man/man3/Tk_GetJustify.3 - toolchains/skids - Git at Google

 '\"
 '\" Copyright (c) 1990-1994 The Regents of the University of California.
 '\" Copyright (c) 1994-1998 Sun Microsystems, Inc.
 '\"
 '\" See the file "license.terms" for information on usage and redistribution
 '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 '\"
 '\" RCS: @(#) $Id: GetJustify.3,v 1.4 2002/08/05 04:30:38 dgp Exp $
 '\"
 '\" The definitions below are for supplemental macros used in Tcl/Tk
 '\" manual entries.
 '\"
 '\" .AP type name in/out ?indent?
 '\"	Start paragraph describing an argument to a library procedure.
 '\"	type is type of argument (int, etc.), in/out is either "in", "out",
 '\"	or "in/out" to describe whether procedure reads or modifies arg,
 '\"	and indent is equivalent to second arg of .IP (shouldn't ever be
 '\"	needed;  use .AS below instead)
 '\"
 '\" .AS ?type? ?name?
 '\"	Give maximum sizes of arguments for setting tab stops.  Type and
 '\"	name are examples of largest possible arguments that will be passed
 '\"	to .AP later.  If args are omitted, default tab stops are used.
 '\"
 '\" .BS
 '\"	Start box enclosure.  From here until next .BE, everything will be
 '\"	enclosed in one large box.
 '\"
 '\" .BE
 '\"	End of box enclosure.
 '\"
 '\" .CS
 '\"	Begin code excerpt.
 '\"
 '\" .CE
 '\"	End code excerpt.
 '\"
 '\" .VS ?version? ?br?
 '\"	Begin vertical sidebar, for use in marking newly-changed parts
 '\"	of man pages.  The first argument is ignored and used for recording
 '\"	the version when the .VS was added, so that the sidebars can be
 '\"	found and removed when they reach a certain age.  If another argument
 '\"	is present, then a line break is forced before starting the sidebar.
 '\"
 '\" .VE
 '\"	End of vertical sidebar.
 '\"
 '\" .DS
 '\"	Begin an indented unfilled display.
 '\"
 '\" .DE
 '\"	End of indented unfilled display.
 '\"
 '\" .SO
 '\"	Start of list of standard options for a Tk widget.  The
 '\"	options follow on successive lines, in four columns separated
 '\"	by tabs.
 '\"
 '\" .SE
 '\"	End of list of standard options for a Tk widget.
 '\"
 '\" .OP cmdName dbName dbClass
 '\"	Start of description of a specific option.  cmdName gives the
 '\"	option's name as specified in the class command, dbName gives
 '\"	the option's name in the option database, and dbClass gives
 '\"	the option's class in the option database.
 '\"
 '\" .UL arg1 arg2
 '\"	Print arg1 underlined, then print arg2 normally.
 '\"
 '\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
 '\"
 '\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
 .if t .wh -1.3i ^B
 .nr ^l \n(.l
 .ad b
 '\"	# Start an argument description
 .de AP
 .ie !"\\$4"" .TP \\$4
 .el \{\
 .   ie !"\\$2"" .TP \\n()Cu
 .   el          .TP 15
 .\}
 .ta \\n()Au \\n()Bu
 .ie !"\\$3"" \{\
 \&\\$1	\\fI\\$2\\fP	(\\$3)
 .\".b
 .\}
 .el \{\
 .br
 .ie !"\\$2"" \{\
 \&\\$1	\\fI\\$2\\fP
 .\}
 .el \{\
 \&\\fI\\$1\\fP
 .\}
 .\}
 ..
 '\"	# define tabbing values for .AP
 .de AS
 .nr )A 10n
 .if !"\\$1"" .nr )A \\w'\\$1'u+3n
 .nr )B \\n()Au+15n
 .\"
 .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
 .nr )C \\n()Bu+\\w'(in/out)'u+2n
 ..
 .AS Tcl_Interp Tcl_CreateInterp in/out
 '\"	# BS - start boxed text
 '\"	# ^y = starting y location
 '\"	# ^b = 1
 .de BS
 .br
 .mk ^y
 .nr ^b 1u
 .if n .nf
 .if n .ti 0
 .if n \l'\\n(.lu\(ul'
 .if n .fi
 ..
 '\"	# BE - end boxed text (draw box now)
 .de BE
 .nf
 .ti 0
 .mk ^t
 .ie n \l'\\n(^lu\(ul'
 .el \{\
 .\"	Draw four-sided box normally, but don't draw top of
 .\"	box if the box started on an earlier page.
 .ie !\\n(^b-1 \{\
 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
 .\}
 .el \}\
 \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
 .\}
 .\}
 .fi
 .br
 .nr ^b 0
 ..
 '\"	# VS - start vertical sidebar
 '\"	# ^Y = starting y location
 '\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
 .de VS
 .if !"\\$2"" .br
 .mk ^Y
 .ie n 'mc \s12\(br\s0
 .el .nr ^v 1u
 ..
 '\"	# VE - end of vertical sidebar
 .de VE
 .ie n 'mc
 .el \{\
 .ev 2
 .nf
 .ti 0
 .mk ^t
 \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
 .sp -1
 .fi
 .ev
 .\}
 .nr ^v 0
 ..
 '\"	# Special macro to handle page bottom:  finish off current
 '\"	# box/sidebar if in box/sidebar mode, then invoked standard
 '\"	# page bottom macro.
 .de ^B
 .ev 2
 'ti 0
 'nf
 .mk ^t
 .if \\n(^b \{\
 .\"	Draw three-sided box if this is the box's first page,
 .\"	draw two sides but no top otherwise.
 .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
 .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
 .\}
 .if \\n(^v \{\
 .nr ^x \\n(^tu+1v-\\n(^Yu
 \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
 .\}
 .bp
 'fi
 .ev
 .if \\n(^b \{\
 .mk ^y
 .nr ^b 2
 .\}
 .if \\n(^v \{\
 .mk ^Y
 .\}
 ..
 '\"	# DS - begin display
 .de DS
 .RS
 .nf
 .sp
 ..
 '\"	# DE - end display
 .de DE
 .fi
 .RE
 .sp
 ..
 '\"	# SO - start of list of standard options
 .de SO
 .SH "STANDARD OPTIONS"
 .LP
 .nf
 .ta 5.5c 11c
 .ft B
 ..
 '\"	# SE - end of list of standard options
 .de SE
 .fi
 .ft R
 .LP
 See the \\fBoptions\\fR manual entry for details on the standard options.
 ..
 '\"	# OP - start of full description for a single option
 .de OP
 .LP
 .nf
 .ta 4c
 Command-Line Name:	\\fB\\$1\\fR
 Database Name:	\\fB\\$2\\fR
 Database Class:	\\fB\\$3\\fR
 .fi
 .IP
 ..
 '\"	# CS - begin code excerpt
 .de CS
 .RS
 .nf
 .ta .25i .5i .75i 1i
 ..
 '\"	# CE - end code excerpt
 .de CE
 .fi
 .RE
 ..
 .de UL
 \\$1\l'|0\(ul'\\$2
 ..
 .TH Tk_GetJustifyFromObj 3 8.1 Tk "Tk Library Procedures"
 .BS
 .SH NAME
 Tk_GetJustifyFromObj, Tk_GetJustify, Tk_NameOfJustify \- translate between strings and justification styles
 .SH SYNOPSIS
 .nf
 \fB#include <tk.h>\fR
 .sp
 .VS 8.1
 int
 \fBTk_GetJustifyFromObj(\fIinterp, objPtr, justifyPtr\fB)\fR
 .sp
 int
 \fBTk_GetJustify(\fIinterp, string, justifyPtr\fB)\fR
 .sp
 CONST char *
 \fBTk_NameOfJustify(\fIjustify\fB)\fR
 .SH ARGUMENTS
 .AS "Tk_Justify" *justifyPtr
 .AP Tcl_Interp *interp in
 Interpreter to use for error reporting, or NULL.
 .VS 8.1 br
 .AP Tcl_Obj *objPtr in/out
 String value contains name of justification style (\fBleft\fR, \fBright\fR, or
 \fBcenter\fR).  The
 internal rep will be modified to cache corresponding justify value.
 .AP "CONST char" *string in
 Same as \fIobjPtr\fR except description of justification style is passed as
 a string.
 .VE
 .AP int *justifyPtr out
 Pointer to location in which to store justify value corresponding to
 \fIobjPtr\fR or \fIstring\fR.
 .AP Tk_Justify justify in
 Justification style (one of the values listed below).
 .BE

 .SH DESCRIPTION
 .PP
 .VS 8.1
 \fBTk_GetJustifyFromObj\fR places in \fI*justifyPtr\fR the justify value
 corresponding to \fIobjPtr\fR's value.
 .VE
 This value will be one of the following:
 .TP
 \fBTK_JUSTIFY_LEFT\fR
 Means that the text on each line should start at the left edge of
 the line;  as a result, the right edges of lines may be ragged.
 .TP
 \fBTK_JUSTIFY_RIGHT\fR
 Means that the text on each line should end at the right edge of
 the line;  as a result, the left edges of lines may be ragged.
 .TP
 \fBTK_JUSTIFY_CENTER\fR
 Means that the text on each line should be centered;  as a result,
 both the left and right edges of lines may be ragged.
 .PP
 .VS 8.1
 Under normal circumstances the return value is \fBTCL_OK\fR and
 \fIinterp\fR is unused.
 If \fIobjPtr\fR doesn't contain a valid justification style
 or an abbreviation of one of these names, \fBTCL_ERROR\fR is returned,
 \fI*justifyPtr\fR is unmodified, and an error message is
 stored in \fIinterp\fR's result if \fIinterp\fR isn't NULL.
 \fBTk_GetJustifyFromObj\fR caches information about the return
 value in \fIobjPtr\fR, which speeds up future calls to
 \fBTk_GetJustifyFromObj\fR with the same \fIobjPtr\fR.
 .PP
 \fBTk_GetJustify\fR is identical to \fBTk_GetJustifyFromObj\fR except
 that the description of the justification is specified with a string instead
 of an object.  This prevents \fBTk_GetJustify\fR from caching the
 return value, so \fBTk_GetJustify\fR is less efficient than
 \fBTk_GetJustifyFromObj\fR.
 .VE
 .PP
 \fBTk_NameOfJustify\fR is the logical inverse of \fBTk_GetJustify\fR.
 Given a justify value it returns a statically-allocated string
 corresponding to \fIjustify\fR.
 If \fIjustify\fR isn't a legal justify value, then
 ``unknown justification style'' is returned.

 .SH KEYWORDS
 center, fill, justification, string
	'\"
	'\" Copyright (c) 1990-1994 The Regents of the University of California.
	'\" Copyright (c) 1994-1998 Sun Microsystems, Inc.
	'\"
	'\" See the file "license.terms" for information on usage and redistribution
	'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
	'\"
	'\" RCS: @(#) $Id: GetJustify.3,v 1.4 2002/08/05 04:30:38 dgp Exp $
	'\"
	'\" The definitions below are for supplemental macros used in Tcl/Tk
	'\" manual entries.
	'\"
	'\" .AP type name in/out ?indent?
	'\" Start paragraph describing an argument to a library procedure.
	'\" type is type of argument (int, etc.), in/out is either "in", "out",
	'\" or "in/out" to describe whether procedure reads or modifies arg,
	'\" and indent is equivalent to second arg of .IP (shouldn't ever be
	'\" needed; use .AS below instead)
	'\"
	'\" .AS ?type? ?name?
	'\" Give maximum sizes of arguments for setting tab stops. Type and
	'\" name are examples of largest possible arguments that will be passed
	'\" to .AP later. If args are omitted, default tab stops are used.
	'\"
	'\" .BS
	'\" Start box enclosure. From here until next .BE, everything will be
	'\" enclosed in one large box.
	'\"
	'\" .BE
	'\" End of box enclosure.
	'\"
	'\" .CS
	'\" Begin code excerpt.
	'\"
	'\" .CE
	'\" End code excerpt.
	'\"
	'\" .VS ?version? ?br?
	'\" Begin vertical sidebar, for use in marking newly-changed parts
	'\" of man pages. The first argument is ignored and used for recording
	'\" the version when the .VS was added, so that the sidebars can be
	'\" found and removed when they reach a certain age. If another argument
	'\" is present, then a line break is forced before starting the sidebar.
	'\"
	'\" .VE
	'\" End of vertical sidebar.
	'\"
	'\" .DS
	'\" Begin an indented unfilled display.
	'\"
	'\" .DE
	'\" End of indented unfilled display.
	'\"
	'\" .SO
	'\" Start of list of standard options for a Tk widget. The
	'\" options follow on successive lines, in four columns separated
	'\" by tabs.
	'\"
	'\" .SE
	'\" End of list of standard options for a Tk widget.
	'\"
	'\" .OP cmdName dbName dbClass
	'\" Start of description of a specific option. cmdName gives the
	'\" option's name as specified in the class command, dbName gives
	'\" the option's name in the option database, and dbClass gives
	'\" the option's class in the option database.
	'\"
	'\" .UL arg1 arg2
	'\" Print arg1 underlined, then print arg2 normally.
	'\"
	'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
	'\"
	'\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
	.if t .wh -1.3i ^B
	.nr ^l \n(.l
	.ad b
	'\" # Start an argument description
	.de AP
	.ie !"\\$4"" .TP \\$4
	.el \{\
	. ie !"\\$2"" .TP \\n()Cu
	. el .TP 15
	.\}
	.ta \\n()Au \\n()Bu
	.ie !"\\$3"" \{\
	\&\\$1 \\fI\\$2\\fP (\\$3)
	.\".b
	.\}
	.el \{\
	.br
	.ie !"\\$2"" \{\
	\&\\$1 \\fI\\$2\\fP
	.\}
	.el \{\
	\&\\fI\\$1\\fP
	.\}
	.\}
	..
	'\" # define tabbing values for .AP
	.de AS
	.nr )A 10n
	.if !"\\$1"" .nr )A \\w'\\$1'u+3n
	.nr )B \\n()Au+15n
	.\"
	.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
	.nr )C \\n()Bu+\\w'(in/out)'u+2n
	..
	.AS Tcl_Interp Tcl_CreateInterp in/out
	'\" # BS - start boxed text
	'\" # ^y = starting y location
	'\" # ^b = 1
	.de BS
	.br
	.mk ^y
	.nr ^b 1u
	.if n .nf
	.if n .ti 0
	.if n \l'\\n(.lu\(ul'
	.if n .fi
	..
	'\" # BE - end boxed text (draw box now)
	.de BE
	.nf
	.ti 0
	.mk ^t
	.ie n \l'\\n(^lu\(ul'
	.el \{\
	.\" Draw four-sided box normally, but don't draw top of
	.\" box if the box started on an earlier page.
	.ie !\\n(^b-1 \{\
	\h'-1.5n'\L'\|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'\|0u-1.5n\(ul'
	.\}
	.el \}\
	\h'-1.5n'\L'\|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'\|0u-1.5n\(ul'
	.\}
	.\}
	.fi
	.br
	.nr ^b 0
	..
	'\" # VS - start vertical sidebar
	'\" # ^Y = starting y location
	'\" # ^v = 1 (for troff; for nroff this doesn't matter)
	.de VS
	.if !"\\$2"" .br
	.mk ^Y
	.ie n 'mc \s12\(br\s0
	.el .nr ^v 1u
	..
	'\" # VE - end of vertical sidebar
	.de VE
	.ie n 'mc
	.el \{\
	.ev 2
	.nf
	.ti 0
	.mk ^t
	\h'\|\\n(^lu+3n'\L'\|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-\|\\n(^lu+3n'
	.sp -1
	.fi
	.ev
	.\}
	.nr ^v 0
	..
	'\" # Special macro to handle page bottom: finish off current
	'\" # box/sidebar if in box/sidebar mode, then invoked standard
	'\" # page bottom macro.
	.de ^B
	.ev 2
	'ti 0
	'nf
	.mk ^t
	.if \\n(^b \{\
	.\" Draw three-sided box if this is the box's first page,
	.\" draw two sides but no top otherwise.
	.ie !\\n(^b-1 \h'-1.5n'\L'\|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'\|0u'\c
	.el \h'-1.5n'\L'\|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'\|0u'\c
	.\}
	.if \\n(^v \{\
	.nr ^x \\n(^tu+1v-\\n(^Yu
	\kx\h'-\\nxu'\h'\|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'\|0u'\c
	.\}
	.bp
	'fi
	.ev
	.if \\n(^b \{\
	.mk ^y
	.nr ^b 2
	.\}
	.if \\n(^v \{\
	.mk ^Y
	.\}
	..
	'\" # DS - begin display
	.de DS
	.RS
	.nf
	.sp
	..
	'\" # DE - end display
	.de DE
	.fi
	.RE
	.sp
	..
	'\" # SO - start of list of standard options
	.de SO
	.SH "STANDARD OPTIONS"
	.LP
	.nf
	.ta 5.5c 11c
	.ft B
	..
	'\" # SE - end of list of standard options
	.de SE
	.fi
	.ft R
	.LP
	See the \\fBoptions\\fR manual entry for details on the standard options.
	..
	'\" # OP - start of full description for a single option
	.de OP
	.LP
	.nf
	.ta 4c
	Command-Line Name: \\fB\\$1\\fR
	Database Name: \\fB\\$2\\fR
	Database Class: \\fB\\$3\\fR
	.fi
	.IP
	..
	'\" # CS - begin code excerpt
	.de CS
	.RS
	.nf
	.ta .25i .5i .75i 1i
	..
	'\" # CE - end code excerpt
	.de CE
	.fi
	.RE
	..
	.de UL
	\\$1\l'\|0\(ul'\\$2
	..
	.TH Tk_GetJustifyFromObj 3 8.1 Tk "Tk Library Procedures"
	.BS
	.SH NAME
	Tk_GetJustifyFromObj, Tk_GetJustify, Tk_NameOfJustify \- translate between strings and justification styles
	.SH SYNOPSIS
	.nf
	\fB#include <tk.h>\fR
	.sp
	.VS 8.1
	int
	\fBTk_GetJustifyFromObj(\fIinterp, objPtr, justifyPtr\fB)\fR
	.sp
	int
	\fBTk_GetJustify(\fIinterp, string, justifyPtr\fB)\fR
	.sp
	CONST char *
	\fBTk_NameOfJustify(\fIjustify\fB)\fR
	.SH ARGUMENTS
	.AS "Tk_Justify" *justifyPtr
	.AP Tcl_Interp *interp in
	Interpreter to use for error reporting, or NULL.
	.VS 8.1 br
	.AP Tcl_Obj *objPtr in/out
	String value contains name of justification style (\fBleft\fR, \fBright\fR, or
	\fBcenter\fR). The
	internal rep will be modified to cache corresponding justify value.
	.AP "CONST char" *string in
	Same as \fIobjPtr\fR except description of justification style is passed as
	a string.
	.VE
	.AP int *justifyPtr out
	Pointer to location in which to store justify value corresponding to
	\fIobjPtr\fR or \fIstring\fR.
	.AP Tk_Justify justify in
	Justification style (one of the values listed below).
	.BE

	.SH DESCRIPTION
	.PP
	.VS 8.1
	\fBTk_GetJustifyFromObj\fR places in \fI*justifyPtr\fR the justify value
	corresponding to \fIobjPtr\fR's value.
	.VE
	This value will be one of the following:
	.TP
	\fBTK_JUSTIFY_LEFT\fR
	Means that the text on each line should start at the left edge of
	the line; as a result, the right edges of lines may be ragged.
	.TP
	\fBTK_JUSTIFY_RIGHT\fR
	Means that the text on each line should end at the right edge of
	the line; as a result, the left edges of lines may be ragged.
	.TP
	\fBTK_JUSTIFY_CENTER\fR
	Means that the text on each line should be centered; as a result,
	both the left and right edges of lines may be ragged.
	.PP
	.VS 8.1
	Under normal circumstances the return value is \fBTCL_OK\fR and
	\fIinterp\fR is unused.
	If \fIobjPtr\fR doesn't contain a valid justification style
	or an abbreviation of one of these names, \fBTCL_ERROR\fR is returned,
	\fI*justifyPtr\fR is unmodified, and an error message is
	stored in \fIinterp\fR's result if \fIinterp\fR isn't NULL.
	\fBTk_GetJustifyFromObj\fR caches information about the return
	value in \fIobjPtr\fR, which speeds up future calls to
	\fBTk_GetJustifyFromObj\fR with the same \fIobjPtr\fR.
	.PP
	\fBTk_GetJustify\fR is identical to \fBTk_GetJustifyFromObj\fR except
	that the description of the justification is specified with a string instead
	of an object. This prevents \fBTk_GetJustify\fR from caching the
	return value, so \fBTk_GetJustify\fR is less efficient than
	\fBTk_GetJustifyFromObj\fR.
	.VE
	.PP
	\fBTk_NameOfJustify\fR is the logical inverse of \fBTk_GetJustify\fR.
	Given a justify value it returns a statically-allocated string
	corresponding to \fIjustify\fR.
	If \fIjustify\fR isn't a legal justify value, then
	``unknown justification style'' is returned.

	.SH KEYWORDS
	center, fill, justification, string