include/linux/hwspinlock.h - kernel/windcharger - Git at Google

 /*
  * Hardware spinlock public header
  *
  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
  *
  * Contact: Ohad Ben-Cohen <ohad@wizery.com>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #ifndef __LINUX_HWSPINLOCK_H
 #define __LINUX_HWSPINLOCK_H

 #include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/device.h>

 /* hwspinlock mode argument */
 #define HWLOCK_IRQSTATE	0x01	/* Disable interrupts, save state */
 #define HWLOCK_IRQ	0x02	/* Disable interrupts, don't save state */

 struct hwspinlock;
 struct hwspinlock_device;
 struct hwspinlock_ops;

 /**
  * struct hwspinlock_pdata - platform data for hwspinlock drivers
  * @base_id: base id for this hwspinlock device
  *
  * hwspinlock devices provide system-wide hardware locks that are used
  * by remote processors that have no other way to achieve synchronization.
  *
  * To achieve that, each physical lock must have a system-wide id number
  * that is agreed upon, otherwise remote processors can't possibly assume
  * they're using the same hardware lock.
  *
  * Usually boards have a single hwspinlock device, which provides several
  * hwspinlocks, and in this case, they can be trivially numbered 0 to
  * (num-of-locks - 1).
  *
  * In case boards have several hwspinlocks devices, a different base id
  * should be used for each hwspinlock device (they can't all use 0 as
  * a starting id!).
  *
  * This platform data structure should be used to provide the base id
  * for each device (which is trivially 0 when only a single hwspinlock
  * device exists). It can be shared between different platforms, hence
  * its location.
  */
 struct hwspinlock_pdata {
 	int base_id;
 };

 #if defined(CONFIG_HWSPINLOCK) || defined(CONFIG_HWSPINLOCK_MODULE)

 int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
 		const struct hwspinlock_ops *ops, int base_id, int num_locks);
 int hwspin_lock_unregister(struct hwspinlock_device *bank);
 struct hwspinlock *hwspin_lock_request(void);
 struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
 int hwspin_lock_free(struct hwspinlock *hwlock);
 int hwspin_lock_get_id(struct hwspinlock *hwlock);
 int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
 							unsigned long *);
 int __hwspin_trylock(struct hwspinlock *, int, unsigned long *);
 void __hwspin_unlock(struct hwspinlock *, int, unsigned long *);

 #else /* !CONFIG_HWSPINLOCK */

 /*
  * We don't want these functions to fail if CONFIG_HWSPINLOCK is not
  * enabled. We prefer to silently succeed in this case, and let the
  * code path get compiled away. This way, if CONFIG_HWSPINLOCK is not
  * required on a given setup, users will still work.
  *
  * The only exception is hwspin_lock_register/hwspin_lock_unregister, with which
  * we _do_ want users to fail (no point in registering hwspinlock instances if
  * the framework is not available).
  *
  * Note: ERR_PTR(-ENODEV) will still be considered a success for NULL-checking
  * users. Others, which care, can still check this with IS_ERR.
  */
 static inline struct hwspinlock *hwspin_lock_request(void)
 {
 	return ERR_PTR(-ENODEV);
 }

 static inline struct hwspinlock *hwspin_lock_request_specific(unsigned int id)
 {
 	return ERR_PTR(-ENODEV);
 }

 static inline int hwspin_lock_free(struct hwspinlock *hwlock)
 {
 	return 0;
 }

 static inline
 int __hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to,
 					int mode, unsigned long *flags)
 {
 	return 0;
 }

 static inline
 int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
 {
 	return 0;
 }

 static inline
 void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
 {
 }

 static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
 {
 	return 0;
 }

 #endif /* !CONFIG_HWSPINLOCK */

 /**
  * hwspin_trylock_irqsave() - try to lock an hwspinlock, disable interrupts
  * @hwlock: an hwspinlock which we want to trylock
  * @flags: a pointer to where the caller's interrupt state will be saved at
  *
  * This function attempts to lock the underlying hwspinlock, and will
  * immediately fail if the hwspinlock is already locked.
  *
  * Upon a successful return from this function, preemption and local
  * interrupts are disabled (previous interrupts state is saved at @flags),
  * so the caller must not sleep, and is advised to release the hwspinlock
  * as soon as possible.
  *
  * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
  * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
  */
 static inline
 int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags)
 {
 	return __hwspin_trylock(hwlock, HWLOCK_IRQSTATE, flags);
 }

 /**
  * hwspin_trylock_irq() - try to lock an hwspinlock, disable interrupts
  * @hwlock: an hwspinlock which we want to trylock
  *
  * This function attempts to lock the underlying hwspinlock, and will
  * immediately fail if the hwspinlock is already locked.
  *
  * Upon a successful return from this function, preemption and local
  * interrupts are disabled, so the caller must not sleep, and is advised
  * to release the hwspinlock as soon as possible.
  *
  * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
  * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
  */
 static inline int hwspin_trylock_irq(struct hwspinlock *hwlock)
 {
 	return __hwspin_trylock(hwlock, HWLOCK_IRQ, NULL);
 }

 /**
  * hwspin_trylock() - attempt to lock a specific hwspinlock
  * @hwlock: an hwspinlock which we want to trylock
  *
  * This function attempts to lock an hwspinlock, and will immediately fail
  * if the hwspinlock is already taken.
  *
  * Upon a successful return from this function, preemption is disabled,
  * so the caller must not sleep, and is advised to release the hwspinlock
  * as soon as possible. This is required in order to minimize remote cores
  * polling on the hardware interconnect.
  *
  * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
  * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
  */
 static inline int hwspin_trylock(struct hwspinlock *hwlock)
 {
 	return __hwspin_trylock(hwlock, 0, NULL);
 }

 /**
  * hwspin_lock_timeout_irqsave() - lock hwspinlock, with timeout, disable irqs
  * @hwlock: the hwspinlock to be locked
  * @to: timeout value in msecs
  * @flags: a pointer to where the caller's interrupt state will be saved at
  *
  * This function locks the underlying @hwlock. If the @hwlock
  * is already taken, the function will busy loop waiting for it to
  * be released, but give up when @timeout msecs have elapsed.
  *
  * Upon a successful return from this function, preemption and local interrupts
  * are disabled (plus previous interrupt state is saved), so the caller must
  * not sleep, and is advised to release the hwspinlock as soon as possible.
  *
  * Returns 0 when the @hwlock was successfully taken, and an appropriate
  * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
  * busy after @timeout msecs). The function will never sleep.
  */
 static inline int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock,
 				unsigned int to, unsigned long *flags)
 {
 	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQSTATE, flags);
 }

 /**
  * hwspin_lock_timeout_irq() - lock hwspinlock, with timeout, disable irqs
  * @hwlock: the hwspinlock to be locked
  * @to: timeout value in msecs
  *
  * This function locks the underlying @hwlock. If the @hwlock
  * is already taken, the function will busy loop waiting for it to
  * be released, but give up when @timeout msecs have elapsed.
  *
  * Upon a successful return from this function, preemption and local interrupts
  * are disabled so the caller must not sleep, and is advised to release the
  * hwspinlock as soon as possible.
  *
  * Returns 0 when the @hwlock was successfully taken, and an appropriate
  * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
  * busy after @timeout msecs). The function will never sleep.
  */
 static inline
 int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int to)
 {
 	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQ, NULL);
 }

 /**
  * hwspin_lock_timeout() - lock an hwspinlock with timeout limit
  * @hwlock: the hwspinlock to be locked
  * @to: timeout value in msecs
  *
  * This function locks the underlying @hwlock. If the @hwlock
  * is already taken, the function will busy loop waiting for it to
  * be released, but give up when @timeout msecs have elapsed.
  *
  * Upon a successful return from this function, preemption is disabled
  * so the caller must not sleep, and is advised to release the hwspinlock
  * as soon as possible.
  * This is required in order to minimize remote cores polling on the
  * hardware interconnect.
  *
  * Returns 0 when the @hwlock was successfully taken, and an appropriate
  * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
  * busy after @timeout msecs). The function will never sleep.
  */
 static inline
 int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to)
 {
 	return __hwspin_lock_timeout(hwlock, to, 0, NULL);
 }

 /**
  * hwspin_unlock_irqrestore() - unlock hwspinlock, restore irq state
  * @hwlock: a previously-acquired hwspinlock which we want to unlock
  * @flags: previous caller's interrupt state to restore
  *
  * This function will unlock a specific hwspinlock, enable preemption and
  * restore the previous state of the local interrupts. It should be used
  * to undo, e.g., hwspin_trylock_irqsave().
  *
  * @hwlock must be already locked before calling this function: it is a bug
  * to call unlock on a @hwlock that is already unlocked.
  */
 static inline void hwspin_unlock_irqrestore(struct hwspinlock *hwlock,
 							unsigned long *flags)
 {
 	__hwspin_unlock(hwlock, HWLOCK_IRQSTATE, flags);
 }

 /**
  * hwspin_unlock_irq() - unlock hwspinlock, enable interrupts
  * @hwlock: a previously-acquired hwspinlock which we want to unlock
  *
  * This function will unlock a specific hwspinlock, enable preemption and
  * enable local interrupts. Should be used to undo hwspin_lock_irq().
  *
  * @hwlock must be already locked (e.g. by hwspin_trylock_irq()) before
  * calling this function: it is a bug to call unlock on a @hwlock that is
  * already unlocked.
  */
 static inline void hwspin_unlock_irq(struct hwspinlock *hwlock)
 {
 	__hwspin_unlock(hwlock, HWLOCK_IRQ, NULL);
 }

 /**
  * hwspin_unlock() - unlock hwspinlock
  * @hwlock: a previously-acquired hwspinlock which we want to unlock
  *
  * This function will unlock a specific hwspinlock and enable preemption
  * back.
  *
  * @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
  * this function: it is a bug to call unlock on a @hwlock that is already
  * unlocked.
  */
 static inline void hwspin_unlock(struct hwspinlock *hwlock)
 {
 	__hwspin_unlock(hwlock, 0, NULL);
 }

 #endif /* __LINUX_HWSPINLOCK_H */
	/*
	* Hardware spinlock public header
	*
	* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
	*
	* Contact: Ohad Ben-Cohen <ohad@wizery.com>
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published
	* by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#ifndef __LINUX_HWSPINLOCK_H
	#define __LINUX_HWSPINLOCK_H

	#include <linux/err.h>
	#include <linux/sched.h>
	#include <linux/device.h>

	/* hwspinlock mode argument */
	#define HWLOCK_IRQSTATE 0x01 /* Disable interrupts, save state */
	#define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */

	struct hwspinlock;
	struct hwspinlock_device;
	struct hwspinlock_ops;

	/**
	* struct hwspinlock_pdata - platform data for hwspinlock drivers
	* @base_id: base id for this hwspinlock device
	*
	* hwspinlock devices provide system-wide hardware locks that are used
	* by remote processors that have no other way to achieve synchronization.
	*
	* To achieve that, each physical lock must have a system-wide id number
	* that is agreed upon, otherwise remote processors can't possibly assume
	* they're using the same hardware lock.
	*
	* Usually boards have a single hwspinlock device, which provides several
	* hwspinlocks, and in this case, they can be trivially numbered 0 to
	* (num-of-locks - 1).
	*
	* In case boards have several hwspinlocks devices, a different base id
	* should be used for each hwspinlock device (they can't all use 0 as
	* a starting id!).
	*
	* This platform data structure should be used to provide the base id
	* for each device (which is trivially 0 when only a single hwspinlock
	* device exists). It can be shared between different platforms, hence
	* its location.
	*/
	struct hwspinlock_pdata {
	int base_id;
	};

	#if defined(CONFIG_HWSPINLOCK) \|\| defined(CONFIG_HWSPINLOCK_MODULE)

	int hwspin_lock_register(struct hwspinlock_device bank, struct device dev,
	const struct hwspinlock_ops *ops, int base_id, int num_locks);
	int hwspin_lock_unregister(struct hwspinlock_device *bank);
	struct hwspinlock *hwspin_lock_request(void);
	struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
	int hwspin_lock_free(struct hwspinlock *hwlock);
	int hwspin_lock_get_id(struct hwspinlock *hwlock);
	int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
	unsigned long *);
	int __hwspin_trylock(struct hwspinlock , int, unsigned long );
	void __hwspin_unlock(struct hwspinlock , int, unsigned long );

	#else /* !CONFIG_HWSPINLOCK */

	/*
	* We don't want these functions to fail if CONFIG_HWSPINLOCK is not
	* enabled. We prefer to silently succeed in this case, and let the
	* code path get compiled away. This way, if CONFIG_HWSPINLOCK is not
	* required on a given setup, users will still work.
	*
	* The only exception is hwspin_lock_register/hwspin_lock_unregister, with which
	* we _do_ want users to fail (no point in registering hwspinlock instances if
	* the framework is not available).
	*
	* Note: ERR_PTR(-ENODEV) will still be considered a success for NULL-checking
	* users. Others, which care, can still check this with IS_ERR.
	*/
	static inline struct hwspinlock *hwspin_lock_request(void)
	{
	return ERR_PTR(-ENODEV);
	}

	static inline struct hwspinlock *hwspin_lock_request_specific(unsigned int id)
	{
	return ERR_PTR(-ENODEV);
	}

	static inline int hwspin_lock_free(struct hwspinlock *hwlock)
	{
	return 0;
	}

	static inline
	int __hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to,
	int mode, unsigned long *flags)
	{
	return 0;
	}

	static inline
	int __hwspin_trylock(struct hwspinlock hwlock, int mode, unsigned long flags)
	{
	return 0;
	}

	static inline
	void __hwspin_unlock(struct hwspinlock hwlock, int mode, unsigned long flags)
	{
	}

	static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
	{
	return 0;
	}

	#endif /* !CONFIG_HWSPINLOCK */

	/**
	* hwspin_trylock_irqsave() - try to lock an hwspinlock, disable interrupts
	* @hwlock: an hwspinlock which we want to trylock
	* @flags: a pointer to where the caller's interrupt state will be saved at
	*
	* This function attempts to lock the underlying hwspinlock, and will
	* immediately fail if the hwspinlock is already locked.
	*
	* Upon a successful return from this function, preemption and local
	* interrupts are disabled (previous interrupts state is saved at @flags),
	* so the caller must not sleep, and is advised to release the hwspinlock
	* as soon as possible.
	*
	* Returns 0 if we successfully locked the hwspinlock, -EBUSY if
	* the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
	*/
	static inline
	int hwspin_trylock_irqsave(struct hwspinlock hwlock, unsigned long flags)
	{
	return __hwspin_trylock(hwlock, HWLOCK_IRQSTATE, flags);
	}

	/**
	* hwspin_trylock_irq() - try to lock an hwspinlock, disable interrupts
	* @hwlock: an hwspinlock which we want to trylock
	*
	* This function attempts to lock the underlying hwspinlock, and will
	* immediately fail if the hwspinlock is already locked.
	*
	* Upon a successful return from this function, preemption and local
	* interrupts are disabled, so the caller must not sleep, and is advised
	* to release the hwspinlock as soon as possible.
	*
	* Returns 0 if we successfully locked the hwspinlock, -EBUSY if
	* the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
	*/
	static inline int hwspin_trylock_irq(struct hwspinlock *hwlock)
	{
	return __hwspin_trylock(hwlock, HWLOCK_IRQ, NULL);
	}

	/**
	* hwspin_trylock() - attempt to lock a specific hwspinlock
	* @hwlock: an hwspinlock which we want to trylock
	*
	* This function attempts to lock an hwspinlock, and will immediately fail
	* if the hwspinlock is already taken.
	*
	* Upon a successful return from this function, preemption is disabled,
	* so the caller must not sleep, and is advised to release the hwspinlock
	* as soon as possible. This is required in order to minimize remote cores
	* polling on the hardware interconnect.
	*
	* Returns 0 if we successfully locked the hwspinlock, -EBUSY if
	* the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
	*/
	static inline int hwspin_trylock(struct hwspinlock *hwlock)
	{
	return __hwspin_trylock(hwlock, 0, NULL);
	}

	/**
	* hwspin_lock_timeout_irqsave() - lock hwspinlock, with timeout, disable irqs
	* @hwlock: the hwspinlock to be locked
	* @to: timeout value in msecs
	* @flags: a pointer to where the caller's interrupt state will be saved at
	*
	* This function locks the underlying @hwlock. If the @hwlock
	* is already taken, the function will busy loop waiting for it to
	* be released, but give up when @timeout msecs have elapsed.
	*
	* Upon a successful return from this function, preemption and local interrupts
	* are disabled (plus previous interrupt state is saved), so the caller must
	* not sleep, and is advised to release the hwspinlock as soon as possible.
	*
	* Returns 0 when the @hwlock was successfully taken, and an appropriate
	* error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
	* busy after @timeout msecs). The function will never sleep.
	*/
	static inline int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock,
	unsigned int to, unsigned long *flags)
	{
	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQSTATE, flags);
	}

	/**
	* hwspin_lock_timeout_irq() - lock hwspinlock, with timeout, disable irqs
	* @hwlock: the hwspinlock to be locked
	* @to: timeout value in msecs
	*
	* This function locks the underlying @hwlock. If the @hwlock
	* is already taken, the function will busy loop waiting for it to
	* be released, but give up when @timeout msecs have elapsed.
	*
	* Upon a successful return from this function, preemption and local interrupts
	* are disabled so the caller must not sleep, and is advised to release the
	* hwspinlock as soon as possible.
	*
	* Returns 0 when the @hwlock was successfully taken, and an appropriate
	* error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
	* busy after @timeout msecs). The function will never sleep.
	*/
	static inline
	int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int to)
	{
	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQ, NULL);
	}

	/**
	* hwspin_lock_timeout() - lock an hwspinlock with timeout limit
	* @hwlock: the hwspinlock to be locked
	* @to: timeout value in msecs
	*
	* This function locks the underlying @hwlock. If the @hwlock
	* is already taken, the function will busy loop waiting for it to
	* be released, but give up when @timeout msecs have elapsed.
	*
	* Upon a successful return from this function, preemption is disabled
	* so the caller must not sleep, and is advised to release the hwspinlock
	* as soon as possible.
	* This is required in order to minimize remote cores polling on the
	* hardware interconnect.
	*
	* Returns 0 when the @hwlock was successfully taken, and an appropriate
	* error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
	* busy after @timeout msecs). The function will never sleep.
	*/
	static inline
	int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to)
	{
	return __hwspin_lock_timeout(hwlock, to, 0, NULL);
	}

	/**
	* hwspin_unlock_irqrestore() - unlock hwspinlock, restore irq state
	* @hwlock: a previously-acquired hwspinlock which we want to unlock
	* @flags: previous caller's interrupt state to restore
	*
	* This function will unlock a specific hwspinlock, enable preemption and
	* restore the previous state of the local interrupts. It should be used
	* to undo, e.g., hwspin_trylock_irqsave().
	*
	* @hwlock must be already locked before calling this function: it is a bug
	* to call unlock on a @hwlock that is already unlocked.
	*/
	static inline void hwspin_unlock_irqrestore(struct hwspinlock *hwlock,
	unsigned long *flags)
	{
	__hwspin_unlock(hwlock, HWLOCK_IRQSTATE, flags);
	}

	/**
	* hwspin_unlock_irq() - unlock hwspinlock, enable interrupts
	* @hwlock: a previously-acquired hwspinlock which we want to unlock
	*
	* This function will unlock a specific hwspinlock, enable preemption and
	* enable local interrupts. Should be used to undo hwspin_lock_irq().
	*
	* @hwlock must be already locked (e.g. by hwspin_trylock_irq()) before
	* calling this function: it is a bug to call unlock on a @hwlock that is
	* already unlocked.
	*/
	static inline void hwspin_unlock_irq(struct hwspinlock *hwlock)
	{
	__hwspin_unlock(hwlock, HWLOCK_IRQ, NULL);
	}

	/**
	* hwspin_unlock() - unlock hwspinlock
	* @hwlock: a previously-acquired hwspinlock which we want to unlock
	*
	* This function will unlock a specific hwspinlock and enable preemption
	* back.
	*
	* @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
	* this function: it is a bug to call unlock on a @hwlock that is already
	* unlocked.
	*/
	static inline void hwspin_unlock(struct hwspinlock *hwlock)
	{
	__hwspin_unlock(hwlock, 0, NULL);
	}

	#endif /* __LINUX_HWSPINLOCK_H */