manual, in EVT1 MPLL and BPLL always gives |
| * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ |
| if (pllreg == MPLL || pllreg == BPLL) { |
| pll_div2_sel = readl(&clk->pll_div2_sel); |
| |
| switch (pllreg) { |
| case MPLL: |
| fout_sel = (pll_div2_sel >> MPLL_FOUT_SEL_SHIFT) |
| & MPLL_FOUT_SEL_MASK; |
| break; |
| case BPLL: |
| fout_sel = (pll_div2_sel >> BPLL_FOUT_SEL_SHIFT) |
| & BPLL_FOUT_SEL_MASK; |
| break; |
| default: |
| fout_sel = -1; |
| break; |
| } |
| |
| if (fout_sel == 0) |
| fout /= 2; |
| } |
| |
| return fout; |
| } |
| |
| /* exynos4: return ARM clock frequency */ |
| static unsigned long exynos4_get_arm_clk(void) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned long div; |
| unsigned long armclk; |
| unsigned int core_ratio; |
| unsigned int core2_ratio; |
| |
| div = readl(&clk->div_cpu0); |
| |
| /* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */ |
| core_ratio = (div >> 0) & 0x7; |
| core2_ratio = (div >> 28) & 0x7; |
| |
| armclk = get_pll_clk(APLL) / (core_ratio + 1); |
| armclk /= (core2_ratio + 1); |
| |
| return armclk; |
| } |
| |
| /* exynos4x12: return ARM clock frequency */ |
| static unsigned long exynos4x12_get_arm_clk(void) |
| { |
| struct exynos4x12_clock *clk = |
| (struct exynos4x12_clock *)samsung_get_base_clock(); |
| unsigned long div; |
| unsigned long armclk; |
| unsigned int core_ratio; |
| unsigned int core2_ratio; |
| |
| div = readl(&clk->div_cpu0); |
| |
| /* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */ |
| core_ratio = (div >> 0) & 0x7; |
| core2_ratio = (div >> 28) & 0x7; |
| |
| armclk = get_pll_clk(APLL) / (core_ratio + 1); |
| armclk /= (core2_ratio + 1); |
| |
| return armclk; |
| } |
| |
| /* exynos5: return ARM clock frequency */ |
| static unsigned long exynos5_get_arm_clk(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned long div; |
| unsigned long armclk; |
| unsigned int arm_ratio; |
| unsigned int arm2_ratio; |
| |
| div = readl(&clk->div_cpu0); |
| |
| /* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */ |
| arm_ratio = (div >> 0) & 0x7; |
| arm2_ratio = (div >> 28) & 0x7; |
| |
| armclk = get_pll_clk(APLL) / (arm_ratio + 1); |
| armclk /= (arm2_ratio + 1); |
| |
| return armclk; |
| } |
| |
| /* exynos4: return pwm clock frequency */ |
| static unsigned long exynos4_get_pwm_clk(void) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned long pclk, sclk; |
| unsigned int sel; |
| unsigned int ratio; |
| |
| if (s5p_get_cpu_rev() == 0) { |
| /* |
| * CLK_SRC_PERIL0 |
| * PWM_SEL [27:24] |
| */ |
| sel = readl(&clk->src_peril0); |
| sel = (sel >> 24) & 0xf; |
| |
| if (sel == 0x6) |
| sclk = get_pll_clk(MPLL); |
| else if (sel == 0x7) |
| sclk = get_pll_clk(EPLL); |
| else if (sel == 0x8) |
| sclk = get_pll_clk(VPLL); |
| else |
| return 0; |
| |
| /* |
| * CLK_DIV_PERIL3 |
| * PWM_RATIO [3:0] |
| */ |
| ratio = readl(&clk->div_peril3); |
| ratio = ratio & 0xf; |
| } else if (s5p_get_cpu_rev() == 1) { |
| sclk = get_pll_clk(MPLL); |
| ratio = 8; |
| } else |
| return 0; |
| |
| pclk = sclk / (ratio + 1); |
| |
| return pclk; |
| } |
| |
| /* exynos4x12: return pwm clock frequency */ |
| static unsigned long exynos4x12_get_pwm_clk(void) |
| { |
| unsigned long pclk, sclk; |
| unsigned int ratio; |
| |
| sclk = get_pll_clk(MPLL); |
| ratio = 8; |
| |
| pclk = sclk / (ratio + 1); |
| |
| return pclk; |
| } |
| |
| /* exynos5: return pwm clock frequency */ |
| static unsigned long exynos5_get_pwm_clk(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned long pclk, sclk; |
| unsigned int ratio; |
| |
| /* |
| * CLK_DIV_PERIC3 |
| * PWM_RATIO [3:0] |
| */ |
| ratio = readl(&clk->div_peric3); |
| ratio = ratio & 0xf; |
| sclk = get_pll_clk(MPLL); |
| |
| pclk = sclk / (ratio + 1); |
| |
| return pclk; |
| } |
| |
| /* exynos4: return uart clock frequency */ |
| static unsigned long exynos4_get_uart_clk(int dev_index) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned long uclk, sclk; |
| unsigned int sel; |
| unsigned int ratio; |
| |
| /* |
| * CLK_SRC_PERIL0 |
| * UART0_SEL [3:0] |
| * UART1_SEL [7:4] |
| * UART2_SEL [8:11] |
| * UART3_SEL [12:15] |
| * UART4_SEL [16:19] |
| * UART5_SEL [23:20] |
| */ |
| sel = readl(&clk->src_peril0); |
| sel = (sel >> (dev_index << 2)) & 0xf; |
| |
| if (sel == 0x6) |
| sclk = get_pll_clk(MPLL); |
| else if (sel == 0x7) |
| sclk = get_pll_clk(EPLL); |
| else if (sel == 0x8) |
| sclk = get_pll_clk(VPLL); |
| else |
| return 0; |
| |
| /* |
| * CLK_DIV_PERIL0 |
| * UART0_RATIO [3:0] |
| * UART1_RATIO [7:4] |
| * UART2_RATIO [8:11] |
| * UART3_RATIO [12:15] |
| * UART4_RATIO [16:19] |
| * UART5_RATIO [23:20] |
| */ |
| ratio = readl(&clk->div_peril0); |
| ratio = (ratio >> (dev_index << 2)) & 0xf; |
| |
| uclk = sclk / (ratio + 1); |
| |
| return uclk; |
| } |
| |
| /* exynos4x12: return uart clock frequency */ |
| static unsigned long exynos4x12_get_uart_clk(int dev_index) |
| { |
| struct exynos4x12_clock *clk = |
| (struct exynos4x12_clock *)samsung_get_base_clock(); |
| unsigned long uclk, sclk; |
| unsigned int sel; |
| unsigned int ratio; |
| |
| /* |
| * CLK_SRC_PERIL0 |
| * UART0_SEL [3:0] |
| * UART1_SEL [7:4] |
| * UART2_SEL [8:11] |
| * UART3_SEL [12:15] |
| * UART4_SEL [16:19] |
| */ |
| sel = readl(&clk->src_peril0); |
| sel = (sel >> (dev_index << 2)) & 0xf; |
| |
| if (sel == 0x6) |
| sclk = get_pll_clk(MPLL); |
| else if (sel == 0x7) |
| sclk = get_pll_clk(EPLL); |
| else if (sel == 0x8) |
| sclk = get_pll_clk(VPLL); |
| else |
| return 0; |
| |
| /* |
| * CLK_DIV_PERIL0 |
| * UART0_RATIO [3:0] |
| * UART1_RATIO [7:4] |
| * UART2_RATIO [8:11] |
| * UART3_RATIO [12:15] |
| * UART4_RATIO [16:19] |
| */ |
| ratio = readl(&clk->div_peril0); |
| ratio = (ratio >> (dev_index << 2)) & 0xf; |
| |
| uclk = sclk / (ratio + 1); |
| |
| return uclk; |
| } |
| |
| /* exynos5: return uart clock frequency */ |
| static unsigned long exynos5_get_uart_clk(int dev_index) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned long uclk, sclk; |
| unsigned int sel; |
| unsigned int ratio; |
| |
| /* |
| * CLK_SRC_PERIC0 |
| * UART0_SEL [3:0] |
| * UART1_SEL [7:4] |
| * UART2_SEL [8:11] |
| * UART3_SEL [12:15] |
| * UART4_SEL [16:19] |
| * UART5_SEL [23:20] |
| */ |
| sel = readl(&clk->src_peric0); |
| sel = (sel >> (dev_index << 2)) & 0xf; |
| |
| if (sel == 0x6) |
| sclk = get_pll_clk(MPLL); |
| else if (sel == 0x7) |
| sclk = get_pll_clk(EPLL); |
| else if (sel == 0x8) |
| sclk = get_pll_clk(VPLL); |
| else |
| return 0; |
| |
| /* |
| * CLK_DIV_PERIC0 |
| * UART0_RATIO [3:0] |
| * UART1_RATIO [7:4] |
| * UART2_RATIO [8:11] |
| * UART3_RATIO [12:15] |
| * UART4_RATIO [16:19] |
| * UART5_RATIO [23:20] |
| */ |
| ratio = readl(&clk->div_peric0); |
| ratio = (ratio >> (dev_index << 2)) & 0xf; |
| |
| uclk = sclk / (ratio + 1); |
| |
| return uclk; |
| } |
| |
| static unsigned long exynos4_get_mmc_clk(int dev_index) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned long uclk, sclk; |
| unsigned int sel, ratio, pre_ratio; |
| int shift; |
| |
| sel = readl(&clk->src_fsys); |
| sel = (sel >> (dev_index << 2)) & 0xf; |
| |
| if (sel == 0x6) |
| sclk = get_pll_clk(MPLL); |
| else if (sel == 0x7) |
| sclk = get_pll_clk(EPLL); |
| else if (sel == 0x8) |
| sclk = get_pll_clk(VPLL); |
| else |
| return 0; |
| |
| switch (dev_index) { |
| case 0: |
| case 1: |
| ratio = readl(&clk->div_fsys1); |
| pre_ratio = readl(&clk->div_fsys1); |
| break; |
| case 2: |
| case 3: |
| ratio = readl(&clk->div_fsys2); |
| pre_ratio = readl(&clk->div_fsys2); |
| break; |
| case 4: |
| ratio = readl(&clk->div_fsys3); |
| pre_ratio = readl(&clk->div_fsys3); |
| break; |
| default: |
| return 0; |
| } |
| |
| if (dev_index == 1 || dev_index == 3) |
| shift = 16; |
| |
| ratio = (ratio >> shift) & 0xf; |
| pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; |
| uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); |
| |
| return uclk; |
| } |
| |
| static unsigned long exynos5_get_mmc_clk(int dev_index) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned long uclk, sclk; |
| unsigned int sel, ratio, pre_ratio; |
| int shift; |
| |
| sel = readl(&clk->src_fsys); |
| sel = (sel >> (dev_index << 2)) & 0xf; |
| |
| if (sel == 0x6) |
| sclk = get_pll_clk(MPLL); |
| else if (sel == 0x7) |
| sclk = get_pll_clk(EPLL); |
| else if (sel == 0x8) |
| sclk = get_pll_clk(VPLL); |
| else |
| return 0; |
| |
| switch (dev_index) { |
| case 0: |
| case 1: |
| ratio = readl(&clk->div_fsys1); |
| pre_ratio = readl(&clk->div_fsys1); |
| break; |
| case 2: |
| case 3: |
| ratio = readl(&clk->div_fsys2); |
| pre_ratio = readl(&clk->div_fsys2); |
| break; |
| default: |
| return 0; |
| } |
| |
| if (dev_index == 1 || dev_index == 3) |
| shift = 16; |
| |
| ratio = (ratio >> shift) & 0xf; |
| pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; |
| uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); |
| |
| return uclk; |
| } |
| |
| /* exynos4: set the mmc clock */ |
| static void exynos4_set_mmc_clk(int dev_index, unsigned int div) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned int addr; |
| unsigned int val; |
| |
| /* |
| * CLK_DIV_FSYS1 |
| * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] |
| * CLK_DIV_FSYS2 |
| * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] |
| * CLK_DIV_FSYS3 |
| * MMC4_PRE_RATIO [15:8] |
| */ |
| if (dev_index < 2) { |
| addr = (unsigned int)&clk->div_fsys1; |
| } else if (dev_index == 4) { |
| addr = (unsigned int)&clk->div_fsys3; |
| dev_index -= 4; |
| } else { |
| addr = (unsigned int)&clk->div_fsys2; |
| dev_index -= 2; |
| } |
| |
| val = readl(addr); |
| val &= ~(0xff << ((dev_index << 4) + 8)); |
| val |= (div & 0xff) << ((dev_index << 4) + 8); |
| writel(val, addr); |
| } |
| |
| /* exynos4x12: set the mmc clock */ |
| static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div) |
| { |
| struct exynos4x12_clock *clk = |
| (struct exynos4x12_clock *)samsung_get_base_clock(); |
| unsigned int addr; |
| unsigned int val; |
| |
| /* |
| * CLK_DIV_FSYS1 |
| * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] |
| * CLK_DIV_FSYS2 |
| * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] |
| */ |
| if (dev_index < 2) { |
| addr = (unsigned int)&clk->div_fsys1; |
| } else { |
| addr = (unsigned int)&clk->div_fsys2; |
| dev_index -= 2; |
| } |
| |
| val = readl(addr); |
| val &= ~(0xff << ((dev_index << 4) + 8)); |
| val |= (div & 0xff) << ((dev_index << 4) + 8); |
| writel(val, addr); |
| } |
| |
| /* exynos5: set the mmc clock */ |
| static void exynos5_set_mmc_clk(int dev_index, unsigned int div) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned int addr; |
| unsigned int val; |
| |
| /* |
| * CLK_DIV_FSYS1 |
| * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] |
| * CLK_DIV_FSYS2 |
| * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] |
| */ |
| if (dev_index < 2) { |
| addr = (unsigned int)&clk->div_fsys1; |
| } else { |
| addr = (unsigned int)&clk->div_fsys2; |
| dev_index -= 2; |
| } |
| |
| val = readl(addr); |
| val &= ~(0xff << ((dev_index << 4) + 8)); |
| val |= (div & 0xff) << ((dev_index << 4) + 8); |
| writel(val, addr); |
| } |
| |
| /* get_lcd_clk: return lcd clock frequency */ |
| static unsigned long exynos4_get_lcd_clk(void) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned long pclk, sclk; |
| unsigned int sel; |
| unsigned int ratio; |
| |
| /* |
| * CLK_SRC_LCD0 |
| * FIMD0_SEL [3:0] |
| */ |
| sel = readl(&clk->src_lcd0); |
| sel = sel & 0xf; |
| |
| /* |
| * 0x6: SCLK_MPLL |
| * 0x7: SCLK_EPLL |
| * 0x8: SCLK_VPLL |
| */ |
| if (sel == 0x6) |
| sclk = get_pll_clk(MPLL); |
| else if (sel == 0x7) |
| sclk = get_pll_clk(EPLL); |
| else if (sel == 0x8) |
| sclk = get_pll_clk(VPLL); |
| else |
| return 0; |
| |
| /* |
| * CLK_DIV_LCD0 |
| * FIMD0_RATIO [3:0] |
| */ |
| ratio = readl(&clk->div_lcd0); |
| ratio = ratio & 0xf; |
| |
| pclk = sclk / (ratio + 1); |
| |
| return pclk; |
| } |
| |
| /* get_lcd_clk: return lcd clock frequency */ |
| static unsigned long exynos5_get_lcd_clk(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned long pclk, sclk; |
| unsigned int sel; |
| unsigned int ratio; |
| |
| /* |
| * CLK_SRC_LCD0 |
| * FIMD0_SEL [3:0] |
| */ |
| sel = readl(&clk->src_disp1_0); |
| sel = sel & 0xf; |
| |
| /* |
| * 0x6: SCLK_MPLL |
| * 0x7: SCLK_EPLL |
| * 0x8: SCLK_VPLL |
| */ |
| if (sel == 0x6) |
| sclk = get_pll_clk(MPLL); |
| else if (sel == 0x7) |
| sclk = get_pll_clk(EPLL); |
| else if (sel == 0x8) |
| sclk = get_pll_clk(VPLL); |
| else |
| return 0; |
| |
| /* |
| * CLK_DIV_LCD0 |
| * FIMD0_RATIO [3:0] |
| */ |
| ratio = readl(&clk->div_disp1_0); |
| ratio = ratio & 0xf; |
| |
| pclk = sclk / (ratio + 1); |
| |
| return pclk; |
| } |
| |
| void exynos4_set_lcd_clk(void) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned int cfg = 0; |
| |
| /* |
| * CLK_GATE_BLOCK |
| * CLK_CAM [0] |
| * CLK_TV [1] |
| * CLK_MFC [2] |
| * CLK_G3D [3] |
| * CLK_LCD0 [4] |
| * CLK_LCD1 [5] |
| * CLK_GPS [7] |
| */ |
| cfg = readl(&clk->gate_block); |
| cfg |= 1 << 4; |
| writel(cfg, &clk->gate_block); |
| |
| /* |
| * CLK_SRC_LCD0 |
| * FIMD0_SEL [3:0] |
| * MDNIE0_SEL [7:4] |
| * MDNIE_PWM0_SEL [8:11] |
| * MIPI0_SEL [12:15] |
| * set lcd0 src clock 0x6: SCLK_MPLL |
| */ |
| cfg = readl(&clk->src_lcd0); |
| cfg &= ~(0xf); |
| cfg |= 0x6; |
| writel(cfg, &clk->src_lcd0); |
| |
| /* |
| * CLK_GATE_IP_LCD0 |
| * CLK_FIMD0 [0] |
| * CLK_MIE0 [1] |
| * CLK_MDNIE0 [2] |
| * CLK_DSIM0 [3] |
| * CLK_SMMUFIMD0 [4] |
| * CLK_PPMULCD0 [5] |
| * Gating all clocks for FIMD0 |
| */ |
| cfg = readl(&clk->gate_ip_lcd0); |
| cfg |= 1 << 0; |
| writel(cfg, &clk->gate_ip_lcd0); |
| |
| /* |
| * CLK_DIV_LCD0 |
| * FIMD0_RATIO [3:0] |
| * MDNIE0_RATIO [7:4] |
| * MDNIE_PWM0_RATIO [11:8] |
| * MDNIE_PWM_PRE_RATIO [15:12] |
| * MIPI0_RATIO [19:16] |
| * MIPI0_PRE_RATIO [23:20] |
| * set fimd ratio |
| */ |
| cfg &= ~(0xf); |
| cfg |= 0x1; |
| writel(cfg, &clk->div_lcd0); |
| } |
| |
| void exynos5_set_lcd_clk(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned int cfg = 0; |
| |
| /* |
| * CLK_GATE_BLOCK |
| * CLK_CAM [0] |
| * CLK_TV [1] |
| * CLK_MFC [2] |
| * CLK_G3D [3] |
| * CLK_LCD0 [4] |
| * CLK_LCD1 [5] |
| * CLK_GPS [7] |
| */ |
| cfg = readl(&clk->gate_block); |
| cfg |= 1 << 4; |
| writel(cfg, &clk->gate_block); |
| |
| /* |
| * CLK_SRC_LCD0 |
| * FIMD0_SEL [3:0] |
| * MDNIE0_SEL [7:4] |
| * MDNIE_PWM0_SEL [8:11] |
| * MIPI0_SEL [12:15] |
| * set lcd0 src clock 0x6: SCLK_MPLL |
| */ |
| cfg = readl(&clk->src_disp1_0); |
| cfg &= ~(0xf); |
| cfg |= 0x6; |
| writel(cfg, &clk->src_disp1_0); |
| |
| /* |
| * CLK_GATE_IP_LCD0 |
| * CLK_FIMD0 [0] |
| * CLK_MIE0 [1] |
| * CLK_MDNIE0 [2] |
| * CLK_DSIM0 [3] |
| * CLK_SMMUFIMD0 [4] |
| * CLK_PPMULCD0 [5] |
| * Gating all clocks for FIMD0 |
| */ |
| cfg = readl(&clk->gate_ip_disp1); |
| cfg |= 1 << 0; |
| writel(cfg, &clk->gate_ip_disp1); |
| |
| /* |
| * CLK_DIV_LCD0 |
| * FIMD0_RATIO [3:0] |
| * MDNIE0_RATIO [7:4] |
| * MDNIE_PWM0_RATIO [11:8] |
| * MDNIE_PWM_PRE_RATIO [15:12] |
| * MIPI0_RATIO [19:16] |
| * MIPI0_PRE_RATIO [23:20] |
| * set fimd ratio |
| */ |
| cfg &= ~(0xf); |
| cfg |= 0x0; |
| writel(cfg, &clk->div_disp1_0); |
| } |
| |
| void exynos4_set_mipi_clk(void) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned int cfg = 0; |
| |
| /* |
| * CLK_SRC_LCD0 |
| * FIMD0_SEL [3:0] |
| * MDNIE0_SEL [7:4] |
| * MDNIE_PWM0_SEL [8:11] |
| * MIPI0_SEL [12:15] |
| * set mipi0 src clock 0x6: SCLK_MPLL |
| */ |
| cfg = readl(&clk->src_lcd0); |
| cfg &= ~(0xf << 12); |
| cfg |= (0x6 << 12); |
| writel(cfg, &clk->src_lcd0); |
| |
| /* |
| * CLK_SRC_MASK_LCD0 |
| * FIMD0_MASK [0] |
| * MDNIE0_MASK [4] |
| * MDNIE_PWM0_MASK [8] |
| * MIPI0_MASK [12] |
| * set src mask mipi0 0x1: Unmask |
| */ |
| cfg = readl(&clk->src_mask_lcd0); |
| cfg |= (0x1 << 12); |
| writel(cfg, &clk->src_mask_lcd0); |
| |
| /* |
| * CLK_GATE_IP_LCD0 |
| * CLK_FIMD0 [0] |
| * CLK_MIE0 [1] |
| * CLK_MDNIE0 [2] |
| * CLK_DSIM0 [3] |
| * CLK_SMMUFIMD0 [4] |
| * CLK_PPMULCD0 [5] |
| * Gating all clocks for MIPI0 |
| */ |
| cfg = readl(&clk->gate_ip_lcd0); |
| cfg |= 1 << 3; |
| writel(cfg, &clk->gate_ip_lcd0); |
| |
| /* |
| * CLK_DIV_LCD0 |
| * FIMD0_RATIO [3:0] |
| * MDNIE0_RATIO [7:4] |
| * MDNIE_PWM0_RATIO [11:8] |
| * MDNIE_PWM_PRE_RATIO [15:12] |
| * MIPI0_RATIO [19:16] |
| * MIPI0_PRE_RATIO [23:20] |
| * set mipi ratio |
| */ |
| cfg &= ~(0xf << 16); |
| cfg |= (0x1 << 16); |
| writel(cfg, &clk->div_lcd0); |
| } |
| |
| /* |
| * I2C |
| * |
| * exynos5: obtaining the I2C clock |
| */ |
| static unsigned long exynos5_get_i2c_clk(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned long aclk_66, aclk_66_pre, sclk; |
| unsigned int ratio; |
| |
| sclk = get_pll_clk(MPLL); |
| |
| ratio = (readl(&clk->div_top1)) >> 24; |
| ratio &= 0x7; |
| aclk_66_pre = sclk / (ratio + 1); |
| ratio = readl(&clk->div_top0); |
| ratio &= 0x7; |
| aclk_66 = aclk_66_pre / (ratio + 1); |
| return aclk_66; |
| } |
| |
| int exynos5_set_epll_clk(unsigned long rate) |
| { |
| unsigned int epll_con, epll_con_k; |
| unsigned int i; |
| unsigned int lockcnt; |
| unsigned int start; |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| |
| epll_con = readl(&clk->epll_con0); |
| epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK << |
| EPLL_CON0_LOCK_DET_EN_SHIFT) | |
| EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT | |
| EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT | |
| EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT); |
| |
| for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) { |
| if (exynos5_epll_div[i].freq_out == rate) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(exynos5_epll_div)) |
| return -1; |
| |
| epll_con_k = exynos5_epll_div[i].k_dsm << 0; |
| epll_con |= exynos5_epll_div[i].en_lock_det << |
| EPLL_CON0_LOCK_DET_EN_SHIFT; |
| epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT; |
| epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT; |
| epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT; |
| |
| /* |
| * Required period ( in cycles) to genarate a stable clock output. |
| * The maximum clock time can be up to 3000 * PDIV cycles of PLLs |
| * frequency input (as per spec) |
| */ |
| lockcnt = 3000 * exynos5_epll_div[i].p_div; |
| |
| writel(lockcnt, &clk->epll_lock); |
| writel(epll_con, &clk->epll_con0); |
| writel(epll_con_k, &clk->epll_con1); |
| |
| start = get_timer(0); |
| |
| while (!(readl(&clk->epll_con0) & |
| (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) { |
| if (get_timer(start) > TIMEOUT_EPLL_LOCK) { |
| debug("%s: Timeout waiting for EPLL lock\n", __func__); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| void exynos5_set_i2s_clk_source(void) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| |
| clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, |
| (CLK_SRC_SCLK_EPLL)); |
| } |
| |
| int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, |
| unsigned int dst_frq) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| unsigned int div; |
| |
| if ((dst_frq == 0) || (src_frq == 0)) { |
| debug("%s: Invalid requency input for prescaler\n", __func__); |
| debug("src frq = %d des frq = %d ", src_frq, dst_frq); |
| return -1; |
| } |
| |
| div = (src_frq / dst_frq); |
| if (div > AUDIO_1_RATIO_MASK) { |
| debug("%s: Frequency ratio is out of range\n", __func__); |
| debug("src frq = %d des frq = %d ", src_frq, dst_frq); |
| return -1; |
| } |
| clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, |
| (div & AUDIO_1_RATIO_MASK)); |
| return 0; |
| } |
| |
| /** |
| * Linearly searches for the most accurate main and fine stage clock scalars |
| * (divisors) for a specified target frequency and scalar bit sizes by checking |
| * all multiples of main_scalar_bits values. Will always return scalars up to or |
| * slower than target. |
| * |
| * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32 |
| * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32 |
| * @param input_freq Clock frequency to be scaled in Hz |
| * @param target_freq Desired clock frequency in Hz |
| * @param best_fine_scalar Pointer to store the fine stage divisor |
| * |
| * @return best_main_scalar Main scalar for desired frequency or -1 if none |
| * found |
| */ |
| static int clock_calc_best_scalar(unsigned int main_scaler_bits, |
| unsigned int fine_scalar_bits, unsigned int input_rate, |
| unsigned int target_rate, unsigned int *best_fine_scalar) |
| { |
| int i; |
| int best_main_scalar = -1; |
| unsigned int best_error = target_rate; |
| const unsigned int cap = (1 << fine_scalar_bits) - 1; |
| const unsigned int loops = 1 << main_scaler_bits; |
| |
| debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate, |
| target_rate, cap); |
| |
| assert(best_fine_scalar != NULL); |
| assert(main_scaler_bits <= fine_scalar_bits); |
| |
| *best_fine_scalar = 1; |
| |
| if (input_rate == 0 || target_rate == 0) |
| return -1; |
| |
| if (target_rate >= input_rate) |
| return 1; |
| |
| for (i = 1; i <= loops; i++) { |
| const unsigned int effective_div = max(min(input_rate / i / |
| target_rate, cap), 1); |
| const unsigned int effective_rate = input_rate / i / |
| effective_div; |
| const int error = target_rate - effective_rate; |
| |
| debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, |
| effective_rate, error); |
| |
| if (error >= 0 && error <= best_error) { |
| best_error = error; |
| best_main_scalar = i; |
| *best_fine_scalar = effective_div; |
| } |
| } |
| |
| return best_main_scalar; |
| } |
| |
| static int exynos5_set_spi_clk(enum periph_id periph_id, |
| unsigned int rate) |
| { |
| struct exynos5_clock *clk = |
| (struct exynos5_clock *)samsung_get_base_clock(); |
| int main; |
| unsigned int fine; |
| unsigned shift, pre_shift; |
| unsigned mask = 0xff; |
| u32 *reg; |
| |
| main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); |
| if (main < 0) { |
| debug("%s: Cannot set clock rate for periph %d", |
| __func__, periph_id); |
| return -1; |
| } |
| main = main - 1; |
| fine = fine - 1; |
| |
| switch (periph_id) { |
| case PERIPH_ID_SPI0: |
| reg = &clk->div_peric1; |
| shift = 0; |
| pre_shift = 8; |
| break; |
| case PERIPH_ID_SPI1: |
| reg = &clk->div_peric1; |
| shift = 16; |
| pre_shift = 24; |
| break; |
| case PERIPH_ID_SPI2: |
| reg = &clk->div_peric2; |
| shift = 0; |
| pre_shift = 8; |
| break; |
| case PERIPH_ID_SPI3: |
| reg = &clk->sclk_div_isp; |
| shift = 0; |
| pre_shift = 4; |
| break; |
| case PERIPH_ID_SPI4: |
| reg = &clk->sclk_div_isp; |
| shift = 12; |
| pre_shift = 16; |
| break; |
| default: |
| debug("%s: Unsupported peripheral ID %d\n", __func__, |
| periph_id); |
| return -1; |
| } |
| clrsetbits_le32(reg, mask << shift, (main & mask) << shift); |
| clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift); |
| |
| return 0; |
| } |
| |
| static unsigned long exynos4_get_i2c_clk(void) |
| { |
| struct exynos4_clock *clk = |
| (struct exynos4_clock *)samsung_get_base_clock(); |
| unsigned long sclk, aclk_100; |
| unsigned int ratio; |
| |
| sclk = get_pll_clk(APLL); |
| |
| ratio = (readl(&clk->div_top)) >> 4; |
| ratio &= 0xf; |
| aclk_100 = sclk / (ratio + 1); |
| return aclk_100; |
| } |
| |
| unsigned long get_pll_clk(int pllreg) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_get_pll_clk(pllreg); |
| else { |
| if (proid_is_exynos4412()) |
| return exynos4x12_get_pll_clk(pllreg); |
| return exynos4_get_pll_clk(pllreg); |
| } |
| } |
| |
| unsigned long get_arm_clk(void) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_get_arm_clk(); |
| else { |
| if (proid_is_exynos4412()) |
| return exynos4x12_get_arm_clk(); |
| return exynos4_get_arm_clk(); |
| } |
| } |
| |
| unsigned long get_i2c_clk(void) |
| { |
| if (cpu_is_exynos5()) { |
| return exynos5_get_i2c_clk(); |
| } else if (cpu_is_exynos4()) { |
| return exynos4_get_i2c_clk(); |
| } else { |
| debug("I2C clock is not set for this CPU\n"); |
| return 0; |
| } |
| } |
| |
| unsigned long get_pwm_clk(void) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_get_pwm_clk(); |
| else { |
| if (proid_is_exynos4412()) |
| return exynos4x12_get_pwm_clk(); |
| return exynos4_get_pwm_clk(); |
| } |
| } |
| |
| unsigned long get_uart_clk(int dev_index) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_get_uart_clk(dev_index); |
| else { |
| if (proid_is_exynos4412()) |
| return exynos4x12_get_uart_clk(dev_index); |
| return exynos4_get_uart_clk(dev_index); |
| } |
| } |
| |
| unsigned long get_mmc_clk(int dev_index) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_get_mmc_clk(dev_index); |
| else |
| return exynos4_get_mmc_clk(dev_index); |
| } |
| |
| void set_mmc_clk(int dev_index, unsigned int div) |
| { |
| if (cpu_is_exynos5()) |
| exynos5_set_mmc_clk(dev_index, div); |
| else { |
| if (proid_is_exynos4412()) |
| exynos4x12_set_mmc_clk(dev_index, div); |
| exynos4_set_mmc_clk(dev_index, div); |
| } |
| } |
| |
| unsigned long get_lcd_clk(void) |
| { |
| if (cpu_is_exynos4()) |
| return exynos4_get_lcd_clk(); |
| else |
| return exynos5_get_lcd_clk(); |
| } |
| |
| void set_lcd_clk(void) |
| { |
| if (cpu_is_exynos4()) |
| exynos4_set_lcd_clk(); |
| else |
| exynos5_set_lcd_clk(); |
| } |
| |
| void set_mipi_clk(void) |
| { |
| if (cpu_is_exynos4()) |
| exynos4_set_mipi_clk(); |
| } |
| |
| int set_spi_clk(int periph_id, unsigned int rate) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_set_spi_clk(periph_id, rate); |
| else |
| return 0; |
| } |
| |
| int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) |
| { |
| |
| if (cpu_is_exynos5()) |
| return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq); |
| else |
| return 0; |
| } |
| |
| void set_i2s_clk_source(void) |
| { |
| if (cpu_is_exynos5()) |
| exynos5_set_i2s_clk_source(); |
| } |
| |
| int set_epll_clk(unsigned long rate) |
| { |
| if (cpu_is_exynos5()) |
| return exynos5_set_epll_clk(rate); |
| else |
| return 0; |
| } |