| /* |
| ************************************************************************* |
| * Ralink Tech Inc. |
| * 5F., No.36, Taiyuan St., Jhubei City, |
| * Hsinchu County 302, |
| * Taiwan, R.O.C. |
| * |
| * (c) Copyright 2002-2007, Ralink Technology, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License as published by * |
| * the Free Software Foundation; either version 2 of the License, or * |
| * (at your option) any later version. * |
| * * |
| * This program is distributed in the hope that it will be useful, * |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of * |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * |
| * GNU General Public License for more details. * |
| * * |
| * You should have received a copy of the GNU General Public License * |
| * along with this program; if not, write to the * |
| * Free Software Foundation, Inc., * |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * |
| * * |
| ************************************************************************* |
| |
| Module Name: |
| rtmp_def.h |
| |
| Abstract: |
| Miniport related definition header |
| |
| Revision History: |
| Who When What |
| -------- ---------- ---------------------------------------------- |
| Paul Lin 08-01-2002 created |
| John Chang 08-05-2003 add definition for 11g & other drafts |
| */ |
| #ifndef __RTMP_DEF_H__ |
| #define __RTMP_DEF_H__ |
| |
| #include "oid.h" |
| |
| // |
| // Debug information verbosity: lower values indicate higher urgency |
| // |
| #define RT_DEBUG_OFF 0 |
| #define RT_DEBUG_ERROR 1 |
| #define RT_DEBUG_WARN 2 |
| #define RT_DEBUG_TRACE 3 |
| #define RT_DEBUG_INFO 4 |
| #define RT_DEBUG_LOUD 5 |
| |
| #define NIC_TAG ((ULONG)'0682') |
| #define NIC_DBG_STRING ("**RT28xx**") |
| |
| #define RALINK_2883_VERSION ((UINT32)0x28830300) |
| #define RALINK_2880E_VERSION ((UINT32)0x28720200) |
| #define RALINK_3070_VERSION ((UINT32)0x30700200) |
| |
| // |
| // NDIS version in use by the NIC driver. |
| // The high byte is the major version. The low byte is the minor version. |
| // |
| #ifdef NDIS51_MINIPORT |
| #define NIC_DRIVER_VERSION 0x0501 |
| #else |
| #define NIC_DRIVER_VERSION 0x0500 |
| #endif |
| |
| // |
| // NDIS media type, current is ethernet, change if native wireless supported |
| // |
| #define NIC_MEDIA_TYPE NdisMedium802_3 |
| #define NIC_PCI_HDR_LENGTH 0xe2 |
| #define NIC_MAX_PACKET_SIZE 2304 |
| #define NIC_HEADER_SIZE 14 |
| #define MAX_MAP_REGISTERS_NEEDED 32 |
| #define MIN_MAP_REGISTERS_NEEDED 2 //Todo: should consider fragment issue. |
| |
| // |
| // interface type, we use PCI |
| // |
| #define NIC_INTERFACE_TYPE NdisInterfacePci |
| #define NIC_INTERRUPT_MODE NdisInterruptLevelSensitive |
| |
| // |
| // buffer size passed in NdisMQueryAdapterResources |
| // We should only need three adapter resources (IO, interrupt and memory), |
| // Some devices get extra resources, so have room for 10 resources |
| // UF_SIZE (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR))) |
| |
| |
| #define NIC_RESOURCE_B// |
| // IO space length |
| // |
| #define NIC_MAP_IOSPACE_LENGTH sizeof(CSR_STRUC) |
| |
| #define MAX_RX_PKT_LEN 1520 |
| |
| // |
| // Entry number for each DMA descriptor ring |
| // |
| |
| #ifdef RT2860 |
| #define TX_RING_SIZE 64 //64 |
| #define MGMT_RING_SIZE 128 |
| #define RX_RING_SIZE 128 //64 |
| #define MAX_TX_PROCESS TX_RING_SIZE //8 |
| #define MAX_DMA_DONE_PROCESS TX_RING_SIZE |
| #define MAX_TX_DONE_PROCESS TX_RING_SIZE //8 |
| #define LOCAL_TXBUF_SIZE 2 |
| #endif |
| #ifdef RT2870 |
| #define TX_RING_SIZE 8 // 1 |
| #define PRIO_RING_SIZE 8 |
| #define MGMT_RING_SIZE 32 // PRIO_RING_SIZE |
| #define RX_RING_SIZE 8 |
| #define MAX_TX_PROCESS 4 |
| #define LOCAL_TXBUF_SIZE 2048 |
| #endif // RT2870 // |
| |
| #define MAX_RX_PROCESS 128 //64 //32 |
| #define NUM_OF_LOCAL_TXBUF 2 |
| #define TXD_SIZE 16 |
| #define TXWI_SIZE 16 |
| #define RXD_SIZE 16 |
| #define RXWI_SIZE 16 |
| // TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header |
| #define TX_DMA_1ST_BUFFER_SIZE 96 // only the 1st physical buffer is pre-allocated |
| #define MGMT_DMA_BUFFER_SIZE 1536 //2048 |
| #define RX_BUFFER_AGGRESIZE 3840 //3904 //3968 //4096 //2048 //4096 |
| #define RX_BUFFER_NORMSIZE 3840 //3904 //3968 //4096 //2048 //4096 |
| #define TX_BUFFER_NORMSIZE RX_BUFFER_NORMSIZE |
| #define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size |
| #define MAX_AGGREGATION_SIZE 3840 //3904 //3968 //4096 |
| #define MAX_NUM_OF_TUPLE_CACHE 2 |
| #define MAX_MCAST_LIST_SIZE 32 |
| #define MAX_LEN_OF_VENDOR_DESC 64 |
| //#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ |
| #define MAX_SIZE_OF_MCAST_PSQ 32 |
| |
| #define MAX_RX_PROCESS_CNT (RX_RING_SIZE) |
| |
| |
| #define MAX_PACKETS_IN_QUEUE (512) //(512) // to pass WMM A5-WPAPSK |
| #define MAX_PACKETS_IN_MCAST_PS_QUEUE 32 |
| #define MAX_PACKETS_IN_PS_QUEUE 128 //32 |
| #define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */ |
| |
| #ifdef RT30xx |
| //2008/09/11:KH add to support efuse<-- |
| #define MAX_EEPROM_BIN_FILE_SIZE 1024 |
| //2008/09/11:KH add to support efuse--> |
| #endif |
| |
| // RxFilter |
| #define STANORMAL 0x17f97 |
| #define APNORMAL 0x15f97 |
| // |
| // RTMP_ADAPTER flags |
| // |
| #define fRTMP_ADAPTER_MAP_REGISTER 0x00000001 |
| #define fRTMP_ADAPTER_INTERRUPT_IN_USE 0x00000002 |
| #define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004 |
| #define fRTMP_ADAPTER_SCATTER_GATHER 0x00000008 |
| #define fRTMP_ADAPTER_SEND_PACKET_ERROR 0x00000010 |
| #define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000020 |
| #define fRTMP_ADAPTER_HALT_IN_PROGRESS 0x00000040 |
| #define fRTMP_ADAPTER_RESET_IN_PROGRESS 0x00000080 |
| #define fRTMP_ADAPTER_NIC_NOT_EXIST 0x00000100 |
| #define fRTMP_ADAPTER_TX_RING_ALLOCATED 0x00000200 |
| #define fRTMP_ADAPTER_REMOVE_IN_PROGRESS 0x00000400 |
| #define fRTMP_ADAPTER_MIMORATE_INUSED 0x00000800 |
| #define fRTMP_ADAPTER_RX_RING_ALLOCATED 0x00001000 |
| #define fRTMP_ADAPTER_INTERRUPT_ACTIVE 0x00002000 |
| #define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS 0x00004000 |
| #define fRTMP_ADAPTER_REASSOC_IN_PROGRESS 0x00008000 |
| #define fRTMP_ADAPTER_MEDIA_STATE_PENDING 0x00010000 |
| #define fRTMP_ADAPTER_RADIO_OFF 0x00020000 |
| #define fRTMP_ADAPTER_BULKOUT_RESET 0x00040000 |
| #define fRTMP_ADAPTER_BULKIN_RESET 0x00080000 |
| #define fRTMP_ADAPTER_RDG_ACTIVE 0x00100000 |
| #define fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE 0x00200000 |
| #define fRTMP_ADAPTER_SCAN_2040 0x04000000 |
| #define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000 |
| |
| #define fRTMP_ADAPTER_START_UP 0x10000000 //Devive already initialized and enabled Tx/Rx. |
| #define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000 |
| #define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000 |
| |
| // |
| // STA operation status flags |
| // |
| #define fOP_STATUS_INFRA_ON 0x00000001 |
| #define fOP_STATUS_ADHOC_ON 0x00000002 |
| #define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004 |
| #define fOP_STATUS_SHORT_SLOT_INUSED 0x00000008 |
| #define fOP_STATUS_SHORT_PREAMBLE_INUSED 0x00000010 |
| #define fOP_STATUS_RECEIVE_DTIM 0x00000020 |
| #define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080 |
| #define fOP_STATUS_WMM_INUSED 0x00000100 |
| #define fOP_STATUS_AGGREGATION_INUSED 0x00000200 |
| #define fOP_STATUS_DOZE 0x00000400 // debug purpose |
| #define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 // piggy-back, and aggregation |
| #define fOP_STATUS_APSD_INUSED 0x00001000 |
| #define fOP_STATUS_TX_AMSDU_INUSED 0x00002000 |
| #define fOP_STATUS_MAX_RETRY_ENABLED 0x00004000 |
| #define fOP_STATUS_WAKEUP_NOW 0x00008000 |
| #define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000 |
| |
| #ifdef RT2860 |
| // |
| // RTMP_ADAPTER PSFlags : related to advanced power save. |
| // |
| // Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up |
| #define fRTMP_PS_CAN_GO_SLEEP 0x00000001 |
| // Indicate whether driver has issue a LinkControl command to PCIe L1 |
| #define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002 |
| // Indicate driver should disable kick off hardware to send packets from now. |
| #define fRTMP_PS_DISABLE_TX 0x00000004 |
| // Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me |
| //. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. |
| #define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008 |
| #endif |
| |
| #define CCKSETPROTECT 0x1 |
| #define OFDMSETPROTECT 0x2 |
| #define MM20SETPROTECT 0x4 |
| #define MM40SETPROTECT 0x8 |
| #define GF20SETPROTECT 0x10 |
| #define GR40SETPROTECT 0x20 |
| #define ALLN_SETPROTECT (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT) |
| |
| // |
| // AP's client table operation status flags |
| // |
| #define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame |
| #define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame |
| #define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 // CLIENT support piggy-back |
| #define fCLIENT_STATUS_AMSDU_INUSED 0x00000008 |
| #define fCLIENT_STATUS_SGI20_CAPABLE 0x00000010 |
| #define fCLIENT_STATUS_SGI40_CAPABLE 0x00000020 |
| #define fCLIENT_STATUS_TxSTBC_CAPABLE 0x00000040 |
| #define fCLIENT_STATUS_RxSTBC_CAPABLE 0x00000080 |
| #define fCLIENT_STATUS_HTC_CAPABLE 0x00000100 |
| #define fCLIENT_STATUS_RDG_CAPABLE 0x00000200 |
| #define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE 0x00000400 |
| #define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */ |
| |
| #define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000 |
| // |
| // STA configuration flags |
| // |
| |
| // 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case |
| #define HT_NO_PROTECT 0 |
| #define HT_LEGACY_PROTECT 1 |
| #define HT_40_PROTECT 2 |
| #define HT_2040_PROTECT 3 |
| #define HT_RTSCTS_6M 7 |
| //following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE. |
| #define HT_ATHEROS 8 // rt2860c has problem with atheros chip. we need to turn on RTS/CTS . |
| #define HT_FORCERTSCTS 9 // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary. |
| |
| // |
| // RX Packet Filter control flags. Apply on pAd->PacketFilter |
| // |
| #define fRX_FILTER_ACCEPT_DIRECT NDIS_PACKET_TYPE_DIRECTED |
| #define fRX_FILTER_ACCEPT_MULTICAST NDIS_PACKET_TYPE_MULTICAST |
| #define fRX_FILTER_ACCEPT_BROADCAST NDIS_PACKET_TYPE_BROADCAST |
| #define fRX_FILTER_ACCEPT_ALL_MULTICAST NDIS_PACKET_TYPE_ALL_MULTICAST |
| |
| // |
| // Error code section |
| // |
| // NDIS_ERROR_CODE_ADAPTER_NOT_FOUND |
| #define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L |
| #define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L |
| #define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L |
| |
| // NDIS_ERROR_CODE_ADAPTER_DISABLED |
| #define ERRLOG_BUS_MASTER_DISABLED 0x00000201L |
| |
| // NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION |
| #define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L |
| #define ERRLOG_SET_SECONDARY_FAILED 0x00000302L |
| |
| // NDIS_ERROR_CODE_OUT_OF_RESOURCES |
| #define ERRLOG_OUT_OF_MEMORY 0x00000401L |
| #define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L |
| #define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L |
| #define ERRLOG_OUT_OF_BUFFER_POOL 0x00000404L |
| #define ERRLOG_OUT_OF_NDIS_BUFFER 0x00000405L |
| #define ERRLOG_OUT_OF_PACKET_POOL 0x00000406L |
| #define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L |
| #define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L |
| |
| // NDIS_ERROR_CODE_HARDWARE_FAILURE |
| #define ERRLOG_SELFTEST_FAILED 0x00000501L |
| #define ERRLOG_INITIALIZE_ADAPTER 0x00000502L |
| #define ERRLOG_REMOVE_MINIPORT 0x00000503L |
| |
| // NDIS_ERROR_CODE_RESOURCE_CONFLICT |
| #define ERRLOG_MAP_IO_SPACE 0x00000601L |
| #define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L |
| #define ERRLOG_NO_IO_RESOURCE 0x00000603L |
| #define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L |
| #define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L |
| |
| |
| // WDS definition |
| #define MAX_WDS_ENTRY 4 |
| #define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table |
| |
| #define WDS_DISABLE_MODE 0 |
| #define WDS_RESTRICT_MODE 1 |
| #define WDS_BRIDGE_MODE 2 |
| #define WDS_REPEATER_MODE 3 |
| #define WDS_LAZY_MODE 4 |
| |
| |
| #define MAX_MESH_NUM 0 |
| |
| #define MAX_APCLI_NUM 0 |
| |
| #define MAX_MBSSID_NUM 1 |
| #if defined(RT2860) || defined(RT30xx) |
| #ifdef MBSS_SUPPORT |
| #undef MAX_MBSSID_NUM |
| #define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM) |
| #endif // MBSS_SUPPORT // |
| #endif |
| |
| /* sanity check for apidx */ |
| #define MBSS_MR_APIDX_SANITY_CHECK(apidx) \ |
| { if (apidx > MAX_MBSSID_NUM) { \ |
| printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx); \ |
| apidx = MAIN_MBSSID; } } |
| |
| #define VALID_WCID(_wcid) ((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE ) |
| |
| #define MAIN_MBSSID 0 |
| #define FIRST_MBSSID 1 |
| |
| |
| #define MAX_BEACON_SIZE 512 |
| // If the MAX_MBSSID_NUM is larger than 6, |
| // it shall reserve some WCID space(wcid 222~253) for beacon frames. |
| // - these wcid 238~253 are reserved for beacon#6(ra6). |
| // - these wcid 222~237 are reserved for beacon#7(ra7). |
| #if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8) |
| #define HW_RESERVED_WCID 222 |
| #elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7) |
| #define HW_RESERVED_WCID 238 |
| #else |
| #define HW_RESERVED_WCID 255 |
| #endif |
| |
| // Then dedicate wcid of DFS and Carrier-Sense. |
| #define DFS_CTS_WCID (HW_RESERVED_WCID - 1) |
| #define CS_CTS_WCID (HW_RESERVED_WCID - 2) |
| #define LAST_SPECIFIC_WCID (HW_RESERVED_WCID - 2) |
| |
| // If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211. |
| // If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228. |
| #define MAX_AVAILABLE_CLIENT_WCID (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1) |
| |
| // TX need WCID to find Cipher Key |
| // these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8. |
| #define GET_GroupKey_WCID(__wcid, __bssidx) \ |
| { \ |
| __wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx; \ |
| } |
| |
| #define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM)))) |
| |
| |
| // definition to support multiple BSSID |
| #define BSS0 0 |
| #define BSS1 1 |
| #define BSS2 2 |
| #define BSS3 3 |
| #define BSS4 4 |
| #define BSS5 5 |
| #define BSS6 6 |
| #define BSS7 7 |
| |
| |
| //============================================================ |
| // Length definitions |
| #define PEER_KEY_NO 2 |
| #define MAC_ADDR_LEN 6 |
| #define TIMESTAMP_LEN 8 |
| #define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 |
| #define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA |
| #define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination |
| #define MAX_NUM_OF_11JCHANNELS 20 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination |
| #define MAX_LEN_OF_SSID 32 |
| #define CIPHER_TEXT_LEN 128 |
| #define HASH_TABLE_SIZE 256 |
| #define MAX_VIE_LEN 1024 // New for WPA cipher suite variable IE sizes. |
| #define MAX_SUPPORT_MCS 32 |
| |
| //============================================================ |
| // ASIC WCID Table definition. |
| //============================================================ |
| #define BSSID_WCID 1 // in infra mode, always put bssid with this WCID |
| #define MCAST_WCID 0x0 |
| #define BSS0Mcast_WCID 0x0 |
| #define BSS1Mcast_WCID 0xf8 |
| #define BSS2Mcast_WCID 0xf9 |
| #define BSS3Mcast_WCID 0xfa |
| #define BSS4Mcast_WCID 0xfb |
| #define BSS5Mcast_WCID 0xfc |
| #define BSS6Mcast_WCID 0xfd |
| #define BSS7Mcast_WCID 0xfe |
| #define RESERVED_WCID 0xff |
| |
| #define MAX_NUM_OF_ACL_LIST MAX_NUMBER_OF_ACL |
| |
| #define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211 |
| |
| #if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID |
| #error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!! |
| #endif |
| |
| #define MAX_NUM_OF_WDS_LINK_PERBSSID 3 |
| #define MAX_NUM_OF_WDS_LINK (MAX_NUM_OF_WDS_LINK_PERBSSID*MAX_MBSSID_NUM) |
| #define MAX_NUM_OF_EVENT MAX_NUMBER_OF_EVENT |
| #define WDS_LINK_START_WCID (MAX_LEN_OF_MAC_TABLE-1) |
| |
| #define NUM_OF_TID 8 |
| #define MAX_AID_BA 4 |
| #define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient |
| #define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator |
| #define MAX_LEN_OF_BSS_TABLE 64 |
| #define MAX_REORDERING_MPDU_NUM 512 |
| |
| // key related definitions |
| #define SHARE_KEY_NUM 4 |
| #define MAX_LEN_OF_SHARE_KEY 16 // byte count |
| #define MAX_LEN_OF_PEER_KEY 16 // byte count |
| #define PAIRWISE_KEY_NUM 64 // in MAC ASIC pairwise key table |
| #define GROUP_KEY_NUM 4 |
| #define PMK_LEN 32 |
| #define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table |
| #define PMKID_NO 4 // Number of PMKID saved supported |
| #define MAX_LEN_OF_MLME_BUFFER 2048 |
| |
| // power status related definitions |
| #define PWR_ACTIVE 0 |
| #define PWR_SAVE 1 |
| #define PWR_MMPS 2 //MIMO power save |
| |
| // Auth and Assoc mode related definitions |
| #define AUTH_MODE_OPEN 0x00 |
| #define AUTH_MODE_KEY 0x01 |
| |
| // BSS Type definitions |
| #define BSS_ADHOC 0 // = Ndis802_11IBSS |
| #define BSS_INFRA 1 // = Ndis802_11Infrastructure |
| #define BSS_ANY 2 // = Ndis802_11AutoUnknown |
| #define BSS_MONITOR 3 // = Ndis802_11Monitor |
| |
| |
| // Reason code definitions |
| #define REASON_RESERVED 0 |
| #define REASON_UNSPECIFY 1 |
| #define REASON_NO_LONGER_VALID 2 |
| #define REASON_DEAUTH_STA_LEAVING 3 |
| #define REASON_DISASSOC_INACTIVE 4 |
| #define REASON_DISASSPC_AP_UNABLE 5 |
| #define REASON_CLS2ERR 6 |
| #define REASON_CLS3ERR 7 |
| #define REASON_DISASSOC_STA_LEAVING 8 |
| #define REASON_STA_REQ_ASSOC_NOT_AUTH 9 |
| #define REASON_INVALID_IE 13 |
| #define REASON_MIC_FAILURE 14 |
| #define REASON_4_WAY_TIMEOUT 15 |
| #define REASON_GROUP_KEY_HS_TIMEOUT 16 |
| #define REASON_IE_DIFFERENT 17 |
| #define REASON_MCIPHER_NOT_VALID 18 |
| #define REASON_UCIPHER_NOT_VALID 19 |
| #define REASON_AKMP_NOT_VALID 20 |
| #define REASON_UNSUPPORT_RSNE_VER 21 |
| #define REASON_INVALID_RSNE_CAP 22 |
| #define REASON_8021X_AUTH_FAIL 23 |
| #define REASON_CIPHER_SUITE_REJECTED 24 |
| #define REASON_DECLINED 37 |
| |
| #define REASON_QOS_UNSPECIFY 32 |
| #define REASON_QOS_LACK_BANDWIDTH 33 |
| #define REASON_POOR_CHANNEL_CONDITION 34 |
| #define REASON_QOS_OUTSIDE_TXOP_LIMITION 35 |
| #define REASON_QOS_QSTA_LEAVING_QBSS 36 |
| #define REASON_QOS_UNWANTED_MECHANISM 37 |
| #define REASON_QOS_MECH_SETUP_REQUIRED 38 |
| #define REASON_QOS_REQUEST_TIMEOUT 39 |
| #define REASON_QOS_CIPHER_NOT_SUPPORT 45 |
| |
| // Status code definitions |
| #define MLME_SUCCESS 0 |
| #define MLME_UNSPECIFY_FAIL 1 |
| #define MLME_CANNOT_SUPPORT_CAP 10 |
| #define MLME_REASSOC_DENY_ASSOC_EXIST 11 |
| #define MLME_ASSOC_DENY_OUT_SCOPE 12 |
| #define MLME_ALG_NOT_SUPPORT 13 |
| #define MLME_SEQ_NR_OUT_OF_SEQUENCE 14 |
| #define MLME_REJ_CHALLENGE_FAILURE 15 |
| #define MLME_REJ_TIMEOUT 16 |
| #define MLME_ASSOC_REJ_UNABLE_HANDLE_STA 17 |
| #define MLME_ASSOC_REJ_DATA_RATE 18 |
| |
| #define MLME_ASSOC_REJ_NO_EXT_RATE 22 |
| #define MLME_ASSOC_REJ_NO_EXT_RATE_PBCC 23 |
| #define MLME_ASSOC_REJ_NO_CCK_OFDM 24 |
| |
| #define MLME_QOS_UNSPECIFY 32 |
| #define MLME_REQUEST_DECLINED 37 |
| #define MLME_REQUEST_WITH_INVALID_PARAM 38 |
| #define MLME_DLS_NOT_ALLOW_IN_QBSS 48 |
| #define MLME_DEST_STA_NOT_IN_QBSS 49 |
| #define MLME_DEST_STA_IS_NOT_A_QSTA 50 |
| |
| #define MLME_INVALID_FORMAT 0x51 |
| #define MLME_FAIL_NO_RESOURCE 0x52 |
| #define MLME_STATE_MACHINE_REJECT 0x53 |
| #define MLME_MAC_TABLE_FAIL 0x54 |
| |
| // IE code |
| #define IE_SSID 0 |
| #define IE_SUPP_RATES 1 |
| #define IE_FH_PARM 2 |
| #define IE_DS_PARM 3 |
| #define IE_CF_PARM 4 |
| #define IE_TIM 5 |
| #define IE_IBSS_PARM 6 |
| #define IE_COUNTRY 7 // 802.11d |
| #define IE_802_11D_REQUEST 10 // 802.11d |
| #define IE_QBSS_LOAD 11 // 802.11e d9 |
| #define IE_EDCA_PARAMETER 12 // 802.11e d9 |
| #define IE_TSPEC 13 // 802.11e d9 |
| #define IE_TCLAS 14 // 802.11e d9 |
| #define IE_SCHEDULE 15 // 802.11e d9 |
| #define IE_CHALLENGE_TEXT 16 |
| #define IE_POWER_CONSTRAINT 32 // 802.11h d3.3 |
| #define IE_POWER_CAPABILITY 33 // 802.11h d3.3 |
| #define IE_TPC_REQUEST 34 // 802.11h d3.3 |
| #define IE_TPC_REPORT 35 // 802.11h d3.3 |
| #define IE_SUPP_CHANNELS 36 // 802.11h d3.3 |
| #define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 // 802.11h d3.3 |
| #define IE_MEASUREMENT_REQUEST 38 // 802.11h d3.3 |
| #define IE_MEASUREMENT_REPORT 39 // 802.11h d3.3 |
| #define IE_QUIET 40 // 802.11h d3.3 |
| #define IE_IBSS_DFS 41 // 802.11h d3.3 |
| #define IE_ERP 42 // 802.11g |
| #define IE_TS_DELAY 43 // 802.11e d9 |
| #define IE_TCLAS_PROCESSING 44 // 802.11e d9 |
| #define IE_QOS_CAPABILITY 46 // 802.11e d6 |
| #define IE_HT_CAP 45 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD |
| #define IE_AP_CHANNEL_REPORT 51 // 802.11k d6 |
| #define IE_HT_CAP2 52 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD |
| #define IE_RSN 48 // 802.11i d3.0 |
| #define IE_WPA2 48 // WPA2 |
| #define IE_EXT_SUPP_RATES 50 // 802.11g |
| #define IE_SUPP_REG_CLASS 59 // 802.11y. Supported regulatory classes. |
| #define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 // 802.11n |
| #define IE_ADD_HT 61 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD |
| #define IE_ADD_HT2 53 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD |
| |
| |
| // For 802.11n D3.03 |
| //#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet |
| #define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element |
| #ifdef RT2870 |
| #define IE_WAPI 68 // WAPI information element |
| #endif |
| #define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3 |
| #define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03 |
| #define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03 |
| #define IE_EXT_CAPABILITY 127 // 802.11n D3.03 |
| |
| |
| #define IE_WPA 221 // WPA |
| #define IE_VENDOR_SPECIFIC 221 // Wifi WMM (WME) |
| |
| #define OUI_BROADCOM_HT 51 // |
| #define OUI_BROADCOM_HTADD 52 // |
| #define OUI_PREN_HT_CAP 51 // |
| #define OUI_PREN_ADD_HT 52 // |
| |
| // CCX information |
| #define IE_AIRONET_CKIP 133 // CCX1.0 ID 85H for CKIP |
| #define IE_AP_TX_POWER 150 // CCX 2.0 for AP transmit power |
| #define IE_MEASUREMENT_CAPABILITY 221 // CCX 2.0 |
| #define IE_CCX_V2 221 |
| #define IE_AIRONET_IPADDRESS 149 // CCX ID 95H for IP Address |
| #define IE_AIRONET_CCKMREASSOC 156 // CCX ID 9CH for CCKM Reassociation Request element |
| #define CKIP_NEGOTIATION_LENGTH 30 |
| #define AIRONET_IPADDRESS_LENGTH 10 |
| #define AIRONET_CCKMREASSOC_LENGTH 24 |
| |
| // ======================================================== |
| // MLME state machine definition |
| // ======================================================== |
| |
| // STA MLME state mahcines |
| #define ASSOC_STATE_MACHINE 1 |
| #define AUTH_STATE_MACHINE 2 |
| #define AUTH_RSP_STATE_MACHINE 3 |
| #define SYNC_STATE_MACHINE 4 |
| #define MLME_CNTL_STATE_MACHINE 5 |
| #define WPA_PSK_STATE_MACHINE 6 |
| #define LEAP_STATE_MACHINE 7 |
| #define AIRONET_STATE_MACHINE 8 |
| #define ACTION_STATE_MACHINE 9 |
| |
| // AP MLME state machines |
| #define AP_ASSOC_STATE_MACHINE 11 |
| #define AP_AUTH_STATE_MACHINE 12 |
| #define AP_AUTH_RSP_STATE_MACHINE 13 |
| #define AP_SYNC_STATE_MACHINE 14 |
| #define AP_CNTL_STATE_MACHINE 15 |
| #define AP_WPA_STATE_MACHINE 16 |
| |
| #ifdef RT30xx |
| #define WSC_STATE_MACHINE 17 |
| #define WSC_UPNP_STATE_MACHINE 18 |
| #endif |
| |
| // |
| // STA's CONTROL/CONNECT state machine: states, events, total function # |
| // |
| #define CNTL_IDLE 0 |
| #define CNTL_WAIT_DISASSOC 1 |
| #define CNTL_WAIT_JOIN 2 |
| #define CNTL_WAIT_REASSOC 3 |
| #define CNTL_WAIT_START 4 |
| #define CNTL_WAIT_AUTH 5 |
| #define CNTL_WAIT_ASSOC 6 |
| #define CNTL_WAIT_AUTH2 7 |
| #define CNTL_WAIT_OID_LIST_SCAN 8 |
| #define CNTL_WAIT_OID_DISASSOC 9 |
| #ifdef RT2870 |
| #define CNTL_WAIT_SCAN_FOR_CONNECT 10 |
| #endif // RT2870 // |
| |
| #define MT2_ASSOC_CONF 34 |
| #define MT2_AUTH_CONF 35 |
| #define MT2_DEAUTH_CONF 36 |
| #define MT2_DISASSOC_CONF 37 |
| #define MT2_REASSOC_CONF 38 |
| #define MT2_PWR_MGMT_CONF 39 |
| #define MT2_JOIN_CONF 40 |
| #define MT2_SCAN_CONF 41 |
| #define MT2_START_CONF 42 |
| #define MT2_GET_CONF 43 |
| #define MT2_SET_CONF 44 |
| #define MT2_RESET_CONF 45 |
| #define MT2_MLME_ROAMING_REQ 52 |
| |
| #define CNTL_FUNC_SIZE 1 |
| |
| // |
| // STA's ASSOC state machine: states, events, total function # |
| // |
| #define ASSOC_IDLE 0 |
| #define ASSOC_WAIT_RSP 1 |
| #define REASSOC_WAIT_RSP 2 |
| #define DISASSOC_WAIT_RSP 3 |
| #define MAX_ASSOC_STATE 4 |
| |
| #define ASSOC_MACHINE_BASE 0 |
| #define MT2_MLME_ASSOC_REQ 0 |
| #define MT2_MLME_REASSOC_REQ 1 |
| #define MT2_MLME_DISASSOC_REQ 2 |
| #define MT2_PEER_DISASSOC_REQ 3 |
| #define MT2_PEER_ASSOC_REQ 4 |
| #define MT2_PEER_ASSOC_RSP 5 |
| #define MT2_PEER_REASSOC_REQ 6 |
| #define MT2_PEER_REASSOC_RSP 7 |
| #define MT2_DISASSOC_TIMEOUT 8 |
| #define MT2_ASSOC_TIMEOUT 9 |
| #define MT2_REASSOC_TIMEOUT 10 |
| #define MAX_ASSOC_MSG 11 |
| |
| #define ASSOC_FUNC_SIZE (MAX_ASSOC_STATE * MAX_ASSOC_MSG) |
| |
| // |
| // ACT state machine: states, events, total function # |
| // |
| #define ACT_IDLE 0 |
| #define MAX_ACT_STATE 1 |
| |
| #define ACT_MACHINE_BASE 0 |
| |
| //Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. |
| //Category |
| #define MT2_PEER_SPECTRUM_CATE 0 |
| #define MT2_PEER_QOS_CATE 1 |
| #define MT2_PEER_DLS_CATE 2 |
| #define MT2_PEER_BA_CATE 3 |
| #define MT2_PEER_PUBLIC_CATE 4 |
| #define MT2_PEER_RM_CATE 5 |
| #define MT2_PEER_HT_CATE 7 // 7.4.7 |
| #define MAX_PEER_CATE_MSG 7 |
| #define MT2_MLME_ADD_BA_CATE 8 |
| #define MT2_MLME_ORI_DELBA_CATE 9 |
| #define MT2_MLME_REC_DELBA_CATE 10 |
| #define MT2_MLME_QOS_CATE 11 |
| #define MT2_MLME_DLS_CATE 12 |
| #define MT2_ACT_INVALID 13 |
| #define MAX_ACT_MSG 14 |
| |
| //Category field |
| #define CATEGORY_SPECTRUM 0 |
| #define CATEGORY_QOS 1 |
| #define CATEGORY_DLS 2 |
| #define CATEGORY_BA 3 |
| #define CATEGORY_PUBLIC 4 |
| #define CATEGORY_RM 5 |
| #define CATEGORY_HT 7 |
| |
| |
| // DLS Action frame definition |
| #define ACTION_DLS_REQUEST 0 |
| #define ACTION_DLS_RESPONSE 1 |
| #define ACTION_DLS_TEARDOWN 2 |
| |
| //Spectrum Action field value 802.11h 7.4.1 |
| #define SPEC_MRQ 0 // Request |
| #define SPEC_MRP 1 //Report |
| #define SPEC_TPCRQ 2 |
| #define SPEC_TPCRP 3 |
| #define SPEC_CHANNEL_SWITCH 4 |
| |
| |
| //BA Action field value |
| #define ADDBA_REQ 0 |
| #define ADDBA_RESP 1 |
| #define DELBA 2 |
| |
| //Public's Action field value in Public Category. Some in 802.11y and some in 11n |
| #define ACTION_BSS_2040_COEXIST 0 // 11n |
| #define ACTION_DSE_ENABLEMENT 1 // 11y D9.0 |
| #define ACTION_DSE_DEENABLEMENT 2 // 11y D9.0 |
| #define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 // 11y D9.0 |
| #define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 // 11y D9.0 |
| #define ACTION_DSE_MEASUREMENT_REQ 5 // 11y D9.0 |
| #define ACTION_DSE_MEASUREMENT_REPORT 6 // 11y D9.0 |
| #define ACTION_MEASUREMENT_PILOT_ACTION 7 // 11y D9.0 |
| #define ACTION_DSE_POWER_CONSTRAINT 8 // 11y D9.0 |
| |
| |
| //HT Action field value |
| #define NOTIFY_BW_ACTION 0 |
| #define SMPS_ACTION 1 |
| #define PSMP_ACTION 2 |
| #define SETPCO_ACTION 3 |
| #define MIMO_CHA_MEASURE_ACTION 4 |
| #define MIMO_N_BEACONFORM 5 |
| #define MIMO_BEACONFORM 6 |
| #define ANTENNA_SELECT 7 |
| #define HT_INFO_EXCHANGE 8 |
| |
| #define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG) |
| // |
| // STA's AUTHENTICATION state machine: states, evvents, total function # |
| // |
| #define AUTH_REQ_IDLE 0 |
| #define AUTH_WAIT_SEQ2 1 |
| #define AUTH_WAIT_SEQ4 2 |
| #define MAX_AUTH_STATE 3 |
| |
| #define AUTH_MACHINE_BASE 0 |
| #define MT2_MLME_AUTH_REQ 0 |
| #define MT2_PEER_AUTH_EVEN 1 |
| #define MT2_AUTH_TIMEOUT 2 |
| #define MAX_AUTH_MSG 3 |
| |
| #define AUTH_FUNC_SIZE (MAX_AUTH_STATE * MAX_AUTH_MSG) |
| |
| // |
| // STA's AUTH_RSP state machine: states, events, total function # |
| // |
| #define AUTH_RSP_IDLE 0 |
| #define AUTH_RSP_WAIT_CHAL 1 |
| #define MAX_AUTH_RSP_STATE 2 |
| |
| #define AUTH_RSP_MACHINE_BASE 0 |
| #define MT2_AUTH_CHALLENGE_TIMEOUT 0 |
| #define MT2_PEER_AUTH_ODD 1 |
| #define MT2_PEER_DEAUTH 2 |
| #define MAX_AUTH_RSP_MSG 3 |
| |
| #define AUTH_RSP_FUNC_SIZE (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG) |
| |
| // |
| // STA's SYNC state machine: states, events, total function # |
| // |
| #define SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state |
| #define JOIN_WAIT_BEACON 1 |
| #define SCAN_LISTEN 2 |
| #define MAX_SYNC_STATE 3 |
| |
| #define SYNC_MACHINE_BASE 0 |
| #define MT2_MLME_SCAN_REQ 0 |
| #define MT2_MLME_JOIN_REQ 1 |
| #define MT2_MLME_START_REQ 2 |
| #define MT2_PEER_BEACON 3 |
| #define MT2_PEER_PROBE_RSP 4 |
| #define MT2_PEER_ATIM 5 |
| #define MT2_SCAN_TIMEOUT 6 |
| #define MT2_BEACON_TIMEOUT 7 |
| #define MT2_ATIM_TIMEOUT 8 |
| #define MT2_PEER_PROBE_REQ 9 |
| #define MAX_SYNC_MSG 10 |
| |
| #define SYNC_FUNC_SIZE (MAX_SYNC_STATE * MAX_SYNC_MSG) |
| |
| //Messages for the DLS state machine |
| #define DLS_IDLE 0 |
| #define MAX_DLS_STATE 1 |
| |
| #define DLS_MACHINE_BASE 0 |
| #define MT2_MLME_DLS_REQ 0 |
| #define MT2_PEER_DLS_REQ 1 |
| #define MT2_PEER_DLS_RSP 2 |
| #define MT2_MLME_DLS_TEAR_DOWN 3 |
| #define MT2_PEER_DLS_TEAR_DOWN 4 |
| #define MAX_DLS_MSG 5 |
| |
| #define DLS_FUNC_SIZE (MAX_DLS_STATE * MAX_DLS_MSG) |
| |
| // |
| // STA's WPA-PSK State machine: states, events, total function # |
| // |
| #define WPA_PSK_IDLE 0 |
| #define MAX_WPA_PSK_STATE 1 |
| |
| #define WPA_MACHINE_BASE 0 |
| #define MT2_EAPPacket 0 |
| #define MT2_EAPOLStart 1 |
| #define MT2_EAPOLLogoff 2 |
| #define MT2_EAPOLKey 3 |
| #define MT2_EAPOLASFAlert 4 |
| #define MAX_WPA_PSK_MSG 5 |
| |
| #define WPA_PSK_FUNC_SIZE (MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG) |
| |
| // |
| // STA's CISCO-AIRONET State machine: states, events, total function # |
| // |
| #define AIRONET_IDLE 0 |
| #define AIRONET_SCANNING 1 |
| #define MAX_AIRONET_STATE 2 |
| |
| #define AIRONET_MACHINE_BASE 0 |
| #define MT2_AIRONET_MSG 0 |
| #define MT2_AIRONET_SCAN_REQ 1 |
| #define MT2_AIRONET_SCAN_DONE 2 |
| #define MAX_AIRONET_MSG 3 |
| |
| #define AIRONET_FUNC_SIZE (MAX_AIRONET_STATE * MAX_AIRONET_MSG) |
| |
| // |
| // AP's CONTROL/CONNECT state machine: states, events, total function # |
| // |
| #define AP_CNTL_FUNC_SIZE 1 |
| |
| // |
| // AP's ASSOC state machine: states, events, total function # |
| // |
| #define AP_ASSOC_IDLE 0 |
| #define AP_MAX_ASSOC_STATE 1 |
| |
| #define AP_ASSOC_MACHINE_BASE 0 |
| #define APMT2_MLME_DISASSOC_REQ 0 |
| #define APMT2_PEER_DISASSOC_REQ 1 |
| #define APMT2_PEER_ASSOC_REQ 2 |
| #define APMT2_PEER_REASSOC_REQ 3 |
| #define APMT2_CLS3ERR 4 |
| #define AP_MAX_ASSOC_MSG 5 |
| |
| #define AP_ASSOC_FUNC_SIZE (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG) |
| |
| // |
| // AP's AUTHENTICATION state machine: states, events, total function # |
| // |
| #define AP_AUTH_REQ_IDLE 0 |
| #define AP_MAX_AUTH_STATE 1 |
| |
| #define AP_AUTH_MACHINE_BASE 0 |
| #define APMT2_MLME_DEAUTH_REQ 0 |
| #define APMT2_CLS2ERR 1 |
| #define AP_MAX_AUTH_MSG 2 |
| |
| #define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG) |
| |
| // |
| // AP's AUTH-RSP state machine: states, events, total function # |
| // |
| #define AP_AUTH_RSP_IDLE 0 |
| #define AP_MAX_AUTH_RSP_STATE 1 |
| |
| #define AP_AUTH_RSP_MACHINE_BASE 0 |
| #define APMT2_AUTH_CHALLENGE_TIMEOUT 0 |
| #define APMT2_PEER_AUTH_ODD 1 |
| #define APMT2_PEER_DEAUTH 2 |
| #define AP_MAX_AUTH_RSP_MSG 3 |
| |
| #define AP_AUTH_RSP_FUNC_SIZE (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG) |
| |
| // |
| // AP's SYNC state machine: states, events, total function # |
| // |
| #define AP_SYNC_IDLE 0 |
| #define AP_SCAN_LISTEN 1 |
| #define AP_MAX_SYNC_STATE 2 |
| |
| #define AP_SYNC_MACHINE_BASE 0 |
| #define APMT2_PEER_PROBE_REQ 0 |
| #define APMT2_PEER_BEACON 1 |
| #define APMT2_MLME_SCAN_REQ 2 |
| #define APMT2_PEER_PROBE_RSP 3 |
| #define APMT2_SCAN_TIMEOUT 4 |
| #define APMT2_MLME_SCAN_CNCL 5 |
| #define AP_MAX_SYNC_MSG 6 |
| |
| #define AP_SYNC_FUNC_SIZE (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG) |
| |
| // |
| // AP's WPA state machine: states, events, total function # |
| // |
| #define AP_WPA_PTK 0 |
| #define AP_MAX_WPA_PTK_STATE 1 |
| |
| #define AP_WPA_MACHINE_BASE 0 |
| #define APMT2_EAPPacket 0 |
| #define APMT2_EAPOLStart 1 |
| #define APMT2_EAPOLLogoff 2 |
| #define APMT2_EAPOLKey 3 |
| #define APMT2_EAPOLASFAlert 4 |
| #define AP_MAX_WPA_MSG 5 |
| |
| #define AP_WPA_FUNC_SIZE (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG) |
| |
| // ============================================================================= |
| |
| // value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header |
| #define BTYPE_MGMT 0 |
| #define BTYPE_CNTL 1 |
| #define BTYPE_DATA 2 |
| |
| // value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header |
| #define SUBTYPE_ASSOC_REQ 0 |
| #define SUBTYPE_ASSOC_RSP 1 |
| #define SUBTYPE_REASSOC_REQ 2 |
| #define SUBTYPE_REASSOC_RSP 3 |
| #define SUBTYPE_PROBE_REQ 4 |
| #define SUBTYPE_PROBE_RSP 5 |
| #define SUBTYPE_BEACON 8 |
| #define SUBTYPE_ATIM 9 |
| #define SUBTYPE_DISASSOC 10 |
| #define SUBTYPE_AUTH 11 |
| #define SUBTYPE_DEAUTH 12 |
| #define SUBTYPE_ACTION 13 |
| #define SUBTYPE_ACTION_NO_ACK 14 |
| |
| // value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header |
| #define SUBTYPE_WRAPPER 7 |
| #define SUBTYPE_BLOCK_ACK_REQ 8 |
| #define SUBTYPE_BLOCK_ACK 9 |
| #define SUBTYPE_PS_POLL 10 |
| #define SUBTYPE_RTS 11 |
| #define SUBTYPE_CTS 12 |
| #define SUBTYPE_ACK 13 |
| #define SUBTYPE_CFEND 14 |
| #define SUBTYPE_CFEND_CFACK 15 |
| |
| // value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header |
| #define SUBTYPE_DATA 0 |
| #define SUBTYPE_DATA_CFACK 1 |
| #define SUBTYPE_DATA_CFPOLL 2 |
| #define SUBTYPE_DATA_CFACK_CFPOLL 3 |
| #define SUBTYPE_NULL_FUNC 4 |
| #define SUBTYPE_CFACK 5 |
| #define SUBTYPE_CFPOLL 6 |
| #define SUBTYPE_CFACK_CFPOLL 7 |
| #define SUBTYPE_QDATA 8 |
| #define SUBTYPE_QDATA_CFACK 9 |
| #define SUBTYPE_QDATA_CFPOLL 10 |
| #define SUBTYPE_QDATA_CFACK_CFPOLL 11 |
| #define SUBTYPE_QOS_NULL 12 |
| #define SUBTYPE_QOS_CFACK 13 |
| #define SUBTYPE_QOS_CFPOLL 14 |
| #define SUBTYPE_QOS_CFACK_CFPOLL 15 |
| |
| // ACK policy of QOS Control field bit 6:5 |
| #define NORMAL_ACK 0x00 // b6:5 = 00 |
| #define NO_ACK 0x20 // b6:5 = 01 |
| #define NO_EXPLICIT_ACK 0x40 // b6:5 = 10 |
| #define BLOCK_ACK 0x60 // b6:5 = 11 |
| |
| // |
| // rtmp_data.c use these definition |
| // |
| #define LENGTH_802_11 24 |
| #define LENGTH_802_11_AND_H 30 |
| #define LENGTH_802_11_CRC_H 34 |
| #define LENGTH_802_11_CRC 28 |
| #define LENGTH_802_11_WITH_ADDR4 30 |
| #define LENGTH_802_3 14 |
| #define LENGTH_802_3_TYPE 2 |
| #define LENGTH_802_1_H 8 |
| #define LENGTH_EAPOL_H 4 |
| #define LENGTH_WMMQOS_H 2 |
| #define LENGTH_CRC 4 |
| #define MAX_SEQ_NUMBER 0x0fff |
| #define LENGTH_802_3_NO_TYPE 12 |
| #define LENGTH_802_1Q 4 /* VLAN related */ |
| |
| // STA_CSR4.field.TxResult |
| #define TX_RESULT_SUCCESS 0 |
| #define TX_RESULT_ZERO_LENGTH 1 |
| #define TX_RESULT_UNDER_RUN 2 |
| #define TX_RESULT_OHY_ERROR 4 |
| #define TX_RESULT_RETRY_FAIL 6 |
| |
| // All PHY rate summary in TXD |
| // Preamble MODE in TxD |
| #define MODE_CCK 0 |
| #define MODE_OFDM 1 |
| #define MODE_HTMIX 2 |
| #define MODE_HTGREENFIELD 3 |
| |
| // MCS for CCK. BW.SGI.STBC are reserved |
| #define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps |
| #define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps |
| #define MCS_LONGP_RATE_5_5 2 |
| #define MCS_LONGP_RATE_11 3 |
| #define MCS_SHORTP_RATE_1 4 // long preamble CCK 1Mbps. short is forbidden in 1Mbps |
| #define MCS_SHORTP_RATE_2 5 // short preamble CCK 2Mbps |
| #define MCS_SHORTP_RATE_5_5 6 |
| #define MCS_SHORTP_RATE_11 7 |
| // To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved |
| #define MCS_RATE_6 0 // legacy OFDM |
| #define MCS_RATE_9 1 // OFDM |
| #define MCS_RATE_12 2 // OFDM |
| #define MCS_RATE_18 3 // OFDM |
| #define MCS_RATE_24 4 // OFDM |
| #define MCS_RATE_36 5 // OFDM |
| #define MCS_RATE_48 6 // OFDM |
| #define MCS_RATE_54 7 // OFDM |
| // HT |
| #define MCS_0 0 // 1S |
| #define MCS_1 1 |
| #define MCS_2 2 |
| #define MCS_3 3 |
| #define MCS_4 4 |
| #define MCS_5 5 |
| #define MCS_6 6 |
| #define MCS_7 7 |
| #define MCS_8 8 // 2S |
| #define MCS_9 9 |
| #define MCS_10 10 |
| #define MCS_11 11 |
| #define MCS_12 12 |
| #define MCS_13 13 |
| #define MCS_14 14 |
| #define MCS_15 15 |
| #define MCS_16 16 // 3*3 |
| #define MCS_17 17 |
| #define MCS_18 18 |
| #define MCS_19 19 |
| #define MCS_20 20 |
| #define MCS_21 21 |
| #define MCS_22 22 |
| #define MCS_23 23 |
| #define MCS_32 32 |
| #define MCS_AUTO 33 |
| |
| // OID_HTPHYMODE |
| // MODE |
| #define HTMODE_MM 0 |
| #define HTMODE_GF 1 |
| |
| // Fixed Tx MODE - HT, CCK or OFDM |
| #define FIXED_TXMODE_HT 0 |
| #define FIXED_TXMODE_CCK 1 |
| #define FIXED_TXMODE_OFDM 2 |
| // BW |
| #define BW_20 BAND_WIDTH_20 |
| #define BW_40 BAND_WIDTH_40 |
| #define BW_BOTH BAND_WIDTH_BOTH |
| #define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. |
| |
| // SHORTGI |
| #define GI_400 GAP_INTERVAL_400 // only support in HT mode |
| #define GI_BOTH GAP_INTERVAL_BOTH |
| #define GI_800 GAP_INTERVAL_800 |
| // STBC |
| #define STBC_NONE 0 |
| #define STBC_USE 1 // limited use in rt2860b phy |
| #define RXSTBC_ONE 1 // rx support of one spatial stream |
| #define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream |
| #define RXSTBC_THR 3 // rx support of 1~3 spatial stream |
| // MCS FEEDBACK |
| #define MCSFBK_NONE 0 // not support mcs feedback / |
| #define MCSFBK_RSV 1 // reserved |
| #define MCSFBK_UNSOLICIT 2 // only support unsolict mcs feedback |
| #define MCSFBK_MRQ 3 // response to both MRQ and unsolict mcs feedback |
| |
| // MIMO power safe |
| #define MMPS_STATIC 0 |
| #define MMPS_DYNAMIC 1 |
| #define MMPS_RSV 2 |
| #define MMPS_ENABLE 3 |
| |
| |
| // A-MSDU size |
| #define AMSDU_0 0 |
| #define AMSDU_1 1 |
| |
| // MCS use 7 bits |
| #define TXRATEMIMO 0x80 |
| #define TXRATEMCS 0x7F |
| #define TXRATEOFDM 0x7F |
| #define RATE_1 0 |
| #define RATE_2 1 |
| #define RATE_5_5 2 |
| #define RATE_11 3 |
| #define RATE_6 4 // OFDM |
| #define RATE_9 5 // OFDM |
| #define RATE_12 6 // OFDM |
| #define RATE_18 7 // OFDM |
| #define RATE_24 8 // OFDM |
| #define RATE_36 9 // OFDM |
| #define RATE_48 10 // OFDM |
| #define RATE_54 11 // OFDM |
| #define RATE_FIRST_OFDM_RATE RATE_6 |
| #define RATE_LAST_OFDM_RATE RATE_54 |
| #define RATE_6_5 12 // HT mix |
| #define RATE_13 13 // HT mix |
| #define RATE_19_5 14 // HT mix |
| #define RATE_26 15 // HT mix |
| #define RATE_39 16 // HT mix |
| #define RATE_52 17 // HT mix |
| #define RATE_58_5 18 // HT mix |
| #define RATE_65 19 // HT mix |
| #define RATE_78 20 // HT mix |
| #define RATE_104 21 // HT mix |
| #define RATE_117 22 // HT mix |
| #define RATE_130 23 // HT mix |
| //#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only |
| #define HTRATE_0 12 |
| #define RATE_FIRST_MM_RATE HTRATE_0 |
| #define RATE_FIRST_HT_RATE HTRATE_0 |
| #define RATE_LAST_HT_RATE HTRATE_0 |
| |
| // pTxWI->txop |
| #define IFS_HTTXOP 0 // The txop will be handles by ASIC. |
| #define IFS_PIFS 1 |
| #define IFS_SIFS 2 |
| #define IFS_BACKOFF 3 |
| |
| // pTxD->RetryMode |
| #define LONG_RETRY 1 |
| #define SHORT_RETRY 0 |
| |
| // Country Region definition |
| #define REGION_MINIMUM_BG_BAND 0 |
| #define REGION_0_BG_BAND 0 // 1-11 |
| #define REGION_1_BG_BAND 1 // 1-13 |
| #define REGION_2_BG_BAND 2 // 10-11 |
| #define REGION_3_BG_BAND 3 // 10-13 |
| #define REGION_4_BG_BAND 4 // 14 |
| #define REGION_5_BG_BAND 5 // 1-14 |
| #define REGION_6_BG_BAND 6 // 3-9 |
| #define REGION_7_BG_BAND 7 // 5-13 |
| #define REGION_31_BG_BAND 31 // 5-13 |
| #define REGION_MAXIMUM_BG_BAND 7 |
| |
| #define REGION_MINIMUM_A_BAND 0 |
| #define REGION_0_A_BAND 0 // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 |
| #define REGION_1_A_BAND 1 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 |
| #define REGION_2_A_BAND 2 // 36, 40, 44, 48, 52, 56, 60, 64 |
| #define REGION_3_A_BAND 3 // 52, 56, 60, 64, 149, 153, 157, 161 |
| #define REGION_4_A_BAND 4 // 149, 153, 157, 161, 165 |
| #define REGION_5_A_BAND 5 // 149, 153, 157, 161 |
| #define REGION_6_A_BAND 6 // 36, 40, 44, 48 |
| #define REGION_7_A_BAND 7 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 |
| #define REGION_8_A_BAND 8 // 52, 56, 60, 64 |
| #define REGION_9_A_BAND 9 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 |
| #define REGION_10_A_BAND 10 // 36, 40, 44, 48, 149, 153, 157, 161, 165 |
| #define REGION_11_A_BAND 11 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 |
| #define REGION_MAXIMUM_A_BAND 11 |
| |
| // pTxD->CipherAlg |
| #define CIPHER_NONE 0 |
| #define CIPHER_WEP64 1 |
| #define CIPHER_WEP128 2 |
| #define CIPHER_TKIP 3 |
| #define CIPHER_AES 4 |
| #define CIPHER_CKIP64 5 |
| #define CIPHER_CKIP128 6 |
| #define CIPHER_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table |
| #define CIPHER_SMS4 8 |
| |
| // value domain of pAd->RfIcType |
| #define RFIC_2820 1 // 2.4G 2T3R |
| #define RFIC_2850 2 // 2.4G/5G 2T3R |
| #define RFIC_2720 3 // 2.4G 1T2R |
| #define RFIC_2750 4 // 2.4G/5G 1T2R |
| #define RFIC_3020 5 // 2.4G 1T1R |
| #define RFIC_2020 6 // 2.4G B/G |
| #ifdef RT30xx |
| #define RFIC_3021 7 // 2.4G 1T2R |
| #define RFIC_3022 8 // 2.4G 2T2R |
| #endif |
| |
| // LED Status. |
| #define LED_LINK_DOWN 0 |
| #define LED_LINK_UP 1 |
| #define LED_RADIO_OFF 2 |
| #define LED_RADIO_ON 3 |
| #define LED_HALT 4 |
| #define LED_WPS 5 |
| #define LED_ON_SITE_SURVEY 6 |
| #define LED_POWER_UP 7 |
| |
| // value domain of pAd->LedCntl.LedMode and E2PROM |
| #define LED_MODE_DEFAULT 0 |
| #define LED_MODE_TWO_LED 1 |
| #define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8 |
| |
| // RC4 init value, used fro WEP & TKIP |
| #define PPPINITFCS32 0xffffffff /* Initial FCS value */ |
| |
| // value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition |
| #define WPA_802_1X_PORT_SECURED 1 |
| #define WPA_802_1X_PORT_NOT_SECURED 2 |
| |
| #define PAIRWISE_KEY 1 |
| #define GROUP_KEY 2 |
| |
| //definition of DRS |
| #define MAX_STEP_OF_TX_RATE_SWITCH 32 |
| |
| |
| // pre-allocated free NDIS PACKET/BUFFER poll for internal usage |
| #define MAX_NUM_OF_FREE_NDIS_PACKET 128 |
| |
| //Block ACK |
| #define MAX_TX_REORDERBUF 64 |
| #define MAX_RX_REORDERBUF 64 |
| #define DEFAULT_TX_TIMEOUT 30 |
| #define DEFAULT_RX_TIMEOUT 30 |
| |
| // definition of Recipient or Originator |
| #define I_RECIPIENT TRUE |
| #define I_ORIGINATOR FALSE |
| |
| #define DEFAULT_BBP_TX_POWER 0 |
| #define DEFAULT_RF_TX_POWER 5 |
| |
| #define MAX_INI_BUFFER_SIZE 4096 |
| #define MAX_PARAM_BUFFER_SIZE (2048) // enough for ACL (18*64) |
| //18 : the length of Mac address acceptable format "01:02:03:04:05:06;") |
| //64 : MAX_NUM_OF_ACL_LIST |
| // definition of pAd->OpMode |
| #define OPMODE_STA 0 |
| #define OPMODE_AP 1 |
| //#define OPMODE_L3_BRG 2 // as AP and STA at the same time |
| |
| // ========================= AP rtmp_def.h =========================== |
| // value domain for pAd->EventTab.Log[].Event |
| #define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point" |
| #define EVENT_ASSOCIATED 1 // Log = "hh:mm:ss STA 00:01:02:03:04:05 associated" |
| #define EVENT_DISASSOCIATED 2 // Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS" |
| #define EVENT_AGED_OUT 3 // Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS" |
| #define EVENT_COUNTER_M 4 |
| #define EVENT_INVALID_PSK 5 |
| #define EVENT_MAX_EVENT_TYPE 6 |
| // ==== end of AP rtmp_def.h ============ |
| |
| // definition RSSI Number |
| #define RSSI_0 0 |
| #define RSSI_1 1 |
| #define RSSI_2 2 |
| |
| // definition of radar detection |
| #define RD_NORMAL_MODE 0 // Not found radar signal |
| #define RD_SWITCHING_MODE 1 // Found radar signal, and doing channel switch |
| #define RD_SILENCE_MODE 2 // After channel switch, need to be silence a while to ensure radar not found |
| |
| //Driver defined cid for mapping status and command. |
| #define SLEEPCID 0x11 |
| #define WAKECID 0x22 |
| #define QUERYPOWERCID 0x33 |
| #define OWNERMCU 0x1 |
| #define OWNERCPU 0x0 |
| |
| // MBSSID definition |
| #define ENTRY_NOT_FOUND 0xFF |
| |
| |
| /* After Linux 2.6.9, |
| * VLAN module use Private (from user) interface flags (netdevice->priv_flags). |
| * #define IFF_802_1Q_VLAN 0x1 -- 802.1Q VLAN device. in if.h |
| * ref to ip_sabotage_out() [ out->priv_flags & IFF_802_1Q_VLAN ] in br_netfilter.c |
| * |
| * For this reason, we MUST use EVEN value in priv_flags |
| */ |
| #define INT_MAIN 0x0100 |
| #define INT_MBSSID 0x0200 |
| #define INT_WDS 0x0300 |
| #define INT_APCLI 0x0400 |
| #define INT_MESH 0x0500 |
| |
| // Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode) |
| |
| // WEP Key TYPE |
| #define WEP_HEXADECIMAL_TYPE 0 |
| #define WEP_ASCII_TYPE 1 |
| |
| |
| |
| // WIRELESS EVENTS definition |
| /* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */ |
| #define IW_CUSTOM_MAX_LEN 255 /* In bytes */ |
| |
| // For system event - start |
| #define IW_SYS_EVENT_FLAG_START 0x0200 |
| #define IW_ASSOC_EVENT_FLAG 0x0200 |
| #define IW_DISASSOC_EVENT_FLAG 0x0201 |
| #define IW_DEAUTH_EVENT_FLAG 0x0202 |
| #define IW_AGEOUT_EVENT_FLAG 0x0203 |
| #define IW_COUNTER_MEASURES_EVENT_FLAG 0x0204 |
| #define IW_REPLAY_COUNTER_DIFF_EVENT_FLAG 0x0205 |
| #define IW_RSNIE_DIFF_EVENT_FLAG 0x0206 |
| #define IW_MIC_DIFF_EVENT_FLAG 0x0207 |
| #define IW_ICV_ERROR_EVENT_FLAG 0x0208 |
| #define IW_MIC_ERROR_EVENT_FLAG 0x0209 |
| #define IW_GROUP_HS_TIMEOUT_EVENT_FLAG 0x020A |
| #define IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG 0x020B |
| #define IW_RSNIE_SANITY_FAIL_EVENT_FLAG 0x020C |
| #define IW_SET_KEY_DONE_WPA1_EVENT_FLAG 0x020D |
| #define IW_SET_KEY_DONE_WPA2_EVENT_FLAG 0x020E |
| #define IW_STA_LINKUP_EVENT_FLAG 0x020F |
| #define IW_STA_LINKDOWN_EVENT_FLAG 0x0210 |
| #define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211 |
| #define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212 |
| // if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END |
| #define IW_SYS_EVENT_FLAG_END 0x0212 |
| #define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1) |
| // For system event - end |
| |
| // For spoof attack event - start |
| #define IW_SPOOF_EVENT_FLAG_START 0x0300 |
| #define IW_CONFLICT_SSID_EVENT_FLAG 0x0300 |
| #define IW_SPOOF_ASSOC_RESP_EVENT_FLAG 0x0301 |
| #define IW_SPOOF_REASSOC_RESP_EVENT_FLAG 0x0302 |
| #define IW_SPOOF_PROBE_RESP_EVENT_FLAG 0x0303 |
| #define IW_SPOOF_BEACON_EVENT_FLAG 0x0304 |
| #define IW_SPOOF_DISASSOC_EVENT_FLAG 0x0305 |
| #define IW_SPOOF_AUTH_EVENT_FLAG 0x0306 |
| #define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307 |
| #define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308 |
| #define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309 |
| // if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END |
| #define IW_SPOOF_EVENT_FLAG_END 0x0309 |
| #define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1) |
| // For spoof attack event - end |
| |
| // For flooding attack event - start |
| #define IW_FLOOD_EVENT_FLAG_START 0x0400 |
| #define IW_FLOOD_AUTH_EVENT_FLAG 0x0400 |
| #define IW_FLOOD_ASSOC_REQ_EVENT_FLAG 0x0401 |
| #define IW_FLOOD_REASSOC_REQ_EVENT_FLAG 0x0402 |
| #define IW_FLOOD_PROBE_REQ_EVENT_FLAG 0x0403 |
| #define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404 |
| #define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405 |
| #define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406 |
| // if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END |
| #define IW_FLOOD_EVENT_FLAG_END 0x0406 |
| #define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1) |
| // For flooding attack - end |
| |
| // End - WIRELESS EVENTS definition |
| |
| // definition for DLS, kathy |
| #define MAX_NUM_OF_INIT_DLS_ENTRY 1 |
| #define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY |
| |
| //Block ACK , rt2860, kathy |
| #define MAX_TX_REORDERBUF 64 |
| #define MAX_RX_REORDERBUF 64 |
| #define DEFAULT_TX_TIMEOUT 30 |
| #define DEFAULT_RX_TIMEOUT 30 |
| #define MAX_BARECI_SESSION 8 |
| |
| #ifndef IW_ESSID_MAX_SIZE |
| /* Maximum size of the ESSID and pAd->nickname strings */ |
| #define IW_ESSID_MAX_SIZE 32 |
| #endif |
| |
| #ifdef MCAST_RATE_SPECIFIC |
| #define MCAST_DISABLE 0 |
| #define MCAST_CCK 1 |
| #define MCAST_OFDM 2 |
| #define MCAST_HTMIX 3 |
| #endif // MCAST_RATE_SPECIFIC // |
| |
| #ifdef RT2860 |
| // For AsicRadioOff/AsicRadioOn/AsicForceWakeup function |
| // This is to indicate from where to call this function. |
| #define DOT11POWERSAVE 0 // TO do .11 power save sleep |
| #define GUIRADIO_OFF 1 // To perform Radio OFf command from GUI |
| #define RTMP_HALT 2 // Called from Halt handler. |
| #define GUI_IDLE_POWER_SAVE 3 // Call to sleep before link up with AP |
| #define FROM_TX 4 // Force wake up from Tx packet. |
| #endif |
| #ifdef RT2870 |
| // For AsicRadioOff/AsicRadioOn function |
| #define DOT11POWERSAVE 0 |
| #define GUIRADIO_OFF 1 |
| #define RTMP_HALT 2 |
| #define GUI_IDLE_POWER_SAVE 3 |
| #endif |
| |
| // definition for WpaSupport flag |
| #define WPA_SUPPLICANT_DISABLE 0 |
| #define WPA_SUPPLICANT_ENABLE 1 |
| #define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI 2 |
| |
| // Endian byte swapping codes |
| #define SWAP16(x) \ |
| ((UINT16)( \ |
| (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \ |
| (((UINT16)(x) & (UINT16) 0xff00U) >> 8) )) |
| |
| #define SWAP32(x) \ |
| ((UINT32)( \ |
| (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \ |
| (((UINT32)(x) & (UINT32) 0x0000ff00UL) << 8) | \ |
| (((UINT32)(x) & (UINT32) 0x00ff0000UL) >> 8) | \ |
| (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) )) |
| |
| #define SWAP64(x) \ |
| ((UINT64)( \ |
| (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \ |
| (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \ |
| (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \ |
| (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) << 8) | \ |
| (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >> 8) | \ |
| (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \ |
| (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \ |
| (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) )) |
| |
| #define cpu2le64(x) ((UINT64)(x)) |
| #define le2cpu64(x) ((UINT64)(x)) |
| #define cpu2le32(x) ((UINT32)(x)) |
| #define le2cpu32(x) ((UINT32)(x)) |
| #define cpu2le16(x) ((UINT16)(x)) |
| #define le2cpu16(x) ((UINT16)(x)) |
| #define cpu2be64(x) SWAP64((x)) |
| #define be2cpu64(x) SWAP64((x)) |
| #define cpu2be32(x) SWAP32((x)) |
| #define be2cpu32(x) SWAP32((x)) |
| #define cpu2be16(x) SWAP16((x)) |
| #define be2cpu16(x) SWAP16((x)) |
| |
| #endif // __RTMP_DEF_H__ |
| |
| |
