| /* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM |
| * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993 |
| * derived from Data Sheet, Copyright Motorola 1984 (!). |
| * It was written to be part of the Linux operating system. |
| */ |
| /* permission is hereby granted to copy, modify and redistribute this code |
| * in terms of the GNU Library General Public License, Version 2 or later, |
| * at your option. |
| */ |
| |
| #ifndef _MC146818RTC_H |
| #define _MC146818RTC_H |
| |
| #include <asm/io.h> |
| #include <linux/rtc.h> /* get the user-level API */ |
| #include <asm/mc146818rtc.h> /* register access macros */ |
| |
| #ifdef __KERNEL__ |
| #include <linux/spinlock.h> /* spinlock_t */ |
| extern spinlock_t rtc_lock; /* serialize CMOS RAM access */ |
| |
| /* Some RTCs extend the mc146818 register set to support alarms of more |
| * than 24 hours in the future; or dates that include a century code. |
| * This platform_data structure can pass this information to the driver. |
| * |
| * Also, some platforms need suspend()/resume() hooks to kick in special |
| * handling of wake alarms, e.g. activating ACPI BIOS hooks or setting up |
| * a separate wakeup alarm used by some almost-clone chips. |
| */ |
| struct cmos_rtc_board_info { |
| void (*wake_on)(struct device *dev); |
| void (*wake_off)(struct device *dev); |
| |
| u8 rtc_day_alarm; /* zero, or register index */ |
| u8 rtc_mon_alarm; /* zero, or register index */ |
| u8 rtc_century; /* zero, or register index */ |
| }; |
| #endif |
| |
| /********************************************************************** |
| * register summary |
| **********************************************************************/ |
| #define RTC_SECONDS 0 |
| #define RTC_SECONDS_ALARM 1 |
| #define RTC_MINUTES 2 |
| #define RTC_MINUTES_ALARM 3 |
| #define RTC_HOURS 4 |
| #define RTC_HOURS_ALARM 5 |
| /* RTC_*_alarm is always true if 2 MSBs are set */ |
| # define RTC_ALARM_DONT_CARE 0xC0 |
| |
| #define RTC_DAY_OF_WEEK 6 |
| #define RTC_DAY_OF_MONTH 7 |
| #define RTC_MONTH 8 |
| #define RTC_YEAR 9 |
| |
| /* control registers - Moto names |
| */ |
| #define RTC_REG_A 10 |
| #define RTC_REG_B 11 |
| #define RTC_REG_C 12 |
| #define RTC_REG_D 13 |
| |
| /********************************************************************** |
| * register details |
| **********************************************************************/ |
| #define RTC_FREQ_SELECT RTC_REG_A |
| |
| /* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus, |
| * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete, |
| * totalling to a max high interval of 2.228 ms. |
| */ |
| # define RTC_UIP 0x80 |
| # define RTC_DIV_CTL 0x70 |
| /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */ |
| # define RTC_REF_CLCK_4MHZ 0x00 |
| # define RTC_REF_CLCK_1MHZ 0x10 |
| # define RTC_REF_CLCK_32KHZ 0x20 |
| /* 2 values for divider stage reset, others for "testing purposes only" */ |
| # define RTC_DIV_RESET1 0x60 |
| # define RTC_DIV_RESET2 0x70 |
| /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */ |
| # define RTC_RATE_SELECT 0x0F |
| |
| /**********************************************************************/ |
| #define RTC_CONTROL RTC_REG_B |
| # define RTC_SET 0x80 /* disable updates for clock setting */ |
| # define RTC_PIE 0x40 /* periodic interrupt enable */ |
| # define RTC_AIE 0x20 /* alarm interrupt enable */ |
| # define RTC_UIE 0x10 /* update-finished interrupt enable */ |
| # define RTC_SQWE 0x08 /* enable square-wave output */ |
| # define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ |
| # define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ |
| # define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ |
| |
| /**********************************************************************/ |
| #define RTC_INTR_FLAGS RTC_REG_C |
| /* caution - cleared by read */ |
| # define RTC_IRQF 0x80 /* any of the following 3 is active */ |
| # define RTC_PF 0x40 |
| # define RTC_AF 0x20 |
| # define RTC_UF 0x10 |
| |
| /**********************************************************************/ |
| #define RTC_VALID RTC_REG_D |
| # define RTC_VRT 0x80 /* valid RAM and time */ |
| /**********************************************************************/ |
| |
| #ifndef ARCH_RTC_LOCATION /* Override by <asm/mc146818rtc.h>? */ |
| |
| #define RTC_IO_EXTENT 0x8 |
| #define RTC_IO_EXTENT_USED 0x2 |
| #define RTC_IOMAPPED 1 /* Default to I/O mapping. */ |
| |
| #else |
| #define RTC_IO_EXTENT_USED RTC_IO_EXTENT |
| #endif /* ARCH_RTC_LOCATION */ |
| |
| #endif /* _MC146818RTC_H */ |
