blob: d3633f513ebcf28e5abc01c5c9a7c0b6f8ed1c66 [file] [log] [blame]
#ifndef __ASM_SH_PCI_H
#define __ASM_SH_PCI_H
#ifdef __KERNEL__
#include <linux/dma-mapping.h>
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
#define pcibios_assign_all_busses() 1
#define pcibios_scan_all_fns(a, b) 0
/*
* A board can define one or more PCI channels that represent built-in (or
* external) PCI controllers.
*/
struct pci_channel {
struct pci_channel *next;
struct pci_ops *pci_ops;
struct resource *io_resource;
struct resource *mem_resource;
unsigned long io_offset;
unsigned long mem_offset;
unsigned long reg_base;
unsigned long io_map_base;
};
extern void register_pci_controller(struct pci_channel *hose);
extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
struct pci_dev;
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
extern void pcibios_set_master(struct pci_dev *dev);
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't do dynamic PCI IRQ allocation */
}
/* Dynamic DMA mapping stuff.
* SuperH has everything mapped statically like x86.
*/
/* The PCI address space does equal the physical memory
* address space. The networking and block device layers use
* this boolean for bounce buffer decisions.
*/
#define PCI_DMA_BUS_IS_PHYS (1)
#include <linux/types.h>
#include <linux/slab.h>
#include <asm/scatterlist.h>
#include <linux/string.h>
#include <asm/io.h>
/* pci_unmap_{single,page} being a nop depends upon the
* configuration.
*/
#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
__u32 LEN_NAME;
#define pci_unmap_addr(PTR, ADDR_NAME) \
((PTR)->ADDR_NAME)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
(((PTR)->ADDR_NAME) = (VAL))
#define pci_unmap_len(PTR, LEN_NAME) \
((PTR)->LEN_NAME)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
#else
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
#ifdef CONFIG_PCI
/*
* None of the SH PCI controllers support MWI, it is always treated as a
* direct memory write.
*/
#define PCI_DISABLE_MWI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
unsigned long cacheline_size;
u8 byte;
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
if (byte == 0)
cacheline_size = L1_CACHE_BYTES;
else
cacheline_size = byte << 2;
*strat = PCI_DMA_BURST_MULTIPLE;
*strategy_parameter = cacheline_size;
}
#endif
#ifdef CONFIG_SUPERH32
/*
* If we're on an SH7751 or SH7780 PCI controller, PCI memory is mapped
* at the end of the address space in a special non-translatable area.
*/
#define PCI_MEM_FIXED_START 0xfd000000
#define PCI_MEM_FIXED_END (PCI_MEM_FIXED_START + 0x01000000)
#define is_pci_memory_fixed_range(s, e) \
((s) >= PCI_MEM_FIXED_START && (e) < PCI_MEM_FIXED_END)
#else
#define is_pci_memory_fixed_range(s, e) (0)
#endif
/* Board-specific fixup routines. */
int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res);
extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region);
/* Chances are this interrupt is wired PC-style ... */
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return channel ? 15 : 14;
}
/* generic DMA-mapping stuff */
#include <asm-generic/pci-dma-compat.h>
#endif /* __KERNEL__ */
#endif /* __ASM_SH_PCI_H */