man/man3/Tk_InitStubs.3 - toolchains/skids - Git at Google

 '\"
 '\" Copyright (c) 1999 Scriptics Corportation
 '\"
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\"
 '\" RCS: @(#) $Id: TkInitStubs.3,v 1.2 2001/05/22 00:22:41 hobbs Exp $
 '\"
 '\" The definitions below are for supplemental macros used in Tcl/Tk
 '\" manual entries.
 '\"
 '\" .AP type name in/out ?indent?
 '\"	Start paragraph describing an argument to a library procedure.
 '\"	type is type of argument (int, etc.), in/out is either "in", "out",
 '\"	or "in/out" to describe whether procedure reads or modifies arg,
 '\"	and indent is equivalent to second arg of .IP (shouldn't ever be
 '\"	needed;  use .AS below instead)
 '\"
 '\" .AS ?type? ?name?
 '\"	Give maximum sizes of arguments for setting tab stops.  Type and
 '\"	name are examples of largest possible arguments that will be passed
 '\"	to .AP later.  If args are omitted, default tab stops are used.
 '\"
 '\" .BS
 '\"	Start box enclosure.  From here until next .BE, everything will be
 '\"	enclosed in one large box.
 '\"
 '\" .BE
 '\"	End of box enclosure.
 '\"
 '\" .CS
 '\"	Begin code excerpt.
 '\"
 '\" .CE
 '\"	End code excerpt.
 '\"
 '\" .VS ?version? ?br?
 '\"	Begin vertical sidebar, for use in marking newly-changed parts
 '\"	of man pages.  The first argument is ignored and used for recording
 '\"	the version when the .VS was added, so that the sidebars can be
 '\"	found and removed when they reach a certain age.  If another argument
 '\"	is present, then a line break is forced before starting the sidebar.
 '\"
 '\" .VE
 '\"	End of vertical sidebar.
 '\"
 '\" .DS
 '\"	Begin an indented unfilled display.
 '\"
 '\" .DE
 '\"	End of indented unfilled display.
 '\"
 '\" .SO
 '\"	Start of list of standard options for a Tk widget.  The
 '\"	options follow on successive lines, in four columns separated
 '\"	by tabs.
 '\"
 '\" .SE
 '\"	End of list of standard options for a Tk widget.
 '\"
 '\" .OP cmdName dbName dbClass
 '\"	Start of description of a specific option.  cmdName gives the
 '\"	option's name as specified in the class command, dbName gives
 '\"	the option's name in the option database, and dbClass gives
 '\"	the option's class in the option database.
 '\"
 '\" .UL arg1 arg2
 '\"	Print arg1 underlined, then print arg2 normally.
 '\"
 '\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
 '\"
 '\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
 .if t .wh -1.3i ^B
 .nr ^l \n(.l
 .ad b
 '\"	# Start an argument description
 .de AP
 .ie !"\\$4"" .TP \\$4
 .el \{\
 .   ie !"\\$2"" .TP \\n()Cu
 .   el          .TP 15
 .\}
 .ta \\n()Au \\n()Bu
 .ie !"\\$3"" \{\
 \&\\$1	\\fI\\$2\\fP	(\\$3)
 .\".b
 .\}
 .el \{\
 .br
 .ie !"\\$2"" \{\
 \&\\$1	\\fI\\$2\\fP
 .\}
 .el \{\
 \&\\fI\\$1\\fP
 .\}
 .\}
 ..
 '\"	# define tabbing values for .AP
 .de AS
 .nr )A 10n
 .if !"\\$1"" .nr )A \\w'\\$1'u+3n
 .nr )B \\n()Au+15n
 .\"
 .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
 .nr )C \\n()Bu+\\w'(in/out)'u+2n
 ..
 .AS Tcl_Interp Tcl_CreateInterp in/out
 '\"	# BS - start boxed text
 '\"	# ^y = starting y location
 '\"	# ^b = 1
 .de BS
 .br
 .mk ^y
 .nr ^b 1u
 .if n .nf
 .if n .ti 0
 .if n \l'\\n(.lu\(ul'
 .if n .fi
 ..
 '\"	# BE - end boxed text (draw box now)
 .de BE
 .nf
 .ti 0
 .mk ^t
 .ie n \l'\\n(^lu\(ul'
 .el \{\
 .\"	Draw four-sided box normally, but don't draw top of
 .\"	box if the box started on an earlier page.
 .ie !\\n(^b-1 \{\
 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
 .\}
 .el \}\
 \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
 .\}
 .\}
 .fi
 .br
 .nr ^b 0
 ..
 '\"	# VS - start vertical sidebar
 '\"	# ^Y = starting y location
 '\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
 .de VS
 .if !"\\$2"" .br
 .mk ^Y
 .ie n 'mc \s12\(br\s0
 .el .nr ^v 1u
 ..
 '\"	# VE - end of vertical sidebar
 .de VE
 .ie n 'mc
 .el \{\
 .ev 2
 .nf
 .ti 0
 .mk ^t
 \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
 .sp -1
 .fi
 .ev
 .\}
 .nr ^v 0
 ..
 '\"	# Special macro to handle page bottom:  finish off current
 '\"	# box/sidebar if in box/sidebar mode, then invoked standard
 '\"	# page bottom macro.
 .de ^B
 .ev 2
 'ti 0
 'nf
 .mk ^t
 .if \\n(^b \{\
 .\"	Draw three-sided box if this is the box's first page,
 .\"	draw two sides but no top otherwise.
 .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
 .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
 .\}
 .if \\n(^v \{\
 .nr ^x \\n(^tu+1v-\\n(^Yu
 \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
 .\}
 .bp
 'fi
 .ev
 .if \\n(^b \{\
 .mk ^y
 .nr ^b 2
 .\}
 .if \\n(^v \{\
 .mk ^Y
 .\}
 ..
 '\"	# DS - begin display
 .de DS
 .RS
 .nf
 .sp
 ..
 '\"	# DE - end display
 .de DE
 .fi
 .RE
 .sp
 ..
 '\"	# SO - start of list of standard options
 .de SO
 .SH "STANDARD OPTIONS"
 .LP
 .nf
 .ta 5.5c 11c
 .ft B
 ..
 '\"	# SE - end of list of standard options
 .de SE
 .fi
 .ft R
 .LP
 See the \\fBoptions\\fR manual entry for details on the standard options.
 ..
 '\"	# OP - start of full description for a single option
 .de OP
 .LP
 .nf
 .ta 4c
 Command-Line Name:	\\fB\\$1\\fR
 Database Name:	\\fB\\$2\\fR
 Database Class:	\\fB\\$3\\fR
 .fi
 .IP
 ..
 '\"	# CS - begin code excerpt
 .de CS
 .RS
 .nf
 .ta .25i .5i .75i 1i
 ..
 '\"	# CE - end code excerpt
 .de CE
 .fi
 .RE
 ..
 .de UL
 \\$1\l'|0\(ul'\\$2
 ..
 .TH Tk_InitStubs 3 8.4 Tk "Tk Library Procedures"
 .BS
 .SH NAME
 Tk_InitStubs \- initialize the Tk stubs mechanism
 .SH SYNOPSIS
 .nf
 \fB#include <tk.h>\fR
 .sp
 CONST char *
 \fBTk_InitStubs\fR(\fIinterp, version, exact\fR)
 .SH ARGUMENTS
 .AS Tcl_Interp *interp in
 .AP Tcl_Interp *interp in
 Tcl interpreter handle.
 .AP char *version in
 A version string consisting of one or more decimal numbers
 separated by dots.
 .AP int exact in
 Non-zero means that only the particular Tk version specified by
 \fIversion\fR is acceptable.
 Zero means that versions newer than \fIversion\fR are also
 acceptable as long as they have the same major version number
 as \fIversion\fR.
 .BE
 .SH INTRODUCTION
 .PP
 The Tcl stubs mechanism defines a way to dynamically bind
 extensions to a particular Tcl implementation at run time.
 the stubs mechanism requires no changes to applications
 incoporating Tcl/Tk interpreters.  Only developers creating
 C-based Tcl/Tk extensions need to take steps to use the
 stubs mechanism with their extensions.
 See the \fBTcl_InitStubs\fR page for more information.
 .PP
 Enabling the stubs mechanism for a Tcl/Tk extension requires the following
 steps:
 .IP 1) 5
 Call \fBTcl_InitStubs\fR in the extension before calling any other
 Tcl functions.
 .IP 2) 5
 Call \fBTk_InitStubs\fR if the extension before calling any other
 Tk functions.
 .IP 2) 5
 Define the USE_TCL_STUBS symbol.  Typically, you would include the
 -DUSE_TCL_STUBS flag when compiling the extension.
 .IP 3) 5
 Link the extension with the Tcl and Tk stubs libraries instead of
 the standard Tcl and Tk libraries.  On Unix platforms, the library
 names are \fIlibtclstub8.4.a\fR and \fIlibtkstub8.4.a\fR; on Windows
 platforms, the library names are \fItclstub84.lib\fR and \fItkstub84.lib\fR
 (adjust names with appropriate version number).
 .SH DESCRIPTION
 \fBTk_InitStubs\fR attempts to initialize the Tk stub table pointers
 and ensure that the correct version of Tk is loaded.  In addition
 to an interpreter handle, it accepts as arguments a version number
 and a Boolean flag indicating whether the extension requires
 an exact version match or not.  If \fIexact\fR is 0, then the
 extension is indicating that newer versions of Tk are acceptable
 as long as they have the same major version number as \fIversion\fR;
 non-zero means that only the specified \fIversion\fR is acceptable.
 \fBTcl_InitStubs\fR returns a string containing the actual version
 of Tk satisfying the request, or NULL if the Tk version is not
 acceptable, does not support the stubs mechansim, or any other
 error condition occurred.
 .SH "SEE ALSO"
 \fBTcl_InitStubs\fR
 .SH KEYWORDS
 stubs
	'\"
	'\" Copyright (c) 1999 Scriptics Corportation
	'\"
	'\" See the file "license.terms" for information on usage and redistribution
	'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
	'\"
	'\" RCS: @(#) $Id: TkInitStubs.3,v 1.2 2001/05/22 00:22:41 hobbs Exp $
	'\"
	'\" The definitions below are for supplemental macros used in Tcl/Tk
	'\" manual entries.
	'\"
	'\" .AP type name in/out ?indent?
	'\" Start paragraph describing an argument to a library procedure.
	'\" type is type of argument (int, etc.), in/out is either "in", "out",
	'\" or "in/out" to describe whether procedure reads or modifies arg,
	'\" and indent is equivalent to second arg of .IP (shouldn't ever be
	'\" needed; use .AS below instead)
	'\"
	'\" .AS ?type? ?name?
	'\" Give maximum sizes of arguments for setting tab stops. Type and
	'\" name are examples of largest possible arguments that will be passed
	'\" to .AP later. If args are omitted, default tab stops are used.
	'\"
	'\" .BS
	'\" Start box enclosure. From here until next .BE, everything will be
	'\" enclosed in one large box.
	'\"
	'\" .BE
	'\" End of box enclosure.
	'\"
	'\" .CS
	'\" Begin code excerpt.
	'\"
	'\" .CE
	'\" End code excerpt.
	'\"
	'\" .VS ?version? ?br?
	'\" Begin vertical sidebar, for use in marking newly-changed parts
	'\" of man pages. The first argument is ignored and used for recording
	'\" the version when the .VS was added, so that the sidebars can be
	'\" found and removed when they reach a certain age. If another argument
	'\" is present, then a line break is forced before starting the sidebar.
	'\"
	'\" .VE
	'\" End of vertical sidebar.
	'\"
	'\" .DS
	'\" Begin an indented unfilled display.
	'\"
	'\" .DE
	'\" End of indented unfilled display.
	'\"
	'\" .SO
	'\" Start of list of standard options for a Tk widget. The
	'\" options follow on successive lines, in four columns separated
	'\" by tabs.
	'\"
	'\" .SE
	'\" End of list of standard options for a Tk widget.
	'\"
	'\" .OP cmdName dbName dbClass
	'\" Start of description of a specific option. cmdName gives the
	'\" option's name as specified in the class command, dbName gives
	'\" the option's name in the option database, and dbClass gives
	'\" the option's class in the option database.
	'\"
	'\" .UL arg1 arg2
	'\" Print arg1 underlined, then print arg2 normally.
	'\"
	'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
	'\"
	'\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
	.if t .wh -1.3i ^B
	.nr ^l \n(.l
	.ad b
	'\" # Start an argument description
	.de AP
	.ie !"\\$4"" .TP \\$4
	.el \{\
	. ie !"\\$2"" .TP \\n()Cu
	. el .TP 15
	.\}
	.ta \\n()Au \\n()Bu
	.ie !"\\$3"" \{\
	\&\\$1 \\fI\\$2\\fP (\\$3)
	.\".b
	.\}
	.el \{\
	.br
	.ie !"\\$2"" \{\
	\&\\$1 \\fI\\$2\\fP
	.\}
	.el \{\
	\&\\fI\\$1\\fP
	.\}
	.\}
	..
	'\" # define tabbing values for .AP
	.de AS
	.nr )A 10n
	.if !"\\$1"" .nr )A \\w'\\$1'u+3n
	.nr )B \\n()Au+15n
	.\"
	.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
	.nr )C \\n()Bu+\\w'(in/out)'u+2n
	..
	.AS Tcl_Interp Tcl_CreateInterp in/out
	'\" # BS - start boxed text
	'\" # ^y = starting y location
	'\" # ^b = 1
	.de BS
	.br
	.mk ^y
	.nr ^b 1u
	.if n .nf
	.if n .ti 0
	.if n \l'\\n(.lu\(ul'
	.if n .fi
	..
	'\" # BE - end boxed text (draw box now)
	.de BE
	.nf
	.ti 0
	.mk ^t
	.ie n \l'\\n(^lu\(ul'
	.el \{\
	.\" Draw four-sided box normally, but don't draw top of
	.\" box if the box started on an earlier page.
	.ie !\\n(^b-1 \{\
	\h'-1.5n'\L'\|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'\|0u-1.5n\(ul'
	.\}
	.el \}\
	\h'-1.5n'\L'\|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'\|0u-1.5n\(ul'
	.\}
	.\}
	.fi
	.br
	.nr ^b 0
	..
	'\" # VS - start vertical sidebar
	'\" # ^Y = starting y location
	'\" # ^v = 1 (for troff; for nroff this doesn't matter)
	.de VS
	.if !"\\$2"" .br
	.mk ^Y
	.ie n 'mc \s12\(br\s0
	.el .nr ^v 1u
	..
	'\" # VE - end of vertical sidebar
	.de VE
	.ie n 'mc
	.el \{\
	.ev 2
	.nf
	.ti 0
	.mk ^t
	\h'\|\\n(^lu+3n'\L'\|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-\|\\n(^lu+3n'
	.sp -1
	.fi
	.ev
	.\}
	.nr ^v 0
	..
	'\" # Special macro to handle page bottom: finish off current
	'\" # box/sidebar if in box/sidebar mode, then invoked standard
	'\" # page bottom macro.
	.de ^B
	.ev 2
	'ti 0
	'nf
	.mk ^t
	.if \\n(^b \{\
	.\" Draw three-sided box if this is the box's first page,
	.\" draw two sides but no top otherwise.
	.ie !\\n(^b-1 \h'-1.5n'\L'\|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'\|0u'\c
	.el \h'-1.5n'\L'\|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'\|0u'\c
	.\}
	.if \\n(^v \{\
	.nr ^x \\n(^tu+1v-\\n(^Yu
	\kx\h'-\\nxu'\h'\|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'\|0u'\c
	.\}
	.bp
	'fi
	.ev
	.if \\n(^b \{\
	.mk ^y
	.nr ^b 2
	.\}
	.if \\n(^v \{\
	.mk ^Y
	.\}
	..
	'\" # DS - begin display
	.de DS
	.RS
	.nf
	.sp
	..
	'\" # DE - end display
	.de DE
	.fi
	.RE
	.sp
	..
	'\" # SO - start of list of standard options
	.de SO
	.SH "STANDARD OPTIONS"
	.LP
	.nf
	.ta 5.5c 11c
	.ft B
	..
	'\" # SE - end of list of standard options
	.de SE
	.fi
	.ft R
	.LP
	See the \\fBoptions\\fR manual entry for details on the standard options.
	..
	'\" # OP - start of full description for a single option
	.de OP
	.LP
	.nf
	.ta 4c
	Command-Line Name: \\fB\\$1\\fR
	Database Name: \\fB\\$2\\fR
	Database Class: \\fB\\$3\\fR
	.fi
	.IP
	..
	'\" # CS - begin code excerpt
	.de CS
	.RS
	.nf
	.ta .25i .5i .75i 1i
	..
	'\" # CE - end code excerpt
	.de CE
	.fi
	.RE
	..
	.de UL
	\\$1\l'\|0\(ul'\\$2
	..
	.TH Tk_InitStubs 3 8.4 Tk "Tk Library Procedures"
	.BS
	.SH NAME
	Tk_InitStubs \- initialize the Tk stubs mechanism
	.SH SYNOPSIS
	.nf
	\fB#include <tk.h>\fR
	.sp
	CONST char *
	\fBTk_InitStubs\fR(\fIinterp, version, exact\fR)
	.SH ARGUMENTS
	.AS Tcl_Interp *interp in
	.AP Tcl_Interp *interp in
	Tcl interpreter handle.
	.AP char *version in
	A version string consisting of one or more decimal numbers
	separated by dots.
	.AP int exact in
	Non-zero means that only the particular Tk version specified by
	\fIversion\fR is acceptable.
	Zero means that versions newer than \fIversion\fR are also
	acceptable as long as they have the same major version number
	as \fIversion\fR.
	.BE
	.SH INTRODUCTION
	.PP
	The Tcl stubs mechanism defines a way to dynamically bind
	extensions to a particular Tcl implementation at run time.
	the stubs mechanism requires no changes to applications
	incoporating Tcl/Tk interpreters. Only developers creating
	C-based Tcl/Tk extensions need to take steps to use the
	stubs mechanism with their extensions.
	See the \fBTcl_InitStubs\fR page for more information.
	.PP
	Enabling the stubs mechanism for a Tcl/Tk extension requires the following
	steps:
	.IP 1) 5
	Call \fBTcl_InitStubs\fR in the extension before calling any other
	Tcl functions.
	.IP 2) 5
	Call \fBTk_InitStubs\fR if the extension before calling any other
	Tk functions.
	.IP 2) 5
	Define the USE_TCL_STUBS symbol. Typically, you would include the
	-DUSE_TCL_STUBS flag when compiling the extension.
	.IP 3) 5
	Link the extension with the Tcl and Tk stubs libraries instead of
	the standard Tcl and Tk libraries. On Unix platforms, the library
	names are \fIlibtclstub8.4.a\fR and \fIlibtkstub8.4.a\fR; on Windows
	platforms, the library names are \fItclstub84.lib\fR and \fItkstub84.lib\fR
	(adjust names with appropriate version number).
	.SH DESCRIPTION
	\fBTk_InitStubs\fR attempts to initialize the Tk stub table pointers
	and ensure that the correct version of Tk is loaded. In addition
	to an interpreter handle, it accepts as arguments a version number
	and a Boolean flag indicating whether the extension requires
	an exact version match or not. If \fIexact\fR is 0, then the
	extension is indicating that newer versions of Tk are acceptable
	as long as they have the same major version number as \fIversion\fR;
	non-zero means that only the specified \fIversion\fR is acceptable.
	\fBTcl_InitStubs\fR returns a string containing the actual version
	of Tk satisfying the request, or NULL if the Tk version is not
	acceptable, does not support the stubs mechansim, or any other
	error condition occurred.
	.SH "SEE ALSO"
	\fBTcl_InitStubs\fR
	.SH KEYWORDS
	stubs