Google Git
Sign in
gfiber / kernel / windcharger / f4c6ed78b8f8c817d37e4c829fb1427a37509864 / . / arch / sh / boards / mach-se / 7724 / setup.c
blob: 15456a0773bfc598e3e49f97292861cd50eb9c63 [file] [log] [blame]
/*
* linux/arch/sh/boards/se/7724/setup.c
*
* Copyright (C) 2009 Renesas Solutions Corp.
*
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
#include <asm/clock.h>
#include <asm/sh_keysc.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
/*
* SWx 1234 5678
* ------------------------------------
* SW31 : 1001 1100 : default
* SW32 : 0111 1111 : use on board flash
*
* SW41 : abxx xxxx -> a = 0 : Analog monitor
* 1 : Digital monitor
* b = 0 : VGA
* 1 : SVGA
*/
/* Heartbeat */
static struct heartbeat_data heartbeat_data = {
.regsize = 16,
};
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = &heartbeat_data,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
/* LAN91C111 */
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "SMC91C111" ,
.start = 0x1a300300,
.end = 0x1a30030f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ0_SMC,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct platform_device smc91x_eth_device = {
.name = "smc91x",
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
.resource = smc91x_eth_resources,
.dev = {
.platform_data = &smc91x_info,
},
};
/* MTD */
static struct mtd_partition nor_flash_partitions[] = {
{
.name = "uboot",
.offset = 0,
.size = (1 * 1024 * 1024),
.mask_flags = MTD_WRITEABLE, /* Read-only */
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = (2 * 1024 * 1024),
}, {
.name = "free-area",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data nor_flash_data = {
.width = 2,
.parts = nor_flash_partitions,
.nr_parts = ARRAY_SIZE(nor_flash_partitions),
};
static struct resource nor_flash_resources[] = {
[0] = {
.name = "NOR Flash",
.start = 0x00000000,
.end = 0x01ffffff,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device nor_flash_device = {
.name = "physmap-flash",
.resource = nor_flash_resources,
.num_resources = ARRAY_SIZE(nor_flash_resources),
.dev = {
.platform_data = &nor_flash_data,
},
};
/* LCDC */
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.clock_divider = 1,
.lcd_cfg = {
.name = "LB070WV1",
.sync = 0, /* hsync and vsync are active low */
},
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
},
.board_cfg = {
},
}
};
static struct resource lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000,
.end = 0xfe941fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 106,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device lcdc_device = {
.name = "sh_mobile_lcdc_fb",
.num_resources = ARRAY_SIZE(lcdc_resources),
.resource = lcdc_resources,
.dev = {
.platform_data = &lcdc_info,
},
};
/* CEU0 */
static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
};
static struct resource ceu0_resources[] = {
[0] = {
.name = "CEU0",
.start = 0xfe910000,
.end = 0xfe91009f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 52,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* place holder for contiguous memory */
},
};
static struct platform_device ceu0_device = {
.name = "sh_mobile_ceu",
.id = 0, /* "ceu0" clock */
.num_resources = ARRAY_SIZE(ceu0_resources),
.resource = ceu0_resources,
.dev = {
.platform_data = &sh_mobile_ceu0_info,
},
};
/* CEU1 */
static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
};
static struct resource ceu1_resources[] = {
[0] = {
.name = "CEU1",
.start = 0xfe914000,
.end = 0xfe91409f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 63,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* place holder for contiguous memory */
},
};
static struct platform_device ceu1_device = {
.name = "sh_mobile_ceu",
.id = 1, /* "ceu1" clock */
.num_resources = ARRAY_SIZE(ceu1_resources),
.resource = ceu1_resources,
.dev = {
.platform_data = &sh_mobile_ceu1_info,
},
};
/* KEYSC in SoC (Needs SW33-2 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
.scan_timing = 10,
.delay = 50,
.keycodes = {
KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
},
};
static struct resource keysc_resources[] = {
[0] = {
.name = "KEYSC",
.start = 0x044b0000,
.end = 0x044b000f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 79,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device keysc_device = {
.name = "sh_keysc",
.id = 0, /* "keysc0" clock */
.num_resources = ARRAY_SIZE(keysc_resources),
.resource = keysc_resources,
.dev = {
.platform_data = &keysc_info,
},
};
/* SH Eth */
static struct resource sh_eth_resources[] = {
[0] = {
.start = SH_ETH_ADDR,
.end = SH_ETH_ADDR + 0x1FC,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 91,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
struct sh_eth_plat_data sh_eth_plat = {
.phy = 0x1f, /* SMSC LAN8187 */
.edmac_endian = EDMAC_LITTLE_ENDIAN,
};
static struct platform_device sh_eth_device = {
.name = "sh-eth",
.id = 0,
.dev = {
.platform_data = &sh_eth_plat,
},
.num_resources = ARRAY_SIZE(sh_eth_resources),
.resource = sh_eth_resources,
};
static struct r8a66597_platdata sh7724_usb0_host_data = {
};
static struct resource sh7724_usb0_host_resources[] = {
[0] = {
.start = 0xa4d80000,
.end = 0xa4d800ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 65,
.end = 65,
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
static struct platform_device sh7724_usb0_host_device = {
.name = "r8a66597_hcd",
.id = 0,
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
.platform_data = &sh7724_usb0_host_data,
},
.num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
.resource = sh7724_usb0_host_resources,
};
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
&lcdc_device,
&nor_flash_device,
&ceu0_device,
&ceu1_device,
&keysc_device,
&sh_eth_device,
&sh7724_usb0_host_device,
};
#define EEPROM_OP 0xBA206000
#define EEPROM_ADR 0xBA206004
#define EEPROM_DATA 0xBA20600C
#define EEPROM_STAT 0xBA206010
#define EEPROM_STRT 0xBA206014
static int __init sh_eth_is_eeprom_ready(void)
{
int t = 10000;
while (t--) {
if (!ctrl_inw(EEPROM_STAT))
return 1;
cpu_relax();
}
printk(KERN_ERR "ms7724se can not access to eeprom\n");
return 0;
}
static void __init sh_eth_init(void)
{
int i;
u16 mac[3];
/* check EEPROM status */
if (!sh_eth_is_eeprom_ready())
return;
/* read MAC addr from EEPROM */
for (i = 0 ; i < 3 ; i++) {
ctrl_outw(0x0, EEPROM_OP); /* read */
ctrl_outw(i*2, EEPROM_ADR);
ctrl_outw(0x1, EEPROM_STRT);
if (!sh_eth_is_eeprom_ready())
return;
mac[i] = ctrl_inw(EEPROM_DATA);
mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
}
/* reset sh-eth */
ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
/* set MAC addr */
ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
ctrl_outl((mac[2]), SH_ETH_MALR);
}
#define SW4140 0xBA201000
#define FPGA_OUT 0xBA200400
#define PORT_HIZA 0xA4050158
#define PORT_MSELCRB 0xA4050182
#define SW41_A 0x0100
#define SW41_B 0x0200
#define SW41_C 0x0400
#define SW41_D 0x0800
#define SW41_E 0x1000
#define SW41_F 0x2000
#define SW41_G 0x4000
#define SW41_H 0x8000
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
/* Reset Release */
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
(1 << 12) | /* USB0 */
(1 << 14)), /* RMII */
FPGA_OUT);
/* turn on USB clocks, use external clock */
ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
/* enable USB0 port */
ctrl_outw(0x0600, 0xa40501d4);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
gpio_request(GPIO_FN_INTC_IRQ2, NULL);
/* enable SCIFA3 */
gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
/* enable LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
gpio_request(GPIO_FN_LCDD22, NULL);
gpio_request(GPIO_FN_LCDD21, NULL);
gpio_request(GPIO_FN_LCDD20, NULL);
gpio_request(GPIO_FN_LCDD19, NULL);
gpio_request(GPIO_FN_LCDD18, NULL);
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDHSYN, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request(GPIO_FN_LCDVSYN, NULL);
gpio_request(GPIO_FN_LCDDON, NULL);
gpio_request(GPIO_FN_LCDVEPWC, NULL);
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
/* enable CEU0 */
gpio_request(GPIO_FN_VIO0_D15, NULL);
gpio_request(GPIO_FN_VIO0_D14, NULL);
gpio_request(GPIO_FN_VIO0_D13, NULL);
gpio_request(GPIO_FN_VIO0_D12, NULL);
gpio_request(GPIO_FN_VIO0_D11, NULL);
gpio_request(GPIO_FN_VIO0_D10, NULL);
gpio_request(GPIO_FN_VIO0_D9, NULL);
gpio_request(GPIO_FN_VIO0_D8, NULL);
gpio_request(GPIO_FN_VIO0_D7, NULL);
gpio_request(GPIO_FN_VIO0_D6, NULL);
gpio_request(GPIO_FN_VIO0_D5, NULL);
gpio_request(GPIO_FN_VIO0_D4, NULL);
gpio_request(GPIO_FN_VIO0_D3, NULL);
gpio_request(GPIO_FN_VIO0_D2, NULL);
gpio_request(GPIO_FN_VIO0_D1, NULL);
gpio_request(GPIO_FN_VIO0_D0, NULL);
gpio_request(GPIO_FN_VIO0_VD, NULL);
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_FLD, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
/* enable CEU1 */
gpio_request(GPIO_FN_VIO1_D7, NULL);
gpio_request(GPIO_FN_VIO1_D6, NULL);
gpio_request(GPIO_FN_VIO1_D5, NULL);
gpio_request(GPIO_FN_VIO1_D4, NULL);
gpio_request(GPIO_FN_VIO1_D3, NULL);
gpio_request(GPIO_FN_VIO1_D2, NULL);
gpio_request(GPIO_FN_VIO1_D1, NULL);
gpio_request(GPIO_FN_VIO1_D0, NULL);
gpio_request(GPIO_FN_VIO1_FLD, NULL);
gpio_request(GPIO_FN_VIO1_HD, NULL);
gpio_request(GPIO_FN_VIO1_VD, NULL);
gpio_request(GPIO_FN_VIO1_CLK, NULL);
platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
gpio_request(GPIO_FN_KEYIN4, NULL);
gpio_request(GPIO_FN_KEYIN3, NULL);
gpio_request(GPIO_FN_KEYIN2, NULL);
gpio_request(GPIO_FN_KEYIN1, NULL);
gpio_request(GPIO_FN_KEYIN0, NULL);
gpio_request(GPIO_FN_KEYOUT3, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
/*
* enable SH-Eth
*
* please remove J33 pin from your board !!
*
* ms7724 board should not use GPIO_FN_LNKSTA pin
* So, This time PTX5 is set to input pin
*/
gpio_request(GPIO_FN_RMII_RXD0, NULL);
gpio_request(GPIO_FN_RMII_RXD1, NULL);
gpio_request(GPIO_FN_RMII_TXD0, NULL);
gpio_request(GPIO_FN_RMII_TXD1, NULL);
gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
gpio_request(GPIO_FN_RMII_TX_EN, NULL);
gpio_request(GPIO_FN_RMII_RX_ER, NULL);
gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
gpio_request(GPIO_FN_MDIO, NULL);
gpio_request(GPIO_FN_MDC, NULL);
gpio_request(GPIO_PTX5, NULL);
gpio_direction_input(GPIO_PTX5);
sh_eth_init();
if (sw & SW41_B) {
/* SVGA */
lcdc_info.ch[0].lcd_cfg.xres = 800;
lcdc_info.ch[0].lcd_cfg.yres = 600;
lcdc_info.ch[0].lcd_cfg.left_margin = 142;
lcdc_info.ch[0].lcd_cfg.right_margin = 52;
lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
} else {
/* VGA */
lcdc_info.ch[0].lcd_cfg.xres = 640;
lcdc_info.ch[0].lcd_cfg.yres = 480;
lcdc_info.ch[0].lcd_cfg.left_margin = 105;
lcdc_info.ch[0].lcd_cfg.right_margin = 50;
lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
}
if (sw & SW41_A) {
/* Digital monitor */
lcdc_info.ch[0].interface_type = RGB18;
lcdc_info.ch[0].flags = 0;
} else {
/* Analog monitor */
lcdc_info.ch[0].interface_type = RGB24;
lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
}
return platform_add_devices(ms7724se_devices,
ARRAY_SIZE(ms7724se_devices));
}
device_initcall(devices_setup);
static struct sh_machine_vector mv_ms7724se __initmv = {
.mv_name = "ms7724se",
.mv_init_irq = init_se7724_IRQ,
.mv_nr_irqs = SE7724_FPGA_IRQ_BASE + SE7724_FPGA_IRQ_NR,
};