man/man3/Tk_SetInternalBorder.3 - toolchains/skids - Git at Google

 '\"
 '\" Copyright (c) 1990-1994 The Regents of the University of California.
 '\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
 '\"
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\"
 '\"
 '\" RCS: @(#) $Id: GeomReq.3,v 1.3 2001/09/26 20:25:17 pspjuth Exp $
 '\"
 '\" The definitions below are for supplemental macros used in Tcl/Tk
 '\" manual entries.
 '\"
 '\" .AP type name in/out ?indent?
 '\"	Start paragraph describing an argument to a library procedure.
 '\"	type is type of argument (int, etc.), in/out is either "in", "out",
 '\"	or "in/out" to describe whether procedure reads or modifies arg,
 '\"	and indent is equivalent to second arg of .IP (shouldn't ever be
 '\"	needed;  use .AS below instead)
 '\"
 '\" .AS ?type? ?name?
 '\"	Give maximum sizes of arguments for setting tab stops.  Type and
 '\"	name are examples of largest possible arguments that will be passed
 '\"	to .AP later.  If args are omitted, default tab stops are used.
 '\"
 '\" .BS
 '\"	Start box enclosure.  From here until next .BE, everything will be
 '\"	enclosed in one large box.
 '\"
 '\" .BE
 '\"	End of box enclosure.
 '\"
 '\" .CS
 '\"	Begin code excerpt.
 '\"
 '\" .CE
 '\"	End code excerpt.
 '\"
 '\" .VS ?version? ?br?
 '\"	Begin vertical sidebar, for use in marking newly-changed parts
 '\"	of man pages.  The first argument is ignored and used for recording
 '\"	the version when the .VS was added, so that the sidebars can be
 '\"	found and removed when they reach a certain age.  If another argument
 '\"	is present, then a line break is forced before starting the sidebar.
 '\"
 '\" .VE
 '\"	End of vertical sidebar.
 '\"
 '\" .DS
 '\"	Begin an indented unfilled display.
 '\"
 '\" .DE
 '\"	End of indented unfilled display.
 '\"
 '\" .SO
 '\"	Start of list of standard options for a Tk widget.  The
 '\"	options follow on successive lines, in four columns separated
 '\"	by tabs.
 '\"
 '\" .SE
 '\"	End of list of standard options for a Tk widget.
 '\"
 '\" .OP cmdName dbName dbClass
 '\"	Start of description of a specific option.  cmdName gives the
 '\"	option's name as specified in the class command, dbName gives
 '\"	the option's name in the option database, and dbClass gives
 '\"	the option's class in the option database.
 '\"
 '\" .UL arg1 arg2
 '\"	Print arg1 underlined, then print arg2 normally.
 '\"
 '\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
 '\"
 '\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
 .if t .wh -1.3i ^B
 .nr ^l \n(.l
 .ad b
 '\"	# Start an argument description
 .de AP
 .ie !"\\$4"" .TP \\$4
 .el \{\
 .   ie !"\\$2"" .TP \\n()Cu
 .   el          .TP 15
 .\}
 .ta \\n()Au \\n()Bu
 .ie !"\\$3"" \{\
 \&\\$1	\\fI\\$2\\fP	(\\$3)
 .\".b
 .\}
 .el \{\
 .br
 .ie !"\\$2"" \{\
 \&\\$1	\\fI\\$2\\fP
 .\}
 .el \{\
 \&\\fI\\$1\\fP
 .\}
 .\}
 ..
 '\"	# define tabbing values for .AP
 .de AS
 .nr )A 10n
 .if !"\\$1"" .nr )A \\w'\\$1'u+3n
 .nr )B \\n()Au+15n
 .\"
 .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
 .nr )C \\n()Bu+\\w'(in/out)'u+2n
 ..
 .AS Tcl_Interp Tcl_CreateInterp in/out
 '\"	# BS - start boxed text
 '\"	# ^y = starting y location
 '\"	# ^b = 1
 .de BS
 .br
 .mk ^y
 .nr ^b 1u
 .if n .nf
 .if n .ti 0
 .if n \l'\\n(.lu\(ul'
 .if n .fi
 ..
 '\"	# BE - end boxed text (draw box now)
 .de BE
 .nf
 .ti 0
 .mk ^t
 .ie n \l'\\n(^lu\(ul'
 .el \{\
 .\"	Draw four-sided box normally, but don't draw top of
 .\"	box if the box started on an earlier page.
 .ie !\\n(^b-1 \{\
 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
 .\}
 .el \}\
 \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
 .\}
 .\}
 .fi
 .br
 .nr ^b 0
 ..
 '\"	# VS - start vertical sidebar
 '\"	# ^Y = starting y location
 '\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
 .de VS
 .if !"\\$2"" .br
 .mk ^Y
 .ie n 'mc \s12\(br\s0
 .el .nr ^v 1u
 ..
 '\"	# VE - end of vertical sidebar
 .de VE
 .ie n 'mc
 .el \{\
 .ev 2
 .nf
 .ti 0
 .mk ^t
 \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
 .sp -1
 .fi
 .ev
 .\}
 .nr ^v 0
 ..
 '\"	# Special macro to handle page bottom:  finish off current
 '\"	# box/sidebar if in box/sidebar mode, then invoked standard
 '\"	# page bottom macro.
 .de ^B
 .ev 2
 'ti 0
 'nf
 .mk ^t
 .if \\n(^b \{\
 .\"	Draw three-sided box if this is the box's first page,
 .\"	draw two sides but no top otherwise.
 .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
 .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
 .\}
 .if \\n(^v \{\
 .nr ^x \\n(^tu+1v-\\n(^Yu
 \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
 .\}
 .bp
 'fi
 .ev
 .if \\n(^b \{\
 .mk ^y
 .nr ^b 2
 .\}
 .if \\n(^v \{\
 .mk ^Y
 .\}
 ..
 '\"	# DS - begin display
 .de DS
 .RS
 .nf
 .sp
 ..
 '\"	# DE - end display
 .de DE
 .fi
 .RE
 .sp
 ..
 '\"	# SO - start of list of standard options
 .de SO
 .SH "STANDARD OPTIONS"
 .LP
 .nf
 .ta 5.5c 11c
 .ft B
 ..
 '\"	# SE - end of list of standard options
 .de SE
 .fi
 .ft R
 .LP
 See the \\fBoptions\\fR manual entry for details on the standard options.
 ..
 '\"	# OP - start of full description for a single option
 .de OP
 .LP
 .nf
 .ta 4c
 Command-Line Name:	\\fB\\$1\\fR
 Database Name:	\\fB\\$2\\fR
 Database Class:	\\fB\\$3\\fR
 .fi
 .IP
 ..
 '\"	# CS - begin code excerpt
 .de CS
 .RS
 .nf
 .ta .25i .5i .75i 1i
 ..
 '\"	# CE - end code excerpt
 .de CE
 .fi
 .RE
 ..
 .de UL
 \\$1\l'|0\(ul'\\$2
 ..
 .TH Tk_GeometryRequest 3 "8.4" Tk "Tk Library Procedures"
 .BS
 .SH NAME
 Tk_GeometryRequest, Tk_SetMinimumRequestSize, Tk_SetInternalBorder, Tk_SetInternalBorderEx \- specify desired geometry or internal border for a window
 .SH SYNOPSIS
 .nf
 \fB#include <tk.h>\fR
 .sp
 \fBTk_GeometryRequest\fR(\fItkwin, reqWidth, reqHeight\fR)
 .sp
 \fBTk_SetMinimumRequestSize\fR(\fItkwin, minWidth, minHeight\fR)
 .sp
 \fBTk_SetInternalBorder\fR(\fItkwin, width\fR)
 .sp
 \fBTk_SetInternalBorderEx\fR(\fItkwin, left, right, top, bottom\fR)
 .SH ARGUMENTS
 .AS baseHeight clientData
 .AP Tk_Window tkwin in
 Window for which geometry is being requested.
 .AP int reqWidth in
 Desired width for \fItkwin\fR, in pixel units.
 .AP int reqHeight in
 Desired height for \fItkwin\fR, in pixel units.
 .AP int minWidth in
 Desired minimum requested width for \fItkwin\fR, in pixel units.
 .AP int minHeight in
 Desired minimum requested height for \fItkwin\fR, in pixel units.
 .AP int width in
 Space to leave for internal border for \fItkwin\fR, in pixel units.
 .AP int left in
 Space to leave for left side of internal border for \fItkwin\fR, in pixel units.
 .AP int right in
 Space to leave for right side of internal border for \fItkwin\fR, in pixel units.
 .AP int top in
 Space to leave for top side of internal border for \fItkwin\fR, in pixel units.
 .AP int bottom in
 Space to leave for bottom side of internal border for \fItkwin\fR, in pixel units.
 .BE

 .SH DESCRIPTION
 .PP
 \fBTk_GeometryRequest\fR is called by widget code to indicate its
 preference for the dimensions of a particular window.  The arguments
 to \fBTk_GeometryRequest\fR are made available to the geometry
 manager for the window, which then decides on the actual geometry
 for the window.  Although geometry managers generally try to satisfy
 requests made to \fBTk_GeometryRequest\fR, there is no guarantee that
 this will always be possible.  Widget code should not assume that
 a geometry request will be satisfied until it receives a
 \fBConfigureNotify\fR event indicating that the geometry change has
 occurred.  Widget code should never call procedures like
 \fBTk_ResizeWindow\fR directly.  Instead, it should invoke
 \fBTk_GeometryRequest\fR and leave the final geometry decisions to
 the geometry manager.
 .PP
 If \fItkwin\fR is a top-level window, then the geometry information
 will be passed to the window manager using the standard ICCCM protocol.
 .PP
 \fBTk_SetInternalBorder\fR is called by widget code to indicate that
 the widget has an internal border.  This means that the widget draws
 a decorative border inside the window instead of using the standard
 X borders, which are external to the window's area.  For example,
 internal borders are used to draw 3-D effects.  \fIWidth\fR
 specifies the width of the border in pixels.  Geometry managers will
 use this information to avoid placing any children of \fItkwin\fR
 overlapping the outermost \fIwidth\fR pixels of \fItkwin\fR's area.
 .PP
 \fBTk_SetInternalBorderEx\fR works like \fBTk_SetInternalBorder\fR
 but lets you specify different widths for different sides of the window.
 .PP
 \fBTk_SetMinimumRequestSize\fR is called by widget code to indicate
 that a geometry manager should request at least this size for the
 widget.  This allows a widget to have some control over its size when
 a propagating geometry manager is used inside it.
 .PP
 The information specified in calls to \fBTk_GeometryRequest\fR,
 \fBTk_SetMinimumRequestSize\fR, \fBTk_SetInternalBorder\fR and
 \fBTk_SetInternalBorderEx\fR can be retrieved using the macros
 \fBTk_ReqWidth\fR, \fBTk_ReqHeight\fR, \fBTk_MinReqWidth\fR,
 \fBTk_MinReqHeight\fR, \fBTk_MinReqWidth\fR, \fBTk_InternalBorderLeft\fR,
 \fBTk_InternalBorderRight\fR, \fBTk_InternalBorderTop\fR and
 \fBTk_InternalBorderBottom\fR.
 See the \fBTk_WindowId\fR manual entry for details.

 .SH KEYWORDS
 geometry, request
	'\"
	'\" Copyright (c) 1990-1994 The Regents of the University of California.
	'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
	'\"
	'\" See the file "license.terms" for information on usage and redistribution
	'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
	'\"
	'\"
	'\" RCS: @(#) $Id: GeomReq.3,v 1.3 2001/09/26 20:25:17 pspjuth Exp $
	'\"
	'\" The definitions below are for supplemental macros used in Tcl/Tk
	'\" manual entries.
	'\"
	'\" .AP type name in/out ?indent?
	'\" Start paragraph describing an argument to a library procedure.
	'\" type is type of argument (int, etc.), in/out is either "in", "out",
	'\" or "in/out" to describe whether procedure reads or modifies arg,
	'\" and indent is equivalent to second arg of .IP (shouldn't ever be
	'\" needed; use .AS below instead)
	'\"
	'\" .AS ?type? ?name?
	'\" Give maximum sizes of arguments for setting tab stops. Type and
	'\" name are examples of largest possible arguments that will be passed
	'\" to .AP later. If args are omitted, default tab stops are used.
	'\"
	'\" .BS
	'\" Start box enclosure. From here until next .BE, everything will be
	'\" enclosed in one large box.
	'\"
	'\" .BE
	'\" End of box enclosure.
	'\"
	'\" .CS
	'\" Begin code excerpt.
	'\"
	'\" .CE
	'\" End code excerpt.
	'\"
	'\" .VS ?version? ?br?
	'\" Begin vertical sidebar, for use in marking newly-changed parts
	'\" of man pages. The first argument is ignored and used for recording
	'\" the version when the .VS was added, so that the sidebars can be
	'\" found and removed when they reach a certain age. If another argument
	'\" is present, then a line break is forced before starting the sidebar.
	'\"
	'\" .VE
	'\" End of vertical sidebar.
	'\"
	'\" .DS
	'\" Begin an indented unfilled display.
	'\"
	'\" .DE
	'\" End of indented unfilled display.
	'\"
	'\" .SO
	'\" Start of list of standard options for a Tk widget. The
	'\" options follow on successive lines, in four columns separated
	'\" by tabs.
	'\"
	'\" .SE
	'\" End of list of standard options for a Tk widget.
	'\"
	'\" .OP cmdName dbName dbClass
	'\" Start of description of a specific option. cmdName gives the
	'\" option's name as specified in the class command, dbName gives
	'\" the option's name in the option database, and dbClass gives
	'\" the option's class in the option database.
	'\"
	'\" .UL arg1 arg2
	'\" Print arg1 underlined, then print arg2 normally.
	'\"
	'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
	'\"
	'\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
	.if t .wh -1.3i ^B
	.nr ^l \n(.l
	.ad b
	'\" # Start an argument description
	.de AP
	.ie !"\\$4"" .TP \\$4
	.el \{\
	. ie !"\\$2"" .TP \\n()Cu
	. el .TP 15
	.\}
	.ta \\n()Au \\n()Bu
	.ie !"\\$3"" \{\
	\&\\$1 \\fI\\$2\\fP (\\$3)
	.\".b
	.\}
	.el \{\
	.br
	.ie !"\\$2"" \{\
	\&\\$1 \\fI\\$2\\fP
	.\}
	.el \{\
	\&\\fI\\$1\\fP
	.\}
	.\}
	..
	'\" # define tabbing values for .AP
	.de AS
	.nr )A 10n
	.if !"\\$1"" .nr )A \\w'\\$1'u+3n
	.nr )B \\n()Au+15n
	.\"
	.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
	.nr )C \\n()Bu+\\w'(in/out)'u+2n
	..
	.AS Tcl_Interp Tcl_CreateInterp in/out
	'\" # BS - start boxed text
	'\" # ^y = starting y location
	'\" # ^b = 1
	.de BS
	.br
	.mk ^y
	.nr ^b 1u
	.if n .nf
	.if n .ti 0
	.if n \l'\\n(.lu\(ul'
	.if n .fi
	..
	'\" # BE - end boxed text (draw box now)
	.de BE
	.nf
	.ti 0
	.mk ^t
	.ie n \l'\\n(^lu\(ul'
	.el \{\
	.\" Draw four-sided box normally, but don't draw top of
	.\" box if the box started on an earlier page.
	.ie !\\n(^b-1 \{\
	\h'-1.5n'\L'\|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'\|0u-1.5n\(ul'
	.\}
	.el \}\
	\h'-1.5n'\L'\|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'\|0u-1.5n\(ul'
	.\}
	.\}
	.fi
	.br
	.nr ^b 0
	..
	'\" # VS - start vertical sidebar
	'\" # ^Y = starting y location
	'\" # ^v = 1 (for troff; for nroff this doesn't matter)
	.de VS
	.if !"\\$2"" .br
	.mk ^Y
	.ie n 'mc \s12\(br\s0
	.el .nr ^v 1u
	..
	'\" # VE - end of vertical sidebar
	.de VE
	.ie n 'mc
	.el \{\
	.ev 2
	.nf
	.ti 0
	.mk ^t
	\h'\|\\n(^lu+3n'\L'\|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-\|\\n(^lu+3n'
	.sp -1
	.fi
	.ev
	.\}
	.nr ^v 0
	..
	'\" # Special macro to handle page bottom: finish off current
	'\" # box/sidebar if in box/sidebar mode, then invoked standard
	'\" # page bottom macro.
	.de ^B
	.ev 2
	'ti 0
	'nf
	.mk ^t
	.if \\n(^b \{\
	.\" Draw three-sided box if this is the box's first page,
	.\" draw two sides but no top otherwise.
	.ie !\\n(^b-1 \h'-1.5n'\L'\|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'\|0u'\c
	.el \h'-1.5n'\L'\|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'\|0u'\c
	.\}
	.if \\n(^v \{\
	.nr ^x \\n(^tu+1v-\\n(^Yu
	\kx\h'-\\nxu'\h'\|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'\|0u'\c
	.\}
	.bp
	'fi
	.ev
	.if \\n(^b \{\
	.mk ^y
	.nr ^b 2
	.\}
	.if \\n(^v \{\
	.mk ^Y
	.\}
	..
	'\" # DS - begin display
	.de DS
	.RS
	.nf
	.sp
	..
	'\" # DE - end display
	.de DE
	.fi
	.RE
	.sp
	..
	'\" # SO - start of list of standard options
	.de SO
	.SH "STANDARD OPTIONS"
	.LP
	.nf
	.ta 5.5c 11c
	.ft B
	..
	'\" # SE - end of list of standard options
	.de SE
	.fi
	.ft R
	.LP
	See the \\fBoptions\\fR manual entry for details on the standard options.
	..
	'\" # OP - start of full description for a single option
	.de OP
	.LP
	.nf
	.ta 4c
	Command-Line Name: \\fB\\$1\\fR
	Database Name: \\fB\\$2\\fR
	Database Class: \\fB\\$3\\fR
	.fi
	.IP
	..
	'\" # CS - begin code excerpt
	.de CS
	.RS
	.nf
	.ta .25i .5i .75i 1i
	..
	'\" # CE - end code excerpt
	.de CE
	.fi
	.RE
	..
	.de UL
	\\$1\l'\|0\(ul'\\$2
	..
	.TH Tk_GeometryRequest 3 "8.4" Tk "Tk Library Procedures"
	.BS
	.SH NAME
	Tk_GeometryRequest, Tk_SetMinimumRequestSize, Tk_SetInternalBorder, Tk_SetInternalBorderEx \- specify desired geometry or internal border for a window
	.SH SYNOPSIS
	.nf
	\fB#include <tk.h>\fR
	.sp
	\fBTk_GeometryRequest\fR(\fItkwin, reqWidth, reqHeight\fR)
	.sp
	\fBTk_SetMinimumRequestSize\fR(\fItkwin, minWidth, minHeight\fR)
	.sp
	\fBTk_SetInternalBorder\fR(\fItkwin, width\fR)
	.sp
	\fBTk_SetInternalBorderEx\fR(\fItkwin, left, right, top, bottom\fR)
	.SH ARGUMENTS
	.AS baseHeight clientData
	.AP Tk_Window tkwin in
	Window for which geometry is being requested.
	.AP int reqWidth in
	Desired width for \fItkwin\fR, in pixel units.
	.AP int reqHeight in
	Desired height for \fItkwin\fR, in pixel units.
	.AP int minWidth in
	Desired minimum requested width for \fItkwin\fR, in pixel units.
	.AP int minHeight in
	Desired minimum requested height for \fItkwin\fR, in pixel units.
	.AP int width in
	Space to leave for internal border for \fItkwin\fR, in pixel units.
	.AP int left in
	Space to leave for left side of internal border for \fItkwin\fR, in pixel units.
	.AP int right in
	Space to leave for right side of internal border for \fItkwin\fR, in pixel units.
	.AP int top in
	Space to leave for top side of internal border for \fItkwin\fR, in pixel units.
	.AP int bottom in
	Space to leave for bottom side of internal border for \fItkwin\fR, in pixel units.
	.BE

	.SH DESCRIPTION
	.PP
	\fBTk_GeometryRequest\fR is called by widget code to indicate its
	preference for the dimensions of a particular window. The arguments
	to \fBTk_GeometryRequest\fR are made available to the geometry
	manager for the window, which then decides on the actual geometry
	for the window. Although geometry managers generally try to satisfy
	requests made to \fBTk_GeometryRequest\fR, there is no guarantee that
	this will always be possible. Widget code should not assume that
	a geometry request will be satisfied until it receives a
	\fBConfigureNotify\fR event indicating that the geometry change has
	occurred. Widget code should never call procedures like
	\fBTk_ResizeWindow\fR directly. Instead, it should invoke
	\fBTk_GeometryRequest\fR and leave the final geometry decisions to
	the geometry manager.
	.PP
	If \fItkwin\fR is a top-level window, then the geometry information
	will be passed to the window manager using the standard ICCCM protocol.
	.PP
	\fBTk_SetInternalBorder\fR is called by widget code to indicate that
	the widget has an internal border. This means that the widget draws
	a decorative border inside the window instead of using the standard
	X borders, which are external to the window's area. For example,
	internal borders are used to draw 3-D effects. \fIWidth\fR
	specifies the width of the border in pixels. Geometry managers will
	use this information to avoid placing any children of \fItkwin\fR
	overlapping the outermost \fIwidth\fR pixels of \fItkwin\fR's area.
	.PP
	\fBTk_SetInternalBorderEx\fR works like \fBTk_SetInternalBorder\fR
	but lets you specify different widths for different sides of the window.
	.PP
	\fBTk_SetMinimumRequestSize\fR is called by widget code to indicate
	that a geometry manager should request at least this size for the
	widget. This allows a widget to have some control over its size when
	a propagating geometry manager is used inside it.
	.PP
	The information specified in calls to \fBTk_GeometryRequest\fR,
	\fBTk_SetMinimumRequestSize\fR, \fBTk_SetInternalBorder\fR and
	\fBTk_SetInternalBorderEx\fR can be retrieved using the macros
	\fBTk_ReqWidth\fR, \fBTk_ReqHeight\fR, \fBTk_MinReqWidth\fR,
	\fBTk_MinReqHeight\fR, \fBTk_MinReqWidth\fR, \fBTk_InternalBorderLeft\fR,
	\fBTk_InternalBorderRight\fR, \fBTk_InternalBorderTop\fR and
	\fBTk_InternalBorderBottom\fR.
	See the \fBTk_WindowId\fR manual entry for details.

	.SH KEYWORDS
	geometry, request