| #ifndef ASMARM_DMA_MAPPING_H |
| #define ASMARM_DMA_MAPPING_H |
| |
| #ifdef __KERNEL__ |
| |
| #include <linux/mm_types.h> |
| #include <linux/scatterlist.h> |
| |
| #include <asm-generic/dma-coherent.h> |
| #include <asm/memory.h> |
| |
| /* |
| * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions |
| * used internally by the DMA-mapping API to provide DMA addresses. They |
| * must not be used by drivers. |
| */ |
| #ifndef __arch_page_to_dma |
| |
| #if !defined(CONFIG_HIGHMEM) |
| static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) |
| { |
| return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page)); |
| } |
| #elif defined(__pfn_to_bus) |
| static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) |
| { |
| return (dma_addr_t)__pfn_to_bus(page_to_pfn(page)); |
| } |
| #else |
| #error "this machine class needs to define __arch_page_to_dma to use HIGHMEM" |
| #endif |
| |
| static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) |
| { |
| return (void *)__bus_to_virt(addr); |
| } |
| |
| static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) |
| { |
| return (dma_addr_t)__virt_to_bus((unsigned long)(addr)); |
| } |
| #else |
| static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) |
| { |
| return __arch_page_to_dma(dev, page); |
| } |
| |
| static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) |
| { |
| return __arch_dma_to_virt(dev, addr); |
| } |
| |
| static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) |
| { |
| return __arch_virt_to_dma(dev, addr); |
| } |
| #endif |
| |
| /* |
| * DMA-consistent mapping functions. These allocate/free a region of |
| * uncached, unwrite-buffered mapped memory space for use with DMA |
| * devices. This is the "generic" version. The PCI specific version |
| * is in pci.h |
| * |
| * Note: Drivers should NOT use this function directly, as it will break |
| * platforms with CONFIG_DMABOUNCE. |
| * Use the driver DMA support - see dma-mapping.h (dma_sync_*) |
| */ |
| extern void dma_cache_maint(const void *kaddr, size_t size, int rw); |
| extern void dma_cache_maint_page(struct page *page, unsigned long offset, |
| size_t size, int rw); |
| |
| /* |
| * Return whether the given device DMA address mask can be supported |
| * properly. For example, if your device can only drive the low 24-bits |
| * during bus mastering, then you would pass 0x00ffffff as the mask |
| * to this function. |
| * |
| * FIXME: This should really be a platform specific issue - we should |
| * return false if GFP_DMA allocations may not satisfy the supplied 'mask'. |
| */ |
| static inline int dma_supported(struct device *dev, u64 mask) |
| { |
| if (mask < ISA_DMA_THRESHOLD) |
| return 0; |
| return 1; |
| } |
| |
| static inline int dma_set_mask(struct device *dev, u64 dma_mask) |
| { |
| if (!dev->dma_mask || !dma_supported(dev, dma_mask)) |
| return -EIO; |
| |
| *dev->dma_mask = dma_mask; |
| |
| return 0; |
| } |
| |
| static inline int dma_get_cache_alignment(void) |
| { |
| return 32; |
| } |
| |
| static inline int dma_is_consistent(struct device *dev, dma_addr_t handle) |
| { |
| return !!arch_is_coherent(); |
| } |
| |
| /* |
| * DMA errors are defined by all-bits-set in the DMA address. |
| */ |
| static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) |
| { |
| return dma_addr == ~0; |
| } |
| |
| /* |
| * Dummy noncoherent implementation. We don't provide a dma_cache_sync |
| * function so drivers using this API are highlighted with build warnings. |
| */ |
| static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, |
| dma_addr_t *handle, gfp_t gfp) |
| { |
| return NULL; |
| } |
| |
| static inline void dma_free_noncoherent(struct device *dev, size_t size, |
| void *cpu_addr, dma_addr_t handle) |
| { |
| } |
| |
| /** |
| * dma_alloc_coherent - allocate consistent memory for DMA |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @size: required memory size |
| * @handle: bus-specific DMA address |
| * |
| * Allocate some uncached, unbuffered memory for a device for |
| * performing DMA. This function allocates pages, and will |
| * return the CPU-viewed address, and sets @handle to be the |
| * device-viewed address. |
| */ |
| extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); |
| |
| /** |
| * dma_free_coherent - free memory allocated by dma_alloc_coherent |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @size: size of memory originally requested in dma_alloc_coherent |
| * @cpu_addr: CPU-view address returned from dma_alloc_coherent |
| * @handle: device-view address returned from dma_alloc_coherent |
| * |
| * Free (and unmap) a DMA buffer previously allocated by |
| * dma_alloc_coherent(). |
| * |
| * References to memory and mappings associated with cpu_addr/handle |
| * during and after this call executing are illegal. |
| */ |
| extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t); |
| |
| /** |
| * dma_mmap_coherent - map a coherent DMA allocation into user space |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @vma: vm_area_struct describing requested user mapping |
| * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent |
| * @handle: device-view address returned from dma_alloc_coherent |
| * @size: size of memory originally requested in dma_alloc_coherent |
| * |
| * Map a coherent DMA buffer previously allocated by dma_alloc_coherent |
| * into user space. The coherent DMA buffer must not be freed by the |
| * driver until the user space mapping has been released. |
| */ |
| int dma_mmap_coherent(struct device *, struct vm_area_struct *, |
| void *, dma_addr_t, size_t); |
| |
| |
| /** |
| * dma_alloc_writecombine - allocate writecombining memory for DMA |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @size: required memory size |
| * @handle: bus-specific DMA address |
| * |
| * Allocate some uncached, buffered memory for a device for |
| * performing DMA. This function allocates pages, and will |
| * return the CPU-viewed address, and sets @handle to be the |
| * device-viewed address. |
| */ |
| extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *, |
| gfp_t); |
| |
| #define dma_free_writecombine(dev,size,cpu_addr,handle) \ |
| dma_free_coherent(dev,size,cpu_addr,handle) |
| |
| int dma_mmap_writecombine(struct device *, struct vm_area_struct *, |
| void *, dma_addr_t, size_t); |
| |
| |
| #ifdef CONFIG_DMABOUNCE |
| /* |
| * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" |
| * and utilize bounce buffers as needed to work around limited DMA windows. |
| * |
| * On the SA-1111, a bug limits DMA to only certain regions of RAM. |
| * On the IXP425, the PCI inbound window is 64MB (256MB total RAM) |
| * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM) |
| * |
| * The following are helper functions used by the dmabounce subystem |
| * |
| */ |
| |
| /** |
| * dmabounce_register_dev |
| * |
| * @dev: valid struct device pointer |
| * @small_buf_size: size of buffers to use with small buffer pool |
| * @large_buf_size: size of buffers to use with large buffer pool (can be 0) |
| * |
| * This function should be called by low-level platform code to register |
| * a device as requireing DMA buffer bouncing. The function will allocate |
| * appropriate DMA pools for the device. |
| * |
| */ |
| extern int dmabounce_register_dev(struct device *, unsigned long, |
| unsigned long); |
| |
| /** |
| * dmabounce_unregister_dev |
| * |
| * @dev: valid struct device pointer |
| * |
| * This function should be called by low-level platform code when device |
| * that was previously registered with dmabounce_register_dev is removed |
| * from the system. |
| * |
| */ |
| extern void dmabounce_unregister_dev(struct device *); |
| |
| /** |
| * dma_needs_bounce |
| * |
| * @dev: valid struct device pointer |
| * @dma_handle: dma_handle of unbounced buffer |
| * @size: size of region being mapped |
| * |
| * Platforms that utilize the dmabounce mechanism must implement |
| * this function. |
| * |
| * The dmabounce routines call this function whenever a dma-mapping |
| * is requested to determine whether a given buffer needs to be bounced |
| * or not. The function must return 0 if the buffer is OK for |
| * DMA access and 1 if the buffer needs to be bounced. |
| * |
| */ |
| extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); |
| |
| /* |
| * The DMA API, implemented by dmabounce.c. See below for descriptions. |
| */ |
| extern dma_addr_t dma_map_single(struct device *, void *, size_t, |
| enum dma_data_direction); |
| extern dma_addr_t dma_map_page(struct device *, struct page *, |
| unsigned long, size_t, enum dma_data_direction); |
| extern void dma_unmap_single(struct device *, dma_addr_t, size_t, |
| enum dma_data_direction); |
| |
| /* |
| * Private functions |
| */ |
| int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long, |
| size_t, enum dma_data_direction); |
| int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long, |
| size_t, enum dma_data_direction); |
| #else |
| static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr, |
| unsigned long offset, size_t size, enum dma_data_direction dir) |
| { |
| return 1; |
| } |
| |
| static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr, |
| unsigned long offset, size_t size, enum dma_data_direction dir) |
| { |
| return 1; |
| } |
| |
| |
| /** |
| * dma_map_single - map a single buffer for streaming DMA |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @cpu_addr: CPU direct mapped address of buffer |
| * @size: size of buffer to map |
| * @dir: DMA transfer direction |
| * |
| * Ensure that any data held in the cache is appropriately discarded |
| * or written back. |
| * |
| * The device owns this memory once this call has completed. The CPU |
| * can regain ownership by calling dma_unmap_single() or |
| * dma_sync_single_for_cpu(). |
| */ |
| static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, |
| size_t size, enum dma_data_direction dir) |
| { |
| BUG_ON(!valid_dma_direction(dir)); |
| |
| if (!arch_is_coherent()) |
| dma_cache_maint(cpu_addr, size, dir); |
| |
| return virt_to_dma(dev, cpu_addr); |
| } |
| |
| /** |
| * dma_map_page - map a portion of a page for streaming DMA |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @page: page that buffer resides in |
| * @offset: offset into page for start of buffer |
| * @size: size of buffer to map |
| * @dir: DMA transfer direction |
| * |
| * Ensure that any data held in the cache is appropriately discarded |
| * or written back. |
| * |
| * The device owns this memory once this call has completed. The CPU |
| * can regain ownership by calling dma_unmap_page(). |
| */ |
| static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, |
| unsigned long offset, size_t size, enum dma_data_direction dir) |
| { |
| BUG_ON(!valid_dma_direction(dir)); |
| |
| if (!arch_is_coherent()) |
| dma_cache_maint_page(page, offset, size, dir); |
| |
| return page_to_dma(dev, page) + offset; |
| } |
| |
| /** |
| * dma_unmap_single - unmap a single buffer previously mapped |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @handle: DMA address of buffer |
| * @size: size of buffer (same as passed to dma_map_single) |
| * @dir: DMA transfer direction (same as passed to dma_map_single) |
| * |
| * Unmap a single streaming mode DMA translation. The handle and size |
| * must match what was provided in the previous dma_map_single() call. |
| * All other usages are undefined. |
| * |
| * After this call, reads by the CPU to the buffer are guaranteed to see |
| * whatever the device wrote there. |
| */ |
| static inline void dma_unmap_single(struct device *dev, dma_addr_t handle, |
| size_t size, enum dma_data_direction dir) |
| { |
| /* nothing to do */ |
| } |
| #endif /* CONFIG_DMABOUNCE */ |
| |
| /** |
| * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @handle: DMA address of buffer |
| * @size: size of buffer (same as passed to dma_map_page) |
| * @dir: DMA transfer direction (same as passed to dma_map_page) |
| * |
| * Unmap a page streaming mode DMA translation. The handle and size |
| * must match what was provided in the previous dma_map_page() call. |
| * All other usages are undefined. |
| * |
| * After this call, reads by the CPU to the buffer are guaranteed to see |
| * whatever the device wrote there. |
| */ |
| static inline void dma_unmap_page(struct device *dev, dma_addr_t handle, |
| size_t size, enum dma_data_direction dir) |
| { |
| dma_unmap_single(dev, handle, size, dir); |
| } |
| |
| /** |
| * dma_sync_single_range_for_cpu |
| * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices |
| * @handle: DMA address of buffer |
| * @offset: offset of region to start sync |
| * @size: size of region to sync |
| * @dir: DMA transfer direction (same as passed to dma_map_single) |
| * |
| * Make physical memory consistent for a single streaming mode DMA |
| * translation after a transfer. |
| * |
| * If you perform a dma_map_single() but wish to interrogate the |
| * buffer using the cpu, yet do not wish to teardown the PCI dma |
| * mapping, you must call this function before doing so. At the |
| * next point you give the PCI dma address back to the card, you |
| * must first the perform a dma_sync_for_device, and then the |
| * device again owns the buffer. |
| */ |
| static inline void dma_sync_single_range_for_cpu(struct device *dev, |
| dma_addr_t handle, unsigned long offset, size_t size, |
| enum dma_data_direction dir) |
| { |
| BUG_ON(!valid_dma_direction(dir)); |
| |
| dmabounce_sync_for_cpu(dev, handle, offset, size, dir); |
| } |
| |
| static inline void dma_sync_single_range_for_device(struct device *dev, |
| dma_addr_t handle, unsigned long offset, size_t size, |
| enum dma_data_direction dir) |
| { |
| BUG_ON(!valid_dma_direction(dir)); |
| |
| if (!dmabounce_sync_for_device(dev, handle, offset, size, dir)) |
| return; |
| |
| if (!arch_is_coherent()) |
| dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir); |
| } |
| |
| static inline void dma_sync_single_for_cpu(struct device *dev, |
| dma_addr_t handle, size_t size, enum dma_data_direction dir) |
| { |
| dma_sync_single_range_for_cpu(dev, handle, 0, size, dir); |
| } |
| |
| static inline void dma_sync_single_for_device(struct device *dev, |
| dma_addr_t handle, size_t size, enum dma_data_direction dir) |
| { |
| dma_sync_single_range_for_device(dev, handle, 0, size, dir); |
| } |
| |
| /* |
| * The scatter list versions of the above methods. |
| */ |
| extern int dma_map_sg(struct device *, struct scatterlist *, int, |
| enum dma_data_direction); |
| extern void dma_unmap_sg(struct device *, struct scatterlist *, int, |
| enum dma_data_direction); |
| extern void dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int, |
| enum dma_data_direction); |
| extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int, |
| enum dma_data_direction); |
| |
| |
| #endif /* __KERNEL__ */ |
| #endif |