blob: f409ccf7b1617018777fe1dac9c693c7ef2181e0 [file] [log] [blame]
'\"
'\" Copyright (c) 1997 DSC Technologies Corporation
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" @(#) timefield.n 1.0 97/04/30 16:04:44
'\"
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .HS name section [date [version]]
'\" Replacement for .TH in other man pages. See below for valid
'\" section names.
'\"
'\" .AP type name in/out [indent]
'\" Start paragraph describing an argument to a library procedure.
'\" type is type of argument (int, etc.), in/out is either "in", "out",
'\" or "in/out" to describe whether procedure reads or modifies arg,
'\" and indent is equivalent to second arg of .IP (shouldn't ever be
'\" needed; use .AS below instead)
'\"
'\" .AS [type [name]]
'\" Give maximum sizes of arguments for setting tab stops. Type and
'\" name are examples of largest possible arguments that will be passed
'\" to .AP later. If args are omitted, default tab stops are used.
'\"
'\" .BS
'\" Start box enclosure. From here until next .BE, everything will be
'\" enclosed in one large box.
'\"
'\" .BE
'\" End of box enclosure.
'\"
'\" .VS
'\" Begin vertical sidebar, for use in marking newly-changed parts
'\" of man pages.
'\"
'\" .VE
'\" End of vertical sidebar.
'\"
'\" .DS
'\" Begin an indented unfilled display.
'\"
'\" .DE
'\" End of indented unfilled display.
'\"
'\" @(#) man.macros 1.1 94/08/09 13:07:19
.\"
'\" # Heading for Tcl/Tk man pages
.de HS
.ds ^3 \\0
.if !"\\$3"" .ds ^3 \\$3
.if '\\$2'cmds' .TH "\\$1" 1 "\\*(^3" "\\$4" "\\$5"
.if '\\$2'lib' .TH "\\$1" 3 "\\*(^3" "\\$4" "\\$5"
.if '\\$2'ncmds' .TH "\\$1" n "\\*(^3" "\\$4" "\\$5"
.if '\\$2'tcl' .TH "\\$1" n "\\*(^3" Tcl "Tcl Built-In Commands"
.if '\\$2'tk' .TH "\\$1" n "\\*(^3" Tk "Tk Commands"
.if '\\$2'tclc' .TH "\\$1" 3 "\\*(^3" Tcl "Tcl Library Procedures"
.if '\\$2'tkc' .TH "\\$1" 3 "\\*(^3" Tk "Tk Library Procedures"
.if '\\$2'tclcmds' .TH "\\$1" 1 "\\*(^3" Tk "Tcl Applications"
.if '\\$2'tkcmds' .TH "\\$1" 1 "\\*(^3" Tk "Tk Applications"
.if '\\$2'iwid' .TH "\\$1" 1 "\\*(^3" Tk "[incr Widgets]"
.if t .wh -1.3i ^B
.nr ^l \\n(.l
.ad b
..
'\" # Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
. ie !"\\$2"" .TP \\n()Cu
. el .TP 15
.\}
.ie !"\\$3"" \{\
.ta \\n()Au \\n()Bu
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1 \\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\" # define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
'\" # BS - start boxed text
'\" # ^y = starting y location
'\" # ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\" # BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\" Draw four-sided box normally, but don't draw top of
.\" box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\" # VS - start vertical sidebar
'\" # ^Y = starting y location
'\" # ^v = 1 (for troff; for nroff this doesn't matter)
.de VS
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\" # VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\" # Special macro to handle page bottom: finish off current
'\" # box/sidebar if in box/sidebar mode, then invoked standard
'\" # page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\" Draw three-sided box if this is the box's first page,
.\" draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\" # DS - begin display
.de DS
.RS
.nf
.sp
..
'\" # DE - end display
.de DE
.fi
.RE
.sp
..
.HS iwidgets::timefield iwid
.BS
'\" Note: do not modify the .SH NAME line immediately below!
.SH NAME
iwidgets::timefield \- Create and manipulate a time field widget
.SH SYNOPSIS
\fBiwidgets::timefield\fI \fIpathName \fR?\fIoptions\fR?
.SH "INHERITANCE"
itk::Widget <- iwidgets::LabeledWidget <- iwidgets::Timefield
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fB
background borderWidth cursor exportSelection
foreground highlightColor highlightThickness insertBackground
justify relief\fR
.fi
.LP
See the "options" manual entry for details on the standard options.
.SH "INHERITED OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fBdisabledForeground\fR \fBlabelBitmap\fR \fBlabelFont\fR \fBlabelImage\fR
\fBlabelMargin\fR \fBlabelPos\fR \fBlabelText\fR \fBlabelVariable\fR
\fBstate\fR \fBsticky\fR
.fi
.LP
See the "labeledwidget" class manual entry for details on the
inherited options.
.SH "WIDGET-SPECIFIC OPTIONS"
.LP
.nf
Name: \fBchildSitePos\fR
Class: \fBPosition\fR
Command-Line Switch: \fB-childsitepos\fR
.fi
.IP
Specifies the position of the child site in the time field: \fBn\fR,
\fBs\fR, \fBe\fR, or \fBw\fR. The default is e.
.LP
.nf
Name: \fBcommand\fR
Class: \fBCommand\fR
Command-Line Switch: \fB-command\fR
.fi
.IP
Specifies a Tcl command to be executed upon detection of a Return key
press event.
.LP
.nf
Name: \fBgmt\fR
Class: \fBGmt\fR
Command-Line Switch: \fB-gmt\fR
.fi
.IP
Determines whether the time is calculated relative to Greenwich
Mean Time. Accepts a boolean value. The default is no.
.fi
.IP
Name: \fBstate\fR
Class: \fBState\fR
Command-Line Switch: \fB-state\fR
.fi
.IP
Specifies one of two states for the timefield: \fBnormal\fR or \fBdisabled\fR.
If the timefield is disabled then input is not accepted. The default is
normal.
.LP
.nf
Name: \fBtextBackground\fR
Class: \fBBackground\fR
Command-Line Switch: \fB-textbackground\fR
.fi
.IP
Background color for inside textual portion of the entry field. The value
may be given in any of the forms acceptable to \fBTk_GetColor\fR.
.LP
.nf
Name: \fBtextFont\fR
Class: \fBFont\fR
Command-Line Switch: \fB-textfont\fR
.fi
.IP
Name of font to use for display of text in timefield. The value
may be given in any of the forms acceptable to \fBTk_GetFont\fR.
.LP
.BE
.SH DESCRIPTION
.PP
The \fBiwidgets::timefield\fR command creates an enhanced text entry widget for
the purpose of time entry with various degrees of built-in intelligence.
.DE
.SH "METHODS"
.PP
The \fBiwidgets::timefield\fR command creates a new Tcl command whose
name is \fIpathName\fR. This
command may be used to invoke various
operations on the widget. It has the following general form:
.DS C
\fIpathName option \fR?\fIarg arg ...\fR?
.DE
\fIOption\fR and the \fIarg\fRs
determine the exact behavior of the command. The following
commands are possible for timefield widgets:
.SH "WIDGET-SPECIFIC METHODS"
.TP
\fIpathName \fBcget\fR \fIoption\fR
Returns the current value of the configuration option given
by \fIoption\fR.
\fIOption\fR may have any of the values accepted by the \fBiwidgets::timefield\fR
command.
.TP
\fIpathName\fR \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
Query or modify the configuration options of the widget.
If no \fIoption\fR is specified, returns a list describing all of
the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
information on the format of this list). If \fIoption\fR is specified
with no \fIvalue\fR, then the command returns a list describing the
one named option (this list will be identical to the corresponding
sublist of the value returned if no \fIoption\fR is specified). If
one or more \fIoption\-value\fR pairs are specified, then the command
modifies the given widget option(s) to have the given value(s); in
this case the command returns an empty string.
\fIOption\fR may have any of the values accepted by the \fBiwidgets::timefield\fR
command.
.TP
\fIpathName \fBget\fR ?\fBformat\fR?
Returns the current contents of the timefield in a format of
string or as an integer clock value using the \fB-string\fR and \fB-clicks\fR
format options respectively. The default is by string. Reference the
clock command for more information on obtaining times and their
formats.
.TP
\fIpathName \fBisvalid\fR
Returns a boolean indication of the validity of the currently
displayed time value. For example, 12:59:59 is valid whereas
25:59:59 is invalid.
.TP
\fIpathName \fBshow\fR \fItime\fR
Changes the currently displayed time to be that of the time
argument. The time may be specified either as a string, an
integer clock value or the keyword "now" (the default).
Reference the clock command for more information on obtaining
times and their formats.
.SH "COMPONENTS"
.LP
.nf
Name: \fBtime\fR
Class: \fBEntry\fR
.fi
.IP
The time component provides the entry field for time input and display.
See the "entry" widget manual entry for details on the time component item.
.fi
.SH EXAMPLE
.DS
package require Iwidgets 4.0
proc returnCmd {} {
puts [.tf get]
}
iwidgets::timefield .tf -command returnCmd
pack .tf -fill x -expand yes -padx 10 -pady 10
.DE
.SH AUTHOR
John A. Tucker
.DE
Mark L. Ulferts
.LP
.SH KEYWORDS
timefield, widget