blob: 2b3a055059ea6c2588f083fbfda5a24e43d7c807 [file] [log] [blame]
/*
* Driver for ST5481 USB ISDN modem
*
* Author Frode Isaksen
* Copyright 2001 by Frode Isaksen <fisaksen@bewan.com>
* 2001 by Kai Germaschewski <kai.germaschewski@gmx.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*/
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/slab.h>
#include "st5481.h"
static int st5481_isoc_flatten(struct urb *urb);
/* ======================================================================
* control pipe
*/
/*
* Send the next endpoint 0 request stored in the FIFO.
* Called either by the completion or by usb_ctrl_msg.
*/
static void usb_next_ctrl_msg(struct urb *urb,
struct st5481_adapter *adapter)
{
struct st5481_ctrl *ctrl = &adapter->ctrl;
int r_index;
if (test_and_set_bit(0, &ctrl->busy)) {
return;
}
if ((r_index = fifo_remove(&ctrl->msg_fifo.f)) < 0) {
test_and_clear_bit(0,&ctrl->busy);
return;
}
urb->setup_packet =
(unsigned char *)&ctrl->msg_fifo.data[r_index];
DBG(1,"request=0x%02x,value=0x%04x,index=%x",
((struct ctrl_msg *)urb->setup_packet)->dr.bRequest,
((struct ctrl_msg *)urb->setup_packet)->dr.wValue,
((struct ctrl_msg *)urb->setup_packet)->dr.wIndex);
// Prepare the URB
urb->dev = adapter->usb_dev;
SUBMIT_URB(urb, GFP_ATOMIC);
}
/*
* Asynchronous endpoint 0 request (async version of usb_control_msg).
* The request will be queued up in a FIFO if the endpoint is busy.
*/
static void usb_ctrl_msg(struct st5481_adapter *adapter,
u8 request, u8 requesttype, u16 value, u16 index,
ctrl_complete_t complete, void *context)
{
struct st5481_ctrl *ctrl = &adapter->ctrl;
int w_index;
struct ctrl_msg *ctrl_msg;
if ((w_index = fifo_add(&ctrl->msg_fifo.f)) < 0) {
WARNING("control msg FIFO full");
return;
}
ctrl_msg = &ctrl->msg_fifo.data[w_index];
ctrl_msg->dr.bRequestType = requesttype;
ctrl_msg->dr.bRequest = request;
ctrl_msg->dr.wValue = cpu_to_le16p(&value);
ctrl_msg->dr.wIndex = cpu_to_le16p(&index);
ctrl_msg->dr.wLength = 0;
ctrl_msg->complete = complete;
ctrl_msg->context = context;
usb_next_ctrl_msg(ctrl->urb, adapter);
}
/*
* Asynchronous endpoint 0 device request.
*/
void st5481_usb_device_ctrl_msg(struct st5481_adapter *adapter,
u8 request, u16 value,
ctrl_complete_t complete, void *context)
{
usb_ctrl_msg(adapter, request,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, 0, complete, context);
}
/*
* Asynchronous pipe reset (async version of usb_clear_halt).
*/
void st5481_usb_pipe_reset(struct st5481_adapter *adapter,
u_char pipe,
ctrl_complete_t complete, void *context)
{
DBG(1,"pipe=%02x",pipe);
usb_ctrl_msg(adapter,
USB_REQ_CLEAR_FEATURE, USB_DIR_OUT | USB_RECIP_ENDPOINT,
0, pipe, complete, context);
}
/*
Physical level functions
*/
void st5481_ph_command(struct st5481_adapter *adapter, unsigned int command)
{
DBG(8,"command=%s", ST5481_CMD_string(command));
st5481_usb_device_ctrl_msg(adapter, TXCI, command, NULL, NULL);
}
/*
* The request on endpoint 0 has completed.
* Call the user provided completion routine and try
* to send the next request.
*/
static void usb_ctrl_complete(struct urb *urb)
{
struct st5481_adapter *adapter = urb->context;
struct st5481_ctrl *ctrl = &adapter->ctrl;
struct ctrl_msg *ctrl_msg;
if (unlikely(urb->status < 0)) {
switch (urb->status) {
case -ENOENT:
case -ESHUTDOWN:
case -ECONNRESET:
DBG(1,"urb killed status %d", urb->status);
return; // Give up
default:
WARNING("urb status %d",urb->status);
break;
}
}
ctrl_msg = (struct ctrl_msg *)urb->setup_packet;
if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
/* Special case handling for pipe reset */
le16_to_cpus(&ctrl_msg->dr.wIndex);
usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
}
if (ctrl_msg->complete)
ctrl_msg->complete(ctrl_msg->context);
clear_bit(0, &ctrl->busy);
// Try to send next control message
usb_next_ctrl_msg(urb, adapter);
return;
}
/* ======================================================================
* interrupt pipe
*/
/*
* The interrupt endpoint will be called when any
* of the 6 registers changes state (depending on masks).
* Decode the register values and schedule a private event.
* Called at interrupt.
*/
static void usb_int_complete(struct urb *urb)
{
u8 *data = urb->transfer_buffer;
u8 irqbyte;
struct st5481_adapter *adapter = urb->context;
int j;
int status;
switch (urb->status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
DBG(2, "urb shutting down with status: %d", urb->status);
return;
default:
WARNING("nonzero urb status received: %d", urb->status);
goto exit;
}
DBG_PACKET(2, data, INT_PKT_SIZE);
if (urb->actual_length == 0) {
goto exit;
}
irqbyte = data[MPINT];
if (irqbyte & DEN_INT)
FsmEvent(&adapter->d_out.fsm, EV_DOUT_DEN, NULL);
if (irqbyte & DCOLL_INT)
FsmEvent(&adapter->d_out.fsm, EV_DOUT_COLL, NULL);
irqbyte = data[FFINT_D];
if (irqbyte & OUT_UNDERRUN)
FsmEvent(&adapter->d_out.fsm, EV_DOUT_UNDERRUN, NULL);
if (irqbyte & OUT_DOWN)
;// printk("OUT_DOWN\n");
irqbyte = data[MPINT];
if (irqbyte & RXCI_INT)
FsmEvent(&adapter->l1m, data[CCIST] & 0x0f, NULL);
for (j = 0; j < 2; j++)
adapter->bcs[j].b_out.flow_event |= data[FFINT_B1 + j];
urb->actual_length = 0;
exit:
status = usb_submit_urb (urb, GFP_ATOMIC);
if (status)
WARNING("usb_submit_urb failed with result %d", status);
}
/* ======================================================================
* initialization
*/
int st5481_setup_usb(struct st5481_adapter *adapter)
{
struct usb_device *dev = adapter->usb_dev;
struct st5481_ctrl *ctrl = &adapter->ctrl;
struct st5481_intr *intr = &adapter->intr;
struct usb_interface *intf;
struct usb_host_interface *altsetting = NULL;
struct usb_host_endpoint *endpoint;
int status;
struct urb *urb;
u8 *buf;
DBG(2,"");
if ((status = usb_reset_configuration (dev)) < 0) {
WARNING("reset_configuration failed,status=%d",status);
return status;
}
intf = usb_ifnum_to_if(dev, 0);
if (intf)
altsetting = usb_altnum_to_altsetting(intf, 3);
if (!altsetting)
return -ENXIO;
// Check if the config is sane
if ( altsetting->desc.bNumEndpoints != 7 ) {
WARNING("expecting 7 got %d endpoints!", altsetting->desc.bNumEndpoints);
return -EINVAL;
}
// The descriptor is wrong for some early samples of the ST5481 chip
altsetting->endpoint[3].desc.wMaxPacketSize = __constant_cpu_to_le16(32);
altsetting->endpoint[4].desc.wMaxPacketSize = __constant_cpu_to_le16(32);
// Use alternative setting 3 on interface 0 to have 2B+D
if ((status = usb_set_interface (dev, 0, 3)) < 0) {
WARNING("usb_set_interface failed,status=%d",status);
return status;
}
// Allocate URB for control endpoint
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
return -ENOMEM;
}
ctrl->urb = urb;
// Fill the control URB
usb_fill_control_urb (urb, dev,
usb_sndctrlpipe(dev, 0),
NULL, NULL, 0, usb_ctrl_complete, adapter);
fifo_init(&ctrl->msg_fifo.f, ARRAY_SIZE(ctrl->msg_fifo.data));
// Allocate URBs and buffers for interrupt endpoint
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
return -ENOMEM;
}
intr->urb = urb;
buf = kmalloc(INT_PKT_SIZE, GFP_KERNEL);
if (!buf) {
return -ENOMEM;
}
endpoint = &altsetting->endpoint[EP_INT-1];
// Fill the interrupt URB
usb_fill_int_urb(urb, dev,
usb_rcvintpipe(dev, endpoint->desc.bEndpointAddress),
buf, INT_PKT_SIZE,
usb_int_complete, adapter,
endpoint->desc.bInterval);
return 0;
}
/*
* Release buffers and URBs for the interrupt and control
* endpoint.
*/
void st5481_release_usb(struct st5481_adapter *adapter)
{
struct st5481_intr *intr = &adapter->intr;
struct st5481_ctrl *ctrl = &adapter->ctrl;
DBG(1,"");
// Stop and free Control and Interrupt URBs
usb_kill_urb(ctrl->urb);
kfree(ctrl->urb->transfer_buffer);
usb_free_urb(ctrl->urb);
ctrl->urb = NULL;
usb_kill_urb(intr->urb);
kfree(intr->urb->transfer_buffer);
usb_free_urb(intr->urb);
intr->urb = NULL;
}
/*
* Initialize the adapter.
*/
void st5481_start(struct st5481_adapter *adapter)
{
static const u8 init_cmd_table[]={
SET_DEFAULT,0,
STT,0,
SDA_MIN,0x0d,
SDA_MAX,0x29,
SDELAY_VALUE,0x14,
GPIO_DIR,0x01,
GPIO_OUT,RED_LED,
// FFCTRL_OUT_D,4,
// FFCTRH_OUT_D,12,
FFCTRL_OUT_B1,6,
FFCTRH_OUT_B1,20,
FFCTRL_OUT_B2,6,
FFCTRH_OUT_B2,20,
MPMSK,RXCI_INT+DEN_INT+DCOLL_INT,
0
};
struct st5481_intr *intr = &adapter->intr;
int i = 0;
u8 request,value;
DBG(8,"");
adapter->leds = RED_LED;
// Start receiving on the interrupt endpoint
SUBMIT_URB(intr->urb, GFP_KERNEL);
while ((request = init_cmd_table[i++])) {
value = init_cmd_table[i++];
st5481_usb_device_ctrl_msg(adapter, request, value, NULL, NULL);
}
st5481_ph_command(adapter, ST5481_CMD_PUP);
}
/*
* Reset the adapter to default values.
*/
void st5481_stop(struct st5481_adapter *adapter)
{
DBG(8,"");
st5481_usb_device_ctrl_msg(adapter, SET_DEFAULT, 0, NULL, NULL);
}
/* ======================================================================
* isochronous USB helpers
*/
static void
fill_isoc_urb(struct urb *urb, struct usb_device *dev,
unsigned int pipe, void *buf, int num_packets,
int packet_size, usb_complete_t complete,
void *context)
{
int k;
urb->dev=dev;
urb->pipe=pipe;
urb->interval = 1;
urb->transfer_buffer=buf;
urb->number_of_packets = num_packets;
urb->transfer_buffer_length=num_packets*packet_size;
urb->actual_length = 0;
urb->complete=complete;
urb->context=context;
urb->transfer_flags=URB_ISO_ASAP;
for (k = 0; k < num_packets; k++) {
urb->iso_frame_desc[k].offset = packet_size * k;
urb->iso_frame_desc[k].length = packet_size;
urb->iso_frame_desc[k].actual_length = 0;
}
}
int
st5481_setup_isocpipes(struct urb* urb[2], struct usb_device *dev,
unsigned int pipe, int num_packets,
int packet_size, int buf_size,
usb_complete_t complete, void *context)
{
int j, retval;
unsigned char *buf;
for (j = 0; j < 2; j++) {
retval = -ENOMEM;
urb[j] = usb_alloc_urb(num_packets, GFP_KERNEL);
if (!urb[j])
goto err;
// Allocate memory for 2000bytes/sec (16Kb/s)
buf = kmalloc(buf_size, GFP_KERNEL);
if (!buf)
goto err;
// Fill the isochronous URB
fill_isoc_urb(urb[j], dev, pipe, buf,
num_packets, packet_size, complete,
context);
}
return 0;
err:
for (j = 0; j < 2; j++) {
if (urb[j]) {
kfree(urb[j]->transfer_buffer);
urb[j]->transfer_buffer = NULL;
usb_free_urb(urb[j]);
urb[j] = NULL;
}
}
return retval;
}
void st5481_release_isocpipes(struct urb* urb[2])
{
int j;
for (j = 0; j < 2; j++) {
usb_kill_urb(urb[j]);
kfree(urb[j]->transfer_buffer);
usb_free_urb(urb[j]);
urb[j] = NULL;
}
}
/*
* Decode frames received on the B/D channel.
* Note that this function will be called continously
* with 64Kbit/s / 16Kbit/s of data and hence it will be
* called 50 times per second with 20 ISOC descriptors.
* Called at interrupt.
*/
static void usb_in_complete(struct urb *urb)
{
struct st5481_in *in = urb->context;
unsigned char *ptr;
struct sk_buff *skb;
int len, count, status;
if (unlikely(urb->status < 0)) {
switch (urb->status) {
case -ENOENT:
case -ESHUTDOWN:
case -ECONNRESET:
DBG(1,"urb killed status %d", urb->status);
return; // Give up
default:
WARNING("urb status %d",urb->status);
break;
}
}
DBG_ISO_PACKET(0x80,urb);
len = st5481_isoc_flatten(urb);
ptr = urb->transfer_buffer;
while (len > 0) {
if (in->mode == L1_MODE_TRANS) {
memcpy(in->rcvbuf, ptr, len);
status = len;
len = 0;
} else {
status = isdnhdlc_decode(&in->hdlc_state, ptr, len, &count,
in->rcvbuf, in->bufsize);
ptr += count;
len -= count;
}
if (status > 0) {
// Good frame received
DBG(4,"count=%d",status);
DBG_PACKET(0x400, in->rcvbuf, status);
if (!(skb = dev_alloc_skb(status))) {
WARNING("receive out of memory\n");
break;
}
memcpy(skb_put(skb, status), in->rcvbuf, status);
in->hisax_if->l1l2(in->hisax_if, PH_DATA | INDICATION, skb);
} else if (status == -HDLC_CRC_ERROR) {
INFO("CRC error");
} else if (status == -HDLC_FRAMING_ERROR) {
INFO("framing error");
} else if (status == -HDLC_LENGTH_ERROR) {
INFO("length error");
}
}
// Prepare URB for next transfer
urb->dev = in->adapter->usb_dev;
urb->actual_length = 0;
SUBMIT_URB(urb, GFP_ATOMIC);
}
int st5481_setup_in(struct st5481_in *in)
{
struct usb_device *dev = in->adapter->usb_dev;
int retval;
DBG(4,"");
in->rcvbuf = kmalloc(in->bufsize, GFP_KERNEL);
retval = -ENOMEM;
if (!in->rcvbuf)
goto err;
retval = st5481_setup_isocpipes(in->urb, dev,
usb_rcvisocpipe(dev, in->ep),
in->num_packets, in->packet_size,
in->num_packets * in->packet_size,
usb_in_complete, in);
if (retval)
goto err_free;
return 0;
err_free:
kfree(in->rcvbuf);
err:
return retval;
}
void st5481_release_in(struct st5481_in *in)
{
DBG(2,"");
st5481_release_isocpipes(in->urb);
}
/*
* Make the transfer_buffer contiguous by
* copying from the iso descriptors if necessary.
*/
static int st5481_isoc_flatten(struct urb *urb)
{
struct usb_iso_packet_descriptor *pipd,*pend;
unsigned char *src,*dst;
unsigned int len;
if (urb->status < 0) {
return urb->status;
}
for (pipd = &urb->iso_frame_desc[0],
pend = &urb->iso_frame_desc[urb->number_of_packets],
dst = urb->transfer_buffer;
pipd < pend;
pipd++) {
if (pipd->status < 0) {
return (pipd->status);
}
len = pipd->actual_length;
pipd->actual_length = 0;
src = urb->transfer_buffer+pipd->offset;
if (src != dst) {
// Need to copy since isoc buffers not full
while (len--) {
*dst++ = *src++;
}
} else {
// No need to copy, just update destination buffer
dst += len;
}
}
// Return size of flattened buffer
return (dst - (unsigned char *)urb->transfer_buffer);
}
static void st5481_start_rcv(void *context)
{
struct st5481_in *in = context;
struct st5481_adapter *adapter = in->adapter;
DBG(4,"");
in->urb[0]->dev = adapter->usb_dev;
SUBMIT_URB(in->urb[0], GFP_KERNEL);
in->urb[1]->dev = adapter->usb_dev;
SUBMIT_URB(in->urb[1], GFP_KERNEL);
}
void st5481_in_mode(struct st5481_in *in, int mode)
{
if (in->mode == mode)
return;
in->mode = mode;
usb_unlink_urb(in->urb[0]);
usb_unlink_urb(in->urb[1]);
if (in->mode != L1_MODE_NULL) {
if (in->mode != L1_MODE_TRANS)
isdnhdlc_rcv_init(&in->hdlc_state,
in->mode == L1_MODE_HDLC_56K);
st5481_usb_pipe_reset(in->adapter, in->ep, NULL, NULL);
st5481_usb_device_ctrl_msg(in->adapter, in->counter,
in->packet_size,
NULL, NULL);
st5481_start_rcv(in);
} else {
st5481_usb_device_ctrl_msg(in->adapter, in->counter,
0, NULL, NULL);
}
}