blob: 686695b155c7af9899864c5d3103e3cfd49624b8 [file] [log] [blame]
/*
* SAS Transport Layer for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt2sas/mpt2_transport.c
* Copyright (C) 2007-2008 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_sas.h>
#include <scsi/scsi_dbg.h>
#include "mpt2sas_base.h"
/**
* _transport_sas_node_find_by_handle - sas node search
* @ioc: per adapter object
* @handle: expander or hba handle (assigned by firmware)
* Context: Calling function should acquire ioc->sas_node_lock.
*
* Search for either hba phys or expander device based on handle, then returns
* the sas_node object.
*/
static struct _sas_node *
_transport_sas_node_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
{
int i;
for (i = 0; i < ioc->sas_hba.num_phys; i++)
if (ioc->sas_hba.phy[i].handle == handle)
return &ioc->sas_hba;
return mpt2sas_scsih_expander_find_by_handle(ioc, handle);
}
/**
* _transport_convert_phy_link_rate -
* @link_rate: link rate returned from mpt firmware
*
* Convert link_rate from mpi fusion into sas_transport form.
*/
static enum sas_linkrate
_transport_convert_phy_link_rate(u8 link_rate)
{
enum sas_linkrate rc;
switch (link_rate) {
case MPI2_SAS_NEG_LINK_RATE_1_5:
rc = SAS_LINK_RATE_1_5_GBPS;
break;
case MPI2_SAS_NEG_LINK_RATE_3_0:
rc = SAS_LINK_RATE_3_0_GBPS;
break;
case MPI2_SAS_NEG_LINK_RATE_6_0:
rc = SAS_LINK_RATE_6_0_GBPS;
break;
case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED:
rc = SAS_PHY_DISABLED;
break;
case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED:
rc = SAS_LINK_RATE_FAILED;
break;
case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR:
rc = SAS_SATA_PORT_SELECTOR;
break;
case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS:
rc = SAS_PHY_RESET_IN_PROGRESS;
break;
default:
case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE:
case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE:
rc = SAS_LINK_RATE_UNKNOWN;
break;
}
return rc;
}
/**
* _transport_set_identify - set identify for phys and end devices
* @ioc: per adapter object
* @handle: device handle
* @identify: sas identify info
*
* Populates sas identify info.
*
* Returns 0 for success, non-zero for failure.
*/
static int
_transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle,
struct sas_identify *identify)
{
Mpi2SasDevicePage0_t sas_device_pg0;
Mpi2ConfigReply_t mpi_reply;
u32 device_info;
u32 ioc_status;
if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return -1;
}
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
"\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
__FILE__, __LINE__, __func__);
return -1;
}
memset(identify, 0, sizeof(identify));
device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
/* sas_address */
identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
/* device_type */
switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
case MPI2_SAS_DEVICE_INFO_NO_DEVICE:
identify->device_type = SAS_PHY_UNUSED;
break;
case MPI2_SAS_DEVICE_INFO_END_DEVICE:
identify->device_type = SAS_END_DEVICE;
break;
case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER:
identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
break;
case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER:
identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
break;
}
/* initiator_port_protocols */
if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR)
identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR)
identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR)
identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST)
identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
/* target_port_protocols */
if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET)
identify->target_port_protocols |= SAS_PROTOCOL_SSP;
if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
identify->target_port_protocols |= SAS_PROTOCOL_STP;
if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET)
identify->target_port_protocols |= SAS_PROTOCOL_SMP;
if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
identify->target_port_protocols |= SAS_PROTOCOL_SATA;
return 0;
}
/**
* mpt2sas_transport_done - internal transport layer callback handler.
* @ioc: per adapter object
* @smid: system request message index
* @VF_ID: virtual function id
* @reply: reply message frame(lower 32bit addr)
*
* Callback handler when sending internal generated transport cmds.
* The callback index passed is `ioc->transport_cb_idx`
*
* Return nothing.
*/
void
mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (ioc->transport_cmds.status == MPT2_CMD_NOT_USED)
return;
if (ioc->transport_cmds.smid != smid)
return;
ioc->transport_cmds.status |= MPT2_CMD_COMPLETE;
if (mpi_reply) {
memcpy(ioc->transport_cmds.reply, mpi_reply,
mpi_reply->MsgLength*4);
ioc->transport_cmds.status |= MPT2_CMD_REPLY_VALID;
}
ioc->transport_cmds.status &= ~MPT2_CMD_PENDING;
complete(&ioc->transport_cmds.done);
}
/* report manufacture request structure */
struct rep_manu_request{
u8 smp_frame_type;
u8 function;
u8 reserved;
u8 request_length;
};
/* report manufacture reply structure */
struct rep_manu_reply{
u8 smp_frame_type; /* 0x41 */
u8 function; /* 0x01 */
u8 function_result;
u8 response_length;
u16 expander_change_count;
u8 reserved0[2];
u8 sas_format:1;
u8 reserved1:7;
u8 reserved2[3];
u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN];
u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN];
u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN];
u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN];
u16 component_id;
u8 component_revision_id;
u8 reserved3;
u8 vendor_specific[8];
};
/**
* _transport_expander_report_manufacture - obtain SMP report_manufacture
* @ioc: per adapter object
* @sas_address: expander sas address
* @edev: the sas_expander_device object
*
* Fills in the sas_expander_device object when SMP port is created.
*
* Returns 0 for success, non-zero for failure.
*/
static int
_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
u64 sas_address, struct sas_expander_device *edev)
{
Mpi2SmpPassthroughRequest_t *mpi_request;
Mpi2SmpPassthroughReply_t *mpi_reply;
struct rep_manu_reply *manufacture_reply;
struct rep_manu_request *manufacture_request;
int rc;
u16 smid;
u32 ioc_state;
unsigned long timeleft;
void *psge;
u32 sgl_flags;
u8 issue_reset = 0;
unsigned long flags;
void *data_out = NULL;
dma_addr_t data_out_dma;
u32 sz;
u64 *sas_address_le;
u16 wait_state_count;
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
if (ioc->ioc_reset_in_progress) {
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
__func__, ioc->name);
return -EFAULT;
}
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
mutex_lock(&ioc->transport_cmds.mutex);
if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
ioc->transport_cmds.status = MPT2_CMD_PENDING;
wait_state_count = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
if (wait_state_count++ == 10) {
printk(MPT2SAS_ERR_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
rc = -EFAULT;
goto out;
}
ssleep(1);
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
printk(MPT2SAS_INFO_FMT "%s: waiting for "
"operational state(count=%d)\n", ioc->name,
__func__, wait_state_count);
}
if (wait_state_count)
printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
ioc->name, __func__);
smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
rc = 0;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->transport_cmds.smid = smid;
sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply);
data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma);
if (!data_out) {
printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
rc = -ENOMEM;
mpt2sas_base_free_smid(ioc, smid);
goto out;
}
manufacture_request = data_out;
manufacture_request->smp_frame_type = 0x40;
manufacture_request->function = 1;
manufacture_request->reserved = 0;
manufacture_request->request_length = 0;
memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
mpi_request->PhysicalPort = 0xFF;
sas_address_le = (u64 *)&mpi_request->SASAddress;
*sas_address_le = cpu_to_le64(sas_address);
mpi_request->RequestDataLength = sizeof(struct rep_manu_request);
psge = &mpi_request->SGL;
/* WRITE sgel first */
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
ioc->base_add_sg_single(psge, sgl_flags |
sizeof(struct rep_manu_request), data_out_dma);
/* incr sgel */
psge += ioc->sge_size;
/* READ sgel last */
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
ioc->base_add_sg_single(psge, sgl_flags |
sizeof(struct rep_manu_reply), data_out_dma +
sizeof(struct rep_manu_request));
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - "
"send to sas_addr(0x%016llx)\n", ioc->name,
(unsigned long long)sas_address));
mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */);
timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
10*HZ);
if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2SmpPassthroughRequest_t)/4);
if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
issue_reset = 1;
goto issue_host_reset;
}
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - "
"complete\n", ioc->name));
if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
u8 *tmp;
mpi_reply = ioc->transport_cmds.reply;
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"report_manufacture - reply data transfer size(%d)\n",
ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength)));
if (le16_to_cpu(mpi_reply->ResponseDataLength) !=
sizeof(struct rep_manu_reply))
goto out;
manufacture_reply = data_out + sizeof(struct rep_manu_request);
strncpy(edev->vendor_id, manufacture_reply->vendor_id,
SAS_EXPANDER_VENDOR_ID_LEN);
strncpy(edev->product_id, manufacture_reply->product_id,
SAS_EXPANDER_PRODUCT_ID_LEN);
strncpy(edev->product_rev, manufacture_reply->product_rev,
SAS_EXPANDER_PRODUCT_REV_LEN);
edev->level = manufacture_reply->sas_format;
if (manufacture_reply->sas_format) {
strncpy(edev->component_vendor_id,
manufacture_reply->component_vendor_id,
SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
tmp = (u8 *)&manufacture_reply->component_id;
edev->component_id = tmp[0] << 8 | tmp[1];
edev->component_revision_id =
manufacture_reply->component_revision_id;
}
} else
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"report_manufacture - no reply\n", ioc->name));
issue_host_reset:
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
out:
ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
if (data_out)
pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma);
mutex_unlock(&ioc->transport_cmds.mutex);
return rc;
}
/**
* mpt2sas_transport_port_add - insert port to the list
* @ioc: per adapter object
* @handle: handle of attached device
* @parent_handle: parent handle(either hba or expander)
* Context: This function will acquire ioc->sas_node_lock.
*
* Adding new port object to the sas_node->sas_port_list.
*
* Returns mpt2sas_port.
*/
struct _sas_port *
mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle,
u16 parent_handle)
{
struct _sas_phy *mpt2sas_phy, *next;
struct _sas_port *mpt2sas_port;
unsigned long flags;
struct _sas_node *sas_node;
struct sas_rphy *rphy;
int i;
struct sas_port *port;
if (!parent_handle)
return NULL;
mpt2sas_port = kzalloc(sizeof(struct _sas_port),
GFP_KERNEL);
if (!mpt2sas_port) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return NULL;
}
INIT_LIST_HEAD(&mpt2sas_port->port_list);
INIT_LIST_HEAD(&mpt2sas_port->phy_list);
spin_lock_irqsave(&ioc->sas_node_lock, flags);
sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_node) {
printk(MPT2SAS_ERR_FMT "%s: Could not find parent(0x%04x)!\n",
ioc->name, __func__, parent_handle);
goto out_fail;
}
mpt2sas_port->handle = parent_handle;
mpt2sas_port->sas_address = sas_node->sas_address;
if ((_transport_set_identify(ioc, handle,
&mpt2sas_port->remote_identify))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out_fail;
}
if (mpt2sas_port->remote_identify.device_type == SAS_PHY_UNUSED) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out_fail;
}
for (i = 0; i < sas_node->num_phys; i++) {
if (sas_node->phy[i].remote_identify.sas_address !=
mpt2sas_port->remote_identify.sas_address)
continue;
list_add_tail(&sas_node->phy[i].port_siblings,
&mpt2sas_port->phy_list);
mpt2sas_port->num_phys++;
}
if (!mpt2sas_port->num_phys) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out_fail;
}
port = sas_port_alloc_num(sas_node->parent_dev);
if ((sas_port_add(port))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out_fail;
}
list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list,
port_siblings) {
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &port->dev, "add: handle(0x%04x)"
", sas_addr(0x%016llx), phy(%d)\n", handle,
(unsigned long long)
mpt2sas_port->remote_identify.sas_address,
mpt2sas_phy->phy_id);
sas_port_add_phy(port, mpt2sas_phy->phy);
}
mpt2sas_port->port = port;
if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE)
rphy = sas_end_device_alloc(port);
else
rphy = sas_expander_alloc(port,
mpt2sas_port->remote_identify.device_type);
rphy->identify = mpt2sas_port->remote_identify;
if ((sas_rphy_add(rphy))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
}
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &rphy->dev, "add: handle(0x%04x), "
"sas_addr(0x%016llx)\n", handle,
(unsigned long long)
mpt2sas_port->remote_identify.sas_address);
mpt2sas_port->rphy = rphy;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
list_add_tail(&mpt2sas_port->port_list, &sas_node->sas_port_list);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
/* fill in report manufacture */
if (mpt2sas_port->remote_identify.device_type ==
MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
mpt2sas_port->remote_identify.device_type ==
MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
_transport_expander_report_manufacture(ioc,
mpt2sas_port->remote_identify.sas_address,
rphy_to_expander_device(rphy));
return mpt2sas_port;
out_fail:
list_for_each_entry_safe(mpt2sas_phy, next, &mpt2sas_port->phy_list,
port_siblings)
list_del(&mpt2sas_phy->port_siblings);
kfree(mpt2sas_port);
return NULL;
}
/**
* mpt2sas_transport_port_remove - remove port from the list
* @ioc: per adapter object
* @sas_address: sas address of attached device
* @parent_handle: handle to the upstream parent(either hba or expander)
* Context: This function will acquire ioc->sas_node_lock.
*
* Removing object and freeing associated memory from the
* ioc->sas_port_list.
*
* Return nothing.
*/
void
mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
u16 parent_handle)
{
int i;
unsigned long flags;
struct _sas_port *mpt2sas_port, *next;
struct _sas_node *sas_node;
u8 found = 0;
struct _sas_phy *mpt2sas_phy, *next_phy;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_node)
return;
list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list,
port_list) {
if (mpt2sas_port->remote_identify.sas_address != sas_address)
continue;
found = 1;
list_del(&mpt2sas_port->port_list);
goto out;
}
out:
if (!found)
return;
for (i = 0; i < sas_node->num_phys; i++) {
if (sas_node->phy[i].remote_identify.sas_address == sas_address)
memset(&sas_node->phy[i].remote_identify, 0 ,
sizeof(struct sas_identify));
}
list_for_each_entry_safe(mpt2sas_phy, next_phy,
&mpt2sas_port->phy_list, port_siblings) {
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &mpt2sas_port->port->dev,
"remove: parent_handle(0x%04x), "
"sas_addr(0x%016llx), phy(%d)\n", parent_handle,
(unsigned long long)
mpt2sas_port->remote_identify.sas_address,
mpt2sas_phy->phy_id);
sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy);
list_del(&mpt2sas_phy->port_siblings);
}
sas_port_delete(mpt2sas_port->port);
kfree(mpt2sas_port);
}
/**
* mpt2sas_transport_add_host_phy - report sas_host phy to transport
* @ioc: per adapter object
* @mpt2sas_phy: mpt2sas per phy object
* @phy_pg0: sas phy page 0
* @parent_dev: parent device class object
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
*mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev)
{
struct sas_phy *phy;
int phy_index = mpt2sas_phy->phy_id;
INIT_LIST_HEAD(&mpt2sas_phy->port_siblings);
phy = sas_phy_alloc(parent_dev, phy_index);
if (!phy) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return -1;
}
if ((_transport_set_identify(ioc, mpt2sas_phy->handle,
&mpt2sas_phy->identify))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return -1;
}
phy->identify = mpt2sas_phy->identify;
mpt2sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle);
if (mpt2sas_phy->attached_handle)
_transport_set_identify(ioc, mpt2sas_phy->attached_handle,
&mpt2sas_phy->remote_identify);
phy->identify.phy_identifier = mpt2sas_phy->phy_id;
phy->negotiated_linkrate = _transport_convert_phy_link_rate(
phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
phy_pg0.HwLinkRate >> 4);
phy->minimum_linkrate = _transport_convert_phy_link_rate(
phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
phy->maximum_linkrate = _transport_convert_phy_link_rate(
phy_pg0.ProgrammedLinkRate >> 4);
if ((sas_phy_add(phy))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
sas_phy_free(phy);
return -1;
}
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &phy->dev,
"add: handle(0x%04x), sas_addr(0x%016llx)\n"
"\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
mpt2sas_phy->handle, (unsigned long long)
mpt2sas_phy->identify.sas_address,
mpt2sas_phy->attached_handle,
(unsigned long long)
mpt2sas_phy->remote_identify.sas_address);
mpt2sas_phy->phy = phy;
return 0;
}
/**
* mpt2sas_transport_add_expander_phy - report expander phy to transport
* @ioc: per adapter object
* @mpt2sas_phy: mpt2sas per phy object
* @expander_pg1: expander page 1
* @parent_dev: parent device class object
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
*mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev)
{
struct sas_phy *phy;
int phy_index = mpt2sas_phy->phy_id;
INIT_LIST_HEAD(&mpt2sas_phy->port_siblings);
phy = sas_phy_alloc(parent_dev, phy_index);
if (!phy) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return -1;
}
if ((_transport_set_identify(ioc, mpt2sas_phy->handle,
&mpt2sas_phy->identify))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return -1;
}
phy->identify = mpt2sas_phy->identify;
mpt2sas_phy->attached_handle =
le16_to_cpu(expander_pg1.AttachedDevHandle);
if (mpt2sas_phy->attached_handle)
_transport_set_identify(ioc, mpt2sas_phy->attached_handle,
&mpt2sas_phy->remote_identify);
phy->identify.phy_identifier = mpt2sas_phy->phy_id;
phy->negotiated_linkrate = _transport_convert_phy_link_rate(
expander_pg1.NegotiatedLinkRate &
MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
phy->minimum_linkrate_hw = _transport_convert_phy_link_rate(
expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK);
phy->maximum_linkrate_hw = _transport_convert_phy_link_rate(
expander_pg1.HwLinkRate >> 4);
phy->minimum_linkrate = _transport_convert_phy_link_rate(
expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
phy->maximum_linkrate = _transport_convert_phy_link_rate(
expander_pg1.ProgrammedLinkRate >> 4);
if ((sas_phy_add(phy))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
sas_phy_free(phy);
return -1;
}
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &phy->dev,
"add: handle(0x%04x), sas_addr(0x%016llx)\n"
"\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
mpt2sas_phy->handle, (unsigned long long)
mpt2sas_phy->identify.sas_address,
mpt2sas_phy->attached_handle,
(unsigned long long)
mpt2sas_phy->remote_identify.sas_address);
mpt2sas_phy->phy = phy;
return 0;
}
/**
* mpt2sas_transport_update_phy_link_change - refreshing phy link changes and attached devices
* @ioc: per adapter object
* @handle: handle to sas_host or expander
* @attached_handle: attached device handle
* @phy_numberv: phy number
* @link_rate: new link rate
*
* Returns nothing.
*/
void
mpt2sas_transport_update_phy_link_change(struct MPT2SAS_ADAPTER *ioc,
u16 handle, u16 attached_handle, u8 phy_number, u8 link_rate)
{
unsigned long flags;
struct _sas_node *sas_node;
struct _sas_phy *mpt2sas_phy;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
sas_node = _transport_sas_node_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_node)
return;
mpt2sas_phy = &sas_node->phy[phy_number];
mpt2sas_phy->attached_handle = attached_handle;
if (attached_handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5))
_transport_set_identify(ioc, mpt2sas_phy->attached_handle,
&mpt2sas_phy->remote_identify);
else
memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct
sas_identify));
if (mpt2sas_phy->phy)
mpt2sas_phy->phy->negotiated_linkrate =
_transport_convert_phy_link_rate(link_rate);
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
"refresh: handle(0x%04x), sas_addr(0x%016llx),\n"
"\tlink_rate(0x%02x), phy(%d)\n"
"\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
handle, (unsigned long long)
mpt2sas_phy->identify.sas_address, link_rate,
phy_number, attached_handle,
(unsigned long long)
mpt2sas_phy->remote_identify.sas_address);
}
static inline void *
phy_to_ioc(struct sas_phy *phy)
{
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
return shost_priv(shost);
}
static inline void *
rphy_to_ioc(struct sas_rphy *rphy)
{
struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
return shost_priv(shost);
}
/**
* _transport_get_linkerrors -
* @phy: The sas phy object
*
* Only support sas_host direct attached phys.
* Returns 0 for success, non-zero for failure.
*
*/
static int
_transport_get_linkerrors(struct sas_phy *phy)
{
struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
struct _sas_phy *mpt2sas_phy;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasPhyPage1_t phy_pg1;
int i;
for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys &&
!mpt2sas_phy; i++) {
if (ioc->sas_hba.phy[i].phy != phy)
continue;
mpt2sas_phy = &ioc->sas_hba.phy[i];
}
if (!mpt2sas_phy) /* this phy not on sas_host */
return -EINVAL;
if ((mpt2sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1,
mpt2sas_phy->phy_id))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return -ENXIO;
}
if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status"
"(0x%04x), loginfo(0x%08x)\n", ioc->name,
mpt2sas_phy->phy_id,
le16_to_cpu(mpi_reply.IOCStatus),
le32_to_cpu(mpi_reply.IOCLogInfo));
phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount);
phy->running_disparity_error_count =
le32_to_cpu(phy_pg1.RunningDisparityErrorCount);
phy->loss_of_dword_sync_count =
le32_to_cpu(phy_pg1.LossDwordSynchCount);
phy->phy_reset_problem_count =
le32_to_cpu(phy_pg1.PhyResetProblemCount);
return 0;
}
/**
* _transport_get_enclosure_identifier -
* @phy: The sas phy object
*
* Obtain the enclosure logical id for an expander.
* Returns 0 for success, non-zero for failure.
*/
static int
_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
{
struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
struct _sas_node *sas_expander;
unsigned long flags;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
rphy->identify.sas_address);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_expander)
return -ENXIO;
*identifier = sas_expander->enclosure_logical_id;
return 0;
}
/**
* _transport_get_bay_identifier -
* @phy: The sas phy object
*
* Returns the slot id for a device that resides inside an enclosure.
*/
static int
_transport_get_bay_identifier(struct sas_rphy *rphy)
{
struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
struct _sas_device *sas_device;
unsigned long flags;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
rphy->identify.sas_address);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!sas_device)
return -ENXIO;
return sas_device->slot;
}
/**
* _transport_phy_reset -
* @phy: The sas phy object
* @hard_reset:
*
* Only support sas_host direct attached phys.
* Returns 0 for success, non-zero for failure.
*/
static int
_transport_phy_reset(struct sas_phy *phy, int hard_reset)
{
struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
struct _sas_phy *mpt2sas_phy;
Mpi2SasIoUnitControlReply_t mpi_reply;
Mpi2SasIoUnitControlRequest_t mpi_request;
int i;
for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys &&
!mpt2sas_phy; i++) {
if (ioc->sas_hba.phy[i].phy != phy)
continue;
mpt2sas_phy = &ioc->sas_hba.phy[i];
}
if (!mpt2sas_phy) /* this phy not on sas_host */
return -EINVAL;
memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t));
mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
mpi_request.Operation = hard_reset ?
MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET;
mpi_request.PhyNum = mpt2sas_phy->phy_id;
if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
return -ENXIO;
}
if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo)
printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status"
"(0x%04x), loginfo(0x%08x)\n", ioc->name,
mpt2sas_phy->phy_id,
le16_to_cpu(mpi_reply.IOCStatus),
le32_to_cpu(mpi_reply.IOCLogInfo));
return 0;
}
/**
* _transport_smp_handler - transport portal for smp passthru
* @shost: shost object
* @rphy: sas transport rphy object
* @req:
*
* This used primarily for smp_utils.
* Example:
* smp_rep_general /sys/class/bsg/expander-5:0
*/
static int
_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
struct request *req)
{
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
Mpi2SmpPassthroughRequest_t *mpi_request;
Mpi2SmpPassthroughReply_t *mpi_reply;
int rc;
u16 smid;
u32 ioc_state;
unsigned long timeleft;
void *psge;
u32 sgl_flags;
u8 issue_reset = 0;
unsigned long flags;
dma_addr_t dma_addr_in = 0;
dma_addr_t dma_addr_out = 0;
u16 wait_state_count;
struct request *rsp = req->next_rq;
if (!rsp) {
printk(MPT2SAS_ERR_FMT "%s: the smp response space is "
"missing\n", ioc->name, __func__);
return -EINVAL;
}
/* do we need to support multiple segments? */
if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, "
"rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt,
blk_rq_bytes(req), rsp->bio->bi_vcnt, blk_rq_bytes(rsp));
return -EINVAL;
}
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
if (ioc->ioc_reset_in_progress) {
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
__func__, ioc->name);
return -EFAULT;
}
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex);
if (rc)
return rc;
if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", ioc->name,
__func__);
rc = -EAGAIN;
goto out;
}
ioc->transport_cmds.status = MPT2_CMD_PENDING;
wait_state_count = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
if (wait_state_count++ == 10) {
printk(MPT2SAS_ERR_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
rc = -EFAULT;
goto out;
}
ssleep(1);
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
printk(MPT2SAS_INFO_FMT "%s: waiting for "
"operational state(count=%d)\n", ioc->name,
__func__, wait_state_count);
}
if (wait_state_count)
printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
ioc->name, __func__);
smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
rc = 0;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->transport_cmds.smid = smid;
memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
mpi_request->PhysicalPort = 0xFF;
*((u64 *)&mpi_request->SASAddress) = (rphy) ?
cpu_to_le64(rphy->identify.sas_address) :
cpu_to_le64(ioc->sas_hba.sas_address);
mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
psge = &mpi_request->SGL;
/* WRITE sgel first */
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_out) {
mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
goto unmap;
}
ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(req) - 4),
dma_addr_out);
/* incr sgel */
psge += ioc->sge_size;
/* READ sgel last */
sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST);
sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_in) {
mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
goto unmap;
}
ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(rsp) + 4),
dma_addr_in);
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - "
"sending smp request\n", ioc->name, __func__));
mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */);
timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
10*HZ);
if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s : timeout\n",
__func__, ioc->name);
_debug_dump_mf(mpi_request,
sizeof(Mpi2SmpPassthroughRequest_t)/4);
if (!(ioc->transport_cmds.status & MPT2_CMD_RESET))
issue_reset = 1;
goto issue_host_reset;
}
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - "
"complete\n", ioc->name, __func__));
if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) {
mpi_reply = ioc->transport_cmds.reply;
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"%s - reply data transfer size(%d)\n",
ioc->name, __func__,
le16_to_cpu(mpi_reply->ResponseDataLength)));
memcpy(req->sense, mpi_reply, sizeof(*mpi_reply));
req->sense_len = sizeof(*mpi_reply);
req->resid_len = 0;
rsp->resid_len -= mpi_reply->ResponseDataLength;
} else {
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"%s - no reply\n", ioc->name, __func__));
rc = -ENXIO;
}
issue_host_reset:
if (issue_reset) {
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
rc = -ETIMEDOUT;
}
unmap:
if (dma_addr_out)
pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
PCI_DMA_BIDIRECTIONAL);
if (dma_addr_in)
pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
PCI_DMA_BIDIRECTIONAL);
out:
ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
mutex_unlock(&ioc->transport_cmds.mutex);
return rc;
}
struct sas_function_template mpt2sas_transport_functions = {
.get_linkerrors = _transport_get_linkerrors,
.get_enclosure_identifier = _transport_get_enclosure_identifier,
.get_bay_identifier = _transport_get_bay_identifier,
.phy_reset = _transport_phy_reset,
.smp_handler = _transport_smp_handler,
};
struct scsi_transport_template *mpt2sas_transport_template;