man/man3/CrtPhImgFmt.3

'\"
'\" Copyright (c) 1994 The Australian National University
'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" Author: Paul Mackerras (paulus@cs.anu.edu.au),
'\"	    Department of Computer Science,
'\"	    Australian National University.
'\"
'\" RCS: @(#) $Id: CrtPhImgFmt.3,v 1.5 2001/08/23 19:11:22 hobbs Exp $
'\"
'\" The definitions below are for supplemental macros used in Tcl/Tk
'\" manual entries.
'\"
'\" .AP type name in/out ?indent?
'\"	Start paragraph describing an argument to a library procedure.
'\"	type is type of argument (int, etc.), in/out is either "in", "out",
'\"	or "in/out" to describe whether procedure reads or modifies arg,
'\"	and indent is equivalent to second arg of .IP (shouldn't ever be
'\"	needed;  use .AS below instead)
'\"
'\" .AS ?type? ?name?
'\"	Give maximum sizes of arguments for setting tab stops.  Type and
'\"	name are examples of largest possible arguments that will be passed
'\"	to .AP later.  If args are omitted, default tab stops are used.
'\"
'\" .BS
'\"	Start box enclosure.  From here until next .BE, everything will be
'\"	enclosed in one large box.
'\"
'\" .BE
'\"	End of box enclosure.
'\"
'\" .CS
'\"	Begin code excerpt.
'\"
'\" .CE
'\"	End code excerpt.
'\"
'\" .VS ?version? ?br?
'\"	Begin vertical sidebar, for use in marking newly-changed parts
'\"	of man pages.  The first argument is ignored and used for recording
'\"	the version when the .VS was added, so that the sidebars can be
'\"	found and removed when they reach a certain age.  If another argument
'\"	is present, then a line break is forced before starting the sidebar.
'\"
'\" .VE
'\"	End of vertical sidebar.
'\"
'\" .DS
'\"	Begin an indented unfilled display.
'\"
'\" .DE
'\"	End of indented unfilled display.
'\"
'\" .SO
'\"	Start of list of standard options for a Tk widget.  The
'\"	options follow on successive lines, in four columns separated
'\"	by tabs.
'\"
'\" .SE
'\"	End of list of standard options for a Tk widget.
'\"
'\" .OP cmdName dbName dbClass
'\"	Start of description of a specific option.  cmdName gives the
'\"	option's name as specified in the class command, dbName gives
'\"	the option's name in the option database, and dbClass gives
'\"	the option's class in the option database.
'\"
'\" .UL arg1 arg2
'\"	Print arg1 underlined, then print arg2 normally.
'\"
'\" RCS: @(#) $Id: man.macros,v 1.4 2000/08/25 06:18:32 ericm Exp $
'\"
'\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
'\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1	\\fI\\$2\\fP	(\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
'\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
'\"	# BS - start boxed text
'\"	# ^y = starting y location
'\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
'\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
'\"	# VS - start vertical sidebar
'\"	# ^Y = starting y location
'\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
'\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
'\"	# Special macro to handle page bottom:  finish off current
'\"	# box/sidebar if in box/sidebar mode, then invoked standard
'\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
'\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
'\"	# DE - end display
.de DE
.fi
.RE
.sp
..
'\"	# SO - start of list of standard options
.de SO
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
'\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\fBoptions\\fR manual entry for details on the standard options.
..
'\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
'\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
'\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.de UL
\\$1\l'|0\(ul'\\$2
..
.TH Tk_CreatePhotoImageFormat 3 8.3 Tk "Tk Library Procedures"
.BS
.SH NAME
Tk_CreatePhotoImageFormat \- define new file format for photo images
.SH SYNOPSIS
.nf
\fB#include <tk.h>\fR
.sp
\fBTk_CreatePhotoImageFormat\fR(\fIformatPtr\fR)
.SH ARGUMENTS
.AS Tk_PhotoImageFormat *formatPtr
.AP Tk_PhotoImageFormat *formatPtr in
Structure that defines the new file format.
.BE

.SH DESCRIPTION
.PP
\fBTk_CreatePhotoImageFormat\fR is invoked to define a new file format
for image data for use with photo images.  The code that implements an
image file format is called an image file format handler, or
handler for short.  The photo image code
maintains a list of handlers that can be used to read and
write data to or from a file.  Some handlers may also
support reading image data from a string or converting image data to a
string format.
The user can specify which handler to use with the \fB\-format\fR
image configuration option or the \fB\-format\fR option to the
\fBread\fR and \fBwrite\fR photo image subcommands.
.PP
An image file format handler consists of a collection of procedures
plus a Tk_PhotoImageFormat structure, which contains the name of the
image file format and pointers to six procedures provided by the
handler to deal with files and strings in this format.  The
Tk_PhotoImageFormat structure contains the following fields:
.CS
typedef struct Tk_PhotoImageFormat {
	char *\fIname\fR;
	Tk_ImageFileMatchProc *\fIfileMatchProc\fR;
	Tk_ImageStringMatchProc *\fIstringMatchProc\fR;
	Tk_ImageFileReadProc *\fIfileReadProc\fR;
	Tk_ImageStringReadProc *\fIstringReadProc\fR;
	Tk_ImageFileWriteProc *\fIfileWriteProc\fR;
	Tk_ImageStringWriteProc *\fIstringWriteProc\fR;
} Tk_PhotoImageFormat;
.CE
.PP
The handler need not provide implementations of all six procedures.
For example, the procedures that handle string data would not be
provided for a format in which the image data are stored in binary,
and could therefore contain null characters.  If any procedure is not
implemented, the corresponding pointer in the Tk_PhotoImageFormat
structure should be set to NULL.  The handler must provide the
\fIfileMatchProc\fR procedure if it provides the \fIfileReadProc\fR
procedure, and the \fIstringMatchProc\fR procedure if it provides the
\fIstringReadProc\fR procedure.

.SH PORTABILITY
.PP
In Tk 8.2 and earlier, a different interface was used. Tk 8.3 will
still support the old format handlers if the format name is in upper
case. If you still want to compile old format handlers with Tk8.3,
use the flag -DUSE_OLD_IMAGE. This will restore all function prototypes
to match the pre-8.3 situation.

.SH NAME
.PP
\fIformatPtr->name\fR provides a name for the image type.
Once \fBTk_CreatePhotoImageFormat\fR returns, this name may be used
in the \fB\-format\fR photo image configuration and subcommand option.
The manual page for the photo image (photo(n)) describes how image
file formats are chosen based on their names and the value given to
the \fB\-format\fR option. For new format handlers, the name should
be in lower case. Pre-8.3 format handlers are assumed to be in
upper case.

.SH FILEMATCHPROC
\fIformatPtr->fileMatchProc\fR provides the address of a procedure for
Tk to call when it is searching for an image file format handler
suitable for reading data in a given file.
\fIformatPtr->fileMatchProc\fR must match the following prototype:
.CS
typedef int Tk_ImageFileMatchProc(
	Tcl_Channel \fIchan\fR,
	CONST char *\fIfileName\fR,
	Tcl_Obj *\fIformat\fR,
	int *\fIwidthPtr\fR,
	int *\fIheightPtr\fR,
	Tcl_Interp *\fIinterp\fR);
.CE
The \fIfileName\fR argument is the name of the file containing the
image data, which is open for reading as \fIchan\fR.  The
\fIformat\fR argument contains the value given for the
\fB\-format\fR option, or NULL if the option was not specified.
If the data in the file appears to be in the format supported by this
handler, the \fIformatPtr->fileMatchProc\fR procedure should store the
width and height of the image in *\fIwidthPtr\fR and *\fIheightPtr\fR
respectively, and return 1.  Otherwise it should return 0.

.SH STRINGMATCHPROC
\fIformatPtr->stringMatchProc\fR provides the address of a procedure for
Tk to call when it is searching for an image file format handler for
suitable for reading data from a given string.
\fIformatPtr->stringMatchProc\fR must match the following prototype:
.CS
typedef int Tk_ImageStringMatchProc(
	Tcl_Obj *\fIdata\fR,
	Tcl_Obj *\fIformat\fR,
	int *\fIwidthPtr\fR,
	int *\fIheightPtr\fR,
	Tcl_Interp *\fIinterp\fR);
.CE
The \fIdata\fR argument points to the object containing the image
data.  The \fIformat\fR argument contains the value given for
the \fB\-format\fR option, or NULL if the option was not specified.
If the data in the string appears to be in the format supported by
this handler, the \fIformatPtr->stringMatchProc\fR procedure should
store the width and height of the image in *\fIwidthPtr\fR and
*\fIheightPtr\fR respectively, and return 1.  Otherwise it should
return 0.

.SH FILEREADPROC
\fIformatPtr->fileReadProc\fR provides the address of a procedure for
Tk to call to read data from an image file into a photo image.
\fIformatPtr->fileReadProc\fR must match the following prototype:
.CS
typedef int Tk_ImageFileReadProc(
	Tcl_Interp *\fIinterp\fR,
	Tcl_Channel \fIchan\fR,
	CONST char *\fIfileName\fR,
	Tcl_Obj *\fIformat\fR,
	PhotoHandle \fIimageHandle\fR,
	int \fIdestX\fR, int \fIdestY\fR,
	int \fIwidth\fR, int \fIheight\fR,
	int \fIsrcX\fR, int \fIsrcY\fR);
.CE
The \fIinterp\fR argument is the interpreter in which the command was
invoked to read the image; it should be used for reporting errors.
The image data is in the file named \fIfileName\fR, which is open for
reading as \fIchan\fR.  The \fIformat\fR argument contains the
value given for the \fB\-format\fR option, or NULL if the option was
not specified.  The image data in the file, or a subimage of it, is to
be read into the photo image identified by the handle
\fIimageHandle\fR.  The subimage of the data in the file is of
dimensions \fIwidth\fR x \fIheight\fR and has its top-left corner at
coordinates (\fIsrcX\fR,\fIsrcY\fR).  It is to be stored in the photo
image with its top-left corner at coordinates
(\fIdestX\fR,\fIdestY\fR) using the \fBTk_PhotoPutBlock\fR procedure.
The return value is a standard Tcl return value.

.SH STRINGREADPROC
\fIformatPtr->stringReadProc\fR provides the address of a procedure for
Tk to call to read data from a string into a photo image.
\fIformatPtr->stringReadProc\fR must match the following prototype:
.CS
typedef int Tk_ImageStringReadProc(
	Tcl_Interp *\fIinterp\fR,
	Tcl_Obj *\fIdata\fR,
	Tcl_Obj *\fIformat\fR,
	PhotoHandle \fIimageHandle\fR,
	int \fIdestX\fR, int \fIdestY\fR,
	int \fIwidth\fR, int \fIheight\fR,
	int \fIsrcX\fR, int \fIsrcY\fR);
.CE
The \fIinterp\fR argument is the interpreter in which the command was
invoked to read the image; it should be used for reporting errors.
The \fIdata\fR argument points to the image data in object form.
The \fIformat\fR argument contains the
value given for the \fB\-format\fR option, or NULL if the option was
not specified.  The image data in the string, or a subimage of it, is to
be read into the photo image identified by the handle
\fIimageHandle\fR.  The subimage of the data in the string is of
dimensions \fIwidth\fR x \fIheight\fR and has its top-left corner at
coordinates (\fIsrcX\fR,\fIsrcY\fR).  It is to be stored in the photo
image with its top-left corner at coordinates
(\fIdestX\fR,\fIdestY\fR) using the \fBTk_PhotoPutBlock\fR procedure.
The return value is a standard Tcl return value.

.SH FILEWRITEPROC
\fIformatPtr->fileWriteProc\fR provides the address of a procedure for
Tk to call to write data from a photo image to a file.
\fIformatPtr->fileWriteProc\fR must match the following prototype:
.CS
typedef int Tk_ImageFileWriteProc(
	Tcl_Interp *\fIinterp\fR,
	CONST char *\fIfileName\fR,
	Tcl_Obj *\fIformat\fR,
	Tk_PhotoImageBlock *\fIblockPtr\fR);
.CE
The \fIinterp\fR argument is the interpreter in which the command was
invoked to write the image; it should be used for reporting errors.
The image data to be written are in memory and are described by the
Tk_PhotoImageBlock structure pointed to by \fIblockPtr\fR; see the
manual page FindPhoto(3) for details.  The \fIfileName\fR argument
points to the string giving the name of the file in which to write the
image data.  The \fIformat\fR argument contains the
value given for the \fB\-format\fR option, or NULL if the option was
not specified.  The format string can contain extra characters
after the name of the format.  If appropriate, the
\fIformatPtr->fileWriteProc\fR procedure may interpret these
characters to specify further details about the image file.
The return value is a standard Tcl return value.

.SH STRINGWRITEPROC
\fIformatPtr->stringWriteProc\fR provides the address of a procedure for
Tk to call to translate image data from a photo image into a string.
\fIformatPtr->stringWriteProc\fR must match the following prototype:
.CS
typedef int Tk_ImageStringWriteProc(
	Tcl_Interp *\fIinterp\fR,
	Tcl_Obj *\fIformat\fR,
	Tk_PhotoImageBlock *\fIblockPtr\fR);
.CE
The \fIinterp\fR argument is the interpreter in which the command was
invoked to convert the image; it should be used for reporting errors.
The image data to be converted are in memory and are described by the
Tk_PhotoImageBlock structure pointed to by \fIblockPtr\fR; see the
manual page FindPhoto(3) for details.  The data for the string
should be put in the interpreter \fIinterp\fR result.
The \fIformat\fR argument contains the
value given for the \fB\-format\fR option, or NULL if the option was
not specified.  The format string can contain extra characters
after the name of the format.  If appropriate, the
\fIformatPtr->stringWriteProc\fR procedure may interpret these
characters to specify further details about the image file.
The return value is a standard Tcl return value.

.SH "SEE ALSO"
Tk_FindPhoto, Tk_PhotoPutBlock

.SH KEYWORDS
photo image, image file