blob: f854d85a387c0956a6cf4caf349ff9a5af056377 [file] [log] [blame]
/*
* V4L2 Driver for SuperH Mobile CEU interface
*
* Copyright (C) 2008 Magnus Damm
*
* Based on V4L2 Driver for PXA camera host - "pxa_camera.c",
*
* Copyright (C) 2006, Sascha Hauer, Pengutronix
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/moduleparam.h>
#include <linux/time.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/videodev2.h>
#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
#include <media/soc_camera.h>
#include <media/sh_mobile_ceu.h>
#include <media/sh_mobile_csi2.h>
#include <media/videobuf2-dma-contig.h>
#include <media/v4l2-mediabus.h>
#include <media/soc_mediabus.h>
/* register offsets for sh7722 / sh7723 */
#define CAPSR 0x00 /* Capture start register */
#define CAPCR 0x04 /* Capture control register */
#define CAMCR 0x08 /* Capture interface control register */
#define CMCYR 0x0c /* Capture interface cycle register */
#define CAMOR 0x10 /* Capture interface offset register */
#define CAPWR 0x14 /* Capture interface width register */
#define CAIFR 0x18 /* Capture interface input format register */
#define CSTCR 0x20 /* Camera strobe control register (<= sh7722) */
#define CSECR 0x24 /* Camera strobe emission count register (<= sh7722) */
#define CRCNTR 0x28 /* CEU register control register */
#define CRCMPR 0x2c /* CEU register forcible control register */
#define CFLCR 0x30 /* Capture filter control register */
#define CFSZR 0x34 /* Capture filter size clip register */
#define CDWDR 0x38 /* Capture destination width register */
#define CDAYR 0x3c /* Capture data address Y register */
#define CDACR 0x40 /* Capture data address C register */
#define CDBYR 0x44 /* Capture data bottom-field address Y register */
#define CDBCR 0x48 /* Capture data bottom-field address C register */
#define CBDSR 0x4c /* Capture bundle destination size register */
#define CFWCR 0x5c /* Firewall operation control register */
#define CLFCR 0x60 /* Capture low-pass filter control register */
#define CDOCR 0x64 /* Capture data output control register */
#define CDDCR 0x68 /* Capture data complexity level register */
#define CDDAR 0x6c /* Capture data complexity level address register */
#define CEIER 0x70 /* Capture event interrupt enable register */
#define CETCR 0x74 /* Capture event flag clear register */
#define CSTSR 0x7c /* Capture status register */
#define CSRTR 0x80 /* Capture software reset register */
#define CDSSR 0x84 /* Capture data size register */
#define CDAYR2 0x90 /* Capture data address Y register 2 */
#define CDACR2 0x94 /* Capture data address C register 2 */
#define CDBYR2 0x98 /* Capture data bottom-field address Y register 2 */
#define CDBCR2 0x9c /* Capture data bottom-field address C register 2 */
#undef DEBUG_GEOMETRY
#ifdef DEBUG_GEOMETRY
#define dev_geo dev_info
#else
#define dev_geo dev_dbg
#endif
/* per video frame buffer */
struct sh_mobile_ceu_buffer {
struct vb2_buffer vb; /* v4l buffer must be first */
struct list_head queue;
};
struct sh_mobile_ceu_dev {
struct soc_camera_host ici;
struct soc_camera_device *icd;
struct platform_device *csi2_pdev;
unsigned int irq;
void __iomem *base;
size_t video_limit;
size_t buf_total;
spinlock_t lock; /* Protects video buffer lists */
struct list_head capture;
struct vb2_buffer *active;
struct vb2_alloc_ctx *alloc_ctx;
struct sh_mobile_ceu_info *pdata;
struct completion complete;
u32 cflcr;
enum v4l2_field field;
int sequence;
unsigned int image_mode:1;
unsigned int is_16bit:1;
unsigned int frozen:1;
};
struct sh_mobile_ceu_cam {
/* CEU offsets within the camera output, before the CEU scaler */
unsigned int ceu_left;
unsigned int ceu_top;
/* Client output, as seen by the CEU */
unsigned int width;
unsigned int height;
/*
* User window from S_CROP / G_CROP, produced by client cropping and
* scaling, CEU scaling and CEU cropping, mapped back onto the client
* input window
*/
struct v4l2_rect subrect;
/* Camera cropping rectangle */
struct v4l2_rect rect;
const struct soc_mbus_pixelfmt *extra_fmt;
enum v4l2_mbus_pixelcode code;
};
static struct sh_mobile_ceu_buffer *to_ceu_vb(struct vb2_buffer *vb)
{
return container_of(vb, struct sh_mobile_ceu_buffer, vb);
}
static void ceu_write(struct sh_mobile_ceu_dev *priv,
unsigned long reg_offs, u32 data)
{
iowrite32(data, priv->base + reg_offs);
}
static u32 ceu_read(struct sh_mobile_ceu_dev *priv, unsigned long reg_offs)
{
return ioread32(priv->base + reg_offs);
}
static int sh_mobile_ceu_soft_reset(struct sh_mobile_ceu_dev *pcdev)
{
int i, success = 0;
struct soc_camera_device *icd = pcdev->icd;
ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
/* wait CSTSR.CPTON bit */
for (i = 0; i < 1000; i++) {
if (!(ceu_read(pcdev, CSTSR) & 1)) {
success++;
break;
}
udelay(1);
}
/* wait CAPSR.CPKIL bit */
for (i = 0; i < 1000; i++) {
if (!(ceu_read(pcdev, CAPSR) & (1 << 16))) {
success++;
break;
}
udelay(1);
}
if (2 != success) {
dev_warn(icd->pdev, "soft reset time out\n");
return -EIO;
}
return 0;
}
/*
* Videobuf operations
*/
/*
* .queue_setup() is called to check, whether the driver can accept the
* requested number of buffers and to fill in plane sizes
* for the current frame format if required
*/
static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq,
const struct v4l2_format *fmt,
unsigned int *count, unsigned int *num_planes,
unsigned int sizes[], void *alloc_ctxs[])
{
struct soc_camera_device *icd = container_of(vq, struct soc_camera_device, vb2_vidq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
int bytes_per_line;
unsigned int height;
if (fmt) {
const struct soc_camera_format_xlate *xlate = soc_camera_xlate_by_fourcc(icd,
fmt->fmt.pix.pixelformat);
if (!xlate)
return -EINVAL;
bytes_per_line = soc_mbus_bytes_per_line(fmt->fmt.pix.width,
xlate->host_fmt);
height = fmt->fmt.pix.height;
} else {
/* Called from VIDIOC_REQBUFS or in compatibility mode */
bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
icd->current_fmt->host_fmt);
height = icd->user_height;
}
if (bytes_per_line < 0)
return bytes_per_line;
sizes[0] = bytes_per_line * height;
alloc_ctxs[0] = pcdev->alloc_ctx;
if (!vq->num_buffers)
pcdev->sequence = 0;
if (!*count)
*count = 2;
/* If *num_planes != 0, we have already verified *count. */
if (pcdev->video_limit && !*num_planes) {
size_t size = PAGE_ALIGN(sizes[0]) * *count;
if (size + pcdev->buf_total > pcdev->video_limit)
*count = (pcdev->video_limit - pcdev->buf_total) /
PAGE_ALIGN(sizes[0]);
}
*num_planes = 1;
dev_dbg(icd->parent, "count=%d, size=%u\n", *count, sizes[0]);
return 0;
}
#define CEU_CETCR_MAGIC 0x0317f313 /* acknowledge magical interrupt sources */
#define CEU_CETCR_IGRW (1 << 4) /* prohibited register access interrupt bit */
#define CEU_CEIER_CPEIE (1 << 0) /* one-frame capture end interrupt */
#define CEU_CEIER_VBP (1 << 20) /* vbp error */
#define CEU_CAPCR_CTNCP (1 << 16) /* continuous capture mode (if set) */
#define CEU_CEIER_MASK (CEU_CEIER_CPEIE | CEU_CEIER_VBP)
/*
* return value doesn't reflex the success/failure to queue the new buffer,
* but rather the status of the previous buffer.
*/
static int sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev)
{
struct soc_camera_device *icd = pcdev->icd;
dma_addr_t phys_addr_top, phys_addr_bottom;
unsigned long top1, top2;
unsigned long bottom1, bottom2;
u32 status;
bool planar;
int ret = 0;
/*
* The hardware is _very_ picky about this sequence. Especially
* the CEU_CETCR_MAGIC value. It seems like we need to acknowledge
* several not-so-well documented interrupt sources in CETCR.
*/
ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) & ~CEU_CEIER_MASK);
status = ceu_read(pcdev, CETCR);
ceu_write(pcdev, CETCR, ~status & CEU_CETCR_MAGIC);
if (!pcdev->frozen)
ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) | CEU_CEIER_MASK);
ceu_write(pcdev, CAPCR, ceu_read(pcdev, CAPCR) & ~CEU_CAPCR_CTNCP);
ceu_write(pcdev, CETCR, CEU_CETCR_MAGIC ^ CEU_CETCR_IGRW);
/*
* When a VBP interrupt occurs, a capture end interrupt does not occur
* and the image of that frame is not captured correctly. So, soft reset
* is needed here.
*/
if (status & CEU_CEIER_VBP) {
sh_mobile_ceu_soft_reset(pcdev);
ret = -EIO;
}
if (pcdev->frozen) {
complete(&pcdev->complete);
return ret;
}
if (!pcdev->active)
return ret;
if (V4L2_FIELD_INTERLACED_BT == pcdev->field) {
top1 = CDBYR;
top2 = CDBCR;
bottom1 = CDAYR;
bottom2 = CDACR;
} else {
top1 = CDAYR;
top2 = CDACR;
bottom1 = CDBYR;
bottom2 = CDBCR;
}
phys_addr_top = vb2_dma_contig_plane_dma_addr(pcdev->active, 0);
switch (icd->current_fmt->host_fmt->fourcc) {
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV21:
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
planar = true;
break;
default:
planar = false;
}
ceu_write(pcdev, top1, phys_addr_top);
if (V4L2_FIELD_NONE != pcdev->field) {
if (planar)
phys_addr_bottom = phys_addr_top + icd->user_width;
else
phys_addr_bottom = phys_addr_top +
soc_mbus_bytes_per_line(icd->user_width,
icd->current_fmt->host_fmt);
ceu_write(pcdev, bottom1, phys_addr_bottom);
}
if (planar) {
phys_addr_top += icd->user_width *
icd->user_height;
ceu_write(pcdev, top2, phys_addr_top);
if (V4L2_FIELD_NONE != pcdev->field) {
phys_addr_bottom = phys_addr_top + icd->user_width;
ceu_write(pcdev, bottom2, phys_addr_bottom);
}
}
ceu_write(pcdev, CAPSR, 0x1); /* start capture */
return ret;
}
static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
{
struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
/* Added list head initialization on alloc */
WARN(!list_empty(&buf->queue), "Buffer %p on queue!\n", vb);
return 0;
}
static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
unsigned long size;
int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
icd->current_fmt->host_fmt);
if (bytes_per_line < 0)
goto error;
size = icd->user_height * bytes_per_line;
if (vb2_plane_size(vb, 0) < size) {
dev_err(icd->parent, "Buffer #%d too small (%lu < %lu)\n",
vb->v4l2_buf.index, vb2_plane_size(vb, 0), size);
goto error;
}
vb2_set_plane_payload(vb, 0, size);
dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
#ifdef DEBUG
/*
* This can be useful if you want to see if we actually fill
* the buffer with something
*/
if (vb2_plane_vaddr(vb, 0))
memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0));
#endif
spin_lock_irq(&pcdev->lock);
list_add_tail(&buf->queue, &pcdev->capture);
if (!pcdev->active) {
/*
* Because there were no active buffer at this moment,
* we are not interested in the return value of
* sh_mobile_ceu_capture here.
*/
pcdev->active = vb;
sh_mobile_ceu_capture(pcdev);
}
spin_unlock_irq(&pcdev->lock);
return;
error:
vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
}
static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
spin_lock_irq(&pcdev->lock);
if (pcdev->active == vb) {
/* disable capture (release DMA buffer), reset */
ceu_write(pcdev, CAPSR, 1 << 16);
pcdev->active = NULL;
}
/*
* Doesn't hurt also if the list is empty, but it hurts, if queuing the
* buffer failed, and .buf_init() hasn't been called
*/
if (buf->queue.next)
list_del_init(&buf->queue);
pcdev->buf_total -= PAGE_ALIGN(vb2_plane_size(vb, 0));
dev_dbg(icd->parent, "%s() %zu bytes buffers\n", __func__,
pcdev->buf_total);
spin_unlock_irq(&pcdev->lock);
}
static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
pcdev->buf_total += PAGE_ALIGN(vb2_plane_size(vb, 0));
dev_dbg(icd->parent, "%s() %zu bytes buffers\n", __func__,
pcdev->buf_total);
/* This is for locking debugging only */
INIT_LIST_HEAD(&to_ceu_vb(vb)->queue);
return 0;
}
static int sh_mobile_ceu_stop_streaming(struct vb2_queue *q)
{
struct soc_camera_device *icd = container_of(q, struct soc_camera_device, vb2_vidq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct list_head *buf_head, *tmp;
spin_lock_irq(&pcdev->lock);
pcdev->active = NULL;
list_for_each_safe(buf_head, tmp, &pcdev->capture)
list_del_init(buf_head);
spin_unlock_irq(&pcdev->lock);
return sh_mobile_ceu_soft_reset(pcdev);
}
static struct vb2_ops sh_mobile_ceu_videobuf_ops = {
.queue_setup = sh_mobile_ceu_videobuf_setup,
.buf_prepare = sh_mobile_ceu_videobuf_prepare,
.buf_queue = sh_mobile_ceu_videobuf_queue,
.buf_cleanup = sh_mobile_ceu_videobuf_release,
.buf_init = sh_mobile_ceu_videobuf_init,
.wait_prepare = soc_camera_unlock,
.wait_finish = soc_camera_lock,
.stop_streaming = sh_mobile_ceu_stop_streaming,
};
static irqreturn_t sh_mobile_ceu_irq(int irq, void *data)
{
struct sh_mobile_ceu_dev *pcdev = data;
struct vb2_buffer *vb;
int ret;
spin_lock(&pcdev->lock);
vb = pcdev->active;
if (!vb)
/* Stale interrupt from a released buffer */
goto out;
list_del_init(&to_ceu_vb(vb)->queue);
if (!list_empty(&pcdev->capture))
pcdev->active = &list_entry(pcdev->capture.next,
struct sh_mobile_ceu_buffer, queue)->vb;
else
pcdev->active = NULL;
ret = sh_mobile_ceu_capture(pcdev);
do_gettimeofday(&vb->v4l2_buf.timestamp);
if (!ret) {
vb->v4l2_buf.field = pcdev->field;
vb->v4l2_buf.sequence = pcdev->sequence++;
}
vb2_buffer_done(vb, ret < 0 ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
out:
spin_unlock(&pcdev->lock);
return IRQ_HANDLED;
}
static struct v4l2_subdev *find_csi2(struct sh_mobile_ceu_dev *pcdev)
{
struct v4l2_subdev *sd;
if (!pcdev->csi2_pdev)
return NULL;
v4l2_device_for_each_subdev(sd, &pcdev->ici.v4l2_dev)
if (&pcdev->csi2_pdev->dev == v4l2_get_subdevdata(sd))
return sd;
return NULL;
}
/* Called with .video_lock held */
static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct v4l2_subdev *csi2_sd;
int ret;
if (pcdev->icd)
return -EBUSY;
dev_info(icd->parent,
"SuperH Mobile CEU driver attached to camera %d\n",
icd->devnum);
pm_runtime_get_sync(ici->v4l2_dev.dev);
pcdev->buf_total = 0;
ret = sh_mobile_ceu_soft_reset(pcdev);
csi2_sd = find_csi2(pcdev);
if (csi2_sd) {
csi2_sd->grp_id = soc_camera_grp_id(icd);
v4l2_set_subdev_hostdata(csi2_sd, icd);
}
ret = v4l2_subdev_call(csi2_sd, core, s_power, 1);
if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
pm_runtime_put_sync(ici->v4l2_dev.dev);
return ret;
}
/*
* -ENODEV is special: either csi2_sd == NULL or the CSI-2 driver
* has not found this soc-camera device among its clients
*/
if (ret == -ENODEV && csi2_sd)
csi2_sd->grp_id = 0;
pcdev->icd = icd;
return 0;
}
/* Called with .video_lock held */
static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct v4l2_subdev *csi2_sd = find_csi2(pcdev);
BUG_ON(icd != pcdev->icd);
v4l2_subdev_call(csi2_sd, core, s_power, 0);
if (csi2_sd)
csi2_sd->grp_id = 0;
/* disable capture, disable interrupts */
ceu_write(pcdev, CEIER, 0);
sh_mobile_ceu_soft_reset(pcdev);
/* make sure active buffer is canceled */
spin_lock_irq(&pcdev->lock);
if (pcdev->active) {
list_del_init(&to_ceu_vb(pcdev->active)->queue);
vb2_buffer_done(pcdev->active, VB2_BUF_STATE_ERROR);
pcdev->active = NULL;
}
spin_unlock_irq(&pcdev->lock);
pm_runtime_put_sync(ici->v4l2_dev.dev);
dev_info(icd->parent,
"SuperH Mobile CEU driver detached from camera %d\n",
icd->devnum);
pcdev->icd = NULL;
}
/*
* See chapter 29.4.12 "Capture Filter Control Register (CFLCR)"
* in SH7722 Hardware Manual
*/
static unsigned int size_dst(unsigned int src, unsigned int scale)
{
unsigned int mant_pre = scale >> 12;
if (!src || !scale)
return src;
return ((mant_pre + 2 * (src - 1)) / (2 * mant_pre) - 1) *
mant_pre * 4096 / scale + 1;
}
static u16 calc_scale(unsigned int src, unsigned int *dst)
{
u16 scale;
if (src == *dst)
return 0;
scale = (src * 4096 / *dst) & ~7;
while (scale > 4096 && size_dst(src, scale) < *dst)
scale -= 8;
*dst = size_dst(src, scale);
return scale;
}
/* rect is guaranteed to not exceed the scaled camera rectangle */
static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct sh_mobile_ceu_dev *pcdev = ici->priv;
unsigned int height, width, cdwdr_width, in_width, in_height;
unsigned int left_offset, top_offset;
u32 camor;
dev_geo(icd->parent, "Crop %ux%u@%u:%u\n",
icd->user_width, icd->user_height, cam->ceu_left, cam->ceu_top);
left_offset = cam->ceu_left;
top_offset = cam->ceu_top;
WARN_ON(icd->user_width & 3 || icd->user_height & 3);
width = icd->user_width;
if (pcdev->image_mode) {
in_width = cam->width;
if (!pcdev->is_16bit) {
in_width *= 2;
left_offset *= 2;
}
cdwdr_width = width;
} else {
int bytes_per_line = soc_mbus_bytes_per_line(width,
icd->current_fmt->host_fmt);
unsigned int w_factor;
switch (icd->current_fmt->host_fmt->packing) {
case SOC_MBUS_PACKING_2X8_PADHI:
w_factor = 2;
break;
default:
w_factor = 1;
}
in_width = cam->width * w_factor;
left_offset *= w_factor;
if (bytes_per_line < 0)
cdwdr_width = width;
else
cdwdr_width = bytes_per_line;
}
height = icd->user_height;
in_height = cam->height;
if (V4L2_FIELD_NONE != pcdev->field) {
height = (height / 2) & ~3;
in_height /= 2;
top_offset /= 2;
cdwdr_width *= 2;
}
/* CSI2 special configuration */
if (pcdev->pdata->csi2) {
in_width = ((in_width - 2) * 2);
left_offset *= 2;
}
/* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */
camor = left_offset | (top_offset << 16);
dev_geo(icd->parent,
"CAMOR 0x%x, CAPWR 0x%x, CFSZR 0x%x, CDWDR 0x%x\n", camor,
(in_height << 16) | in_width, (height << 16) | width,
cdwdr_width);
ceu_write(pcdev, CAMOR, camor);
ceu_write(pcdev, CAPWR, (in_height << 16) | in_width);
/* CFSZR clipping is applied _after_ the scaling filter (CFLCR) */
ceu_write(pcdev, CFSZR, (height << 16) | width);
ceu_write(pcdev, CDWDR, cdwdr_width);
}
static u32 capture_save_reset(struct sh_mobile_ceu_dev *pcdev)
{
u32 capsr = ceu_read(pcdev, CAPSR);
ceu_write(pcdev, CAPSR, 1 << 16); /* reset, stop capture */
return capsr;
}
static void capture_restore(struct sh_mobile_ceu_dev *pcdev, u32 capsr)
{
unsigned long timeout = jiffies + 10 * HZ;
/*
* Wait until the end of the current frame. It can take a long time,
* but if it has been aborted by a CAPSR reset, it shoule exit sooner.
*/
while ((ceu_read(pcdev, CSTSR) & 1) && time_before(jiffies, timeout))
msleep(1);
if (time_after(jiffies, timeout)) {
dev_err(pcdev->ici.v4l2_dev.dev,
"Timeout waiting for frame end! Interface problem?\n");
return;
}
/* Wait until reset clears, this shall not hang... */
while (ceu_read(pcdev, CAPSR) & (1 << 16))
udelay(10);
/* Anything to restore? */
if (capsr & ~(1 << 16))
ceu_write(pcdev, CAPSR, capsr);
}
/* Find the bus subdevice driver, e.g., CSI2 */
static struct v4l2_subdev *find_bus_subdev(struct sh_mobile_ceu_dev *pcdev,
struct soc_camera_device *icd)
{
if (pcdev->csi2_pdev) {
struct v4l2_subdev *csi2_sd = find_csi2(pcdev);
if (csi2_sd && csi2_sd->grp_id == soc_camera_grp_id(icd))
return csi2_sd;
}
return soc_camera_to_subdev(icd);
}
#define CEU_BUS_FLAGS (V4L2_MBUS_MASTER | \
V4L2_MBUS_PCLK_SAMPLE_RISING | \
V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
V4L2_MBUS_HSYNC_ACTIVE_LOW | \
V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
V4L2_MBUS_VSYNC_ACTIVE_LOW | \
V4L2_MBUS_DATA_ACTIVE_HIGH)
/* Capture is not running, no interrupts, no locking needed */
static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct v4l2_subdev *sd = find_bus_subdev(pcdev, icd);
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
unsigned long value, common_flags = CEU_BUS_FLAGS;
u32 capsr = capture_save_reset(pcdev);
unsigned int yuv_lineskip;
int ret;
/*
* If the client doesn't implement g_mbus_config, we just use our
* platform data
*/
ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
if (!ret) {
common_flags = soc_mbus_config_compatible(&cfg,
common_flags);
if (!common_flags)
return -EINVAL;
} else if (ret != -ENOIOCTLCMD) {
return ret;
}
/* Make choises, based on platform preferences */
if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
(common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
if (pcdev->pdata->flags & SH_CEU_FLAG_HSYNC_LOW)
common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
else
common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
}
if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
(common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
if (pcdev->pdata->flags & SH_CEU_FLAG_VSYNC_LOW)
common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
else
common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
}
cfg.flags = common_flags;
ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
if (ret < 0 && ret != -ENOIOCTLCMD)
return ret;
if (icd->current_fmt->host_fmt->bits_per_sample > 8)
pcdev->is_16bit = 1;
else
pcdev->is_16bit = 0;
ceu_write(pcdev, CRCNTR, 0);
ceu_write(pcdev, CRCMPR, 0);
value = 0x00000010; /* data fetch by default */
yuv_lineskip = 0x10;
switch (icd->current_fmt->host_fmt->fourcc) {
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV21:
/* convert 4:2:2 -> 4:2:0 */
yuv_lineskip = 0; /* skip for NV12/21, no skip for NV16/61 */
/* fall-through */
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
switch (cam->code) {
case V4L2_MBUS_FMT_UYVY8_2X8:
value = 0x00000000; /* Cb0, Y0, Cr0, Y1 */
break;
case V4L2_MBUS_FMT_VYUY8_2X8:
value = 0x00000100; /* Cr0, Y0, Cb0, Y1 */
break;
case V4L2_MBUS_FMT_YUYV8_2X8:
value = 0x00000200; /* Y0, Cb0, Y1, Cr0 */
break;
case V4L2_MBUS_FMT_YVYU8_2X8:
value = 0x00000300; /* Y0, Cr0, Y1, Cb0 */
break;
default:
BUG();
}
}
if (icd->current_fmt->host_fmt->fourcc == V4L2_PIX_FMT_NV21 ||
icd->current_fmt->host_fmt->fourcc == V4L2_PIX_FMT_NV61)
value ^= 0x00000100; /* swap U, V to change from NV1x->NVx1 */
value |= common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
value |= common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
value |= pcdev->is_16bit ? 1 << 12 : 0;
/* CSI2 mode */
if (pcdev->pdata->csi2)
value |= 3 << 12;
ceu_write(pcdev, CAMCR, value);
ceu_write(pcdev, CAPCR, 0x00300000);
switch (pcdev->field) {
case V4L2_FIELD_INTERLACED_TB:
value = 0x101;
break;
case V4L2_FIELD_INTERLACED_BT:
value = 0x102;
break;
default:
value = 0;
break;
}
ceu_write(pcdev, CAIFR, value);
sh_mobile_ceu_set_rect(icd);
mdelay(1);
dev_geo(icd->parent, "CFLCR 0x%x\n", pcdev->cflcr);
ceu_write(pcdev, CFLCR, pcdev->cflcr);
/*
* A few words about byte order (observed in Big Endian mode)
*
* In data fetch mode bytes are received in chunks of 8 bytes.
* D0, D1, D2, D3, D4, D5, D6, D7 (D0 received first)
*
* The data is however by default written to memory in reverse order:
* D7, D6, D5, D4, D3, D2, D1, D0 (D7 written to lowest byte)
*
* The lowest three bits of CDOCR allows us to do swapping,
* using 7 we swap the data bytes to match the incoming order:
* D0, D1, D2, D3, D4, D5, D6, D7
*/
value = 0x00000007 | yuv_lineskip;
ceu_write(pcdev, CDOCR, value);
ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
capture_restore(pcdev, capsr);
/* not in bundle mode: skip CBDSR, CDAYR2, CDACR2, CDBYR2, CDBCR2 */
return 0;
}
static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd,
unsigned char buswidth)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct v4l2_subdev *sd = find_bus_subdev(pcdev, icd);
unsigned long common_flags = CEU_BUS_FLAGS;
struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
int ret;
ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
if (!ret)
common_flags = soc_mbus_config_compatible(&cfg,
common_flags);
else if (ret != -ENOIOCTLCMD)
return ret;
if (!common_flags || buswidth > 16)
return -EINVAL;
return 0;
}
static const struct soc_mbus_pixelfmt sh_mobile_ceu_formats[] = {
{
.fourcc = V4L2_PIX_FMT_NV12,
.name = "NV12",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_1_5X8,
.order = SOC_MBUS_ORDER_LE,
}, {
.fourcc = V4L2_PIX_FMT_NV21,
.name = "NV21",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_1_5X8,
.order = SOC_MBUS_ORDER_LE,
}, {
.fourcc = V4L2_PIX_FMT_NV16,
.name = "NV16",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
}, {
.fourcc = V4L2_PIX_FMT_NV61,
.name = "NV61",
.bits_per_sample = 8,
.packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
},
};
/* This will be corrected as we get more formats */
static bool sh_mobile_ceu_packing_supported(const struct soc_mbus_pixelfmt *fmt)
{
return fmt->packing == SOC_MBUS_PACKING_NONE ||
(fmt->bits_per_sample == 8 &&
fmt->packing == SOC_MBUS_PACKING_1_5X8) ||
(fmt->bits_per_sample == 8 &&
fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
(fmt->bits_per_sample > 8 &&
fmt->packing == SOC_MBUS_PACKING_EXTEND16);
}
static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect);
static struct soc_camera_device *ctrl_to_icd(struct v4l2_ctrl *ctrl)
{
return container_of(ctrl->handler, struct soc_camera_device,
ctrl_handler);
}
static int sh_mobile_ceu_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct soc_camera_device *icd = ctrl_to_icd(ctrl);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
switch (ctrl->id) {
case V4L2_CID_SHARPNESS:
switch (icd->current_fmt->host_fmt->fourcc) {
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV21:
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
ceu_write(pcdev, CLFCR, !ctrl->val);
return 0;
}
break;
}
return -EINVAL;
}
static const struct v4l2_ctrl_ops sh_mobile_ceu_ctrl_ops = {
.s_ctrl = sh_mobile_ceu_s_ctrl,
};
static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int idx,
struct soc_camera_format_xlate *xlate)
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct device *dev = icd->parent;
struct soc_camera_host *ici = to_soc_camera_host(dev);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
int ret, k, n;
int formats = 0;
struct sh_mobile_ceu_cam *cam;
enum v4l2_mbus_pixelcode code;
const struct soc_mbus_pixelfmt *fmt;
ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code);
if (ret < 0)
/* No more formats */
return 0;
fmt = soc_mbus_get_fmtdesc(code);
if (!fmt) {
dev_warn(dev, "unsupported format code #%u: %d\n", idx, code);
return 0;
}
if (!pcdev->pdata->csi2) {
/* Are there any restrictions in the CSI-2 case? */
ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample);
if (ret < 0)
return 0;
}
if (!icd->host_priv) {
struct v4l2_mbus_framefmt mf;
struct v4l2_rect rect;
int shift = 0;
/* Add our control */
v4l2_ctrl_new_std(&icd->ctrl_handler, &sh_mobile_ceu_ctrl_ops,
V4L2_CID_SHARPNESS, 0, 1, 1, 0);
if (icd->ctrl_handler.error)
return icd->ctrl_handler.error;
/* FIXME: subwindow is lost between close / open */
/* Cache current client geometry */
ret = client_g_rect(sd, &rect);
if (ret < 0)
return ret;
/* First time */
ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
if (ret < 0)
return ret;
while ((mf.width > 2560 || mf.height > 1920) && shift < 4) {
/* Try 2560x1920, 1280x960, 640x480, 320x240 */
mf.width = 2560 >> shift;
mf.height = 1920 >> shift;
ret = v4l2_device_call_until_err(sd->v4l2_dev,
soc_camera_grp_id(icd), video,
s_mbus_fmt, &mf);
if (ret < 0)
return ret;
shift++;
}
if (shift == 4) {
dev_err(dev, "Failed to configure the client below %ux%x\n",
mf.width, mf.height);
return -EIO;
}
dev_geo(dev, "camera fmt %ux%u\n", mf.width, mf.height);
cam = kzalloc(sizeof(*cam), GFP_KERNEL);
if (!cam)
return -ENOMEM;
/* We are called with current camera crop, initialise subrect with it */
cam->rect = rect;
cam->subrect = rect;
cam->width = mf.width;
cam->height = mf.height;
icd->host_priv = cam;
} else {
cam = icd->host_priv;
}
/* Beginning of a pass */
if (!idx)
cam->extra_fmt = NULL;
switch (code) {
case V4L2_MBUS_FMT_UYVY8_2X8:
case V4L2_MBUS_FMT_VYUY8_2X8:
case V4L2_MBUS_FMT_YUYV8_2X8:
case V4L2_MBUS_FMT_YVYU8_2X8:
if (cam->extra_fmt)
break;
/*
* Our case is simple so far: for any of the above four camera
* formats we add all our four synthesized NV* formats, so,
* just marking the device with a single flag suffices. If
* the format generation rules are more complex, you would have
* to actually hang your already added / counted formats onto
* the host_priv pointer and check whether the format you're
* going to add now is already there.
*/
cam->extra_fmt = sh_mobile_ceu_formats;
n = ARRAY_SIZE(sh_mobile_ceu_formats);
formats += n;
for (k = 0; xlate && k < n; k++) {
xlate->host_fmt = &sh_mobile_ceu_formats[k];
xlate->code = code;
xlate++;
dev_dbg(dev, "Providing format %s using code %d\n",
sh_mobile_ceu_formats[k].name, code);
}
break;
default:
if (!sh_mobile_ceu_packing_supported(fmt))
return 0;
}
/* Generic pass-through */
formats++;
if (xlate) {
xlate->host_fmt = fmt;
xlate->code = code;
xlate++;
dev_dbg(dev, "Providing format %s in pass-through mode\n",
fmt->name);
}
return formats;
}
static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd)
{
kfree(icd->host_priv);
icd->host_priv = NULL;
}
/* Check if any dimension of r1 is smaller than respective one of r2 */
static bool is_smaller(struct v4l2_rect *r1, struct v4l2_rect *r2)
{
return r1->width < r2->width || r1->height < r2->height;
}
/* Check if r1 fails to cover r2 */
static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2)
{
return r1->left > r2->left || r1->top > r2->top ||
r1->left + r1->width < r2->left + r2->width ||
r1->top + r1->height < r2->top + r2->height;
}
static unsigned int scale_down(unsigned int size, unsigned int scale)
{
return (size * 4096 + scale / 2) / scale;
}
static unsigned int calc_generic_scale(unsigned int input, unsigned int output)
{
return (input * 4096 + output / 2) / output;
}
/* Get and store current client crop */
static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect)
{
struct v4l2_crop crop;
struct v4l2_cropcap cap;
int ret;
crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
ret = v4l2_subdev_call(sd, video, g_crop, &crop);
if (!ret) {
*rect = crop.c;
return ret;
}
/* Camera driver doesn't support .g_crop(), assume default rectangle */
cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
ret = v4l2_subdev_call(sd, video, cropcap, &cap);
if (!ret)
*rect = cap.defrect;
return ret;
}
/* Client crop has changed, update our sub-rectangle to remain within the area */
static void update_subrect(struct sh_mobile_ceu_cam *cam)
{
struct v4l2_rect *rect = &cam->rect, *subrect = &cam->subrect;
if (rect->width < subrect->width)
subrect->width = rect->width;
if (rect->height < subrect->height)
subrect->height = rect->height;
if (rect->left > subrect->left)
subrect->left = rect->left;
else if (rect->left + rect->width >
subrect->left + subrect->width)
subrect->left = rect->left + rect->width -
subrect->width;
if (rect->top > subrect->top)
subrect->top = rect->top;
else if (rect->top + rect->height >
subrect->top + subrect->height)
subrect->top = rect->top + rect->height -
subrect->height;
}
/*
* The common for both scaling and cropping iterative approach is:
* 1. try if the client can produce exactly what requested by the user
* 2. if (1) failed, try to double the client image until we get one big enough
* 3. if (2) failed, try to request the maximum image
*/
static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop,
struct v4l2_crop *cam_crop)
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c;
struct device *dev = sd->v4l2_dev->dev;
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct v4l2_cropcap cap;
int ret;
unsigned int width, height;
v4l2_subdev_call(sd, video, s_crop, crop);
ret = client_g_rect(sd, cam_rect);
if (ret < 0)
return ret;
/*
* Now cam_crop contains the current camera input rectangle, and it must
* be within camera cropcap bounds
*/
if (!memcmp(rect, cam_rect, sizeof(*rect))) {
/* Even if camera S_CROP failed, but camera rectangle matches */
dev_dbg(dev, "Camera S_CROP successful for %dx%d@%d:%d\n",
rect->width, rect->height, rect->left, rect->top);
cam->rect = *cam_rect;
return 0;
}
/* Try to fix cropping, that camera hasn't managed to set */
dev_geo(dev, "Fix camera S_CROP for %dx%d@%d:%d to %dx%d@%d:%d\n",
cam_rect->width, cam_rect->height,
cam_rect->left, cam_rect->top,
rect->width, rect->height, rect->left, rect->top);
/* We need sensor maximum rectangle */
ret = v4l2_subdev_call(sd, video, cropcap, &cap);
if (ret < 0)
return ret;
/* Put user requested rectangle within sensor bounds */
soc_camera_limit_side(&rect->left, &rect->width, cap.bounds.left, 2,
cap.bounds.width);
soc_camera_limit_side(&rect->top, &rect->height, cap.bounds.top, 4,
cap.bounds.height);
/*
* Popular special case - some cameras can only handle fixed sizes like
* QVGA, VGA,... Take care to avoid infinite loop.
*/
width = max(cam_rect->width, 2);
height = max(cam_rect->height, 2);
/*
* Loop as long as sensor is not covering the requested rectangle and
* is still within its bounds
*/
while (!ret && (is_smaller(cam_rect, rect) ||
is_inside(cam_rect, rect)) &&
(cap.bounds.width > width || cap.bounds.height > height)) {
width *= 2;
height *= 2;
cam_rect->width = width;
cam_rect->height = height;
/*
* We do not know what capabilities the camera has to set up
* left and top borders. We could try to be smarter in iterating
* them, e.g., if camera current left is to the right of the
* target left, set it to the middle point between the current
* left and minimum left. But that would add too much
* complexity: we would have to iterate each border separately.
* Instead we just drop to the left and top bounds.
*/
if (cam_rect->left > rect->left)
cam_rect->left = cap.bounds.left;
if (cam_rect->left + cam_rect->width < rect->left + rect->width)
cam_rect->width = rect->left + rect->width -
cam_rect->left;
if (cam_rect->top > rect->top)
cam_rect->top = cap.bounds.top;
if (cam_rect->top + cam_rect->height < rect->top + rect->height)
cam_rect->height = rect->top + rect->height -
cam_rect->top;
v4l2_subdev_call(sd, video, s_crop, cam_crop);
ret = client_g_rect(sd, cam_rect);
dev_geo(dev, "Camera S_CROP %d for %dx%d@%d:%d\n", ret,
cam_rect->width, cam_rect->height,
cam_rect->left, cam_rect->top);
}
/* S_CROP must not modify the rectangle */
if (is_smaller(cam_rect, rect) || is_inside(cam_rect, rect)) {
/*
* The camera failed to configure a suitable cropping,
* we cannot use the current rectangle, set to max
*/
*cam_rect = cap.bounds;
v4l2_subdev_call(sd, video, s_crop, cam_crop);
ret = client_g_rect(sd, cam_rect);
dev_geo(dev, "Camera S_CROP %d for max %dx%d@%d:%d\n", ret,
cam_rect->width, cam_rect->height,
cam_rect->left, cam_rect->top);
}
if (!ret) {
cam->rect = *cam_rect;
update_subrect(cam);
}
return ret;
}
/* Iterative s_mbus_fmt, also updates cached client crop on success */
static int client_s_fmt(struct soc_camera_device *icd,
struct v4l2_mbus_framefmt *mf, bool ceu_can_scale)
{
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct device *dev = icd->parent;
unsigned int width = mf->width, height = mf->height, tmp_w, tmp_h;
unsigned int max_width, max_height;
struct v4l2_cropcap cap;
bool ceu_1to1;
int ret;
ret = v4l2_device_call_until_err(sd->v4l2_dev,
soc_camera_grp_id(icd), video,
s_mbus_fmt, mf);
if (ret < 0)
return ret;
dev_geo(dev, "camera scaled to %ux%u\n", mf->width, mf->height);
if (width == mf->width && height == mf->height) {
/* Perfect! The client has done it all. */
ceu_1to1 = true;
goto update_cache;
}
ceu_1to1 = false;
if (!ceu_can_scale)
goto update_cache;
cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
ret = v4l2_subdev_call(sd, video, cropcap, &cap);
if (ret < 0)
return ret;
max_width = min(cap.bounds.width, 2560);
max_height = min(cap.bounds.height, 1920);
/* Camera set a format, but geometry is not precise, try to improve */
tmp_w = mf->width;
tmp_h = mf->height;
/* width <= max_width && height <= max_height - guaranteed by try_fmt */
while ((width > tmp_w || height > tmp_h) &&
tmp_w < max_width && tmp_h < max_height) {
tmp_w = min(2 * tmp_w, max_width);
tmp_h = min(2 * tmp_h, max_height);
mf->width = tmp_w;
mf->height = tmp_h;
ret = v4l2_device_call_until_err(sd->v4l2_dev,
soc_camera_grp_id(icd), video,
s_mbus_fmt, mf);
dev_geo(dev, "Camera scaled to %ux%u\n",
mf->width, mf->height);
if (ret < 0) {
/* This shouldn't happen */
dev_err(dev, "Client failed to set format: %d\n", ret);
return ret;
}
}
update_cache:
/* Update cache */
ret = client_g_rect(sd, &cam->rect);
if (ret < 0)
return ret;
if (ceu_1to1)
cam->subrect = cam->rect;
else
update_subrect(cam);
return 0;
}
/**
* @width - on output: user width, mapped back to input
* @height - on output: user height, mapped back to input
* @mf - in- / output camera output window
*/
static int client_scale(struct soc_camera_device *icd,
struct v4l2_mbus_framefmt *mf,
unsigned int *width, unsigned int *height,
bool ceu_can_scale)
{
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct device *dev = icd->parent;
struct v4l2_mbus_framefmt mf_tmp = *mf;
unsigned int scale_h, scale_v;
int ret;
/*
* 5. Apply iterative camera S_FMT for camera user window (also updates
* client crop cache and the imaginary sub-rectangle).
*/
ret = client_s_fmt(icd, &mf_tmp, ceu_can_scale);
if (ret < 0)
return ret;
dev_geo(dev, "5: camera scaled to %ux%u\n",
mf_tmp.width, mf_tmp.height);
/* 6. Retrieve camera output window (g_fmt) */
/* unneeded - it is already in "mf_tmp" */
/* 7. Calculate new client scales. */
scale_h = calc_generic_scale(cam->rect.width, mf_tmp.width);
scale_v = calc_generic_scale(cam->rect.height, mf_tmp.height);
mf->width = mf_tmp.width;
mf->height = mf_tmp.height;
mf->colorspace = mf_tmp.colorspace;
/*
* 8. Calculate new CEU crop - apply camera scales to previously
* updated "effective" crop.
*/
*width = scale_down(cam->subrect.width, scale_h);
*height = scale_down(cam->subrect.height, scale_v);
dev_geo(dev, "8: new client sub-window %ux%u\n", *width, *height);
return 0;
}
/*
* CEU can scale and crop, but we don't want to waste bandwidth and kill the
* framerate by always requesting the maximum image from the client. See
* Documentation/video4linux/sh_mobile_ceu_camera.txt for a description of
* scaling and cropping algorithms and for the meaning of referenced here steps.
*/
static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
struct v4l2_crop *a)
{
struct v4l2_rect *rect = &a->c;
struct device *dev = icd->parent;
struct soc_camera_host *ici = to_soc_camera_host(dev);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct v4l2_crop cam_crop;
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct v4l2_rect *cam_rect = &cam_crop.c;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct v4l2_mbus_framefmt mf;
unsigned int scale_cam_h, scale_cam_v, scale_ceu_h, scale_ceu_v,
out_width, out_height;
int interm_width, interm_height;
u32 capsr, cflcr;
int ret;
dev_geo(dev, "S_CROP(%ux%u@%u:%u)\n", rect->width, rect->height,
rect->left, rect->top);
/* During camera cropping its output window can change too, stop CEU */
capsr = capture_save_reset(pcdev);
dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
/*
* 1. - 2. Apply iterative camera S_CROP for new input window, read back
* actual camera rectangle.
*/
ret = client_s_crop(icd, a, &cam_crop);
if (ret < 0)
return ret;
dev_geo(dev, "1-2: camera cropped to %ux%u@%u:%u\n",
cam_rect->width, cam_rect->height,
cam_rect->left, cam_rect->top);
/* On success cam_crop contains current camera crop */
/* 3. Retrieve camera output window */
ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
if (ret < 0)
return ret;
if (mf.width > 2560 || mf.height > 1920)
return -EINVAL;
/* 4. Calculate camera scales */
scale_cam_h = calc_generic_scale(cam_rect->width, mf.width);
scale_cam_v = calc_generic_scale(cam_rect->height, mf.height);
/* Calculate intermediate window */
interm_width = scale_down(rect->width, scale_cam_h);
interm_height = scale_down(rect->height, scale_cam_v);
if (interm_width < icd->user_width) {
u32 new_scale_h;
new_scale_h = calc_generic_scale(rect->width, icd->user_width);
mf.width = scale_down(cam_rect->width, new_scale_h);
}
if (interm_height < icd->user_height) {
u32 new_scale_v;
new_scale_v = calc_generic_scale(rect->height, icd->user_height);
mf.height = scale_down(cam_rect->height, new_scale_v);
}
if (interm_width < icd->user_width || interm_height < icd->user_height) {
ret = v4l2_device_call_until_err(sd->v4l2_dev,
soc_camera_grp_id(icd), video,
s_mbus_fmt, &mf);
if (ret < 0)
return ret;
dev_geo(dev, "New camera output %ux%u\n", mf.width, mf.height);
scale_cam_h = calc_generic_scale(cam_rect->width, mf.width);
scale_cam_v = calc_generic_scale(cam_rect->height, mf.height);
interm_width = scale_down(rect->width, scale_cam_h);
interm_height = scale_down(rect->height, scale_cam_v);
}
/* Cache camera output window */
cam->width = mf.width;
cam->height = mf.height;
if (pcdev->image_mode) {
out_width = min(interm_width, icd->user_width);
out_height = min(interm_height, icd->user_height);
} else {
out_width = interm_width;
out_height = interm_height;
}
/*
* 5. Calculate CEU scales from camera scales from results of (5) and
* the user window
*/
scale_ceu_h = calc_scale(interm_width, &out_width);
scale_ceu_v = calc_scale(interm_height, &out_height);
dev_geo(dev, "5: CEU scales %u:%u\n", scale_ceu_h, scale_ceu_v);
/* Apply CEU scales. */
cflcr = scale_ceu_h | (scale_ceu_v << 16);
if (cflcr != pcdev->cflcr) {
pcdev->cflcr = cflcr;
ceu_write(pcdev, CFLCR, cflcr);
}
icd->user_width = out_width & ~3;
icd->user_height = out_height & ~3;
/* Offsets are applied at the CEU scaling filter input */
cam->ceu_left = scale_down(rect->left - cam_rect->left, scale_cam_h) & ~1;
cam->ceu_top = scale_down(rect->top - cam_rect->top, scale_cam_v) & ~1;
/* 6. Use CEU cropping to crop to the new window. */
sh_mobile_ceu_set_rect(icd);
cam->subrect = *rect;
dev_geo(dev, "6: CEU cropped to %ux%u@%u:%u\n",
icd->user_width, icd->user_height,
cam->ceu_left, cam->ceu_top);
/* Restore capture. The CE bit can be cleared by the hardware */
if (pcdev->active)
capsr |= 1;
capture_restore(pcdev, capsr);
/* Even if only camera cropping succeeded */
return ret;
}
static int sh_mobile_ceu_get_crop(struct soc_camera_device *icd,
struct v4l2_crop *a)
{
struct sh_mobile_ceu_cam *cam = icd->host_priv;
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
a->c = cam->subrect;
return 0;
}
/*
* Calculate real client output window by applying new scales to the current
* client crop. New scales are calculated from the requested output format and
* CEU crop, mapped backed onto the client input (subrect).
*/
static void calculate_client_output(struct soc_camera_device *icd,
const struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf)
{
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct device *dev = icd->parent;
struct v4l2_rect *cam_subrect = &cam->subrect;
unsigned int scale_v, scale_h;
if (cam_subrect->width == cam->rect.width &&
cam_subrect->height == cam->rect.height) {
/* No sub-cropping */
mf->width = pix->width;
mf->height = pix->height;
return;
}
/* 1.-2. Current camera scales and subwin - cached. */
dev_geo(dev, "2: subwin %ux%u@%u:%u\n",
cam_subrect->width, cam_subrect->height,
cam_subrect->left, cam_subrect->top);
/*
* 3. Calculate new combined scales from input sub-window to requested
* user window.
*/
/*
* TODO: CEU cannot scale images larger than VGA to smaller than SubQCIF
* (128x96) or larger than VGA
*/
scale_h = calc_generic_scale(cam_subrect->width, pix->width);
scale_v = calc_generic_scale(cam_subrect->height, pix->height);
dev_geo(dev, "3: scales %u:%u\n", scale_h, scale_v);
/*
* 4. Calculate desired client output window by applying combined scales
* to client (real) input window.
*/
mf->width = scale_down(cam->rect.width, scale_h);
mf->height = scale_down(cam->rect.height, scale_v);
}
/* Similar to set_crop multistage iterative algorithm */
static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
struct device *dev = icd->parent;
struct soc_camera_host *ici = to_soc_camera_host(dev);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct v4l2_pix_format *pix = &f->fmt.pix;
struct v4l2_mbus_framefmt mf;
__u32 pixfmt = pix->pixelformat;
const struct soc_camera_format_xlate *xlate;
/* Keep Compiler Happy */
unsigned int ceu_sub_width = 0, ceu_sub_height = 0;
u16 scale_v, scale_h;
int ret;
bool image_mode;
enum v4l2_field field;
switch (pix->field) {
default:
pix->field = V4L2_FIELD_NONE;
/* fall-through */
case V4L2_FIELD_INTERLACED_TB:
case V4L2_FIELD_INTERLACED_BT:
case V4L2_FIELD_NONE:
field = pix->field;
break;
case V4L2_FIELD_INTERLACED:
field = V4L2_FIELD_INTERLACED_TB;
break;
}
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
if (!xlate) {
dev_warn(dev, "Format %x not found\n", pixfmt);
return -EINVAL;
}
/* 1.-4. Calculate desired client output geometry */
calculate_client_output(icd, pix, &mf);
mf.field = pix->field;
mf.colorspace = pix->colorspace;
mf.code = xlate->code;
switch (pixfmt) {
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV21:
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
image_mode = true;
break;
default:
image_mode = false;
}
dev_geo(dev, "S_FMT(pix=0x%x, fld 0x%x, code 0x%x, %ux%u)\n", pixfmt, mf.field, mf.code,
pix->width, pix->height);
dev_geo(dev, "4: request camera output %ux%u\n", mf.width, mf.height);
/* 5. - 9. */
ret = client_scale(icd, &mf, &ceu_sub_width, &ceu_sub_height,
image_mode && V4L2_FIELD_NONE == field);
dev_geo(dev, "5-9: client scale return %d\n", ret);
/* Done with the camera. Now see if we can improve the result */
dev_geo(dev, "fmt %ux%u, requested %ux%u\n",
mf.width, mf.height, pix->width, pix->height);
if (ret < 0)
return ret;
if (mf.code != xlate->code)
return -EINVAL;
/* 9. Prepare CEU crop */
cam->width = mf.width;
cam->height = mf.height;
/* 10. Use CEU scaling to scale to the requested user window. */
/* We cannot scale up */
if (pix->width > ceu_sub_width)
ceu_sub_width = pix->width;
if (pix->height > ceu_sub_height)
ceu_sub_height = pix->height;
pix->colorspace = mf.colorspace;
if (image_mode) {
/* Scale pix->{width x height} down to width x height */
scale_h = calc_scale(ceu_sub_width, &pix->width);
scale_v = calc_scale(ceu_sub_height, &pix->height);
} else {
pix->width = ceu_sub_width;
pix->height = ceu_sub_height;
scale_h = 0;
scale_v = 0;
}
pcdev->cflcr = scale_h | (scale_v << 16);
/*
* We have calculated CFLCR, the actual configuration will be performed
* in sh_mobile_ceu_set_bus_param()
*/
dev_geo(dev, "10: W: %u : 0x%x = %u, H: %u : 0x%x = %u\n",
ceu_sub_width, scale_h, pix->width,
ceu_sub_height, scale_v, pix->height);
cam->code = xlate->code;
icd->current_fmt = xlate;
pcdev->field = field;
pcdev->image_mode = image_mode;
/* CFSZR requirement */
pix->width &= ~3;
pix->height &= ~3;
return 0;
}
static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
const struct soc_camera_format_xlate *xlate;
struct v4l2_pix_format *pix = &f->fmt.pix;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct v4l2_mbus_framefmt mf;
__u32 pixfmt = pix->pixelformat;
int width, height;
int ret;
dev_geo(icd->parent, "TRY_FMT(pix=0x%x, %ux%u)\n",
pixfmt, pix->width, pix->height);
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
if (!xlate) {
dev_warn(icd->parent, "Format %x not found\n", pixfmt);
return -EINVAL;
}
/* FIXME: calculate using depth and bus width */
/* CFSZR requires height and width to be 4-pixel aligned */
v4l_bound_align_image(&pix->width, 2, 2560, 2,
&pix->height, 4, 1920, 2, 0);
width = pix->width;
height = pix->height;
/* limit to sensor capabilities */
mf.width = pix->width;
mf.height = pix->height;
mf.field = pix->field;
mf.code = xlate->code;
mf.colorspace = pix->colorspace;
ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd),
video, try_mbus_fmt, &mf);
if (ret < 0)
return ret;
pix->width = mf.width;
pix->height = mf.height;
pix->field = mf.field;
pix->colorspace = mf.colorspace;
switch (pixfmt) {
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV21:
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
/* FIXME: check against rect_max after converting soc-camera */
/* We can scale precisely, need a bigger image from camera */
if (pix->width < width || pix->height < height) {
/*
* We presume, the sensor behaves sanely, i.e., if
* requested a bigger rectangle, it will not return a
* smaller one.
*/
mf.width = 2560;
mf.height = 1920;
ret = v4l2_device_call_until_err(sd->v4l2_dev,
soc_camera_grp_id(icd), video,
try_mbus_fmt, &mf);
if (ret < 0) {
/* Shouldn't actually happen... */
dev_err(icd->parent,
"FIXME: client try_fmt() = %d\n", ret);
return ret;
}
}
/* We will scale exactly */
if (mf.width > width)
pix->width = width;
if (mf.height > height)
pix->height = height;
}
pix->width &= ~3;
pix->height &= ~3;
dev_geo(icd->parent, "%s(): return %d, fmt 0x%x, %ux%u\n",
__func__, ret, pix->pixelformat, pix->width, pix->height);
return ret;
}
static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd,
struct v4l2_crop *a)
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
u32 out_width = icd->user_width, out_height = icd->user_height;
int ret;
/* Freeze queue */
pcdev->frozen = 1;
/* Wait for frame */
ret = wait_for_completion_interruptible(&pcdev->complete);
/* Stop the client */
ret = v4l2_subdev_call(sd, video, s_stream, 0);
if (ret < 0)
dev_warn(icd->parent,
"Client failed to stop the stream: %d\n", ret);
else
/* Do the crop, if it fails, there's nothing more we can do */
sh_mobile_ceu_set_crop(icd, a);
dev_geo(icd->parent, "Output after crop: %ux%u\n", icd->user_width, icd->user_height);
if (icd->user_width != out_width || icd->user_height != out_height) {
struct v4l2_format f = {
.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
.fmt.pix = {
.width = out_width,
.height = out_height,
.pixelformat = icd->current_fmt->host_fmt->fourcc,
.field = pcdev->field,
.colorspace = icd->colorspace,
},
};
ret = sh_mobile_ceu_set_fmt(icd, &f);
if (!ret && (out_width != f.fmt.pix.width ||
out_height != f.fmt.pix.height))
ret = -EINVAL;
if (!ret) {
icd->user_width = out_width & ~3;
icd->user_height = out_height & ~3;
ret = sh_mobile_ceu_set_bus_param(icd);
}
}
/* Thaw the queue */
pcdev->frozen = 0;
spin_lock_irq(&pcdev->lock);
sh_mobile_ceu_capture(pcdev);
spin_unlock_irq(&pcdev->lock);
/* Start the client */
ret = v4l2_subdev_call(sd, video, s_stream, 1);
return ret;
}
static unsigned int sh_mobile_ceu_poll(struct file *file, poll_table *pt)
{
struct soc_camera_device *icd = file->private_data;
return vb2_poll(&icd->vb2_vidq, file, pt);
}
static int sh_mobile_ceu_querycap(struct soc_camera_host *ici,
struct v4l2_capability *cap)
{
strlcpy(cap->card, "SuperH_Mobile_CEU", sizeof(cap->card));
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
return 0;
}
static int sh_mobile_ceu_init_videobuf(struct vb2_queue *q,
struct soc_camera_device *icd)
{
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
q->io_modes = VB2_MMAP | VB2_USERPTR;
q->drv_priv = icd;
q->ops = &sh_mobile_ceu_videobuf_ops;
q->mem_ops = &vb2_dma_contig_memops;
q->buf_struct_size = sizeof(struct sh_mobile_ceu_buffer);
return vb2_queue_init(q);
}
static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
.owner = THIS_MODULE,
.add = sh_mobile_ceu_add_device,
.remove = sh_mobile_ceu_remove_device,
.get_formats = sh_mobile_ceu_get_formats,
.put_formats = sh_mobile_ceu_put_formats,
.get_crop = sh_mobile_ceu_get_crop,
.set_crop = sh_mobile_ceu_set_crop,
.set_livecrop = sh_mobile_ceu_set_livecrop,
.set_fmt = sh_mobile_ceu_set_fmt,
.try_fmt = sh_mobile_ceu_try_fmt,
.poll = sh_mobile_ceu_poll,
.querycap = sh_mobile_ceu_querycap,
.set_bus_param = sh_mobile_ceu_set_bus_param,
.init_videobuf2 = sh_mobile_ceu_init_videobuf,
};
struct bus_wait {
struct notifier_block notifier;
struct completion completion;
struct device *dev;
};
static int bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
struct bus_wait *wait = container_of(nb, struct bus_wait, notifier);
if (wait->dev != dev)
return NOTIFY_DONE;
switch (action) {
case BUS_NOTIFY_UNBOUND_DRIVER:
/* Protect from module unloading */
wait_for_completion(&wait->completion);
return NOTIFY_OK;
}
return NOTIFY_DONE;
}
static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
{
struct sh_mobile_ceu_dev *pcdev;
struct resource *res;
void __iomem *base;
unsigned int irq;
int err = 0;
struct bus_wait wait = {
.completion = COMPLETION_INITIALIZER_ONSTACK(wait.completion),
.notifier.notifier_call = bus_notify,
};
struct sh_mobile_ceu_companion *csi2;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!res || (int)irq <= 0) {
dev_err(&pdev->dev, "Not enough CEU platform resources.\n");
err = -ENODEV;
goto exit;
}
pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
if (!pcdev) {
dev_err(&pdev->dev, "Could not allocate pcdev\n");
err = -ENOMEM;
goto exit;
}
INIT_LIST_HEAD(&pcdev->capture);
spin_lock_init(&pcdev->lock);
init_completion(&pcdev->complete);
pcdev->pdata = pdev->dev.platform_data;
if (!pcdev->pdata) {
err = -EINVAL;
dev_err(&pdev->dev, "CEU platform data not set.\n");
goto exit_kfree;
}
base = ioremap_nocache(res->start, resource_size(res));
if (!base) {
err = -ENXIO;
dev_err(&pdev->dev, "Unable to ioremap CEU registers.\n");
goto exit_kfree;
}
pcdev->irq = irq;
pcdev->base = base;
pcdev->video_limit = 0; /* only enabled if second resource exists */
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (res) {
err = dma_declare_coherent_memory(&pdev->dev, res->start,
res->start,
resource_size(res),
DMA_MEMORY_MAP |
DMA_MEMORY_EXCLUSIVE);
if (!err) {
dev_err(&pdev->dev, "Unable to declare CEU memory.\n");
err = -ENXIO;
goto exit_iounmap;
}
pcdev->video_limit = resource_size(res);
}
/* request irq */
err = request_irq(pcdev->irq, sh_mobile_ceu_irq, IRQF_DISABLED,
dev_name(&pdev->dev), pcdev);
if (err) {
dev_err(&pdev->dev, "Unable to register CEU interrupt.\n");
goto exit_release_mem;
}
pm_suspend_ignore_children(&pdev->dev, true);
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
pcdev->ici.priv = pcdev;
pcdev->ici.v4l2_dev.dev = &pdev->dev;
pcdev->ici.nr = pdev->id;
pcdev->ici.drv_name = dev_name(&pdev->dev);
pcdev->ici.ops = &sh_mobile_ceu_host_ops;
pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
if (IS_ERR(pcdev->alloc_ctx)) {
err = PTR_ERR(pcdev->alloc_ctx);
goto exit_free_clk;
}
err = soc_camera_host_register(&pcdev->ici);
if (err)
goto exit_free_ctx;
/* CSI2 interfacing */
csi2 = pcdev->pdata->csi2;
if (csi2) {
struct platform_device *csi2_pdev =
platform_device_alloc("sh-mobile-csi2", csi2->id);
struct sh_csi2_pdata *csi2_pdata = csi2->platform_data;
if (!csi2_pdev) {
err = -ENOMEM;
goto exit_host_unregister;
}
pcdev->csi2_pdev = csi2_pdev;
err = platform_device_add_data(csi2_pdev, csi2_pdata, sizeof(*csi2_pdata));
if (err < 0)
goto exit_pdev_put;
csi2_pdata = csi2_pdev->dev.platform_data;
csi2_pdata->v4l2_dev = &pcdev->ici.v4l2_dev;
csi2_pdev->resource = csi2->resource;
csi2_pdev->num_resources = csi2->num_resources;
err = platform_device_add(csi2_pdev);
if (err < 0)
goto exit_pdev_put;
wait.dev = &csi2_pdev->dev;
err = bus_register_notifier(&platform_bus_type, &wait.notifier);
if (err < 0)
goto exit_pdev_unregister;
/*
* From this point the driver module will not unload, until
* we complete the completion.
*/
if (!csi2_pdev->dev.driver) {
complete(&wait.completion);
/* Either too late, or probing failed */
bus_unregister_notifier(&platform_bus_type, &wait.notifier);
err = -ENXIO;
goto exit_pdev_unregister;
}
/*
* The module is still loaded, in the worst case it is hanging
* in device release on our completion. So, _now_ dereferencing
* the "owner" is safe!
*/
err = try_module_get(csi2_pdev->dev.driver->owner);
/* Let notifier complete, if it has been locked */
complete(&wait.completion);
bus_unregister_notifier(&platform_bus_type, &wait.notifier);
if (!err) {
err = -ENODEV;
goto exit_pdev_unregister;
}
}
return 0;
exit_pdev_unregister:
platform_device_del(pcdev->csi2_pdev);
exit_pdev_put:
pcdev->csi2_pdev->resource = NULL;
platform_device_put(pcdev->csi2_pdev);
exit_host_unregister:
soc_camera_host_unregister(&pcdev->ici);
exit_free_ctx:
vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
exit_free_clk:
pm_runtime_disable(&pdev->dev);
free_irq(pcdev->irq, pcdev);
exit_release_mem:
if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
dma_release_declared_memory(&pdev->dev);
exit_iounmap:
iounmap(base);
exit_kfree:
kfree(pcdev);
exit:
return err;
}
static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev)
{
struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
struct sh_mobile_ceu_dev *pcdev = container_of(soc_host,
struct sh_mobile_ceu_dev, ici);
struct platform_device *csi2_pdev = pcdev->csi2_pdev;
soc_camera_host_unregister(soc_host);
pm_runtime_disable(&pdev->dev);
free_irq(pcdev->irq, pcdev);
if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
dma_release_declared_memory(&pdev->dev);
iounmap(pcdev->base);
vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
if (csi2_pdev && csi2_pdev->dev.driver) {
struct module *csi2_drv = csi2_pdev->dev.driver->owner;
platform_device_del(csi2_pdev);
csi2_pdev->resource = NULL;
platform_device_put(csi2_pdev);
module_put(csi2_drv);
}
kfree(pcdev);
return 0;
}
static int sh_mobile_ceu_runtime_nop(struct device *dev)
{
/* Runtime PM callback shared between ->runtime_suspend()
* and ->runtime_resume(). Simply returns success.
*
* This driver re-initializes all registers after
* pm_runtime_get_sync() anyway so there is no need
* to save and restore registers here.
*/
return 0;
}
static const struct dev_pm_ops sh_mobile_ceu_dev_pm_ops = {
.runtime_suspend = sh_mobile_ceu_runtime_nop,
.runtime_resume = sh_mobile_ceu_runtime_nop,
};
static struct platform_driver sh_mobile_ceu_driver = {
.driver = {
.name = "sh_mobile_ceu",
.pm = &sh_mobile_ceu_dev_pm_ops,
},
.probe = sh_mobile_ceu_probe,
.remove = __devexit_p(sh_mobile_ceu_remove),
};
static int __init sh_mobile_ceu_init(void)
{
/* Whatever return code */
request_module("sh_mobile_csi2");
return platform_driver_register(&sh_mobile_ceu_driver);
}
static void __exit sh_mobile_ceu_exit(void)
{
platform_driver_unregister(&sh_mobile_ceu_driver);
}
module_init(sh_mobile_ceu_init);
module_exit(sh_mobile_ceu_exit);
MODULE_DESCRIPTION("SuperH Mobile CEU driver");
MODULE_AUTHOR("Magnus Damm");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.0.6");
MODULE_ALIAS("platform:sh_mobile_ceu");