blob: d6965447ca6924f77f97dd0ea33d207b0458f7c8 [file] [log] [blame]
/*
* Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
* Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License as published by the Free Software Foundation;
* either version 2, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
* the implied warranty of MERCHANTABILITY or FITNESS FOR
* A PARTICULAR PURPOSE.See the GNU General Public License
* for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "global.h"
static void tmds_register_write(int index, u8 data);
static int tmds_register_read(int index);
static int tmds_register_read_bytes(int index, u8 *buff, int buff_len);
static int check_reduce_blanking_mode(int mode_index,
int refresh_rate);
static int dvi_get_panel_size_from_DDCv1(void);
static int dvi_get_panel_size_from_DDCv2(void);
static unsigned char dvi_get_panel_info(void);
static int viafb_dvi_query_EDID(void);
static int check_tmds_chip(int device_id_subaddr, int device_id)
{
if (tmds_register_read(device_id_subaddr) == device_id)
return OK;
else
return FAIL;
}
void viafb_init_dvi_size(void)
{
DEBUG_MSG(KERN_INFO "viafb_init_dvi_size()\n");
DEBUG_MSG(KERN_INFO
"viaparinfo->tmds_setting_info->get_dvi_size_method %d\n",
viaparinfo->tmds_setting_info->get_dvi_size_method);
switch (viaparinfo->tmds_setting_info->get_dvi_size_method) {
case GET_DVI_SIZE_BY_SYSTEM_BIOS:
break;
case GET_DVI_SZIE_BY_HW_STRAPPING:
break;
case GET_DVI_SIZE_BY_VGA_BIOS:
default:
dvi_get_panel_info();
break;
}
return;
}
int viafb_tmds_trasmitter_identify(void)
{
unsigned char sr2a = 0, sr1e = 0, sr3e = 0;
/* Turn on ouputting pad */
switch (viaparinfo->chip_info->gfx_chip_name) {
case UNICHROME_K8M890:
/*=* DFP Low Pad on *=*/
sr2a = viafb_read_reg(VIASR, SR2A);
viafb_write_reg_mask(SR2A, VIASR, 0x03, BIT0 + BIT1);
break;
case UNICHROME_P4M900:
case UNICHROME_P4M890:
/* DFP Low Pad on */
sr2a = viafb_read_reg(VIASR, SR2A);
viafb_write_reg_mask(SR2A, VIASR, 0x03, BIT0 + BIT1);
/* DVP0 Pad on */
sr1e = viafb_read_reg(VIASR, SR1E);
viafb_write_reg_mask(SR1E, VIASR, 0xC0, BIT6 + BIT7);
break;
default:
/* DVP0/DVP1 Pad on */
sr1e = viafb_read_reg(VIASR, SR1E);
viafb_write_reg_mask(SR1E, VIASR, 0xF0, BIT4 +
BIT5 + BIT6 + BIT7);
/* SR3E[1]Multi-function selection:
0 = Emulate I2C and DDC bus by GPIO2/3/4. */
sr3e = viafb_read_reg(VIASR, SR3E);
viafb_write_reg_mask(SR3E, VIASR, 0x0, BIT5);
break;
}
/* Check for VT1632: */
viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = VT1632_TMDS;
viaparinfo->chip_info->
tmds_chip_info.tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR;
viaparinfo->chip_info->tmds_chip_info.i2c_port = I2CPORTINDEX;
if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) != FAIL) {
/*
* Currently only support 12bits,dual edge,add 24bits mode later
*/
tmds_register_write(0x08, 0x3b);
DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n");
DEBUG_MSG(KERN_INFO "\n %2d",
viaparinfo->chip_info->tmds_chip_info.tmds_chip_name);
DEBUG_MSG(KERN_INFO "\n %2d",
viaparinfo->chip_info->tmds_chip_info.i2c_port);
return OK;
} else {
viaparinfo->chip_info->tmds_chip_info.i2c_port = GPIOPORTINDEX;
if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID)
!= FAIL) {
tmds_register_write(0x08, 0x3b);
DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n");
DEBUG_MSG(KERN_INFO "\n %2d",
viaparinfo->chip_info->
tmds_chip_info.tmds_chip_name);
DEBUG_MSG(KERN_INFO "\n %2d",
viaparinfo->chip_info->
tmds_chip_info.i2c_port);
return OK;
}
}
viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = INTEGRATED_TMDS;
if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CX700) &&
((viafb_display_hardware_layout == HW_LAYOUT_DVI_ONLY) ||
(viafb_display_hardware_layout == HW_LAYOUT_LCD_DVI))) {
DEBUG_MSG(KERN_INFO "\n Integrated TMDS ! \n");
return OK;
}
switch (viaparinfo->chip_info->gfx_chip_name) {
case UNICHROME_K8M890:
viafb_write_reg(SR2A, VIASR, sr2a);
break;
case UNICHROME_P4M900:
case UNICHROME_P4M890:
viafb_write_reg(SR2A, VIASR, sr2a);
viafb_write_reg(SR1E, VIASR, sr1e);
break;
default:
viafb_write_reg(SR1E, VIASR, sr1e);
viafb_write_reg(SR3E, VIASR, sr3e);
break;
}
viaparinfo->chip_info->
tmds_chip_info.tmds_chip_name = NON_TMDS_TRANSMITTER;
viaparinfo->chip_info->tmds_chip_info.
tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR;
return FAIL;
}
static void tmds_register_write(int index, u8 data)
{
viaparinfo->i2c_stuff.i2c_port =
viaparinfo->chip_info->tmds_chip_info.i2c_port;
viafb_i2c_writebyte(viaparinfo->chip_info->tmds_chip_info.
tmds_chip_slave_addr, index,
data);
}
static int tmds_register_read(int index)
{
u8 data;
viaparinfo->i2c_stuff.i2c_port =
viaparinfo->chip_info->tmds_chip_info.i2c_port;
viafb_i2c_readbyte((u8) viaparinfo->chip_info->
tmds_chip_info.tmds_chip_slave_addr,
(u8) index, &data);
return data;
}
static int tmds_register_read_bytes(int index, u8 *buff, int buff_len)
{
viaparinfo->i2c_stuff.i2c_port =
viaparinfo->chip_info->tmds_chip_info.i2c_port;
viafb_i2c_readbytes((u8) viaparinfo->chip_info->tmds_chip_info.
tmds_chip_slave_addr, (u8) index, buff, buff_len);
return 0;
}
static int check_reduce_blanking_mode(int mode_index,
int refresh_rate)
{
if (refresh_rate != 60)
return false;
switch (mode_index) {
/* Following modes have reduce blanking mode. */
case VIA_RES_1360X768:
case VIA_RES_1400X1050:
case VIA_RES_1440X900:
case VIA_RES_1600X900:
case VIA_RES_1680X1050:
case VIA_RES_1920X1080:
case VIA_RES_1920X1200:
break;
default:
DEBUG_MSG(KERN_INFO
"This dvi mode %d have no reduce blanking mode!\n",
mode_index);
return false;
}
return true;
}
/* DVI Set Mode */
void viafb_dvi_set_mode(int video_index, int mode_bpp, int set_iga)
{
struct VideoModeTable *videoMode = NULL;
struct crt_mode_table *pDviTiming;
unsigned long desirePixelClock, maxPixelClock;
int status = 0;
videoMode = viafb_get_modetbl_pointer(video_index);
pDviTiming = videoMode->crtc;
desirePixelClock = pDviTiming->clk / 1000000;
maxPixelClock = (unsigned long)viaparinfo->
tmds_setting_info->max_pixel_clock;
DEBUG_MSG(KERN_INFO "\nDVI_set_mode!!\n");
if ((maxPixelClock != 0) && (desirePixelClock > maxPixelClock)) {
/*Check if reduce-blanking mode is exist */
status =
check_reduce_blanking_mode(video_index,
pDviTiming->refresh_rate);
if (status) {
video_index += 100; /*Use reduce-blanking mode */
videoMode = viafb_get_modetbl_pointer(video_index);
pDviTiming = videoMode->crtc;
DEBUG_MSG(KERN_INFO
"DVI use reduce blanking mode %d!!\n",
video_index);
}
}
viafb_fill_crtc_timing(pDviTiming, video_index, mode_bpp / 8, set_iga);
viafb_set_output_path(DEVICE_DVI, set_iga,
viaparinfo->chip_info->tmds_chip_info.output_interface);
}
/* Sense DVI Connector */
int viafb_dvi_sense(void)
{
u8 RegSR1E = 0, RegSR3E = 0, RegCR6B = 0, RegCR91 = 0,
RegCR93 = 0, RegCR9B = 0, data;
int ret = false;
DEBUG_MSG(KERN_INFO "viafb_dvi_sense!!\n");
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) {
/* DI1 Pad on */
RegSR1E = viafb_read_reg(VIASR, SR1E);
viafb_write_reg(SR1E, VIASR, RegSR1E | 0x30);
/* CR6B[0]VCK Input Selection: 1 = External clock. */
RegCR6B = viafb_read_reg(VIACR, CR6B);
viafb_write_reg(CR6B, VIACR, RegCR6B | 0x08);
/* CR91[4] VDD On [3] Data On [2] VEE On [1] Back Light Off
[0] Software Control Power Sequence */
RegCR91 = viafb_read_reg(VIACR, CR91);
viafb_write_reg(CR91, VIACR, 0x1D);
/* CR93[7] DI1 Data Source Selection: 1 = DSP2.
CR93[5] DI1 Clock Source: 1 = internal.
CR93[4] DI1 Clock Polarity.
CR93[3:1] DI1 Clock Adjust. CR93[0] DI1 enable */
RegCR93 = viafb_read_reg(VIACR, CR93);
viafb_write_reg(CR93, VIACR, 0x01);
} else {
/* DVP0/DVP1 Pad on */
RegSR1E = viafb_read_reg(VIASR, SR1E);
viafb_write_reg(SR1E, VIASR, RegSR1E | 0xF0);
/* SR3E[1]Multi-function selection:
0 = Emulate I2C and DDC bus by GPIO2/3/4. */
RegSR3E = viafb_read_reg(VIASR, SR3E);
viafb_write_reg(SR3E, VIASR, RegSR3E & (~0x20));
/* CR91[4] VDD On [3] Data On [2] VEE On [1] Back Light Off
[0] Software Control Power Sequence */
RegCR91 = viafb_read_reg(VIACR, CR91);
viafb_write_reg(CR91, VIACR, 0x1D);
/*CR9B[4] DVP1 Data Source Selection: 1 = From secondary
display.CR9B[2:0] DVP1 Clock Adjust */
RegCR9B = viafb_read_reg(VIACR, CR9B);
viafb_write_reg(CR9B, VIACR, 0x01);
}
data = (u8) tmds_register_read(0x09);
if (data & 0x04)
ret = true;
if (ret == false) {
if (viafb_dvi_query_EDID())
ret = true;
}
/* Restore status */
viafb_write_reg(SR1E, VIASR, RegSR1E);
viafb_write_reg(CR91, VIACR, RegCR91);
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) {
viafb_write_reg(CR6B, VIACR, RegCR6B);
viafb_write_reg(CR93, VIACR, RegCR93);
} else {
viafb_write_reg(SR3E, VIASR, RegSR3E);
viafb_write_reg(CR9B, VIACR, RegCR9B);
}
return ret;
}
/* Query Flat Panel's EDID Table Version Through DVI Connector */
static int viafb_dvi_query_EDID(void)
{
u8 data0, data1;
int restore;
DEBUG_MSG(KERN_INFO "viafb_dvi_query_EDID!!\n");
restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA0;
data0 = (u8) tmds_register_read(0x00);
data1 = (u8) tmds_register_read(0x01);
if ((data0 == 0) && (data1 == 0xFF)) {
viaparinfo->chip_info->
tmds_chip_info.tmds_chip_slave_addr = restore;
return EDID_VERSION_1; /* Found EDID1 Table */
}
data0 = (u8) tmds_register_read(0x00);
viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
if (data0 == 0x20)
return EDID_VERSION_2; /* Found EDID2 Table */
else
return false;
}
/*
*
* int dvi_get_panel_size_from_DDCv1(void)
*
* - Get Panel Size Using EDID1 Table
*
* Return Type: int
*
*/
static int dvi_get_panel_size_from_DDCv1(void)
{
int i, max_h = 0, max_v = 0, tmp, restore;
unsigned char rData;
unsigned char EDID_DATA[18];
DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv1 \n");
restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA0;
rData = tmds_register_read(0x23);
if (rData & 0x3C)
max_h = 640;
if (rData & 0xC0)
max_h = 720;
if (rData & 0x03)
max_h = 800;
rData = tmds_register_read(0x24);
if (rData & 0xC0)
max_h = 800;
if (rData & 0x1E)
max_h = 1024;
if (rData & 0x01)
max_h = 1280;
for (i = 0x25; i < 0x6D; i++) {
switch (i) {
case 0x26:
case 0x28:
case 0x2A:
case 0x2C:
case 0x2E:
case 0x30:
case 0x32:
case 0x34:
rData = tmds_register_read(i);
if (rData == 1)
break;
/* data = (data + 31) * 8 */
tmp = (rData + 31) << 3;
if (tmp > max_h)
max_h = tmp;
break;
case 0x36:
case 0x48:
case 0x5A:
case 0x6C:
tmds_register_read_bytes(i, EDID_DATA, 10);
if (!(EDID_DATA[0] || EDID_DATA[1])) {
/* The first two byte must be zero. */
if (EDID_DATA[3] == 0xFD) {
/* To get max pixel clock. */
viaparinfo->tmds_setting_info->
max_pixel_clock = EDID_DATA[9] * 10;
}
}
break;
default:
break;
}
}
switch (max_h) {
case 640:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_640X480;
break;
case 800:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_800X600;
break;
case 1024:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1024X768;
break;
case 1280:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1280X1024;
break;
case 1400:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1400X1050;
break;
case 1440:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1440X1050;
break;
case 1600:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1600X1200;
break;
case 1920:
if (max_v == 1200) {
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1920X1200;
} else {
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1920X1080;
}
break;
default:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1024X768;
DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d !\
set default panel size.\n", max_h);
break;
}
DEBUG_MSG(KERN_INFO "DVI max pixelclock = %d\n",
viaparinfo->tmds_setting_info->max_pixel_clock);
viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
return viaparinfo->tmds_setting_info->dvi_panel_size;
}
/*
*
* int dvi_get_panel_size_from_DDCv2(void)
*
* - Get Panel Size Using EDID2 Table
*
* Return Type: int
*
*/
static int dvi_get_panel_size_from_DDCv2(void)
{
int HSize = 0, restore;
unsigned char R_Buffer[2];
DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv2 \n");
restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr;
viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA2;
/* Horizontal: 0x76, 0x77 */
tmds_register_read_bytes(0x76, R_Buffer, 2);
HSize = R_Buffer[0];
HSize += R_Buffer[1] << 8;
switch (HSize) {
case 640:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_640X480;
break;
case 800:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_800X600;
break;
case 1024:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1024X768;
break;
case 1280:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1280X1024;
break;
case 1400:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1400X1050;
break;
case 1440:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1440X1050;
break;
case 1600:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1600X1200;
break;
default:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1024X768;
DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d!\
set default panel size.\n", HSize);
break;
}
viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore;
return viaparinfo->tmds_setting_info->dvi_panel_size;
}
/*
*
* unsigned char dvi_get_panel_info(void)
*
* - Get Panel Size
*
* Return Type: unsigned char
*/
static unsigned char dvi_get_panel_info(void)
{
unsigned char dvipanelsize;
DEBUG_MSG(KERN_INFO "dvi_get_panel_info! \n");
viafb_dvi_sense();
switch (viafb_dvi_query_EDID()) {
case 1:
dvi_get_panel_size_from_DDCv1();
break;
case 2:
dvi_get_panel_size_from_DDCv2();
break;
default:
break;
}
DEBUG_MSG(KERN_INFO "dvi panel size is %2d \n",
viaparinfo->tmds_setting_info->dvi_panel_size);
dvipanelsize = (unsigned char)(viaparinfo->
tmds_setting_info->dvi_panel_size);
return dvipanelsize;
}
/* If Disable DVI, turn off pad */
void viafb_dvi_disable(void)
{
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_DVP0)
viafb_write_reg(SR1E, VIASR,
viafb_read_reg(VIASR, SR1E) & (~0xC0));
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_DVP1)
viafb_write_reg(SR1E, VIASR,
viafb_read_reg(VIASR, SR1E) & (~0x30));
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_DFP_HIGH)
viafb_write_reg(SR2A, VIASR,
viafb_read_reg(VIASR, SR2A) & (~0x0C));
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_DFP_LOW)
viafb_write_reg(SR2A, VIASR,
viafb_read_reg(VIASR, SR2A) & (~0x03));
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_TMDS)
/* Turn off TMDS power. */
viafb_write_reg(CRD2, VIACR,
viafb_read_reg(VIACR, CRD2) | 0x08);
}
/* If Enable DVI, turn off pad */
void viafb_dvi_enable(void)
{
u8 data;
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_DVP0) {
viafb_write_reg(SR1E, VIASR,
viafb_read_reg(VIASR, SR1E) | 0xC0);
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
tmds_register_write(0x88, 0x3b);
else
/*clear CR91[5] to direct on display period
in the secondary diplay path */
viafb_write_reg(CR91, VIACR,
viafb_read_reg(VIACR, CR91) & 0xDF);
}
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_DVP1) {
viafb_write_reg(SR1E, VIASR,
viafb_read_reg(VIASR, SR1E) | 0x30);
/*fix dvi cann't be enabled with MB VT5718C4 - Al Zhang */
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) {
tmds_register_write(0x88, 0x3b);
} else {
/*clear CR91[5] to direct on display period
in the secondary diplay path */
viafb_write_reg(CR91, VIACR,
viafb_read_reg(VIACR, CR91) & 0xDF);
}
/*fix DVI cannot enable on EPIA-M board */
if (viafb_platform_epia_dvi == 1) {
viafb_write_reg_mask(CR91, VIACR, 0x1f, 0x1f);
viafb_write_reg_mask(CR88, VIACR, 0x00, BIT6 + BIT0);
if (viafb_bus_width == 24) {
if (viafb_device_lcd_dualedge == 1)
data = 0x3F;
else
data = 0x37;
viafb_i2c_writebyte(viaparinfo->chip_info->
tmds_chip_info.
tmds_chip_slave_addr,
0x08, data);
}
}
}
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_DFP_HIGH) {
viafb_write_reg(SR2A, VIASR,
viafb_read_reg(VIASR, SR2A) | 0x0C);
viafb_write_reg(CR91, VIACR,
viafb_read_reg(VIACR, CR91) & 0xDF);
}
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_DFP_LOW) {
viafb_write_reg(SR2A, VIASR,
viafb_read_reg(VIASR, SR2A) | 0x03);
viafb_write_reg(CR91, VIACR,
viafb_read_reg(VIACR, CR91) & 0xDF);
}
if (viaparinfo->chip_info->
tmds_chip_info.output_interface == INTERFACE_TMDS) {
/* Turn on Display period in the panel path. */
viafb_write_reg_mask(CR91, VIACR, 0, BIT7);
/* Turn on TMDS power. */
viafb_write_reg_mask(CRD2, VIACR, 0, BIT3);
}
}