drivers/staging/meilhaus/me1400_ext_irq_reg.h

/**
 * @file me1400_ext_irq_reg.h
 *
 * @brief ME-1400 external interrupt register definitions.
 * @note Copyright (C) 2007 Meilhaus Electronic GmbH (support@meilhaus.de)
 * @author Guenter Gebhardt
 * @author Krzysztof Gantzke	(k.gantzke@meilhaus.de)
 */

/*
 * Copyright (C) 2007 Meilhaus Electronic GmbH (support@meilhaus.de)
 *
 * This file is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#ifndef _ME1400_EXT_IRQ_REG_H_
# define _ME1400_EXT_IRQ_REG_H_

# ifdef __KERNEL__

#  define PLX_INTCSR_REG				0x4C	/**< The PLX interrupt control and status register offset. */
#  define PLX_ICR_REG					0x50	/**< The PLX initialization control register offset. */

#  define PLX_LOCAL_INT1_EN				0x01	/**< If set the local interrupt 1 is enabled. */
#  define PLX_LOCAL_INT1_POL			0x02	/**< If set the local interrupt 1 polarity is high active. */
#  define PLX_LOCAL_INT1_STATE			0x04	/**< If set the local interrupt 1 is activ. */
#  define PLX_LOCAL_INT2_EN				0x08	/**< If set the local interrupt 2 is enabled. */
#  define PLX_LOCAL_INT2_POL			0x10	/**< If set the local interrupt 2 polarity is high active. */
#  define PLX_LOCAL_INT2_STATE			0x20	/**< If set the local interrupt 2 is activ. */
#  define PLX_PCI_INT_EN				0x40	/**< If set the PCI interrupt is enabled. */
#  define PLX_SOFT_INT					0x80	/**< If set an interrupt is generated. */

#  define ME1400AB_EXT_IRQ_CTRL_REG		0x11	/**< The external interrupt control register offset. */

#  define ME1400AB_EXT_IRQ_CLK_EN		0x01	/**< If this bit is set, the clock output is enabled. */
#  define ME1400AB_EXT_IRQ_IRQ_EN		0x02	/**< If set the external interrupt is enabled. Clearing this bit clears a pending interrupt. */

#  define ME1400CD_EXT_IRQ_CTRL_REG		0x11	/**< The external interrupt control register offset. */

#  define ME1400CD_EXT_IRQ_CLK_EN		0x10	/**< If set the external interrupt is enabled. Clearing this bit clears a pending interrupt.*/

# endif	//__KERNEL__

#endif //_ME1400_EXT_IRQ_REG_H_