blob: 77b1e769ac923ce9fef7913aca17ba730d85aa60 [file] [log] [blame]
/*
* Copyright (C) 2005-2006 Micronas USA Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/unistd.h>
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/firmware.h>
#include <linux/semaphore.h>
#include <linux/uaccess.h>
#include <asm/system.h>
#include <linux/videodev2.h>
#include <media/tuner.h>
#include <media/v4l2-common.h>
#include "go7007-priv.h"
#include "wis-i2c.h"
/*
* Wait for an interrupt to be delivered from the GO7007SB and return
* the associated value and data.
*
* Must be called with the hw_lock held.
*/
int go7007_read_interrupt(struct go7007 *go, u16 *value, u16 *data)
{
go->interrupt_available = 0;
go->hpi_ops->read_interrupt(go);
if (wait_event_timeout(go->interrupt_waitq,
go->interrupt_available, 5*HZ) < 0) {
printk(KERN_ERR "go7007: timeout waiting for read interrupt\n");
return -1;
}
if (!go->interrupt_available)
return -1;
go->interrupt_available = 0;
*value = go->interrupt_value & 0xfffe;
*data = go->interrupt_data;
return 0;
}
EXPORT_SYMBOL(go7007_read_interrupt);
/*
* Read a register/address on the GO7007SB.
*
* Must be called with the hw_lock held.
*/
int go7007_read_addr(struct go7007 *go, u16 addr, u16 *data)
{
int count = 100;
u16 value;
if (go7007_write_interrupt(go, 0x0010, addr) < 0)
return -EIO;
while (count-- > 0) {
if (go7007_read_interrupt(go, &value, data) == 0 &&
value == 0xa000)
return 0;
}
return -EIO;
}
EXPORT_SYMBOL(go7007_read_addr);
/*
* Send the boot firmware to the encoder, which just wakes it up and lets
* us talk to the GPIO pins and on-board I2C adapter.
*
* Must be called with the hw_lock held.
*/
static int go7007_load_encoder(struct go7007 *go)
{
const struct firmware *fw_entry;
char fw_name[] = "go7007fw.bin";
void *bounce;
int fw_len, rv = 0;
u16 intr_val, intr_data;
if (request_firmware(&fw_entry, fw_name, go->dev)) {
printk(KERN_ERR
"go7007: unable to load firmware from file \"%s\"\n",
fw_name);
return -1;
}
if (fw_entry->size < 16 || memcmp(fw_entry->data, "WISGO7007FW", 11)) {
printk(KERN_ERR "go7007: file \"%s\" does not appear to be "
"go7007 firmware\n", fw_name);
release_firmware(fw_entry);
return -1;
}
fw_len = fw_entry->size - 16;
bounce = kmalloc(fw_len, GFP_KERNEL);
if (bounce == NULL) {
printk(KERN_ERR "go7007: unable to allocate %d bytes for "
"firmware transfer\n", fw_len);
release_firmware(fw_entry);
return -1;
}
memcpy(bounce, fw_entry->data + 16, fw_len);
release_firmware(fw_entry);
if (go7007_interface_reset(go) < 0 ||
go7007_send_firmware(go, bounce, fw_len) < 0 ||
go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
(intr_val & ~0x1) != 0x5a5a) {
printk(KERN_ERR "go7007: error transferring firmware\n");
rv = -1;
}
kfree(bounce);
return rv;
}
/*
* Boot the encoder and register the I2C adapter if requested. Do the
* minimum initialization necessary, since the board-specific code may
* still need to probe the board ID.
*
* Must NOT be called with the hw_lock held.
*/
int go7007_boot_encoder(struct go7007 *go, int init_i2c)
{
int ret;
down(&go->hw_lock);
ret = go7007_load_encoder(go);
up(&go->hw_lock);
if (ret < 0)
return -1;
if (!init_i2c)
return 0;
if (go7007_i2c_init(go) < 0)
return -1;
go->i2c_adapter_online = 1;
return 0;
}
EXPORT_SYMBOL(go7007_boot_encoder);
/*
* Configure any hardware-related registers in the GO7007, such as GPIO
* pins and bus parameters, which are board-specific. This assumes
* the boot firmware has already been downloaded.
*
* Must be called with the hw_lock held.
*/
static int go7007_init_encoder(struct go7007 *go)
{
if (go->board_info->audio_flags & GO7007_AUDIO_I2S_MASTER) {
go7007_write_addr(go, 0x1000, 0x0811);
go7007_write_addr(go, 0x1000, 0x0c11);
}
if (go->board_id == GO7007_BOARDID_MATRIX_REV) {
/* Set GPIO pin 0 to be an output (audio clock control) */
go7007_write_addr(go, 0x3c82, 0x0001);
go7007_write_addr(go, 0x3c80, 0x00fe);
}
return 0;
}
/*
* Send the boot firmware to the GO7007 and configure the registers. This
* is the only way to stop the encoder once it has started streaming video.
*
* Must be called with the hw_lock held.
*/
int go7007_reset_encoder(struct go7007 *go)
{
if (go7007_load_encoder(go) < 0)
return -1;
return go7007_init_encoder(go);
}
/*
* Attempt to instantiate an I2C client by ID, probably loading a module.
*/
static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
int id, int addr)
{
struct i2c_board_info info;
char *modname;
switch (id) {
case I2C_DRIVERID_WIS_SAA7115:
modname = "wis-saa7115";
break;
case I2C_DRIVERID_WIS_SAA7113:
modname = "wis-saa7113";
break;
case I2C_DRIVERID_WIS_UDA1342:
modname = "wis-uda1342";
break;
case I2C_DRIVERID_WIS_SONY_TUNER:
modname = "wis-sony-tuner";
break;
case I2C_DRIVERID_WIS_TW9903:
modname = "wis-tw9903";
break;
case I2C_DRIVERID_WIS_TW2804:
modname = "wis-tw2804";
break;
case I2C_DRIVERID_WIS_OV7640:
modname = "wis-ov7640";
break;
case I2C_DRIVERID_S2250:
modname = "s2250-board";
break;
default:
modname = NULL;
break;
}
if (modname != NULL)
request_module(modname);
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = addr;
strlcpy(info.type, type, I2C_NAME_SIZE);
if (!i2c_new_device(adapter, &info))
return 0;
if (modname != NULL)
printk(KERN_INFO
"go7007: probing for module %s failed\n", modname);
else
printk(KERN_INFO
"go7007: sensor %u seems to be unsupported!\n", id);
return -1;
}
/*
* Finalize the GO7007 hardware setup, register the on-board I2C adapter
* (if used on this board), load the I2C client driver for the sensor
* (SAA7115 or whatever) and other devices, and register the ALSA and V4L2
* interfaces.
*
* Must NOT be called with the hw_lock held.
*/
int go7007_register_encoder(struct go7007 *go)
{
int i, ret;
printk(KERN_INFO "go7007: registering new %s\n", go->name);
down(&go->hw_lock);
ret = go7007_init_encoder(go);
up(&go->hw_lock);
if (ret < 0)
return -1;
if (!go->i2c_adapter_online &&
go->board_info->flags & GO7007_BOARD_USE_ONBOARD_I2C) {
if (go7007_i2c_init(go) < 0)
return -1;
go->i2c_adapter_online = 1;
}
if (go->i2c_adapter_online) {
for (i = 0; i < go->board_info->num_i2c_devs; ++i)
init_i2c_module(&go->i2c_adapter,
go->board_info->i2c_devs[i].type,
go->board_info->i2c_devs[i].id,
go->board_info->i2c_devs[i].addr);
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
i2c_clients_command(&go->i2c_adapter,
DECODER_SET_CHANNEL, &go->channel_number);
}
if (go->board_info->flags & GO7007_BOARD_HAS_AUDIO) {
go->audio_enabled = 1;
go7007_snd_init(go);
}
return go7007_v4l2_init(go);
}
EXPORT_SYMBOL(go7007_register_encoder);
/*
* Send the encode firmware to the encoder, which will cause it
* to immediately start delivering the video and audio streams.
*
* Must be called with the hw_lock held.
*/
int go7007_start_encoder(struct go7007 *go)
{
u8 *fw;
int fw_len, rv = 0, i;
u16 intr_val, intr_data;
go->modet_enable = 0;
if (!go->dvd_mode)
for (i = 0; i < 4; ++i) {
if (go->modet[i].enable) {
go->modet_enable = 1;
continue;
}
go->modet[i].pixel_threshold = 32767;
go->modet[i].motion_threshold = 32767;
go->modet[i].mb_threshold = 32767;
}
if (go7007_construct_fw_image(go, &fw, &fw_len) < 0)
return -1;
if (go7007_send_firmware(go, fw, fw_len) < 0 ||
go7007_read_interrupt(go, &intr_val, &intr_data) < 0) {
printk(KERN_ERR "go7007: error transferring firmware\n");
rv = -1;
goto start_error;
}
go->state = STATE_DATA;
go->parse_length = 0;
go->seen_frame = 0;
if (go7007_stream_start(go) < 0) {
printk(KERN_ERR "go7007: error starting stream transfer\n");
rv = -1;
goto start_error;
}
start_error:
kfree(fw);
return rv;
}
/*
* Store a byte in the current video buffer, if there is one.
*/
static inline void store_byte(struct go7007_buffer *gobuf, u8 byte)
{
if (gobuf != NULL && gobuf->bytesused < GO7007_BUF_SIZE) {
unsigned int pgidx = gobuf->offset >> PAGE_SHIFT;
unsigned int pgoff = gobuf->offset & ~PAGE_MASK;
*((u8 *)page_address(gobuf->pages[pgidx]) + pgoff) = byte;
++gobuf->offset;
++gobuf->bytesused;
}
}
/*
* Deliver the last video buffer and get a new one to start writing to.
*/
static void frame_boundary(struct go7007 *go)
{
struct go7007_buffer *gobuf;
int i;
if (go->active_buf) {
if (go->active_buf->modet_active) {
if (go->active_buf->bytesused + 216 < GO7007_BUF_SIZE) {
for (i = 0; i < 216; ++i)
store_byte(go->active_buf,
go->active_map[i]);
go->active_buf->bytesused -= 216;
} else
go->active_buf->modet_active = 0;
}
go->active_buf->state = BUF_STATE_DONE;
wake_up_interruptible(&go->frame_waitq);
go->active_buf = NULL;
}
list_for_each_entry(gobuf, &go->stream, stream)
if (gobuf->state == BUF_STATE_QUEUED) {
gobuf->seq = go->next_seq;
do_gettimeofday(&gobuf->timestamp);
go->active_buf = gobuf;
break;
}
++go->next_seq;
}
static void write_bitmap_word(struct go7007 *go)
{
int x, y, i, stride = ((go->width >> 4) + 7) >> 3;
for (i = 0; i < 16; ++i) {
y = (((go->parse_length - 1) << 3) + i) / (go->width >> 4);
x = (((go->parse_length - 1) << 3) + i) % (go->width >> 4);
go->active_map[stride * y + (x >> 3)] |=
(go->modet_word & 1) << (x & 0x7);
go->modet_word >>= 1;
}
}
/*
* Parse a chunk of the video stream into frames. The frames are not
* delimited by the hardware, so we have to parse the frame boundaries
* based on the type of video stream we're receiving.
*/
void go7007_parse_video_stream(struct go7007 *go, u8 *buf, int length)
{
int i, seq_start_code = -1, frame_start_code = -1;
spin_lock(&go->spinlock);
switch (go->format) {
case GO7007_FORMAT_MPEG4:
seq_start_code = 0xB0;
frame_start_code = 0xB6;
break;
case GO7007_FORMAT_MPEG1:
case GO7007_FORMAT_MPEG2:
seq_start_code = 0xB3;
frame_start_code = 0x00;
break;
}
for (i = 0; i < length; ++i) {
if (go->active_buf != NULL &&
go->active_buf->bytesused >= GO7007_BUF_SIZE - 3) {
printk(KERN_DEBUG "go7007: dropping oversized frame\n");
go->active_buf->offset -= go->active_buf->bytesused;
go->active_buf->bytesused = 0;
go->active_buf->modet_active = 0;
go->active_buf = NULL;
}
switch (go->state) {
case STATE_DATA:
switch (buf[i]) {
case 0x00:
go->state = STATE_00;
break;
case 0xFF:
go->state = STATE_FF;
break;
default:
store_byte(go->active_buf, buf[i]);
break;
}
break;
case STATE_00:
switch (buf[i]) {
case 0x00:
go->state = STATE_00_00;
break;
case 0xFF:
store_byte(go->active_buf, 0x00);
go->state = STATE_FF;
break;
default:
store_byte(go->active_buf, 0x00);
store_byte(go->active_buf, buf[i]);
go->state = STATE_DATA;
break;
}
break;
case STATE_00_00:
switch (buf[i]) {
case 0x00:
store_byte(go->active_buf, 0x00);
/* go->state remains STATE_00_00 */
break;
case 0x01:
go->state = STATE_00_00_01;
break;
case 0xFF:
store_byte(go->active_buf, 0x00);
store_byte(go->active_buf, 0x00);
go->state = STATE_FF;
break;
default:
store_byte(go->active_buf, 0x00);
store_byte(go->active_buf, 0x00);
store_byte(go->active_buf, buf[i]);
go->state = STATE_DATA;
break;
}
break;
case STATE_00_00_01:
/* If this is the start of a new MPEG frame,
* get a new buffer */
if ((go->format == GO7007_FORMAT_MPEG1 ||
go->format == GO7007_FORMAT_MPEG2 ||
go->format == GO7007_FORMAT_MPEG4) &&
(buf[i] == seq_start_code ||
buf[i] == 0xB8 || /* GOP code */
buf[i] == frame_start_code)) {
if (go->active_buf == NULL || go->seen_frame)
frame_boundary(go);
if (buf[i] == frame_start_code) {
if (go->active_buf != NULL)
go->active_buf->frame_offset =
go->active_buf->offset;
go->seen_frame = 1;
} else {
go->seen_frame = 0;
}
}
/* Handle any special chunk types, or just write the
* start code to the (potentially new) buffer */
switch (buf[i]) {
case 0xF5: /* timestamp */
go->parse_length = 12;
go->state = STATE_UNPARSED;
break;
case 0xF6: /* vbi */
go->state = STATE_VBI_LEN_A;
break;
case 0xF8: /* MD map */
go->parse_length = 0;
memset(go->active_map, 0,
sizeof(go->active_map));
go->state = STATE_MODET_MAP;
break;
case 0xFF: /* Potential JPEG start code */
store_byte(go->active_buf, 0x00);
store_byte(go->active_buf, 0x00);
store_byte(go->active_buf, 0x01);
go->state = STATE_FF;
break;
default:
store_byte(go->active_buf, 0x00);
store_byte(go->active_buf, 0x00);
store_byte(go->active_buf, 0x01);
store_byte(go->active_buf, buf[i]);
go->state = STATE_DATA;
break;
}
break;
case STATE_FF:
switch (buf[i]) {
case 0x00:
store_byte(go->active_buf, 0xFF);
go->state = STATE_00;
break;
case 0xFF:
store_byte(go->active_buf, 0xFF);
/* go->state remains STATE_FF */
break;
case 0xD8:
if (go->format == GO7007_FORMAT_MJPEG)
frame_boundary(go);
/* fall through */
default:
store_byte(go->active_buf, 0xFF);
store_byte(go->active_buf, buf[i]);
go->state = STATE_DATA;
break;
}
break;
case STATE_VBI_LEN_A:
go->parse_length = buf[i] << 8;
go->state = STATE_VBI_LEN_B;
break;
case STATE_VBI_LEN_B:
go->parse_length |= buf[i];
if (go->parse_length > 0)
go->state = STATE_UNPARSED;
else
go->state = STATE_DATA;
break;
case STATE_MODET_MAP:
if (go->parse_length < 204) {
if (go->parse_length & 1) {
go->modet_word |= buf[i];
write_bitmap_word(go);
} else
go->modet_word = buf[i] << 8;
} else if (go->parse_length == 207 && go->active_buf) {
go->active_buf->modet_active = buf[i];
}
if (++go->parse_length == 208)
go->state = STATE_DATA;
break;
case STATE_UNPARSED:
if (--go->parse_length == 0)
go->state = STATE_DATA;
break;
}
}
spin_unlock(&go->spinlock);
}
EXPORT_SYMBOL(go7007_parse_video_stream);
/*
* Allocate a new go7007 struct. Used by the hardware-specific probe.
*/
struct go7007 *go7007_alloc(struct go7007_board_info *board, struct device *dev)
{
struct go7007 *go;
int i;
go = kmalloc(sizeof(struct go7007), GFP_KERNEL);
if (go == NULL)
return NULL;
go->dev = dev;
go->board_info = board;
go->board_id = 0;
go->tuner_type = -1;
go->channel_number = 0;
go->name[0] = 0;
init_MUTEX(&go->hw_lock);
init_waitqueue_head(&go->frame_waitq);
spin_lock_init(&go->spinlock);
go->video_dev = NULL;
go->ref_count = 0;
go->status = STATUS_INIT;
memset(&go->i2c_adapter, 0, sizeof(go->i2c_adapter));
go->i2c_adapter_online = 0;
go->interrupt_available = 0;
init_waitqueue_head(&go->interrupt_waitq);
go->in_use = 0;
go->input = 0;
if (board->sensor_flags & GO7007_SENSOR_TV) {
go->standard = GO7007_STD_NTSC;
go->width = 720;
go->height = 480;
go->sensor_framerate = 30000;
} else {
go->standard = GO7007_STD_OTHER;
go->width = board->sensor_width;
go->height = board->sensor_height;
go->sensor_framerate = board->sensor_framerate;
}
go->encoder_v_offset = board->sensor_v_offset;
go->encoder_h_offset = board->sensor_h_offset;
go->encoder_h_halve = 0;
go->encoder_v_halve = 0;
go->encoder_subsample = 0;
go->streaming = 0;
go->format = GO7007_FORMAT_MJPEG;
go->bitrate = 1500000;
go->fps_scale = 1;
go->pali = 0;
go->aspect_ratio = GO7007_RATIO_1_1;
go->gop_size = 0;
go->ipb = 0;
go->closed_gop = 0;
go->repeat_seqhead = 0;
go->seq_header_enable = 0;
go->gop_header_enable = 0;
go->dvd_mode = 0;
go->interlace_coding = 0;
for (i = 0; i < 4; ++i)
go->modet[i].enable = 0;;
for (i = 0; i < 1624; ++i)
go->modet_map[i] = 0;
go->audio_deliver = NULL;
go->audio_enabled = 0;
INIT_LIST_HEAD(&go->stream);
return go;
}
EXPORT_SYMBOL(go7007_alloc);
/*
* Detach and unregister the encoder. The go7007 struct won't be freed
* until v4l2 finishes releasing its resources and all associated fds are
* closed by applications.
*/
void go7007_remove(struct go7007 *go)
{
if (go->i2c_adapter_online) {
if (i2c_del_adapter(&go->i2c_adapter) == 0)
go->i2c_adapter_online = 0;
else
printk(KERN_ERR
"go7007: error removing I2C adapter!\n");
}
if (go->audio_enabled)
go7007_snd_remove(go);
go7007_v4l2_remove(go);
}
EXPORT_SYMBOL(go7007_remove);
MODULE_LICENSE("GPL v2");