| /* |
| * This file define a set of standard wireless extensions |
| * |
| * Version : 22 16.3.07 |
| * |
| * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> |
| * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. |
| */ |
| |
| #ifndef _LINUX_WIRELESS_H |
| #define _LINUX_WIRELESS_H |
| |
| /************************** DOCUMENTATION **************************/ |
| /* |
| * Initial APIs (1996 -> onward) : |
| * ----------------------------- |
| * Basically, the wireless extensions are for now a set of standard ioctl |
| * call + /proc/net/wireless |
| * |
| * The entry /proc/net/wireless give statistics and information on the |
| * driver. |
| * This is better than having each driver having its entry because |
| * its centralised and we may remove the driver module safely. |
| * |
| * Ioctl are used to configure the driver and issue commands. This is |
| * better than command line options of insmod because we may want to |
| * change dynamically (while the driver is running) some parameters. |
| * |
| * The ioctl mechanimsm are copied from standard devices ioctl. |
| * We have the list of command plus a structure descibing the |
| * data exchanged... |
| * Note that to add these ioctl, I was obliged to modify : |
| * # net/core/dev.c (two place + add include) |
| * # net/ipv4/af_inet.c (one place + add include) |
| * |
| * /proc/net/wireless is a copy of /proc/net/dev. |
| * We have a structure for data passed from the driver to /proc/net/wireless |
| * Too add this, I've modified : |
| * # net/core/dev.c (two other places) |
| * # include/linux/netdevice.h (one place) |
| * # include/linux/proc_fs.h (one place) |
| * |
| * New driver API (2002 -> onward) : |
| * ------------------------------- |
| * This file is only concerned with the user space API and common definitions. |
| * The new driver API is defined and documented in : |
| * # include/net/iw_handler.h |
| * |
| * Note as well that /proc/net/wireless implementation has now moved in : |
| * # net/core/wireless.c |
| * |
| * Wireless Events (2002 -> onward) : |
| * -------------------------------- |
| * Events are defined at the end of this file, and implemented in : |
| * # net/core/wireless.c |
| * |
| * Other comments : |
| * -------------- |
| * Do not add here things that are redundant with other mechanisms |
| * (drivers init, ifconfig, /proc/net/dev, ...) and with are not |
| * wireless specific. |
| * |
| * These wireless extensions are not magic : each driver has to provide |
| * support for them... |
| * |
| * IMPORTANT NOTE : As everything in the kernel, this is very much a |
| * work in progress. Contact me if you have ideas of improvements... |
| */ |
| |
| /***************************** INCLUDES *****************************/ |
| |
| #include <linux/types.h> /* for __u* and __s* typedefs */ |
| #include <linux/socket.h> /* for "struct sockaddr" et al */ |
| #include <linux/if.h> /* for IFNAMSIZ and co... */ |
| |
| /***************************** VERSION *****************************/ |
| /* |
| * This constant is used to know the availability of the wireless |
| * extensions and to know which version of wireless extensions it is |
| * (there is some stuff that will be added in the future...) |
| * I just plan to increment with each new version. |
| */ |
| #define WIRELESS_EXT 22 |
| |
| /* |
| * Changes : |
| * |
| * V2 to V3 |
| * -------- |
| * Alan Cox start some incompatibles changes. I've integrated a bit more. |
| * - Encryption renamed to Encode to avoid US regulation problems |
| * - Frequency changed from float to struct to avoid problems on old 386 |
| * |
| * V3 to V4 |
| * -------- |
| * - Add sensitivity |
| * |
| * V4 to V5 |
| * -------- |
| * - Missing encoding definitions in range |
| * - Access points stuff |
| * |
| * V5 to V6 |
| * -------- |
| * - 802.11 support (ESSID ioctls) |
| * |
| * V6 to V7 |
| * -------- |
| * - define IW_ESSID_MAX_SIZE and IW_MAX_AP |
| * |
| * V7 to V8 |
| * -------- |
| * - Changed my e-mail address |
| * - More 802.11 support (nickname, rate, rts, frag) |
| * - List index in frequencies |
| * |
| * V8 to V9 |
| * -------- |
| * - Support for 'mode of operation' (ad-hoc, managed...) |
| * - Support for unicast and multicast power saving |
| * - Change encoding to support larger tokens (>64 bits) |
| * - Updated iw_params (disable, flags) and use it for NWID |
| * - Extracted iw_point from iwreq for clarity |
| * |
| * V9 to V10 |
| * --------- |
| * - Add PM capability to range structure |
| * - Add PM modifier : MAX/MIN/RELATIVE |
| * - Add encoding option : IW_ENCODE_NOKEY |
| * - Add TxPower ioctls (work like TxRate) |
| * |
| * V10 to V11 |
| * ---------- |
| * - Add WE version in range (help backward/forward compatibility) |
| * - Add retry ioctls (work like PM) |
| * |
| * V11 to V12 |
| * ---------- |
| * - Add SIOCSIWSTATS to get /proc/net/wireless programatically |
| * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space |
| * - Add new statistics (frag, retry, beacon) |
| * - Add average quality (for user space calibration) |
| * |
| * V12 to V13 |
| * ---------- |
| * - Document creation of new driver API. |
| * - Extract union iwreq_data from struct iwreq (for new driver API). |
| * - Rename SIOCSIWNAME as SIOCSIWCOMMIT |
| * |
| * V13 to V14 |
| * ---------- |
| * - Wireless Events support : define struct iw_event |
| * - Define additional specific event numbers |
| * - Add "addr" and "param" fields in union iwreq_data |
| * - AP scanning stuff (SIOCSIWSCAN and friends) |
| * |
| * V14 to V15 |
| * ---------- |
| * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg |
| * - Make struct iw_freq signed (both m & e), add explicit padding |
| * - Add IWEVCUSTOM for driver specific event/scanning token |
| * - Add IW_MAX_GET_SPY for driver returning a lot of addresses |
| * - Add IW_TXPOW_RANGE for range of Tx Powers |
| * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points |
| * - Add IW_MODE_MONITOR for passive monitor |
| * |
| * V15 to V16 |
| * ---------- |
| * - Increase the number of bitrates in iw_range to 32 (for 802.11g) |
| * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) |
| * - Reshuffle struct iw_range for increases, add filler |
| * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses |
| * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support |
| * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" |
| * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index |
| * |
| * V16 to V17 |
| * ---------- |
| * - Add flags to frequency -> auto/fixed |
| * - Document (struct iw_quality *)->updated, add new flags (INVALID) |
| * - Wireless Event capability in struct iw_range |
| * - Add support for relative TxPower (yick !) |
| * |
| * V17 to V18 (From Jouni Malinen <j@w1.fi>) |
| * ---------- |
| * - Add support for WPA/WPA2 |
| * - Add extended encoding configuration (SIOCSIWENCODEEXT and |
| * SIOCGIWENCODEEXT) |
| * - Add SIOCSIWGENIE/SIOCGIWGENIE |
| * - Add SIOCSIWMLME |
| * - Add SIOCSIWPMKSA |
| * - Add struct iw_range bit field for supported encoding capabilities |
| * - Add optional scan request parameters for SIOCSIWSCAN |
| * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA |
| * related parameters (extensible up to 4096 parameter values) |
| * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, |
| * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND |
| * |
| * V18 to V19 |
| * ---------- |
| * - Remove (struct iw_point *)->pointer from events and streams |
| * - Remove header includes to help user space |
| * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 |
| * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros |
| * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM |
| * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros |
| * |
| * V19 to V20 |
| * ---------- |
| * - RtNetlink requests support (SET/GET) |
| * |
| * V20 to V21 |
| * ---------- |
| * - Remove (struct net_device *)->get_wireless_stats() |
| * - Change length in ESSID and NICK to strlen() instead of strlen()+1 |
| * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers |
| * - Power/Retry relative values no longer * 100000 |
| * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI |
| * |
| * V21 to V22 |
| * ---------- |
| * - Prevent leaking of kernel space in stream on 64 bits. |
| */ |
| |
| /**************************** CONSTANTS ****************************/ |
| |
| /* -------------------------- IOCTL LIST -------------------------- */ |
| |
| /* Wireless Identification */ |
| #define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ |
| #define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ |
| /* SIOCGIWNAME is used to verify the presence of Wireless Extensions. |
| * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... |
| * Don't put the name of your driver there, it's useless. */ |
| |
| /* Basic operations */ |
| #define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ |
| #define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ |
| #define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ |
| #define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ |
| #define SIOCSIWMODE 0x8B06 /* set operation mode */ |
| #define SIOCGIWMODE 0x8B07 /* get operation mode */ |
| #define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ |
| #define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ |
| |
| /* Informative stuff */ |
| #define SIOCSIWRANGE 0x8B0A /* Unused */ |
| #define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ |
| #define SIOCSIWPRIV 0x8B0C /* Unused */ |
| #define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ |
| #define SIOCSIWSTATS 0x8B0E /* Unused */ |
| #define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ |
| /* SIOCGIWSTATS is strictly used between user space and the kernel, and |
| * is never passed to the driver (i.e. the driver will never see it). */ |
| |
| /* Spy support (statistics per MAC address - used for Mobile IP support) */ |
| #define SIOCSIWSPY 0x8B10 /* set spy addresses */ |
| #define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ |
| #define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ |
| #define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ |
| |
| /* Access Point manipulation */ |
| #define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ |
| #define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ |
| #define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ |
| #define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ |
| #define SIOCGIWSCAN 0x8B19 /* get scanning results */ |
| |
| /* 802.11 specific support */ |
| #define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ |
| #define SIOCGIWESSID 0x8B1B /* get ESSID */ |
| #define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ |
| #define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ |
| /* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit |
| * within the 'iwreq' structure, so we need to use the 'data' member to |
| * point to a string in user space, like it is done for RANGE... */ |
| |
| /* Other parameters useful in 802.11 and some other devices */ |
| #define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ |
| #define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ |
| #define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ |
| #define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ |
| #define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ |
| #define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ |
| #define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ |
| #define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ |
| #define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ |
| #define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ |
| |
| /* Encoding stuff (scrambling, hardware security, WEP...) */ |
| #define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ |
| #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ |
| /* Power saving stuff (power management, unicast and multicast) */ |
| #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ |
| #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ |
| |
| /* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). |
| * This ioctl uses struct iw_point and data buffer that includes IE id and len |
| * fields. More than one IE may be included in the request. Setting the generic |
| * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers |
| * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers |
| * are required to report the used IE as a wireless event, e.g., when |
| * associating with an AP. */ |
| #define SIOCSIWGENIE 0x8B30 /* set generic IE */ |
| #define SIOCGIWGENIE 0x8B31 /* get generic IE */ |
| |
| /* WPA : IEEE 802.11 MLME requests */ |
| #define SIOCSIWMLME 0x8B16 /* request MLME operation; uses |
| * struct iw_mlme */ |
| /* WPA : Authentication mode parameters */ |
| #define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ |
| #define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ |
| |
| /* WPA : Extended version of encoding configuration */ |
| #define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ |
| #define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ |
| |
| /* WPA2 : PMKSA cache management */ |
| #define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ |
| |
| /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ |
| |
| /* These 32 ioctl are wireless device private, for 16 commands. |
| * Each driver is free to use them for whatever purpose it chooses, |
| * however the driver *must* export the description of those ioctls |
| * with SIOCGIWPRIV and *must* use arguments as defined below. |
| * If you don't follow those rules, DaveM is going to hate you (reason : |
| * it make mixed 32/64bit operation impossible). |
| */ |
| #define SIOCIWFIRSTPRIV 0x8BE0 |
| #define SIOCIWLASTPRIV 0x8BFF |
| /* Previously, we were using SIOCDEVPRIVATE, but we now have our |
| * separate range because of collisions with other tools such as |
| * 'mii-tool'. |
| * We now have 32 commands, so a bit more space ;-). |
| * Also, all 'even' commands are only usable by root and don't return the |
| * content of ifr/iwr to user (but you are not obliged to use the set/get |
| * convention, just use every other two command). More details in iwpriv.c. |
| * And I repeat : you are not forced to use them with iwpriv, but you |
| * must be compliant with it. |
| */ |
| |
| /* ------------------------- IOCTL STUFF ------------------------- */ |
| |
| /* The first and the last (range) */ |
| #define SIOCIWFIRST 0x8B00 |
| #define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ |
| #define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) |
| |
| /* Odd : get (world access), even : set (root access) */ |
| #define IW_IS_SET(cmd) (!((cmd) & 0x1)) |
| #define IW_IS_GET(cmd) ((cmd) & 0x1) |
| |
| /* ----------------------- WIRELESS EVENTS ----------------------- */ |
| /* Those are *NOT* ioctls, do not issue request on them !!! */ |
| /* Most events use the same identifier as ioctl requests */ |
| |
| #define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ |
| #define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ |
| #define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ |
| #define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ |
| #define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ |
| #define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) |
| * (scan results); This includes id and |
| * length fields. One IWEVGENIE may |
| * contain more than one IE. Scan |
| * results may contain one or more |
| * IWEVGENIE events. */ |
| #define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure |
| * (struct iw_michaelmicfailure) |
| */ |
| #define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. |
| * The data includes id and length |
| * fields and may contain more than one |
| * IE. This event is required in |
| * Managed mode if the driver |
| * generates its own WPA/RSN IE. This |
| * should be sent just before |
| * IWEVREGISTERED event for the |
| * association. */ |
| #define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association |
| * Response. The data includes id and |
| * length fields and may contain more |
| * than one IE. This may be sent |
| * between IWEVASSOCREQIE and |
| * IWEVREGISTERED events for the |
| * association. */ |
| #define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN |
| * pre-authentication |
| * (struct iw_pmkid_cand) */ |
| |
| #define IWEVFIRST 0x8C00 |
| #define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) |
| |
| /* ------------------------- PRIVATE INFO ------------------------- */ |
| /* |
| * The following is used with SIOCGIWPRIV. It allow a driver to define |
| * the interface (name, type of data) for its private ioctl. |
| * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV |
| */ |
| |
| #define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ |
| #define IW_PRIV_TYPE_NONE 0x0000 |
| #define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ |
| #define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ |
| #define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ |
| #define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ |
| #define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ |
| |
| #define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ |
| |
| #define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ |
| |
| /* |
| * Note : if the number of args is fixed and the size < 16 octets, |
| * instead of passing a pointer we will put args in the iwreq struct... |
| */ |
| |
| /* ----------------------- OTHER CONSTANTS ----------------------- */ |
| |
| /* Maximum frequencies in the range struct */ |
| #define IW_MAX_FREQUENCIES 32 |
| /* Note : if you have something like 80 frequencies, |
| * don't increase this constant and don't fill the frequency list. |
| * The user will be able to set by channel anyway... */ |
| |
| /* Maximum bit rates in the range struct */ |
| #define IW_MAX_BITRATES 32 |
| |
| /* Maximum tx powers in the range struct */ |
| #define IW_MAX_TXPOWER 8 |
| /* Note : if you more than 8 TXPowers, just set the max and min or |
| * a few of them in the struct iw_range. */ |
| |
| /* Maximum of address that you may set with SPY */ |
| #define IW_MAX_SPY 8 |
| |
| /* Maximum of address that you may get in the |
| list of access points in range */ |
| #define IW_MAX_AP 64 |
| |
| /* Maximum size of the ESSID and NICKN strings */ |
| #define IW_ESSID_MAX_SIZE 32 |
| |
| /* Modes of operation */ |
| #define IW_MODE_AUTO 0 /* Let the driver decides */ |
| #define IW_MODE_ADHOC 1 /* Single cell network */ |
| #define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ |
| #define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ |
| #define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ |
| #define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ |
| #define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ |
| #define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ |
| |
| /* Statistics flags (bitmask in updated) */ |
| #define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ |
| #define IW_QUAL_LEVEL_UPDATED 0x02 |
| #define IW_QUAL_NOISE_UPDATED 0x04 |
| #define IW_QUAL_ALL_UPDATED 0x07 |
| #define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ |
| #define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ |
| #define IW_QUAL_LEVEL_INVALID 0x20 |
| #define IW_QUAL_NOISE_INVALID 0x40 |
| #define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ |
| #define IW_QUAL_ALL_INVALID 0x70 |
| |
| /* Frequency flags */ |
| #define IW_FREQ_AUTO 0x00 /* Let the driver decides */ |
| #define IW_FREQ_FIXED 0x01 /* Force a specific value */ |
| |
| /* Maximum number of size of encoding token available |
| * they are listed in the range structure */ |
| #define IW_MAX_ENCODING_SIZES 8 |
| |
| /* Maximum size of the encoding token in bytes */ |
| #define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ |
| |
| /* Flags for encoding (along with the token) */ |
| #define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ |
| #define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ |
| #define IW_ENCODE_MODE 0xF000 /* Modes defined below */ |
| #define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ |
| #define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ |
| #define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ |
| #define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ |
| #define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ |
| #define IW_ENCODE_TEMP 0x0400 /* Temporary key */ |
| |
| /* Power management flags available (along with the value, if any) */ |
| #define IW_POWER_ON 0x0000 /* No details... */ |
| #define IW_POWER_TYPE 0xF000 /* Type of parameter */ |
| #define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ |
| #define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ |
| #define IW_POWER_MODE 0x0F00 /* Power Management mode */ |
| #define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ |
| #define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ |
| #define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ |
| #define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ |
| #define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ |
| #define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ |
| #define IW_POWER_MIN 0x0001 /* Value is a minimum */ |
| #define IW_POWER_MAX 0x0002 /* Value is a maximum */ |
| #define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ |
| |
| /* Transmit Power flags available */ |
| #define IW_TXPOW_TYPE 0x00FF /* Type of value */ |
| #define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ |
| #define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ |
| #define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ |
| #define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ |
| |
| /* Retry limits and lifetime flags available */ |
| #define IW_RETRY_ON 0x0000 /* No details... */ |
| #define IW_RETRY_TYPE 0xF000 /* Type of parameter */ |
| #define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ |
| #define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ |
| #define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ |
| #define IW_RETRY_MIN 0x0001 /* Value is a minimum */ |
| #define IW_RETRY_MAX 0x0002 /* Value is a maximum */ |
| #define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ |
| #define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ |
| #define IW_RETRY_LONG 0x0020 /* Value is for long packets */ |
| |
| /* Scanning request flags */ |
| #define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ |
| #define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ |
| #define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ |
| #define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ |
| #define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ |
| #define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ |
| #define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ |
| #define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ |
| #define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ |
| /* struct iw_scan_req scan_type */ |
| #define IW_SCAN_TYPE_ACTIVE 0 |
| #define IW_SCAN_TYPE_PASSIVE 1 |
| /* Maximum size of returned data */ |
| #define IW_SCAN_MAX_DATA 4096 /* In bytes */ |
| |
| /* Scan capability flags - in (struct iw_range *)->scan_capa */ |
| #define IW_SCAN_CAPA_NONE 0x00 |
| #define IW_SCAN_CAPA_ESSID 0x01 |
| #define IW_SCAN_CAPA_BSSID 0x02 |
| #define IW_SCAN_CAPA_CHANNEL 0x04 |
| #define IW_SCAN_CAPA_MODE 0x08 |
| #define IW_SCAN_CAPA_RATE 0x10 |
| #define IW_SCAN_CAPA_TYPE 0x20 |
| #define IW_SCAN_CAPA_TIME 0x40 |
| |
| /* Max number of char in custom event - use multiple of them if needed */ |
| #define IW_CUSTOM_MAX 256 /* In bytes */ |
| |
| /* Generic information element */ |
| #define IW_GENERIC_IE_MAX 1024 |
| |
| /* MLME requests (SIOCSIWMLME / struct iw_mlme) */ |
| #define IW_MLME_DEAUTH 0 |
| #define IW_MLME_DISASSOC 1 |
| #define IW_MLME_AUTH 2 |
| #define IW_MLME_ASSOC 3 |
| |
| /* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ |
| #define IW_AUTH_INDEX 0x0FFF |
| #define IW_AUTH_FLAGS 0xF000 |
| /* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) |
| * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the |
| * parameter that is being set/get to; value will be read/written to |
| * struct iw_param value field) */ |
| #define IW_AUTH_WPA_VERSION 0 |
| #define IW_AUTH_CIPHER_PAIRWISE 1 |
| #define IW_AUTH_CIPHER_GROUP 2 |
| #define IW_AUTH_KEY_MGMT 3 |
| #define IW_AUTH_TKIP_COUNTERMEASURES 4 |
| #define IW_AUTH_DROP_UNENCRYPTED 5 |
| #define IW_AUTH_80211_AUTH_ALG 6 |
| #define IW_AUTH_WPA_ENABLED 7 |
| #define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 |
| #define IW_AUTH_ROAMING_CONTROL 9 |
| #define IW_AUTH_PRIVACY_INVOKED 10 |
| #define IW_AUTH_CIPHER_GROUP_MGMT 11 |
| #define IW_AUTH_MFP 12 |
| |
| /* IW_AUTH_WPA_VERSION values (bit field) */ |
| #define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 |
| #define IW_AUTH_WPA_VERSION_WPA 0x00000002 |
| #define IW_AUTH_WPA_VERSION_WPA2 0x00000004 |
| |
| /* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT |
| * values (bit field) */ |
| #define IW_AUTH_CIPHER_NONE 0x00000001 |
| #define IW_AUTH_CIPHER_WEP40 0x00000002 |
| #define IW_AUTH_CIPHER_TKIP 0x00000004 |
| #define IW_AUTH_CIPHER_CCMP 0x00000008 |
| #define IW_AUTH_CIPHER_WEP104 0x00000010 |
| #define IW_AUTH_CIPHER_AES_CMAC 0x00000020 |
| |
| /* IW_AUTH_KEY_MGMT values (bit field) */ |
| #define IW_AUTH_KEY_MGMT_802_1X 1 |
| #define IW_AUTH_KEY_MGMT_PSK 2 |
| |
| /* IW_AUTH_80211_AUTH_ALG values (bit field) */ |
| #define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 |
| #define IW_AUTH_ALG_SHARED_KEY 0x00000002 |
| #define IW_AUTH_ALG_LEAP 0x00000004 |
| |
| /* IW_AUTH_ROAMING_CONTROL values */ |
| #define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ |
| #define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming |
| * control */ |
| |
| /* IW_AUTH_MFP (management frame protection) values */ |
| #define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ |
| #define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ |
| #define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ |
| |
| /* SIOCSIWENCODEEXT definitions */ |
| #define IW_ENCODE_SEQ_MAX_SIZE 8 |
| /* struct iw_encode_ext ->alg */ |
| #define IW_ENCODE_ALG_NONE 0 |
| #define IW_ENCODE_ALG_WEP 1 |
| #define IW_ENCODE_ALG_TKIP 2 |
| #define IW_ENCODE_ALG_CCMP 3 |
| #define IW_ENCODE_ALG_PMK 4 |
| #define IW_ENCODE_ALG_AES_CMAC 5 |
| /* struct iw_encode_ext ->ext_flags */ |
| #define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 |
| #define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 |
| #define IW_ENCODE_EXT_GROUP_KEY 0x00000004 |
| #define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 |
| |
| /* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ |
| #define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ |
| #define IW_MICFAILURE_GROUP 0x00000004 |
| #define IW_MICFAILURE_PAIRWISE 0x00000008 |
| #define IW_MICFAILURE_STAKEY 0x00000010 |
| #define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) |
| */ |
| |
| /* Bit field values for enc_capa in struct iw_range */ |
| #define IW_ENC_CAPA_WPA 0x00000001 |
| #define IW_ENC_CAPA_WPA2 0x00000002 |
| #define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 |
| #define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 |
| #define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 |
| |
| /* Event capability macros - in (struct iw_range *)->event_capa |
| * Because we have more than 32 possible events, we use an array of |
| * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ |
| #define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ |
| (cmd - SIOCIWFIRSTPRIV + 0x60) : \ |
| (cmd - SIOCSIWCOMMIT)) |
| #define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) |
| #define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) |
| /* Event capability constants - event autogenerated by the kernel |
| * This list is valid for most 802.11 devices, customise as needed... */ |
| #define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ |
| IW_EVENT_CAPA_MASK(0x8B06) | \ |
| IW_EVENT_CAPA_MASK(0x8B1A)) |
| #define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) |
| /* "Easy" macro to set events in iw_range (less efficient) */ |
| #define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) |
| #define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } |
| |
| |
| /****************************** TYPES ******************************/ |
| |
| /* --------------------------- SUBTYPES --------------------------- */ |
| /* |
| * Generic format for most parameters that fit in an int |
| */ |
| struct iw_param |
| { |
| __s32 value; /* The value of the parameter itself */ |
| __u8 fixed; /* Hardware should not use auto select */ |
| __u8 disabled; /* Disable the feature */ |
| __u16 flags; /* Various specifc flags (if any) */ |
| }; |
| |
| /* |
| * For all data larger than 16 octets, we need to use a |
| * pointer to memory allocated in user space. |
| */ |
| struct iw_point |
| { |
| void *pointer; /* Pointer to the data (in user space) */ |
| __u16 length; /* number of fields or size in bytes */ |
| __u16 flags; /* Optional params */ |
| }; |
| |
| |
| /* |
| * A frequency |
| * For numbers lower than 10^9, we encode the number in 'm' and |
| * set 'e' to 0 |
| * For number greater than 10^9, we divide it by the lowest power |
| * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... |
| * The power of 10 is in 'e', the result of the division is in 'm'. |
| */ |
| struct iw_freq |
| { |
| __s32 m; /* Mantissa */ |
| __s16 e; /* Exponent */ |
| __u8 i; /* List index (when in range struct) */ |
| __u8 flags; /* Flags (fixed/auto) */ |
| }; |
| |
| /* |
| * Quality of the link |
| */ |
| struct iw_quality |
| { |
| __u8 qual; /* link quality (%retries, SNR, |
| %missed beacons or better...) */ |
| __u8 level; /* signal level (dBm) */ |
| __u8 noise; /* noise level (dBm) */ |
| __u8 updated; /* Flags to know if updated */ |
| }; |
| |
| /* |
| * Packet discarded in the wireless adapter due to |
| * "wireless" specific problems... |
| * Note : the list of counter and statistics in net_device_stats |
| * is already pretty exhaustive, and you should use that first. |
| * This is only additional stats... |
| */ |
| struct iw_discarded |
| { |
| __u32 nwid; /* Rx : Wrong nwid/essid */ |
| __u32 code; /* Rx : Unable to code/decode (WEP) */ |
| __u32 fragment; /* Rx : Can't perform MAC reassembly */ |
| __u32 retries; /* Tx : Max MAC retries num reached */ |
| __u32 misc; /* Others cases */ |
| }; |
| |
| /* |
| * Packet/Time period missed in the wireless adapter due to |
| * "wireless" specific problems... |
| */ |
| struct iw_missed |
| { |
| __u32 beacon; /* Missed beacons/superframe */ |
| }; |
| |
| /* |
| * Quality range (for spy threshold) |
| */ |
| struct iw_thrspy |
| { |
| struct sockaddr addr; /* Source address (hw/mac) */ |
| struct iw_quality qual; /* Quality of the link */ |
| struct iw_quality low; /* Low threshold */ |
| struct iw_quality high; /* High threshold */ |
| }; |
| |
| /* |
| * Optional data for scan request |
| * |
| * Note: these optional parameters are controlling parameters for the |
| * scanning behavior, these do not apply to getting scan results |
| * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and |
| * provide a merged results with all BSSes even if the previous scan |
| * request limited scanning to a subset, e.g., by specifying an SSID. |
| * Especially, scan results are required to include an entry for the |
| * current BSS if the driver is in Managed mode and associated with an AP. |
| */ |
| struct iw_scan_req |
| { |
| __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ |
| __u8 essid_len; |
| __u8 num_channels; /* num entries in channel_list; |
| * 0 = scan all allowed channels */ |
| __u8 flags; /* reserved as padding; use zero, this may |
| * be used in the future for adding flags |
| * to request different scan behavior */ |
| struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or |
| * individual address of a specific BSS */ |
| |
| /* |
| * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using |
| * the current ESSID. This allows scan requests for specific ESSID |
| * without having to change the current ESSID and potentially breaking |
| * the current association. |
| */ |
| __u8 essid[IW_ESSID_MAX_SIZE]; |
| |
| /* |
| * Optional parameters for changing the default scanning behavior. |
| * These are based on the MLME-SCAN.request from IEEE Std 802.11. |
| * TU is 1.024 ms. If these are set to 0, driver is expected to use |
| * reasonable default values. min_channel_time defines the time that |
| * will be used to wait for the first reply on each channel. If no |
| * replies are received, next channel will be scanned after this. If |
| * replies are received, total time waited on the channel is defined by |
| * max_channel_time. |
| */ |
| __u32 min_channel_time; /* in TU */ |
| __u32 max_channel_time; /* in TU */ |
| |
| struct iw_freq channel_list[IW_MAX_FREQUENCIES]; |
| }; |
| |
| /* ------------------------- WPA SUPPORT ------------------------- */ |
| |
| /* |
| * Extended data structure for get/set encoding (this is used with |
| * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* |
| * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and |
| * only the data contents changes (key data -> this structure, including |
| * key data). |
| * |
| * If the new key is the first group key, it will be set as the default |
| * TX key. Otherwise, default TX key index is only changed if |
| * IW_ENCODE_EXT_SET_TX_KEY flag is set. |
| * |
| * Key will be changed with SIOCSIWENCODEEXT in all cases except for |
| * special "change TX key index" operation which is indicated by setting |
| * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. |
| * |
| * tx_seq/rx_seq are only used when respective |
| * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal |
| * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start |
| * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally |
| * used only by an Authenticator (AP or an IBSS station) to get the |
| * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and |
| * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for |
| * debugging/testing. |
| */ |
| struct iw_encode_ext |
| { |
| __u32 ext_flags; /* IW_ENCODE_EXT_* */ |
| __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ |
| __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ |
| struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast |
| * (group) keys or unicast address for |
| * individual keys */ |
| __u16 alg; /* IW_ENCODE_ALG_* */ |
| __u16 key_len; |
| __u8 key[0]; |
| }; |
| |
| /* SIOCSIWMLME data */ |
| struct iw_mlme |
| { |
| __u16 cmd; /* IW_MLME_* */ |
| __u16 reason_code; |
| struct sockaddr addr; |
| }; |
| |
| /* SIOCSIWPMKSA data */ |
| #define IW_PMKSA_ADD 1 |
| #define IW_PMKSA_REMOVE 2 |
| #define IW_PMKSA_FLUSH 3 |
| |
| #define IW_PMKID_LEN 16 |
| |
| struct iw_pmksa |
| { |
| __u32 cmd; /* IW_PMKSA_* */ |
| struct sockaddr bssid; |
| __u8 pmkid[IW_PMKID_LEN]; |
| }; |
| |
| /* IWEVMICHAELMICFAILURE data */ |
| struct iw_michaelmicfailure |
| { |
| __u32 flags; |
| struct sockaddr src_addr; |
| __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ |
| }; |
| |
| /* IWEVPMKIDCAND data */ |
| #define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ |
| struct iw_pmkid_cand |
| { |
| __u32 flags; /* IW_PMKID_CAND_* */ |
| __u32 index; /* the smaller the index, the higher the |
| * priority */ |
| struct sockaddr bssid; |
| }; |
| |
| /* ------------------------ WIRELESS STATS ------------------------ */ |
| /* |
| * Wireless statistics (used for /proc/net/wireless) |
| */ |
| struct iw_statistics |
| { |
| __u16 status; /* Status |
| * - device dependent for now */ |
| |
| struct iw_quality qual; /* Quality of the link |
| * (instant/mean/max) */ |
| struct iw_discarded discard; /* Packet discarded counts */ |
| struct iw_missed miss; /* Packet missed counts */ |
| }; |
| |
| /* ------------------------ IOCTL REQUEST ------------------------ */ |
| /* |
| * This structure defines the payload of an ioctl, and is used |
| * below. |
| * |
| * Note that this structure should fit on the memory footprint |
| * of iwreq (which is the same as ifreq), which mean a max size of |
| * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... |
| * You should check this when increasing the structures defined |
| * above in this file... |
| */ |
| union iwreq_data |
| { |
| /* Config - generic */ |
| char name[IFNAMSIZ]; |
| /* Name : used to verify the presence of wireless extensions. |
| * Name of the protocol/provider... */ |
| |
| struct iw_point essid; /* Extended network name */ |
| struct iw_param nwid; /* network id (or domain - the cell) */ |
| struct iw_freq freq; /* frequency or channel : |
| * 0-1000 = channel |
| * > 1000 = frequency in Hz */ |
| |
| struct iw_param sens; /* signal level threshold */ |
| struct iw_param bitrate; /* default bit rate */ |
| struct iw_param txpower; /* default transmit power */ |
| struct iw_param rts; /* RTS threshold threshold */ |
| struct iw_param frag; /* Fragmentation threshold */ |
| __u32 mode; /* Operation mode */ |
| struct iw_param retry; /* Retry limits & lifetime */ |
| |
| struct iw_point encoding; /* Encoding stuff : tokens */ |
| struct iw_param power; /* PM duration/timeout */ |
| struct iw_quality qual; /* Quality part of statistics */ |
| |
| struct sockaddr ap_addr; /* Access point address */ |
| struct sockaddr addr; /* Destination address (hw/mac) */ |
| |
| struct iw_param param; /* Other small parameters */ |
| struct iw_point data; /* Other large parameters */ |
| }; |
| |
| /* |
| * The structure to exchange data for ioctl. |
| * This structure is the same as 'struct ifreq', but (re)defined for |
| * convenience... |
| * Do I need to remind you about structure size (32 octets) ? |
| */ |
| struct iwreq |
| { |
| union |
| { |
| char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ |
| } ifr_ifrn; |
| |
| /* Data part (defined just above) */ |
| union iwreq_data u; |
| }; |
| |
| /* -------------------------- IOCTL DATA -------------------------- */ |
| /* |
| * For those ioctl which want to exchange mode data that what could |
| * fit in the above structure... |
| */ |
| |
| /* |
| * Range of parameters |
| */ |
| |
| struct iw_range |
| { |
| /* Informative stuff (to choose between different interface) */ |
| __u32 throughput; /* To give an idea... */ |
| /* In theory this value should be the maximum benchmarked |
| * TCP/IP throughput, because with most of these devices the |
| * bit rate is meaningless (overhead an co) to estimate how |
| * fast the connection will go and pick the fastest one. |
| * I suggest people to play with Netperf or any benchmark... |
| */ |
| |
| /* NWID (or domain id) */ |
| __u32 min_nwid; /* Minimal NWID we are able to set */ |
| __u32 max_nwid; /* Maximal NWID we are able to set */ |
| |
| /* Old Frequency (backward compat - moved lower ) */ |
| __u16 old_num_channels; |
| __u8 old_num_frequency; |
| |
| /* Scan capabilities */ |
| __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ |
| |
| /* Wireless event capability bitmasks */ |
| __u32 event_capa[6]; |
| |
| /* signal level threshold range */ |
| __s32 sensitivity; |
| |
| /* Quality of link & SNR stuff */ |
| /* Quality range (link, level, noise) |
| * If the quality is absolute, it will be in the range [0 ; max_qual], |
| * if the quality is dBm, it will be in the range [max_qual ; 0]. |
| * Don't forget that we use 8 bit arithmetics... */ |
| struct iw_quality max_qual; /* Quality of the link */ |
| /* This should contain the average/typical values of the quality |
| * indicator. This should be the threshold between a "good" and |
| * a "bad" link (example : monitor going from green to orange). |
| * Currently, user space apps like quality monitors don't have any |
| * way to calibrate the measurement. With this, they can split |
| * the range between 0 and max_qual in different quality level |
| * (using a geometric subdivision centered on the average). |
| * I expect that people doing the user space apps will feedback |
| * us on which value we need to put in each driver... */ |
| struct iw_quality avg_qual; /* Quality of the link */ |
| |
| /* Rates */ |
| __u8 num_bitrates; /* Number of entries in the list */ |
| __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ |
| |
| /* RTS threshold */ |
| __s32 min_rts; /* Minimal RTS threshold */ |
| __s32 max_rts; /* Maximal RTS threshold */ |
| |
| /* Frag threshold */ |
| __s32 min_frag; /* Minimal frag threshold */ |
| __s32 max_frag; /* Maximal frag threshold */ |
| |
| /* Power Management duration & timeout */ |
| __s32 min_pmp; /* Minimal PM period */ |
| __s32 max_pmp; /* Maximal PM period */ |
| __s32 min_pmt; /* Minimal PM timeout */ |
| __s32 max_pmt; /* Maximal PM timeout */ |
| __u16 pmp_flags; /* How to decode max/min PM period */ |
| __u16 pmt_flags; /* How to decode max/min PM timeout */ |
| __u16 pm_capa; /* What PM options are supported */ |
| |
| /* Encoder stuff */ |
| __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ |
| __u8 num_encoding_sizes; /* Number of entry in the list */ |
| __u8 max_encoding_tokens; /* Max number of tokens */ |
| /* For drivers that need a "login/passwd" form */ |
| __u8 encoding_login_index; /* token index for login token */ |
| |
| /* Transmit power */ |
| __u16 txpower_capa; /* What options are supported */ |
| __u8 num_txpower; /* Number of entries in the list */ |
| __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ |
| |
| /* Wireless Extension version info */ |
| __u8 we_version_compiled; /* Must be WIRELESS_EXT */ |
| __u8 we_version_source; /* Last update of source */ |
| |
| /* Retry limits and lifetime */ |
| __u16 retry_capa; /* What retry options are supported */ |
| __u16 retry_flags; /* How to decode max/min retry limit */ |
| __u16 r_time_flags; /* How to decode max/min retry life */ |
| __s32 min_retry; /* Minimal number of retries */ |
| __s32 max_retry; /* Maximal number of retries */ |
| __s32 min_r_time; /* Minimal retry lifetime */ |
| __s32 max_r_time; /* Maximal retry lifetime */ |
| |
| /* Frequency */ |
| __u16 num_channels; /* Number of channels [0; num - 1] */ |
| __u8 num_frequency; /* Number of entry in the list */ |
| struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ |
| /* Note : this frequency list doesn't need to fit channel numbers, |
| * because each entry contain its channel index */ |
| |
| __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ |
| }; |
| |
| /* |
| * Private ioctl interface information |
| */ |
| |
| struct iw_priv_args |
| { |
| __u32 cmd; /* Number of the ioctl to issue */ |
| __u16 set_args; /* Type and number of args */ |
| __u16 get_args; /* Type and number of args */ |
| char name[IFNAMSIZ]; /* Name of the extension */ |
| }; |
| |
| /* ----------------------- WIRELESS EVENTS ----------------------- */ |
| /* |
| * Wireless events are carried through the rtnetlink socket to user |
| * space. They are encapsulated in the IFLA_WIRELESS field of |
| * a RTM_NEWLINK message. |
| */ |
| |
| /* |
| * A Wireless Event. Contains basically the same data as the ioctl... |
| */ |
| struct iw_event |
| { |
| __u16 len; /* Real length of this stuff */ |
| __u16 cmd; /* Wireless IOCTL */ |
| union iwreq_data u; /* IOCTL fixed payload */ |
| }; |
| |
| /* Size of the Event prefix (including padding and alignement junk) */ |
| #define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) |
| /* Size of the various events */ |
| #define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) |
| #define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) |
| #define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) |
| #define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) |
| #define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) |
| #define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) |
| |
| /* iw_point events are special. First, the payload (extra data) come at |
| * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, |
| * we omit the pointer, so start at an offset. */ |
| #define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ |
| (char *) NULL) |
| #define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ |
| IW_EV_POINT_OFF) |
| |
| |
| /* Size of the Event prefix when packed in stream */ |
| #define IW_EV_LCP_PK_LEN (4) |
| /* Size of the various events when packed in stream */ |
| #define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) |
| #define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) |
| #define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) |
| #define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) |
| #define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) |
| #define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) |
| #define IW_EV_POINT_PK_LEN (IW_EV_LCP_LEN + 4) |
| |
| #endif /* _LINUX_WIRELESS_H */ |