blob: e4b4e8898e39a20a451cd97a5b57b13d9e63561b [file] [log] [blame]
/*
* Copyright 2008 Intel Corporation <hong.liu@intel.com>
* Copyright 2008 Red Hat <mjg@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#include <linux/acpi.h>
#include <acpi/video.h>
#include "drmP.h"
#include "i915_drm.h"
#include "i915_drv.h"
#define PCI_ASLE 0xe4
#define PCI_LBPC 0xf4
#define PCI_ASLS 0xfc
#define OPREGION_SZ (8*1024)
#define OPREGION_HEADER_OFFSET 0
#define OPREGION_ACPI_OFFSET 0x100
#define OPREGION_SWSCI_OFFSET 0x200
#define OPREGION_ASLE_OFFSET 0x300
#define OPREGION_VBT_OFFSET 0x1000
#define OPREGION_SIGNATURE "IntelGraphicsMem"
#define MBOX_ACPI (1<<0)
#define MBOX_SWSCI (1<<1)
#define MBOX_ASLE (1<<2)
struct opregion_header {
u8 signature[16];
u32 size;
u32 opregion_ver;
u8 bios_ver[32];
u8 vbios_ver[16];
u8 driver_ver[16];
u32 mboxes;
u8 reserved[164];
} __attribute__((packed));
/* OpRegion mailbox #1: public ACPI methods */
struct opregion_acpi {
u32 drdy; /* driver readiness */
u32 csts; /* notification status */
u32 cevt; /* current event */
u8 rsvd1[20];
u32 didl[8]; /* supported display devices ID list */
u32 cpdl[8]; /* currently presented display list */
u32 cadl[8]; /* currently active display list */
u32 nadl[8]; /* next active devices list */
u32 aslp; /* ASL sleep time-out */
u32 tidx; /* toggle table index */
u32 chpd; /* current hotplug enable indicator */
u32 clid; /* current lid state*/
u32 cdck; /* current docking state */
u32 sxsw; /* Sx state resume */
u32 evts; /* ASL supported events */
u32 cnot; /* current OS notification */
u32 nrdy; /* driver status */
u8 rsvd2[60];
} __attribute__((packed));
/* OpRegion mailbox #2: SWSCI */
struct opregion_swsci {
u32 scic; /* SWSCI command|status|data */
u32 parm; /* command parameters */
u32 dslp; /* driver sleep time-out */
u8 rsvd[244];
} __attribute__((packed));
/* OpRegion mailbox #3: ASLE */
struct opregion_asle {
u32 ardy; /* driver readiness */
u32 aslc; /* ASLE interrupt command */
u32 tche; /* technology enabled indicator */
u32 alsi; /* current ALS illuminance reading */
u32 bclp; /* backlight brightness to set */
u32 pfit; /* panel fitting state */
u32 cblv; /* current brightness level */
u16 bclm[20]; /* backlight level duty cycle mapping table */
u32 cpfm; /* current panel fitting mode */
u32 epfm; /* enabled panel fitting modes */
u8 plut[74]; /* panel LUT and identifier */
u32 pfmb; /* PWM freq and min brightness */
u8 rsvd[102];
} __attribute__((packed));
/* ASLE irq request bits */
#define ASLE_SET_ALS_ILLUM (1 << 0)
#define ASLE_SET_BACKLIGHT (1 << 1)
#define ASLE_SET_PFIT (1 << 2)
#define ASLE_SET_PWM_FREQ (1 << 3)
#define ASLE_REQ_MSK 0xf
/* response bits of ASLE irq request */
#define ASLE_ALS_ILLUM_FAIL (2<<10)
#define ASLE_BACKLIGHT_FAIL (2<<12)
#define ASLE_PFIT_FAIL (2<<14)
#define ASLE_PWM_FREQ_FAIL (2<<16)
/* ASLE backlight brightness to set */
#define ASLE_BCLP_VALID (1<<31)
#define ASLE_BCLP_MSK (~(1<<31))
/* ASLE panel fitting request */
#define ASLE_PFIT_VALID (1<<31)
#define ASLE_PFIT_CENTER (1<<0)
#define ASLE_PFIT_STRETCH_TEXT (1<<1)
#define ASLE_PFIT_STRETCH_GFX (1<<2)
/* PWM frequency and minimum brightness */
#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
#define ASLE_PFMB_PWM_VALID (1<<31)
#define ASLE_CBLV_VALID (1<<31)
#define ACPI_OTHER_OUTPUT (0<<8)
#define ACPI_VGA_OUTPUT (1<<8)
#define ACPI_TV_OUTPUT (2<<8)
#define ACPI_DIGITAL_OUTPUT (3<<8)
#define ACPI_LVDS_OUTPUT (4<<8)
static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
u32 blc_pwm_ctl, blc_pwm_ctl2;
if (!(bclp & ASLE_BCLP_VALID))
return ASLE_BACKLIGHT_FAIL;
bclp &= ASLE_BCLP_MSK;
if (bclp < 0 || bclp > 255)
return ASLE_BACKLIGHT_FAIL;
blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2);
if (blc_pwm_ctl2 & BLM_COMBINATION_MODE)
pci_write_config_dword(dev->pdev, PCI_LBPC, bclp);
else
I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | ((bclp * 0x101)-1));
asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
return 0;
}
static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
{
/* alsi is the current ALS reading in lux. 0 indicates below sensor
range, 0xffff indicates above sensor range. 1-0xfffe are valid */
return 0;
}
static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (pfmb & ASLE_PFMB_PWM_VALID) {
u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
u32 pwm = pfmb & ASLE_PFMB_PWM_MASK;
blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK;
pwm = pwm >> 9;
/* FIXME - what do we do with the PWM? */
}
return 0;
}
static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
{
/* Panel fitting is currently controlled by the X code, so this is a
noop until modesetting support works fully */
if (!(pfit & ASLE_PFIT_VALID))
return ASLE_PFIT_FAIL;
return 0;
}
void opregion_asle_intr(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
u32 asle_stat = 0;
u32 asle_req;
if (!asle)
return;
asle_req = asle->aslc & ASLE_REQ_MSK;
if (!asle_req) {
DRM_DEBUG("non asle set request??\n");
return;
}
if (asle_req & ASLE_SET_ALS_ILLUM)
asle_stat |= asle_set_als_illum(dev, asle->alsi);
if (asle_req & ASLE_SET_BACKLIGHT)
asle_stat |= asle_set_backlight(dev, asle->bclp);
if (asle_req & ASLE_SET_PFIT)
asle_stat |= asle_set_pfit(dev, asle->pfit);
if (asle_req & ASLE_SET_PWM_FREQ)
asle_stat |= asle_set_pwm_freq(dev, asle->pfmb);
asle->aslc = asle_stat;
}
#define ASLE_ALS_EN (1<<0)
#define ASLE_BLC_EN (1<<1)
#define ASLE_PFIT_EN (1<<2)
#define ASLE_PFMB_EN (1<<3)
void opregion_enable_asle(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
if (asle) {
if (IS_MOBILE(dev)) {
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
i915_enable_pipestat(dev_priv, 1,
I915_LEGACY_BLC_EVENT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock,
irqflags);
}
asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
ASLE_PFMB_EN;
asle->ardy = 1;
}
}
#define ACPI_EV_DISPLAY_SWITCH (1<<0)
#define ACPI_EV_LID (1<<1)
#define ACPI_EV_DOCK (1<<2)
static struct intel_opregion *system_opregion;
static int intel_opregion_video_event(struct notifier_block *nb,
unsigned long val, void *data)
{
/* The only video events relevant to opregion are 0x80. These indicate
either a docking event, lid switch or display switch request. In
Linux, these are handled by the dock, button and video drivers.
We might want to fix the video driver to be opregion-aware in
future, but right now we just indicate to the firmware that the
request has been handled */
struct opregion_acpi *acpi;
if (!system_opregion)
return NOTIFY_DONE;
acpi = system_opregion->acpi;
acpi->csts = 0;
return NOTIFY_OK;
}
static struct notifier_block intel_opregion_notifier = {
.notifier_call = intel_opregion_video_event,
};
/*
* Initialise the DIDL field in opregion. This passes a list of devices to
* the firmware. Values are defined by section B.4.2 of the ACPI specification
* (version 3)
*/
static void intel_didl_outputs(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_opregion *opregion = &dev_priv->opregion;
struct drm_connector *connector;
int i = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
int output_type = ACPI_OTHER_OUTPUT;
if (i >= 8) {
dev_printk (KERN_ERR, &dev->pdev->dev,
"More than 8 outputs detected\n");
return;
}
switch (connector->connector_type) {
case DRM_MODE_CONNECTOR_VGA:
case DRM_MODE_CONNECTOR_DVIA:
output_type = ACPI_VGA_OUTPUT;
break;
case DRM_MODE_CONNECTOR_Composite:
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Component:
case DRM_MODE_CONNECTOR_9PinDIN:
output_type = ACPI_TV_OUTPUT;
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
case DRM_MODE_CONNECTOR_DisplayPort:
case DRM_MODE_CONNECTOR_HDMIA:
case DRM_MODE_CONNECTOR_HDMIB:
output_type = ACPI_DIGITAL_OUTPUT;
break;
case DRM_MODE_CONNECTOR_LVDS:
output_type = ACPI_LVDS_OUTPUT;
break;
}
opregion->acpi->didl[i] |= (1<<31) | output_type | i;
i++;
}
/* If fewer than 8 outputs, the list must be null terminated */
if (i < 8)
opregion->acpi->didl[i] = 0;
}
int intel_opregion_init(struct drm_device *dev, int resume)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_opregion *opregion = &dev_priv->opregion;
void *base;
u32 asls, mboxes;
int err = 0;
pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
DRM_DEBUG("graphic opregion physical addr: 0x%x\n", asls);
if (asls == 0) {
DRM_DEBUG("ACPI OpRegion not supported!\n");
return -ENOTSUPP;
}
base = ioremap(asls, OPREGION_SZ);
if (!base)
return -ENOMEM;
opregion->header = base;
if (memcmp(opregion->header->signature, OPREGION_SIGNATURE, 16)) {
DRM_DEBUG("opregion signature mismatch\n");
err = -EINVAL;
goto err_out;
}
mboxes = opregion->header->mboxes;
if (mboxes & MBOX_ACPI) {
DRM_DEBUG("Public ACPI methods supported\n");
opregion->acpi = base + OPREGION_ACPI_OFFSET;
if (drm_core_check_feature(dev, DRIVER_MODESET))
intel_didl_outputs(dev);
} else {
DRM_DEBUG("Public ACPI methods not supported\n");
err = -ENOTSUPP;
goto err_out;
}
opregion->enabled = 1;
if (mboxes & MBOX_SWSCI) {
DRM_DEBUG("SWSCI supported\n");
opregion->swsci = base + OPREGION_SWSCI_OFFSET;
}
if (mboxes & MBOX_ASLE) {
DRM_DEBUG("ASLE supported\n");
opregion->asle = base + OPREGION_ASLE_OFFSET;
opregion_enable_asle(dev);
}
if (!resume)
acpi_video_register();
/* Notify BIOS we are ready to handle ACPI video ext notifs.
* Right now, all the events are handled by the ACPI video module.
* We don't actually need to do anything with them. */
opregion->acpi->csts = 0;
opregion->acpi->drdy = 1;
system_opregion = opregion;
register_acpi_notifier(&intel_opregion_notifier);
return 0;
err_out:
iounmap(opregion->header);
opregion->header = NULL;
return err;
}
void intel_opregion_free(struct drm_device *dev, int suspend)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_opregion *opregion = &dev_priv->opregion;
if (!opregion->enabled)
return;
if (!suspend)
acpi_video_unregister();
opregion->acpi->drdy = 0;
system_opregion = NULL;
unregister_acpi_notifier(&intel_opregion_notifier);
/* just clear all opregion memory pointers now */
iounmap(opregion->header);
opregion->header = NULL;
opregion->acpi = NULL;
opregion->swsci = NULL;
opregion->asle = NULL;
opregion->enabled = 0;
}