blob: 68b54ee89f1fabfc4ed667f3d033f52826dfba9e [file] [log] [blame]
'\"
'\" Copyright (c) 1997 DSC Technologies Corporation
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" @(#) dateentry.n 1.0 97/04/30 16:04:44
'\"
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .HS name section [date [version]]
'\" Replacement for .TH in other man pages. See below for valid
'\" section names.
'\"
'\" .AP type name in/out [indent]
'\" Start paragraph describing an argument to a library procedure.
'\" type is type of argument (int, etc.), in/out is either "in", "out",
'\" or "in/out" to describe whether procedure reads or modifies arg,
'\" and indent is equivalent to second arg of .IP (shouldn't ever be
'\" needed; use .AS below instead)
'\"
'\" .AS [type [name]]
'\" Give maximum sizes of arguments for setting tab stops. Type and
'\" name are examples of largest possible arguments that will be passed
'\" to .AP later. If args are omitted, default tab stops are used.
'\"
'\" .BS
'\" Start box enclosure. From here until next .BE, everything will be
'\" enclosed in one large box.
'\"
'\" .BE
'\" End of box enclosure.
'\"
'\" .VS
'\" Begin vertical sidebar, for use in marking newly-changed parts
'\" of man pages.
'\"
'\" .VE
'\" End of vertical sidebar.
'\"
'\" .DS
'\" Begin an indented unfilled display.
'\"
'\" .DE
'\" End of indented unfilled display.
'\"
'\" @(#) man.macros 1.1 94/08/09 13:07:19
.\"
'\" # Heading for Tcl/Tk man pages
.de HS
.ds ^3 \\0
.if !"\\$3"" .ds ^3 \\$3
.if '\\$2'cmds' .TH "\\$1" 1 "\\*(^3" "\\$4" "\\$5"
.if '\\$2'lib' .TH "\\$1" 3 "\\*(^3" "\\$4" "\\$5"
.if '\\$2'ncmds' .TH "\\$1" n "\\*(^3" "\\$4" "\\$5"
.if '\\$2'tcl' .TH "\\$1" n "\\*(^3" Tcl "Tcl Built-In Commands"
.if '\\$2'tk' .TH "\\$1" n "\\*(^3" Tk "Tk Commands"
.if '\\$2'tclc' .TH "\\$1" 3 "\\*(^3" Tcl "Tcl Library Procedures"
.if '\\$2'tkc' .TH "\\$1" 3 "\\*(^3" Tk "Tk Library Procedures"
.if '\\$2'tclcmds' .TH "\\$1" 1 "\\*(^3" Tk "Tcl Applications"
.if '\\$2'tkcmds' .TH "\\$1" 1 "\\*(^3" Tk "Tk Applications"
.if '\\$2'iwid' .TH "\\$1" 1 "\\*(^3" Tk "[incr Widgets]"
.if t .wh -1.3i ^B
.nr ^l \\n(.l
.ad b
..
'\" # Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
. ie !"\\$2"" .TP \\n()Cu
. el .TP 15
.\}
.ie !"\\$3"" \{\
.ta \\n()Au \\n()Bu
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1 \\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\" # define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
'\" # BS - start boxed text
'\" # ^y = starting y location
'\" # ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\" # BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\" Draw four-sided box normally, but don't draw top of
.\" box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\" # VS - start vertical sidebar
'\" # ^Y = starting y location
'\" # ^v = 1 (for troff; for nroff this doesn't matter)
.de VS
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\" # VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\" # Special macro to handle page bottom: finish off current
'\" # box/sidebar if in box/sidebar mode, then invoked standard
'\" # page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\" Draw three-sided box if this is the box's first page,
.\" draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\" # DS - begin display
.de DS
.RS
.nf
.sp
..
'\" # DE - end display
.de DE
.fi
.RE
.sp
..
.HS iwidgets::dateentry iwid
.BS
'\" Note: do not modify the .SH NAME line immediately below!
.SH NAME
iwidgets::dateentry \- Create and manipulate a dateentry widget
.SH SYNOPSIS
\fBiwidgets::dateentry\fI \fIpathName \fR?\fIoptions\fR?
.SH "INHERITANCE"
itk::Widget <- iwidgets::LabeledWidget <- iwidgets::Datefield <- iwidgets::Dateentry
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fB
background borderWidth cursor exportSelection
foreground highlightColor highlightThickness insertBackground
justify relief\fR
.fi
.LP
See the "options" manual entry for details on the standard options.
.SH "INHERITED OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fBdisabledForeground\fR \fBint\fR \fBlabelBitmap\fR \fBlabelFont\fR
\fBlabelImage\fR \fBlabelMargin\fR \fBlabelPos\fR \fBlabelText\fR
\fBlabelVariable\fR \fBstate\fR \fBsticky\fR
.fi
.LP
See the "labeledwidget" class manual entry for details on these
inherited options.
.LP
.nf
.ta 4c 8c 12c
\fBcommand\fR \fBiq\fR \fBstate\fR \fBtextBackground\fR
\fBtextFont\fR
.fi
.LP
See the "datefield" class manual entry for details on these
inherited options.
.SH "ASSOCIATED OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fBbackwardImage\fR \fBbuttonForeground\fR \fBcommand\fR \fBcurrentDateFont\fR
\fBdateFont\fR \fBdayFont\fR \fBdays\fR \fBforwardImage\fR
\fBoutline\fR \fBselectColor\fR \fBselectThickness\fR \fBstartDay\fR
\fBtitleFont\fR \fBweekdayBackground\fR \fBweekendBackground\fR
.fi
.LP
See the "calendar" manual entry for details on the associated options.
.SH "WIDGET-SPECIFIC OPTIONS"
.LP
.nf
Name: \fBgrab\fR
Class: \fBGrab\fR
Command-Line Switch: \fB-grab\fR
.fi
.IP
Specifies the grab level, \fBlocal\fR or \fBglobal\fR, to be obtained before
bringing up the popup calendar. The default is global. For more information
concerning grab levels, consult the documentation for Tk's \fBgrab\fR command.
.LP
.nf
Name: \fBicon\fR
Class: \fBIcon\fR
Command-Line Switch: \fB-icon\fR
.fi
.IP
Specifies the calendar icon image to be used in the dateentry.
This image must have been created previously with
the \fBimage create\fR command. Should one not be provided,
then one will be generated, pixmap if possible, bitmap otherwise.
.LP
.BE
.SH DESCRIPTION
.PP
The \fBiwidgets::dateentry\fR command creates a quicken style date entry field
with a popup calendar by combining the datefield and calendar
widgets together. This allows a user to enter the date via the
keyboard or by using the mouse and selecting the calendar icon
which brings up a popup calendar.
.DE
.SH "METHODS"
.PP
The \fBiwidgets::dateentry\fR command creates a new Tcl command whose
name is \fIpathName\fR. This
command may be used to invoke various
operations on the widget. It has the following general form:
.DS C
\fIpathName option \fR?\fIarg arg ...\fR?
.DE
\fIOption\fR and the \fIarg\fRs
determine the exact behavior of the command. The following
commands are possible for dateentry widgets:
.SH "INHERITED METHODS"
.LP
.nf
.ta 4c 8c 12c
\fBget\fR \fBisvalid\fR \fBshow\fR
.fi
.LP
See the "datefield" manual entry for details on the associated methods.
.SH "WIDGET-SPECIFIC METHODS"
.TP
\fIpathName \fBcget\fR \fIoption\fR
Returns the current value of the configuration option given
by \fIoption\fR.
\fIOption\fR may have any of the values accepted by the \fBiwidgets::dateentry\fR
command.
.TP
\fIpathName\fR \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
Query or modify the configuration options of the widget.
If no \fIoption\fR is specified, returns a list describing all of
the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
information on the format of this list). If \fIoption\fR is specified
with no \fIvalue\fR, then the command returns a list describing the
one named option (this list will be identical to the corresponding
sublist of the value returned if no \fIoption\fR is specified). If
one or more \fIoption\-value\fR pairs are specified, then the command
modifies the given widget option(s) to have the given value(s); in
this case the command returns an empty string.
\fIOption\fR may have any of the values accepted by the \fBiwidgets::dateentry\fR
command.
.SH "COMPONENTS"
.LP
.nf
Name: \fBlabel\fR
Class: \fBLabel\fR
.fi
.IP
The label component provides a label component to used to identify the date.
See the "label" widget manual entry for details on the label component item.
.LP
.nf
Name: \fBiconbutton\fR
Class: \fBLabel\fR
.fi
.IP
The iconbutton component provides a labelbutton component to act as a
lightweight button
displaying the calendar icon. Upon pressing the labelbutton, the calendar
appears. See the "label" widget manual entry for details on the
labelbutton component item.
.LP
.nf
Name: \fBdate\fR
Class: \fBEntry\fR
.fi
.IP
The date component provides the entry field for date input and display.
See the "entry" widget manual entry for details on the date component item.
.fi
.SH EXAMPLE
.DS
package require Iwidgets 4.0
iwidgets::dateentry .de
pack .de
.DE
.SH AUTHOR
Mark L. Ulferts
.LP
.SH KEYWORDS
dateentry, widget